Professional Documents
Culture Documents
KEY FEATURES
Combining Multiple Products in One Tiny Package
The CTR 8300 consolidates the features and functions of multiple devices into a • Ultra-compact half-rack width 1RU
single ultra-compact unit, including a microwave indoor unit (IDU), an design, with convection cooling (no
fans);
advanced Carrier Ethernet switch, a TDM Pseudowire adapter, and an IP/MPLS
Router. CTR 8300 has the flexibility to be deployed in a wide variety of backhaul • QPSK to 1024QAM Adaptive
or enterprise access applications with microwave/millimeter-wave or fiber Modulation for maximum channel
connectivity, all optimized for lowest possible CAPEX and OPEX. efficiency;
• L2VPN services
• Virtual Private LAN Service (VPLS)
Networking System Specifications • Virtual private wire service (VPWS)
• MPLS Fast Re-route (FRR)
Radio Networking • 1:N facility backup with Link protection
1
• MPLS-TP
• Up to 2-way IF connections per CTR 8300:
• CTR 8311 – one IF connection (SMA) Element and Network Management
• CTR 8312 – two IF connections (SMA) • Configuration via CLI or CTR Portal GUI
• Support for Aviat split-mount outdoor and indoor radio • Aviat ProVision EMS
1 1
units - ODU600, ODU600sp, ODU300hp, IRU600 • RMON1, RMON2, and port mirroring
• All-outdoor radios (ODR), via any fixed Ethernet interface • SNMP v1/v2 (v3 )
1
(Aviat WTM 3000 or 3rd party), and using external PoE or • RADIUS client
1
DC supply
• Fixed or Adaptive Coding and Modulation (ACM)
• QPSK or 16, 32, 64, 128, 256, 512, 1024 QAM Operating Environment and Power
• 2+0 Radio Channel Aggregation – L1LA-Lite • Operating Temperature: -5º to +55ºC (23º to 131ºF)
• 1+0, 1+1 Hot-Standby Radio with/without Space Diversity • Extended Operating temperature: -10º to +65ºC (14º to
• 2+0 Co-Channel Operation with/without XPIC 149ºF)
• Humidity: 0 to 93%, non-condensing
Synchronization • Altitude: 4,500 meters (15,000 ft.)
• Ethernet and PDH clock source and delivery options
• Input voltage: -48 VDC (SELV), nominal
• Synchronous Ethernet (ITU-T G.8262) • Input voltage range: -40.5 VDC to -60 VDC
• ESMC/SSM (ITU-T G.8264) • Power consumption: typically < 30W
• Precision Time Protocol (IEEE 1588v2)
• TDM G.823 3
Mechanical
Circuit Emulation/Pseudowire Services
• Supported on all T1/E1 interfaces • Dimensions: 43 mm (1RU) x 224 mm (W) x 200 mm (D),
• CES over Ethernet (MEF 8)
• Weight: 1.9 kg
1
Carrier Ethernet (Layer 2) Services To be enabled in a future software release
2
• Multi-QoS, Policing, Storm Control, Scheduling, Shaping RSVP-TE with OSPF only
3
• QoS: 8 COS, Scheduling, Policing, Storm Control, Shaping Excluding rack mounting hardware
_d(sf)_CTR8300_08Dec14
DATA SHEE T
The CTR 8540 from Aviat Networks is the industry’s first purpose built
microwave router. CTR merges the functionality of a microwave indoor unit
and cell site router into a single integrated solution which bridges both
microwave and Ethernet/IP/MPLS networking domains.
Key Features
• Compact 1RU (INU) and 2RU (INUe) shelf
options, supporting 3x IF connected
The Eclipse™ Packet Node Intelligent Node Unit is a highly
or 12 Ethernet connected RF units per
modular and scalable indoor unit that delivers a unique rack unit
combination of high capacity hybrid or all-packet transport, • Selection of hot swappable interface card
Carrier Ethernet/IP networking, and key convergence features, to options, including NxE1, NxE3, NxSTM1,
enable operators to transform their network to manage explosive NxFE and NxGigE.
traffic growth and prepare for the all-IP future. • Hybrid native-TDM plus native-Ethernet/
IP, or all-Ethernet/IP, transport.
system parameters
Gener al Per Link Per Node
Throughput/Capacity Range Native Carrier Ethernet/IP [1] 11 - 462 Mbit/s 2.77 Gbit/s
Native TDM 4-100x E1 100xE1
1, 3x E3 6x E3
1 , 2x STM1 2x STM1
Fixed Modulation Options Fixed QPSK, 16, 32, 64, 128, 256 QAM
Adaptive Coding and Modulation Modulation Options QPSK, 16, 64, 256 QAM
Coding Options Max Throughput, Max System Gain
Co-Channel Operation with XPIC Optional >20dB XPOL improvement
Error Correction LDPC
Adaptive Equalization 24 tap T/2 spaced feed-forward filter
Ethernet Specifications
Ethernet Standards Compliance Ethernet IEEE 802.3
User Ports, per Data Access Card (DAC) 3x 10/100/1000BaseT, 2x SFP Optical or Electrical
Networking Protocols IPv4 and IPv6
Switch Capacity 5x 1Gbit/s user ports + 6x backlplane ports
Maximum Frame Size 10000 bytes bi-directional
Throughput Acceleration (Frame Size Dependent) IFG & Preamble Suppression
Traffic Prioritization Per port based prioritization
VLAN Support 802.1Q, 802.1ad (Q-in-Q)
Flow Control IEEE 802.3x
Link Aggregation 802.1AX LAG, L1LA (proprietary)
OAM IEEE 802.1ag / ITU-T Y.1731
Monitoring Port and Channel Status Performance Graphs, RMON-1, Port and Channel
TDM Specifications
Interfaces per Data Access Card (DAC) NxE1 1 to 16x 2.048 Mbit/s (E1)
(Multple DACs of the same or different kind can be used per shelf) NxE3 1 to 3x 34.368 Mbit/s (E3)
E3 Mux 2x E3 to 2x16x E1 Mux, channelized
NxSTM1 Optical or Electrical 1x 155.52 Mbit/s (STM1)
STM1 Mux 1x STM1 to 63x E1 Mux
Standards Compliance
E1, E3 ITU-T Rec. G.703, G.823
STM1, Electrical ITU-T Rec. G.703, G.825
STM1, Optical ITU-T Rec. G.957, G.825
Protection
Link Protection options Hot-Standby, Space or Freq Diversity
Ring/Network Protection options Resiliant Wireless Packet Ring (RWPR TM)
IEEE 802.1w RSTP, ITU-T 6.8032 ERP
User Line Interface Protection 1+1: Ethernet, STM1, E3, E1
Payload Encryption
Payload Encryption Compliance, Key FIPS 197, AES-128/192/256
Synchroniz ation
Synchronization Options Synchronous Ethernet (G.8262)
IEEE 1588v2 frames passed transparently
E1 Line clock
Standards Compliance
EMC EN 301 489-1, EN 301 489-4 (EN 55022 Class A)
Operation ETS 300 019, Class 3.1E
Safety IEC 60950-1/EN 60950-1
Mechanical, Environmental
Plug-in card slots INU: 4; INUe: 10
Rack Height INU: 1RU; INUe: 2RU
Operating Temperature Guaranteed -5° to +55° C (23° to +131° F)
Fault and Configur ation Management
Protocol SNMP v2c (standard), v3 (optional)
Secure Management Encryption AES-128/256, DES, 3DES
Local/remote Configuration Tool Eclipse Portal
Network Management Aviat Networks ProVision™
All specifications are typical values unless otherwise stated, and are subject to change without notice.
[1] Maximum Ethernet Throughput is for one 80MHz RF channel, single polarization, for 64 byte frame sizes. Corresponding Airlink base capacity is 366 Mbit/s.
www.aviatnetworks.com
Aviat, Aviat Networks, and Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
Eclipse and Provision are trademarks or registered trademarks of Aviat U.S., Inc.
© Aviat Networks, Inc. (2011) All Rights Reserved. Data subject to change without notice. _d(sf)_EclipsePN_ETSI_12Dec11v2
DATASHEET
KEY FEATURES
• Compact 1RU (INU) and 2RU (INUe) shelf
The Eclipse™ Packet Node Intelligent Node Unit is a highly modular options, supporting 3x IF connected or 12
and scalable indoor unit that delivers a unique combination of Ethernet connected RF units per rack unit
high capacity hybrid or all-packet transport, Carrier Ethernet/IP • FIPS 140-2 Level 2 validated;
networking, and comprehensive Mission Critical Microwave features, FIPS 197 validated
enabling operators to prepare for the all-IP future. • Selection of hot swappable interface card
options, including NxDS1, NxDS3, NxOC3,
NxFE and NxGigE
• Hybrid native-TDM plus native-Ethernet/IP,
or all-Ethernet/IP, transport
PROTECT YOUR INVESTMENT • Compact, modular design enabling simple
expansion and upgrades
A highly modular architecture provides maximum protection of your invest- • High throughput, exceeding 460 Mbit/s per
ment.As your network and traffic requirements change over time, modules RF channel.
can be easily added to support additional radio directions or to change the • Co-channel operation with optional XPIC to
traffic mix to facilitate the smooth migration from legacy TDM to advanced double frequency channel capacity
Carrier Ethernet/IP. • QPSK to 256QAM, with hitless Adaptive Cod-
ing and Modulation (ACM) options
HIGHEST NODAL DENSITY • Carrier Ethernet features, including Sync-E
(G.8262), VLANs, and Ethernet OAM
The Eclipse Packet Node INU comes in two platform options, a 1RU INU or • High density Ethernet interface capability
a 2RU INUe which supports the highest nodal density in the smallest form with 6x Gigabit Ethernet ports per module
factor, enabling the compact aggregation nodes that support up to 5 Gbit/s of • Protected Configurations include Monitored
packet handling capacity. Hot Standby, Frequency and Space Diversity,
and 2+0 with L1 Link aggregation
HIGH SPEED PACKET TRANSPORT • Fully protected traffic ports: electrical and
optical Ethernet, and electrical T1 interfaces
Eclipse Packet Node represents the very latest generation of microwave • Integrated T1 Loop Switch
transmission, with a combination of advanced features to enable link speeds • Embedded Strong Security, featuring Pay-
up to 2.8 Gbit/s from a single compact and modular unit. load Encryption, Secure Management and
RADIUS client support
MA XIMIZING FREQUENCY EFFICIENCY AND UTILIZATION • Management support by Provision NMS and
Eclipse Portal
Adaptive Coding and Modulation, co-channel operation with XPIC, and opti-
• RoHS and WEEE compliant
mized packet transmission drives more throughput than ever before, while
also preserving valuable frequency resources.
SYSTEM PARAMETERS
GENER AL PER LINK PER NODE
Throughput/Capacity Range Native Carrier Ethernet/IP [1] 11 - 462 Mbit/s 2.77 Gbit/s
Native TDM 7 - 127x DS1 127x DS1
1, 3, 4x DS3 6x DS3
1 , 2x OC-3 2x OC3
Fixed Modulation Options Fixed QPSK, 16, 32, 64, 128, 256 QAM
Adaptive Coding and Modulation Modulation Options QPSK, 16, 64, 256 QAM
Coding Options Max Throughput, Max System Gain
Co-Channel Operation with XPIC Optional >20dB XPOL improvement
Adaptive Equalization 24 tap T/2 spaced feed-forward filter
ETHERNET SPECIFI CATIONS
Ethernet Standards Compliance Ethernet IEEE 802.3
User Ports, per Data Access Card (DAC) 3x 10/100/1000BaseT, 2x SFP Optical or Electrical
Networking Protocols IPv4 and IPv6
Switch Capacity 5x 1Gbit/s user ports + 6x backplane ports
Maximum Frame Size 10000 bytes bi-directional
Throughput Acceleration (Frame Size Dependent) IFG & Preamble Suppression
Traffic Prioritization Per port based prioritization
VLAN Support IEEE 802.1Q, 802.1ad (Q-in-Q)
Flow Control IEEE 802.3x
Link Aggregation 802.1AX LAG L1LA (proprietary)
OAM IEEE 802.1ag / ITU-T Y.1731
Monitoring Port and Channel Status Performance Graphs, RMON-1, Port and Channel
TDM SPECIFI CATIONS
Interfaces per Data Access Card (DAC) NxDS1 1 to 16x 1.544 Mbit/s (DS1)
(Multple DACs of the same or different kind can NxDS3 1 to 3x 44.736 Mbit/s (DS3)
be used per shelf) DS3 Mux 2x DS3 to 2x28x DS1 Mux, channelized
NxOC3 Optical or Electrical 1 or 2x 155.52 Mbit/s (OC3)
OC3 Mux 1x OC3 to 84x DS1 Mux
Standards Compliance DS1, DS3 ITU-T Rec. G.703, G.823
OC3, Electrical / Optical ITU-T Rec. G.703, G.825 / ITU-T Rec. G.957, G.825
PROTECTION
Link Protection options Hot-Standby, Space or Freq Diversity
Ring/Network Protection options Resilient Wireless Packet Ring (RWPRTM), IEEE 802.1w RSTP
ITU-T G.8032 ERP
User Line Interface Protection 1+1: Ethernet, OC3, DS3, DS1
SECURIT Y COMPLIANCE
Security and Encryption Optional FIPS 197 validated, 128/256-bit AES encryption
Optional FIPS 140-2 Level 2 validated
SYNCHRONIZ ATION
Synchronization Options Synchronous Ethernet (G.8262)
IEEE 1588v2 frames passed transparently
DS1 Line clock
STANDARDS COMPLIANCE
EMC FCC CFR 47, Part 15
Operation EN 300 019, Class 3.1E
Safety UL 60950-1
NEBS GR-1089-CORE, GR-63-CORE
Electric power substations IEEE 1613
MECHANICAL, ENVIRONMENTAL
Plug-in card slots INU: 4; INUe: 10
Rack Height INU: 1RU; INUe: 2RU
Operating Temperature Guaranteed -5° to +55° C (23° to +131° F)
Humidity Guaranteed 0 to 95%, non-condensing
FAULT AND CONFIGUR ATION MANAGEMENT
Secure Management Encryption AES-128/256, DES, 3DES
Local/remote Configuration Tool Eclipse Portal
Network Management Aviat Networks ProVision™
All specifications are typical values unless otherwise stated, and are subject to change without notice.
[1] Maximum Ethernet Throughput is for one 80MHz RF channel, single polarization, for 64 byte frame sizes. Corresponding Airlink base capacity is 366 Mbit/s.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks, and Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
© Aviat Networks, Inc. (2011-2016) All Rights Reserved. Data subject to change without notice. _d(sf)_EclipsePN_ANSI_14JUL2016
ANSI DATASHEET
When you can’t sacrifice reliability for high capacities, the Eclipse™ IRU 600v4
represents the ultimate in high performance, high reliability and the highest capacity
Mission Critical Microwave. The IRU 600v4 is the industry’s most secure radio with
the highest transmit output power available with extra transmit power (+ 40 dBm or
5 times more than high power) and is the industry's highest capacity all-indoor radio
built for Mission Critical Applications.
General
Frequency Band options 5.8, L6, U6, FCC 7, 7, 8, 10.5 and 11 GHz
Modulation and Coding Options Fixed and Adaptive QPSK, 16, 32, 64, 128, 256, 512, 1024, 2048 and 4096 QAM
Channel Sizes Supported 3.75, 5, 10, 12.5, 20, 25, 30, 40, 60 and 80 MHz
Capacity Support Airlink Capacity 8-716 Mbit/s
Ethernet / IP Throughput 15-940 Mbit/s
Native TDM 5 to 127 DS1, 2xOC3, 6xDS3
Electrical and Mechanical
Power Consumption, typical unless stated 32.0 dBm 31.0 dBm 29.5 dBm 29.0 dBm 28.0 dBm 25.0 dBm 21.0 dBm 20.0 dBm TX Muted
1+0 SP/HP unit 5.8 GHz NA NA NA 62W NA 55W 48W 43W
NA
1+0 SP/HP unit L6/U6/FCC 7 GHz 1+0 62W NA NA NA NA 55W NA 48W 43W
1+0 SP/HP unit (guaranteed) 7/8 GHz NA 62W NA NA 58W NA 54W NA 43W
1+0 SP/HP unit 10.5/11 GHz NA NA 60W NA NA 55W NA 48W 43W
37.5 dBm 36.0 dBm 35.0 dBm 34.0 dBm 33 dBm 32.0 dBm 27.5 dBm 27.0 dBm 26.0 dBm 25.0 dBm TX Muted
1+0 EHP unit L6 GHz 113W NA NA 95W NA 85W 77W NA NA NA 46W
1+0 EHP unit U6/FCC 7 GHz 119W NA NA 102W NA 90W 83W NA NA NA 46W
1+0 EHP unit 7 GHz NA 116 W NA NA 99 W NA NA NA 87W NA 43W
1+0 EHP unit 8 GHz NA NA 116 W NA NA 99 W NA NA NA 87W 43W
1+0 EHP unit 11 GHz NA NA NA NA 97 W NA NA 87W NA NA 46W
Size / Weight (1+1 configuration) SP/HP units EHP units
ACU+Chassis+2RFU (includes waveguide terminator) 2RU 3.5 x 19 x 16.25 in, 88 x 482 x 412 mm 32.5 lb / 14.7 kg 33.9 lb / 15.4 kg
Chassis+2 RFU 2RU 3.5 x 19 x 12 in, 88 x 482 x 304 mm 28.0 lb / 12.7 kg 29.5 lb / 13.4 kg
Environmental
OperatingTemperature Guaranteed -10° to +55° C (14° to +131° F)
Humidity & Altitude 0 to 95%, non-condensing, 4,500 meters(15,000 ft) AMSL
Standards Compliance
EMC FCC CFR 47, Part 15, ICES-003
Operation, Storage, Transportation EN 300 019, Class 3.1E, EN 300 019, Class 1.2, EN 300 019, Class 2.3
Safety UL 62368-1, CAN/CSA C22.2 No. 62368-1-14
Electric Power Substations [1] IEEE 1613
Radio Frequency FCC Part 15.407, ISED RSS-247, Issue 2 (5.8 GHz only), FCC CFR 47, Part 101, ISED Canada’s SRSPs (L6 to 11GHz)
NEBS [2] GR-1089-CORE,GR-63-CORE
Security FIPS 197 validated (Certificate #C5), FIPS 140-2 validated (Certificate #3558)
IF Specifications
IF Frequency Transmit/Receive 311 MHz/126 MHz
IF Cable Length 1000 ft (300m) max (limitation apply)
Test Point RSSI Monitoring Point [3] Test Points female
TX Monitoring Port SMA female
Emission Designators
3.75MHz 5MHz 10 MHz 12.5 MHz 20MHz 25MHz 30 MHz 40 MHz 60 MHz 80 MHz
QPSK 3M75G7W 5M00G7W 10M0G7W 12M5G7W 20M0G7W 25M0G7W 30M0G7W 40M0G7W 60M0G7W 80M0G7W
QAM 3M75D7W 5M00D7W 10M0D7W 12M5D7W 20M0D7W 25M0D7W 30M0D7W 40M0D7W 60M0D7W 80M0D7W
Transmitter Specifications
Transmit Power Tolerance -0 +1 dB
Transmitter Source Synthesized
Frequency Stability ±5 ppm
Manual Transmitter Power Control Range Configurable in 0.1 dB steps from min to max power levels
(Refer to TX Power Specifications)
Resolution 0.1 dB
Automatic Transmitter Power Control Range Configurable over full available manual attenuation range
Resolution / Speed 0.1 dB steps / 6 dB per second
Synthesizer Resolution 5 KHz
Channel Selection By software control within tuning range of RFU
Transmitter Mute > 50 dB
Receiver Specifications
Receiver Source Synthesized
Frequency Stability ±5 ppm
Receiver Overload BER = 1E-6 -22 dBm
No damage 0 dBm
Regarding EHP L6 and U6 when using unpaired frequencies, see Eclipse user Manual for “Small non-standard T/R spacings”.
[1] Complies with the exception of clause 3.1.1 (operational temperature range) and clause 10 (device cooling).
[2] IRU 600v4 complies in all areas except for R9-16 and R10-5, GR-1089-CORE. INU complies in all areas except for R10-5, GR-1089-CORE and
R4-34, O4-35, O4-36, GR-63-CORE.
[3] RSSI accuracy applies when there is no potential interferer signal present within +/- 10MHz of the Rx. Frequency.
DISCLAIMER
This material is for informational purposesonly and does not constitute a legal obligation to deliver any product, feature or functionality and should not be relied upon in making purchasing decisions. All
specifications are guaranteed values,at room temperature(20to30ºC, 68to 86ºF),referenced to theACUantenna port(including ACU losses)unless otherwise stated,and are subject to change without notice.
The development, release and timing ofanyfeatures orfunctionality described for ourproducts is at Aviat Networks’sole discretion.For details of availability, please contact our AviatNetworks Sales
Representative.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and the Aviat logo are trademarks or registered trademarks of
Aviat Networks,Inc. _d(f)_IRU600v4_RAC70_22April2020
Datasheet
Aviat ODU 600v2
CTR 8500-8300 ANSI
CTR Compatibility
CTR 8540 Radio Access Cards (RACs) RACx1 and RACx2
Indoor Units (IDUs) CTR 8300
Environmental
Operating Temperature Guaranteed -33° to +55°C (-27° to +131°F)
Extended -50° to +65°C [2]
Humidity Guaranteed 100%
Altitude Guaranteed 4500 M (15,000 ft)
Standards Compliance
Operation EN 300 019-2-4, Class 4.1 (ODU 600, CTR 8380)
EN 300 019-2-3, Class 3.1E (CTR 8540, CTR 8311, CTR 8312)
EMC EN 301 489-1, EN 301 489-4
Safety IEC/EN 60950-1, IEC/EN 60950-22, IEC/EN 62368-1
RF Performance EN 302 217-2
Security
Payload Encryption Compliance FIPS 197 AES #4620 (CTR 8300)
AES #4621 (CTR 8540)
Connectors
IF Cable connector N-Type
Antenna port Interface Direct and Remote Antenna Mount [3]
Transmitter Specifications
Transmitter Specifications
Manual Transmitter Power Control Range 0-25 dB [4]
Automatic Transmitter Power Control Range Configurable over the full available manual attenuation range
available
Transmitter Mute > 50 dB
System
Frequency Band L6/U6 GHz 7 GHz 8 GHz 10 GHz
Frequency Range (GHz) 5.925-7.110 GHz 7.107-7.900 GHz 7.7-8.5 GHz 10.15-10.68 GHz
TR-Spacings Supported (MHz) 160, 170, 180, 240, 119, 126, 151.614, 195, 350, 65
252.04, 340, 345 208, 266, 310,311.32,
305.56
Maximum Tuning Range 210 112 196 148
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R70 (WR137) R84 (WR112) R84 (WR112) R100 (WR90)
Flange Type UDR70 UDR84 UDR84 UDR100
Mating Flange Type [5] PDR70 or CDR70 PDR84 or CDR84 PDR84 or CDR84 PDR100 or CDR100
Frequency Band 11 GHz 13 GHz 15 GHz 18 GHz
Frequency Range (GHz) 10.7-11.7 GHz 12.75-13.25 GHz 14.5-15.35 GHz 17.7-19.7 GHz
TR-Spacings Supported (MHz) 490, 530 266 315, 322, 420, 490, 1008, 1010, 1092.5,
644, 728 1120, 1560
Maximum Tuning Range 305 142 261 605
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R100 (WR90) R140 (WR62) R140 (WR62) R220 (WR42)
Flange Type UDR100 UBR140 UBR140 UBR220
Mating Flange Type [5] PDR100 or CDR100 PBR140 or CBR140 PBR140 or CBR140 PBR220
Frequency Band 23 GHz 26 GHz 28 GHz 32 GHz
Frequency Range (GHz) 21.2-23.6 GHz 24.549-26.472 GHz 27.5-29.5 GHz 31.8-33.4 GHz
TR-Spacings Supported (MHz) 1008,1232 1008 1008 812
Maximum Tuning Range 616 467 513.5 407
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R220 (WR42) R260 (WR34) R320 (WR28) R320 (WR28)
Flange Type UBR220 UBR260 UBR320 UBR320
Mating Flange Type PBR220 PBR260 PBR320 PBR320
Frequency Band 38 GHz 42 GHz
Frequency Range (GHz) 37.0-39.5 GHz 40.5-43.5 GHz
TR-Spacings Supported (MHz) 1260 1500
Maximum Tuning Range 590 742
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R320 (WR28) R400 (WR22)
Flange Type UBR320 UG-383/U
Mating Flange Type PBR320 UG-383/U
Receiver Specifications
Frequency Stability ± 5 ppm
Receiver Overload BER = 1E-6 -20 dBm
Residual (Background) Bit Error Rate Better than 1E-13
Disclaimer:
This material is for informational purposes only and does not constitute a legal obligation to deliver any product, feature or functionality and
should not be relied upon in making purchasing decisions. All specifications are guaranteed values, at room temperature (20 to 30ºC, 68 to
86ºF), referenced to the ACU antenna port (including ACU losses) unless otherwise stated, and are subject to change without notice. The
development, release and timing of any features or functionality described for our products is at Aviat Networks’ sole discretion. For details of
availability, please contact your Aviat Networks Sales Representative.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and the Aviat logo are trademarks or registered trademarks of Aviat
Networks, Inc.
Copyright © Aviat Networks, Inc. (2021) All Rights Reserved. Data subject to change without
notice.
Eclipse Compatibility
Radio Access Cards (RACs) RAC 60 and RAC 70
Environmental
Operating Temperature Guaranteed -33° to +55°C (-27° to +131°F)
Extended -40° to +65°C (-40° to +149°F)[2]
Humidity Guaranteed 100%
Altitude Guaranteed 4500 M (15,000 ft)
Standards Compliance
EMC FCC CFR 47, Part 15, ICES-003
Operation EN 300 019-2-4, Class 4.1 (ODU 600)
EMC EN 301 489-1, EN 301 489-4
Safety UL 60950-1, UL 60950-22, UL 62368-1
RF Performance All federal frequencies FCC CFR 47, Part 101
Manual of Regulations for Federal Radio Frequency Management
Water Ingress IEC 60529, IPX6
Lightning Protection Internal, compliant to IEC 61000-4-5, Class 5
Electric power substations IEEE 1613
Security with Eclipse INUe FIPS 197 validated (Certificate #C5)
FIPS 140-2 validated (Certificate #3558)
IF Specifications
IF Frequency Transmit 311 MHz
Receive 126 MHz
IF Cable Length CNT-400 300 Meters
IF Cable Connector
IF Cable connector N-Type
AGC monitor point BNC
Antenna port Interface Direct and Remote Antenna Mount
Polarization, field selectable ODU Rotation
RAC 70
IF Connector SMA
LED Indicators 2 x Tri-state
Dimensions inc Connectors 22mm(0.5RU) x 130mm x 268mm
Weight <0.38Kg
Power Consumption 13 Watts
Transmitter Specifications
Transmitter Specifications
Transmit Power Tolerance 6-26 GHz [5] ± 2.0 dB
38 GHz ± 2.5 dB
Transmitter Source Synthesized
Frequency Stability ± 5 ppm
Manual Transmitter Power Control Range Configurable in 0.1 dB steps from min to max power levels [4]
(Refer Tx Power Specifications)
Automatic Transmitter Power Control Range Configurable over the full available manual attenuation range
Resolution / Speed available
0.1 dB steps / 6 dB per second
Synthesizer Resolution 250 kHz
Transmitter Mute > 50 dB
System
Frequency Band L6/U6 GHz FCC 7 GHz 7 GHz 8 GHz
Frequency Range (GHz) 5.925-7.125 GHz 6.875-7.125 GHz 7.125-7.9 GHz 7.7-8.5 GHz
TR-Spacings Supported (MHz) 160, 170, 180, 240, 150 150, 160, 175, 300 300, 310, 360
252.04, 266, 340, 345
Standard FCC Part 101 FCC Part 74 & 101 SRSP 307.1 SRSP 307.7
SRSP 306.4 & 305.9 NTIA Red Book NTIA Red Book
Maximum Tuning Range 210 50 180 196
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R70 (WR137) R70 (WR137) R84 (WR112) R84 (WR112)
Frequency Band 10.5 GHz 11 GHz 13 GHz 15 GHz
Frequency Range (GHz) 10.5-10.68 GHz 10.7-11.7 GHz 12.7-13.15 GHz 14.4-15.35 GHz
TR-Spacings Supported (MHz) 65 490, 500, 520, 530 225 475, 640
Standard FCC Part 101 FCC Part 101 FCC Part 74 & 101 SRSP 314.5
SRSP 310.5 SRSP 310.7 NTIA Red Book
Maximum Tuning Range 10 305 125 261
(Dependent upon T-R Spacing (MHz))
Antenna Waveguide Type R100 (WR90) R100 (WR90) R140 (WR62) R140 (WR62)
Frequency Band 18 GHz 23 GHz 26 GHz [4] 38 GHz
Frequency Range (GHz) 17.7-19.7 GHz 21.2-23.6 GHz 24.549-26.472 GHz 38.6-40.0 GHz
TR-Spacings Supported (MHz) 1560, 340 1200, 1232 1008 700
Standard FCC Part 101 FCC Part 101 SRSP 325.25 FCC Part 101
SRSP 317.8 SRSP 321.8 NTIA Red Book SRSP 338.6
NTIA Red Book
Maximum Tuning Range 440 616 467 400
(Dependent upon T-R Spacing (MHz))
System
Antenna Waveguide Type R220 (WR42) R220 (WR42) R260 (WR34) R320 (WR28)
Receiver Specifications
Receiver Source Synthesized
Frequency Stability ± 5 ppm
Receiver Overload BER = 1E-6 -20 dBm
Residual (Background) Bit Error Rate Better than 1E-13
RSSI Accuracy [3] -20 to -30 dBm (-27° to +131°F) ± 3.5dB
-30 to -70 dBm (-27° to +131°F) ± 2.5dB
-70 to -90 dBm (-27° to +131°F) ± 3.5dB
Disclaimer:
This material is for informational purposes only and does not constitute a legal obligation to deliver any product, feature or functionality and
should not be relied upon in making purchasing decisions. All specifications are guaranteed values, at room temperature (20 to 30ºC, 68 to
86ºF), referenced to the ACU antenna port (including ACU losses) unless otherwise stated, and are subject to change without notice. The
development, release and timing of any features or functionality described for our products is at Aviat Networks’ sole discretion. For details of
availability, please contact your Aviat Networks Sales Representative.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and the Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
Copyright © Aviat Networks, Inc. (2021) All Rights Reserved. Data subject to change without notice.
General Specifications
Radio Networking
Frequency Bands 4, L6/U6, 7, 8, 10, 11, 13, 15, 18 ,23, 28, 32 and 38 GHz
Modulation and Coding Options Fixed and Adaptive QPSK, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 QAM
Channel Sizes Supported 3.75, 5, 10, 20, 25, 30, 40, 50, 60, 80, 100 MHz
Capacity Range Airlink Capacity up to 725 Mbit/s (single channel WTM 4100) or 1450 Mbit/s (dual channel
operation WTM 4100 with A2C, or WTM 4200)
Ethernet / IP Throughput up to 2500 Mbit/s, single or dual channel, with Multi-Layer Header
(with IFG/PA Suppression) Compression (actual throughput dependent upon traffic/frame size mix)
Configuration Options 1+0 with optional Space Diversity
2+0 Co-Channel Operation with/without XPIC
2+0 Radio Channel Aggregation with Layer 1 Link Aggregation (L1LA)
4+0 LAG with/without LOS MIMO (up to 5Gbps)
Design Tools Recommended Aviat Design™ on aviatcloud.com (includes MIMO, Multi-band)
Supported Pathloss 5 (basic support only)
Transmitter Specifications
High Power up to +30.5 dBm
Frequency Stability ± 5 ppm
Manual Transmitter Power Control Range 0 - 25 dB
Automatic Transmitter Power Control (ATPC) Range Configurable over the full available manual attenuation range
available
Transmitter Mute > 50 dB
Receiver Specifications
Frequency Stability ± 5 ppm
Receiver Overload BER=1x10-6 -20 dBm
Max Receiver Input Level BER=1x10-3 0 dBm
Residual (Background) Bit Error Rate 1x10-13
User Interfaces
Traffic 2x 10/100/1000Base-T (RJ-45) fixed electrical ports (one port optional PoE)
2x optional SFP ports – 1, 2.5 or 10GB SFP+ (optical/electrical)
DC Power Supply Input +24/-48Vdc (SELV) wide-mouth
Console Maintenance Ports USB
Receive Signal Indicator dual voltmeter pins
Synchronization
Synchronous Ethernet ITU-T G.8262
ESMC/SSM ITU-T G.8264
Precision Time Protocol IEEE 1588v2 – TC/BC
Standards Compliance
Operation: EN 300 019 Class 4.1
EMC: FCC CFR47, Part 15
ICES-003
Electric Power Substations: IEEE 1613
Safety: UL 60950-1, UL 62368-1
UL 60950-22
RF Performance: FCC CFR47 Part 101, NTIA Red Book
Water Ingress: IEC 60529, IPX6
Lightning Protection (internal): IEC-61000-4-5, Class 5
Security FIPS 197 validated (certificate A980)
Disclaimer:
This material is for informational purposes only and does not constitute a legal obligation to deliver any product, feature or functionality and
should not be relied upon in making purchasing decisions. All specifications are guaranteed values, at room temperature (20 to 30ºC, 68 to
86ºF), referenced to the ACU antenna port (including ACU losses) unless otherwise stated, and are subject to change without notice. The
development, release and timing of any features or functionality described for our products is at Aviat Networks’ sole discretion. For details of
availability, please contact your Aviat Networks Sales Representative.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and the Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
Copyright © Aviat Networks, Inc. (2021) All Rights Reserved. Data subject to change without notice.
General Specifications
Radio Networking
Frequency Bands E-Band: 71-76, 81-86 GHz; Microwave: 15, 18, 23 GHz
Modulation and Coding Options E-Band: QPSK, 16, 32, 64, 128, 256 QAM; Microwave: 4 to 4096 QAM; Hitless ACM
Channel Sizes Supported E-Band: 250, 500, 750, 1000, 1500, 2000 MHz; Microwave: 7 to 112 MHz
Capacity Range Up to 10,000 Mbit/s (1+0, Single Channel)
Up to 10,000 Mbit/s (2+0, Multi-Band)
Up to 10,000 Mbit/s (2+0, XPIC)
Up to 20,000 Mbit/s (2+0, Dual Channel)
Configuration Support 1+0 & 2+0, with optional XPIC (E-Band only)
Bandwidth Acceleration Inter-Frame Gap and Pre-Amble Suppression
Payload Encryption AES256
Design Tools Recommended Aviat Design™ on aviatcloud.com (includes MIMO, Multi-band)
Supported Pathloss 5 (basic support only)
Transmitter (E-Band)
Maximum Tx Power +16.5 dBm (at QPSK)
Frequency Stability ± 10 ppm
Power Control Fixed or Automatic Transmitter Power Control (ATPC)
Receiver (E-Band)
Frequency Stability ± 10 ppm
Receiver Overload BER=1x10-6 -20 dBm
-5 dBm (no damage)
Residual (Background) Bit Error Rate 1x10-13
User Interfaces
Traffic 2x 10/100/1000Base-T (RJ-45) fixed electrical ports (one port optional PoE)
2x optional SFP ports – 1, 2.5 or 10GB SFP+ (optical/electrical)
DC Power Supply Input +24/-48Vdc (SELV) wide-mouth
Console Maintenance Ports USB
Receive Signal Indicator dual voltmeter pins
Synchronization
Internal Stratum-3 clock
Synchronous Ethernet ITU-T G.8262
ESMC/SSM ITU-T G.8264
Precision Time Protocol IEEE 1588v2 – TC/BC
Standards Compliance
Operation: EN 300 019 Class 4.1
EMC: FCC CFR47, Part 15
ICES-003
Safety: UL 60950-1, UL 62368-1
UL 60950-22
RF Performance: FCC Part 101, NTIA Red Book (15GHz)
Water Ingress: IEC 60529, IPX6
Lightning Protection (internal): IEC-61000-4-5, Class 5
Security FIPS 197 validated (certificate A1073)
Disclaimer:
This material is for informational purposes only and does not constitute a legal obligation to deliver any product, feature or functionality and
should not be relied upon in making purchasing decisions. All specifications are guaranteed values, at room temperature (20 to 30ºC, 68 to
86ºF), referenced to the ACU antenna port (including ACU losses) unless otherwise stated, and are subject to change without notice. The
development, release and timing of any features or functionality described for our products is at Aviat Networks’ sole discretion. For details of
availability, please contact your Aviat Networks Sales Representative.
WWW.AVIATNETWORKS.COM
Aviat, Aviat Networks and the Aviat logo are trademarks or registered trademarks of Aviat Networks, Inc.
Copyright © Aviat Networks, Inc. (2021) All Rights Reserved. Data subject to change without notice.