You are on page 1of 1

Pedal board

Return Send

The Carl Martin Paraloop helps to bridge the gap between digital effects
and analog signals.
When using digital multi-effects through amplifiers with only serial fx-
loops, using the Paraloop will allow you to adjust the amount of digital fx
signal or the amount of analog signal you prefer (with the Wet/Dry Control
Knob), or with a Bypass switch to take the entire digital effects unit out of
the loop.
Allowing a certain percentage of analog signal to remain under your digi-
tally affected signal, creates a fuller, richer tone….just ask Carl!

SPECIFICATIONS
Power.............................. 9V DC Dimension..................120/95/45
9V DC adapter plug (+ on ring) Weight:........................ 0,350 Kg
Power consumption..........10 mA
S/N ratio............................ 62 dB
Input..............................1m Ohm
Output..........................100 Ohm
Send............................ 100 Ohm
Return...........................1M Ohm

You might also like