Professional Documents
Culture Documents
Tiler Final NVQ Practical Sheet
Tiler Final NVQ Practical Sheet
PRACTICAL NO: 01
Tiler NVQ Level 3 Practical
INTRODUCTION
This document describes the procedure of surface preparation and
setting out for the preparation of the tile bed.
PROCEDURE
o Surface cleaning
o Marking of the level for the tile bed
o Preparation of the surface for tile bed
o Establishment of horizontal and vertical guide points
o Establishment of guide points for slopes
Tiler NVQ Level 3 Practical
PRACTICAL NO : 02
PREPARATION OF THE TILE BED FOR A WALL TILE AND FLOOR TILE
INTRODUCTION
PROCEDURE
PRACTICAL NO: 03
PREPARATION OF A LAYOUT PLAN FOR TILING
INTRODUCTION
Obtaining knowledge on tile layout patterns and identification of the
patterns with minimum wastage.
PROCEDURE
Prepare various tile arrangement patterns for the following and
find the arrangement with the minimum wastage and best quality.
Assume tile size 2’*1’
Find the arrangement with least wastage
5’
Tiler NVQ Level 3 Practical
PRACTICAL NO: 04
CUTTING OF TILES
INTRODUCTION
Obtaining experimental knowledge about tile cuts and the machinery
used
PROCEDURE
PRACTICAL NO: 05
INSTALLATION OF FLOOR TILES
INTRODUCTION
Obtaining experimental knowledge about application of tile adhesives,
installation and levelling of tiles.
PROCEDURE
Preparation of tile adhesives
Application of tile adhesives
Installation of tiles according to the center lines correctly
Proper levelling of tiles for the finished level
Proper usage of tile spacers
Arranging tiles according to the alignment of the tile spaces
Cutting and installation of proper tile pieces when necessary
Tiler NVQ Level 3 Practical
PRACTICAL NO : 06
INSTALLATION OF WALL TILES
INTRODUCTION
Obtaining experimental knowledge about application of tile adhesives
and the proper installation of wall tiles.
PROCEDURE
PRACTICAL NO: 07
INTRODUCTION
Obtaining experiment knowledge on application of tile grout, grout
sealers and trim edges
PROCEDURE
Preparation of tile grout according to the thickness of the tile
spaces
Proper application of tile grout into tile spaces
Usage of trim edges where necessary
Cleaning of grout on tiles
Application of grout sealers
Tiler NVQ Level 3 Practical
අයදුම්කරුගේ නම
ජාතික හැඳුනුම්පත් අංකය
දිනය
ඇගයීම (සාමාන්ය)
1) නියමිත වෙලාවට වැඩ ආරම්භ කිරීම හා අවසන් කිරීම
2) නියමිත ආවුද හා උපකරණ භාවිතා කිරීම
3) නිවැරදි ශිල්ප ක්රම අනුගමනය කිරීම
4) නිවැරදි ආරක්ෂක පූර්වෝපායන් යොදා ගැනීම
5) ආකල්පමය වශයෙන් සාමූහික කටයුතු කිරීමේ හැකියාව
6) ක්රියාව අවසානයේදී නිවැරදි ස්ථානවල ආවුද හා උපකරණ ස්ථානගත කිරීම
ඇගයීම්කරුවන්ගේ සටහන
……………………………………අයදුම්කරු කම්බි නැවීම ඇගයීමේ සමත් /
තවදුරටත් පුහුණ විය යුතු බව සදහන් කරමු
01. උපදේශක
නම
අත්සන