Professional Documents
Culture Documents
Annexure - 3 Catalogue
Annexure - 3 Catalogue
POSSIBILITIES
Incredibly Reliable, Easy to Use, and Powerful!
SUSTAINABLE FLEXIBLE
COMMITMENT
feature
• Maintain network communications
even during loss of main input power
TO YOU
One for All
• Precise and tuning-less motor control
with one drive controlling any induc-
tion, permanent magnet or synchro-
nous reluctance motor
Convenient Set-up
and Monitoring
• Safe programming without main power
connected
• Cloud-connected DriveWizard Mobile
app for drive management on smart-
phones and tablets.
Integrated Functional
Flexibility, ease of use and a sustainable Safety
• Increased safety and reliability
design for the best value proposition in with STO SIL3 functional safety
Network integration
benefits/features:
PLC Easy integration into your network
• Supports all major networks and topologies
• Network compliance tested
• Network up to 5 drives with a single com-
munication card
RS485
Motor control
benefits/features:
INDUCTION Flexible Motor Control
MOTORS INTERIOR • Tuning-less with EZ vector
PERMANENT • Open/closed loop speed or torque
MAGNET control/synchronous reluctance
motors
• Induction/permanent magnet
SURFACE motors
PERMANENT
• 590 Hz output frequency *
MAGNET
• Zero speed control without encoder
Energy savings
SYNCHRO-
• Automatic energy efficiency
NOUS optimization function
RELUCTANCE
100
2 % IMPROVEMENT FOR PM MOTORS
90 Maximum Efficiency
80 By introducing motor speed control as a re-
placement of gears, valves or dampers the
70 GA700 unlocks great energy saving potential
Efficiency [%]
EASY
Keypad
Copy Function benefits/features:
Multiple sets of param-
eters can be stored Reduce set-up time
and easily transferred
(copied) to additional • Start-up wizard
drives • Favorite parameter/monitor
Micro SD Storage function
Micro SD for data • Copy function integrated into
logging storage the keypad
• Parameter set is backward
compatible with previous gener-
Hi-Resolution Display ation drive products
• Fast navigation
Contrast control offers
• Help function
clear and readable full-
text descriptions
Drive parameter management
Real-Time Clock • Storage of up to 4 drive
Real-time clock for parameter sets
time stamp of fault • Data logging with real time
information (battery stamp e.g. for fault analysis,
compartment load profile analysis etc. (up to
Automatic Backup
in back) 32 GB on a Micro SD card)
Function
• Fault logging with real time
Saves the current stamp for better analysis
parameter settings • Multiple parameter storage
after a period of user • Automatic parameter back-up
inactivity. After an
incident, settings can
Easy to use
be retrieved from the
keypad in a couple of Optional LCD • LCD keypad with Bluetooth®
seconds. KEYPAD WITH option
BLUETOOTH® • Display contrast control
Wireless commu- • Real-time clock with time stamp
nication capability • Tactile feel buttons
between the mobile • Remote mounting of keypad
device and drive using standard RJ45 extension
cable
Advanced
Keypad Navigation
Faster scrolling and function
unction
keys offer faster navigation
gation and
short-cuts reducing program-
ming time
Start-up Wizard
Reduce basic set-up time to minutes using the start-up wizard without any drive parameter knowledge
Powerful
configuration tools
DriveWizard® is an offline/online parameter and drive configuration tool. The
easy and intuitive tool is used for set-up, maintenance and troubleshooting
offering parameter editing, storing and file comparison as well as online
trending using the highly functional oscilloscope feature.
Customizable EASY
Application Toolbox
benefits/features:
Drive Management
with DriveWizard®
• Parameter management
• Online manual
• Report generation and export data
• 6 channel scope function
• Real-time monitoring
• Access through USB, EtherNet/IP,
Modbus TCP/IP, or PROFINET
• Automatic parameter conversion
from previous series drives
Customizable
with DriveWorksEZ®
• Icon-based graphics
• Drag-n-drop graphical interface
• Select from 400+ function blocks
• Access to I/Os, network interfaces,
drive parameters and monitors
• Logic/math functions
• Timers/counters
• Subroutine creation
• Up to 200 connections
Easy Programming
DriveWorksEZ® is the intuitive graphi-
cal programming environment for the
GA700. You create the customized func-
tion for your application in shortest time
by dragging and droping function blocks.
The online diagnosis tool supports test-
ing.
EASY
CONVENTIONAL
DRIVE
EASY
Enhanced Product
REDUCED benefits/features:
CABINET
SIZE
Installation ease –
panel/enclosure
• IP20 standard
• NEMA Type 1 kit optional
• NEMA Type 12/IP55 protected heatsink
• Coated boards
Side-By-Side Mounting • Side-by-side mounting
• Built-in braking chopper
The GA700 can be mounted side-by-side with bottom entry (up to 75 kW (HD))
wiring to reduce cabinet size.
Reduce harmonics/
emissions
• Built-in EMC filter, possible to disable
• Built-in DC reactor
(22kW (HD) and above
Inside of Outside of
enclosure enclosure
Horizontal Mounting
The GA700 can be horizontally mounted
up to 75 kW (HD)
Integrated EASY
functional safety
With the a built in dual channel STO (safe torque off) circuit and EDM signal
(electronic device monitor) the GA700 provides the right tools for an easy
integration of emergency stop functions into machines, even when higher
levels of safety are required.
CONVENTIONAL
DRIVE
SE D SA
EA F
E
R
C
T
IN
Operating Environment
Ambient temperature -10 to +50 °C; up to +60 °C with derating at 2% per degree rise in temperature
Storage temperature -40 to +70 °C
Humidity 95 % RH or less (non-condensing)
Altitude
Protection design IP20 standard, NEMA Type 1-Kit (optional), IP55/NEMA Type 12 external heatsink (factory option)
Mounting Horizontal (0.75 kW to 75 kW (HD))
Environmental conditions IEC 60721-3-3, Class 3CS (chemical gases), Class 3S2 (solid particles)
Conformity / Standards
Standards CE, UL, cUL, EAC, RoHS
Safe Torque Off (STO) according to IEC 61800-5-2, tested according IEC/EN61508 (SIL3) and
Functional safety
ISO/EN13849-1 (Pl e, Cat. 3); TÜV Süd certified
Power Ratings
Overload capacity
Rated voltage
Output frequency
Carrier frequency 400V Class: 2-15 kHz up to 55 kW (ND); 2-10 kHz from 75 kW to 220 kW (ND);
2 kHz from 250 kW to 355 kW (ND)
DC Choke built-in above 22 kW (HD)
Braking chopper built-in upto 75 kW (HD)
Control / Programming
8 digital (sink/source), 3 analog (current/voltage), 1 pulse (HTL, max. 32 kHz),
Control inputs
24 Vdc power supply for control cards
4 relay, 2 analog (current/voltage), 1 pulse (HTL, max 32 kHz), 24 Vdc for external sensors
Control outputs
available (max. 150 mA)
For connection of I/O functions without physical wiring
Virtual input/output
Multiple assignment of I/O functions for easier wiring
Programming interface Mini-USB on the front cover; digital operator with Bluetooth ®
Operator LCD with copy function for several parameter sets, real time clock, data logging
Specification overview
Motor Control
Motor types Induction Motor (IM), Permanent Magnet Motor (IPM/SPM), Synchronous Reluctance Motor (SynRM)
Control methods V/f and Vector control with/without encoder, EZVector
Speed control With and without speed encoder
Zero speed With and without speed encoder
Motor parameter tuning Automatic, rotating/static
Further Functions
Integrated PID controller with sleep function
Automatic load distribution for multiple axes (droop control)
Automatic main power loss ride through
Speed Search function for smooth start of coasting motors
Braking with over-magnetization for fast stop without braking resistors
Energy-saving function
Automatic restart after failure
Overvoltage suppression
Auto stand by mode selection for energy saving
Protection / Monitoring
Stall prevention, overload prevention, overtemperature prevention- and further protective
Protective functions
functions for the motor, the application and the inverter drive
Monitoring of main components (fans, IGBTs, capacitors, charging circuit) with alarm when
Self-monitoring
reaching a certain lifetime
Options Model code
CANopen SI-S3
CC-Link SI-C3
DeviceNet SI-N3
E t h erC AT SI-ES3
Ether net/IP SI-EN3
Communication M ECH ATR O LI N K -II SI-T3
M ECH ATR O LI N K -III SI-ET3
Modbus/TCP SI-EM3
PROFIBUS-DP SI-P3
PROFINET SI-EP3
Lonworks SI-W3
I n c re m e n t a l E n c o d e r ( L i n e D r i v e r ) PG-X3
Complimentary Encoder (HTL, Open-Collector) PG-B3
Motor feedback
Resolver Interface for TS2640N321E64 PG-RT3
Absolute Encoder: Endat 2.1/01,2.2/01, Endat 2.2/22 (Heidenhain) PG-F3
(0) 4 to AI-A3
Input/Output
Digital Input: 16 Digital inputs, +24 V, at 8 mA each, sink or source,
DI-A3
multi-function or frequency reference (16-bit binary or BCD)
DO-A3
Connection diagram
DC reactor
(option)
U X Braking resistor
Main (option)
Three-phase Switch Fuse 2 1 U/T1
R/L1 R/L1 - B1 B2 U/T1
power supply: V/T2
S/L2 S/L2 V/T2 M
200 to 240 VAC or W/T3
T/L3 T/L3 W/T3
380 to 480 VAC,
50/60 Hz
Drive
Ground
Forward Run / Stop S1 Option Card
Connector
Reverse Run / Stop S2 CN5-C
CN5-B
CN5-A
External fault S3
Fault reset S4
Multi-function Multi-speed step 1 S5
digital inputs
Multi-speed step 2 S6
Jog speed S7
External Baseblock S8
SN
SC
24 VDC Output SP
+24 VDC (150 mA)
MA Fault relay output
E (G)
MB 250 VAC, max. 1 A
Shield ground terminal
MC 30 VDC, max 1 A
Pulse Train RP Pulse Train Input (max 32 kHz)
Input V Power supply +10.5 VDC, max. 20 mA
M1
V Power supply, -10.5 VDC, max. 20 mA During Run
M2
Frequency
Reference A1
Multi-function 2 k: Multi-function
analog/pulse Relay Output
train inputs Frequency -10 to +10 VDC (20 k:)/ M3
Reference 0 to +10 VDC (20 k:) M4 Zero Speed
A2 250 VAC, max. 1 A
Bias 30 VDC, max 1 A
0 to 20 mA (250 :)/
4 to 20 mA (250 :)
Aux. Freq. Ref. M5
(PTC) A3 Speed Agree
M6
AC 0 V
HC
SN
control circuit terminal
main circuit terminal
Technical data
Model designation
GA70 D 4 004 A B A
Environmental Spec
Product Series A: Standard
GA700 Series Enclosure
Region Code B: IP20
D: India EMC filter option
A: Japan A: No built-in filter
Voltage Class B: C3 built-in
C: C2 built-in
Rated output current
See Ratings Table
Data
200 V Class
4 6 0 VA C >400
460V V
Class
AC Dimensions [ mm] Dimensions [ mm]
Catalog
plica- Rated Output Max Applica- Rated Output Max Applica- Rated Output Weight Weight
Code
or Current ble Motor Current ble H
Motor W Current D [kg] H W D [kg]
GA70D
D [kW] HD / ND [A] HD / ND [kW] HD / ND [A] HD / ND [kW] HD / ND [A]
0.75 1.8 4002
/ 2.1 0.55 / 0.75 1.6
1.8 / 2.1 0.55 / 0.75 1.6 / 2.1
1.5 3.4 4004
/ 4.1 0.75 / 1.5 3.4
2.1/ /4.1
3 0.75 / 1.5 2.1176
/3 3.5 176 3.5
2.2 4.8 4005
/ 5.4 1.5 / 2.2 4.8 / 4.8
3.4 5.4 1.5 / 2.2 3.4 / 4.8
3.0 5,5 4007
/ 7.1 2.2 / 3.0 5.5 / 6.9
4.8 7.1 2.2 / 3.0 4.8 / 6.9
260 140 260 140
4.0 7.2 4009
/ 8.9 3.0 / 4.0 6.9
7.2 / 7.6
8.9 3.0 / 4.0 6.9 / 7.6 3.9 3.9
5.5 9.2 /4012
11.9 3.7 / 5.5 7.6/ /11.9
9.2 11 3.7 / 5.5 7.6 211
/ 11 211
7.5 14.8 4018
/ 17.5 5.5 / 7.5 14.8 17.5
11 / 14 5.5 / 7.5 11 / 14
4.2 4.2
11 18 /4023
23.4 7.5 / 11 18
14/ /23.4
21 7.5 / 11 14 / 21
15 24 4031
/ 31 11 / 15 21
24 / 27
31 11 / 15 21 / 27
300 180 202 6.0
300 180 202 6.0
18.5 31 4038
/ 38 15 / 18.5 27
31 / 34
38 15 / 18.5 27 / 34
/ 22 39 4044
/ 44 18.5 / 22 39 / 40
34 44 18.5 / 22 34 /227
40 7.5 227 7.5
350 220 350 220
30 45 /4060
59.6 22 / 30 4450/ /5592.6 22 / 30 40 /24
562 13 246 13
37 60 /4075
74.9 30 / 37 60
52/ /74.9
65 400
30 / 37 240 52 / 65 16
400 240 16
45 75 /4089
89.2 37 / 45 75
65/ /89.2
77 37 / 45 65 /280
77 280
450 255 35
450 255 35
55 91 /4103
103 45 / 55 91
77 // 103
96 45 / 55 77 / 96
75 112 4140
/ 140 55 / 75 96 //124
112 140 55 / 75 96 / 124
543 264 335 543
40 264 335 40
90 150 4168
/ 168 75 / 90 124
150 / 156
168 75 / 90 124 / 156
110 180 4208
/ 208 90 / 110 156
180 / 180
208 90 / 110 156 / 180
132 216 4250
/ 250 110 / 150
132 180
216 / 240
250 700
110 / 150 312 180 /420
240 80
700 312 420 80
160 260 4296
/ 296 150
132 / 185
160 240
260 / 302
296 150 / 185 240 / 302
200 304 4371
/ 371 185
160 / 220
200 302
304 / 361
371 185 / 220 302 / 361
800 440 472 800
120 440 472 120
220 371 4389
/ 389 220
200 / 260
220 361
371 / 414
389 220 / 260 361 / 414
250 414 4453
/ 453 260
220 / 300
250 414 / 477
453 260 / 300 414 / 477
315 453 4568
/ 568 300
250 / 335
315 477
453 / 515
568 1140
300 / 335 510 477 /480
515 1140
175 510 480 175
355 605 4675
/ 675 370
315 / 450
355 590
605 / 720
675 370 / 450 590 / 720
YASKAWA India Pvt. Ltd.,
17/A, 2nd Main, Electronic city, Phase 1
Hosur Road, Bangalore 560 100.
E-mail: info@yaskawa.in
Phone: 080 4244 1900
Web: www.yaskawaindia.in
Data sheet 3RH2122-1AP00
KC
Functional
Safety/Safety of Declaration of Conformity Test Certificates Marine / Shipping
Machinery
Marine / Shipping
other
Confirmation
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RH2122-1AP00
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RH2122-1AP00
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RH2122-1AP00
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RH2122-1AP00&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RH2122-1AP00/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RH2122-1AP00&objecttype=14&gridview=view1
Model
product brand name SENTRON
product designation Miniature circuit breaker
General technical data
number of poles 1
design of pole 1P
tripping characteristic class C
mechanical service life (switching cycles) / typical 10 000
overvoltage category III
degree of pollution 2
Voltage
type of voltage / of the operating voltage AC
insulation voltage (Ui)
● with single-phase operation / at AC / rated value 250 V
● with multi-phase operation / at AC / rated value 440 V
Supply voltage
supply voltage / at AC / rated value 415 V
operating voltage
● with multi-phase operation / at AC / maximum 440 V
● at DC / rated value / maximum 72 V
Protection class
protection class IP IP20, with connected conductors
Switching capacity
switching capacity current
● acc. to EN 60898 / rated value 10 kA
energy limitation class 3
Dissipation
power loss [W] / for rated value of the current / at AC / in 0.86 W
hot operating state / per pole
Current
operational current
● at 30 °C / rated value 6A
● at AC / rated value 6A
suitability for operation Residential buildings/infrastructure
Product details
product component / neutral conductor switching No
product feature / touch protection Yes
product feature
● halogen-free Yes
Miscellaneous Miscellaneous
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/lowvoltage/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=5SL4106-7RC
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/5SL4106-7RC
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=5SL4106-7RC
CAx-Online-Generator
http://www.siemens.com/cax
Tender specifications
http://www.siemens.com/specifications
Model
product brand name SENTRON
product designation Miniature circuit breaker
General technical data
number of poles 2
design of pole 2P
tripping characteristic class C
mechanical service life (switching cycles) / typical 10 000
overvoltage category III
degree of pollution 2
Voltage
type of voltage / of the operating voltage AC
insulation voltage (Ui)
● with single-phase operation / at AC / rated value 250 V
● with multi-phase operation / at AC / rated value 440 V
Supply voltage
supply voltage / at AC / rated value 415 V
operating voltage
● with multi-phase operation / at AC / maximum 440 V
● at DC / rated value / maximum 72 V
Protection class
protection class IP IP20, with connected conductors
Switching capacity
switching capacity current
● acc. to EN 60898 / rated value 10 kA
energy limitation class 3
Dissipation
power loss [W] / for rated value of the current / at AC / in 0.86 W
hot operating state / per pole
Current
operational current
● at 30 °C / rated value 6A
● at AC / rated value 6A
suitability for operation Residential buildings/infrastructure
Product details
product component / neutral conductor switching No
product feature / touch protection Yes
product feature
● halogen-free Yes
Miscellaneous Miscellaneous
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/lowvoltage/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=5SL4206-7RC
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/5SL4206-7RC
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=5SL4206-7RC
CAx-Online-Generator
http://www.siemens.com/cax
Tender specifications
http://www.siemens.com/specifications
Model
product brand name SENTRON
product designation Miniature circuit breaker
General technical data
number of poles 4
design of pole 4P
tripping characteristic class C
mechanical service life (switching cycles) / typical 10 000
overvoltage category III
degree of pollution 2
Voltage
type of voltage / of the operating voltage AC
insulation voltage (Ui)
● with single-phase operation / at AC / rated value 250 V
● with multi-phase operation / at AC / rated value 440 V
Supply voltage
supply voltage / at AC / rated value 415 V
operating voltage
● with multi-phase operation / at AC / maximum 440 V
● at DC / rated value / maximum 72 V
Protection class
protection class IP IP20, with connected conductors
Switching capacity
switching capacity current
● acc. to EN 60898 / rated value 10 kA
energy limitation class 3
Dissipation
power loss [W] / for rated value of the current / at AC / in 2.17 W
hot operating state / per pole
Current
operational current
● at 30 °C / rated value 20 A
● at AC / rated value 20 A
suitability for operation Residential buildings/infrastructure
Product details
product component / neutral conductor switching No
product feature / touch protection Yes
product feature
● halogen-free Yes
Miscellaneous Miscellaneous
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.siemens.com/lowvoltage/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=5SL4420-7RC
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/5SL4420-7RC
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=5SL4420-7RC
CAx-Online-Generator
http://www.siemens.com/cax
Tender specifications
http://www.siemens.com/specifications
IP 54 | TYPE 12
nVent HOFFMAN | 1 / 4
EF
High flow filter fan
nVent HOFFMAN | 2 / 4
EF
High flow filter fan
24 V DC
Service
EF+EFA
Filter mat life L10 Bearing Noise Cut-out Weight Current Power
Air flow Filtration Fuse (A) Item no.
(EN779) (40ºC) type (dB) (mm) (kg) (A) (W)
(m³/h)
(h)
310 mm EF100-
19/24 12/14 G4 >90 70.000 Ball 33 92 × 92 0.25 0.10 2.40 6
cable 24R5
125 × 310 mm EF200-
61/67 44/50 G4 >90 62.500 Ball 44 0.45 0.21 5.00 6
125 cable 24R5
177 × 310 mm EF220-
98/108 73/80 G4 >90 62.500 Ball 40 0.70 0.21 5.00 6
177 cable 24R5
223 × Spring EF250-
125/138 93/102 G4 >90 70.000 Ball 40 1.40 0.20 4.70 6
223 type 24R5
223 × Spring EF300-
223/247 201/223 G4 >90 80.000 Ball 42 1.45 0.50 12.00 6
223 type 24R5
nVent HOFFMAN | 3 / 4
EF
High flow filter fan
nVent HOFFMAN | 4 / 4
Manufacturer assumes no responsibility for a hazard or
damage caused by incorrect or non-application of any of the
instructions attached herein. Under no circumstance shall 1.Features
Larsen & Toubro be liable for any consequential or resulting
injury or for loss, damage or expense directly or indirectly from · Accuracy class 1 as per IEC 62053-21, class 0.5, 0.5S as per IEC 62053-22
the use of this product. Sufficient care is taken to provide all · True RMS measurement
INSTRUCTION MANUAL information regarding the product but Larsen & Toubro does
not claim any responsibility for the damage caused by using the · Password protection provision
product directly or indirectly. Use according to the operating · Site selectable for 3 Phase 4 Wire, 3 Phase 3 Wire, 1 Phase
Digital Panel Meter instructions, professional practices, wiring rules, codes, safety
regulations applicable to the given installation. · Site programmable CT/PT ratio
Basic Multifunction Meter · Auto-scaling of kilo, mega & giga values
During normal operation of this instrument ,hazardous · Positive accumulation of active energy
4400 LED series voltages are present at the rear terminals, which can cause · Autoscrolling & freeze mode provision is available
injury or death. Installation ,disconnection or removal of the
meter should be carried out only by qualified, trained · User selectable energy measurement : Wh/VAh
personnel, after de-energizing connected circuits. Improper
installation , including improper grounding will void warranty.
Product warranty void if seal is broken.
Kilo
{Giga Voltage RY Phase Load Hour Class 1 as per
K
IEC 62053-21
Reverse
Communication Voltage YB Phase Power Factor R Phase/Y Phase/B Phase Measurement
REV DO
Class 0.5 as per
ON
Voltage BR Phase VA - R Phase/Y Phase/B Phase accuracy IEC 62053-22
Digital Output PRG
Pulse
MULTIFUNCTION METER A Average Current Voltage R / Y / B Phase Class 0.5S as per
IEC 62053-22
To select the value F Frequency Current R / Y / B Phase 4 digit for instantaneous
To edit the
or accept the value
Display type LED
value/Parameter & 6 digits for cumulative
in programming in programming UA Total VA Watts R / Y / B Phase & resolution
mode mode
6. Memory Map
Address Parameter Data type Address Parameter Data type Address Parameter Data type Address Parameter Data type
40101 Watts Total float 40123 PF B phase float 40137 VY B phase float 40151 Current R phase float
40103 Watts R phase float 40125 VA total float 40139 VB R phase float 40153 Current Y phase float
40105 Watts Y phase float 40127 VA R phase float 40141 VL N average float 40155 Current B phase float
40107 Watts B phase float 40129 VA Y phase float 40143 V R phase float 40157 Frequency float
40117 PF Avg (inst) float 40131 VA B phase float 40145 V Y phase float 40159 Wh float
40119 PF R phase float 40133 VL L average float 40147 V B phase float 40161 VAh float
40121 PF Y phase float 40135 VR Y phase float 40149 Current Total float 40217 Load Hours Unsigned long
WL44000501A
+2.0
90 - 0.0 Steps for Mounting
CUSTOMER INTERACTION CENTRE (CIC)
Insert meter to panel
Received (Import) Delivered (Export) Received (Import) Delivered (Export) Received (Import) Delivered (Export) 1 TOLL-Free: 1800 233 5858, 1800 200 5858
without clamps
Telephone : 022 6774 5858
2 2
Load Line Load Line Load Line 1 Insert both clamps email: cic@LNTEBG.com
3
+2.0
90 - 0.0
6. Memory Map
Address Parameter Data type Address Parameter Data type Address Parameter Data type Address Parameter Data type
40101 Watts Total float 40123 PF B phase float 40137 VY B phase float 40151 Current R phase float
40103 Watts R phase float 40125 VA total float 40139 VB R phase float 40153 Current Y phase float
40105 Watts Y phase float 40127 VA R phase float 40141 VL N average float 40155 Current B phase float
40107 Watts B phase float 40129 VA Y phase float 40143 V R phase float 40157 Frequency float
40117 PF Avg (inst) float 40131 VA B phase float 40145 V Y phase float 40159 Wh float
40119 PF R phase float 40133 VL L average float 40147 V B phase float 40161 VAh float
40121 PF Y phase float 40135 VR Y phase float 40149 Current Total float 40217 Load Hours Unsigned long
WC44000501A
+2.0 Steps for Mounting
90 - 0.0 CUSTOMER INTERACTION CENTRE (CIC)
Insert meter to panel
Received (Import) Delivered (Export) Received (Import) Delivered (Export) Received (Import) Delivered (Export) 1 TOLL-Free: 1800 233 5858, 1800 200 5858
without clamps
Telephone : 022 6774 5858
2 2
Load Line Load Line Load Line Insert both clamps email: cic@LNTEBG.com
1 3
+2.0
90 - 0.0
6. Memory Map
Address Parameter Data type Address Parameter Data type Address Parameter Data type Address Parameter Data type
40101 Watts Total float 40123 PF B phase float 40137 VYB phase float 40151 Current R phase float
40103 Watts R phase float 40125 VA total float 40139 VBR phase float 40153 Current Y phase float
40105 Watts Y phase float 40127 VA R phase float 40141 VLN average float 40155 Current B phase float
40107 Watts B phase float 40129 VA Y phase float 40143 V R phase float 40157 Frequency float
40117 PF Avg (inst) float 40131 VA B phase float 40145 V Y phase float 40159 Wh float
40119 PF R phase float 40133 VLL average float 40147 V B phase float 40161 VAh float
40121 PF Y phase float 40135 VRY phase float 40149 Current Total float 40217 Load Hours Unsigned long
WL44050506A
+2.0
90 - 0.0 Steps for Mounting
CUSTOMER INTERACTION CENTRE (CIC)
Insert meter to panel
Received (Import) Delivered (Export) Received (Import) Delivered (Export) Received (Import) Delivered (Export) 1 TOLL-Free: 1800 233 5858, 1800 200 5858
without clamps
Telephone : 022 6774 5858
2 2
Load Line Load Line Load Line 1 Insert both clamps email: cic@LNTEBG.com
3
+2.0
90 - 0.0
RELIABLE
MEASUREMENT
& PROTECTION
www.pragtielectricals.com
ABOUT US
Pragati Electricals Pvt. Ltd. an ISO 9001-2008 certified company has been manufacturing wide range of Instrument Transformers
from 0.66 kV to 220 kV over last 35 years. Thousands of Instrument Transformers of our make are in service in various
applications like Power Generation, Transmission & Distribution Networks, Metering & Protection Circuits, Switchboards,
Metering Cubicles etc.
‘Pragati’ make Instrument Transformers are well-known for reliable measurement accuracy due to which in some laboratories
Pragati make CT’s & PT’s are even used as standards for calibration purpose.
‘Pragati’ has Three manufacturing plants with state-of-the-art design, production & testing facilities located at Thane, Rabale,
Murbad in the Thane, Navi Mumbai & Kalyan region of Maharashtra State of India.
INFRASTRUCTURE
Testing & Quality Control : Our test laboratories are equipped to perform
acceptance tests of raw materials to finished product as per National &
International Standards. Latest equipments for automatic testing &
calibration of CTs, measurement of Partial Discharge & Dielectric Loss Factor
are used in our laboratories.
LOW TENSION INSTRUMENT TRANSFORMERS
‘Pragati’ manufactures all types of Indoor / Outdoor low tension current & voltage transformers
* We make wide range of Low Voltage Control Transformers with & without enclosure for various applications.
INDOOR EPOXY RESIN CAST INSTRUMENT TRANSFORMERS
‘Pragati’ offers indoor type Instrument Transformers in Epoxy Resin Cast up to 33 kV . Modern manufacturing process such as
Automatic Pressure Gelation method is used. All processes during casting are monitored by PLC, which gives excellent quality
product.
* We also make Resin Cast H.T. Control Transformars for Indoor & Outdoor applications.
OUTDOOR OIL COOLED INSTRUMENT TRANSFORMERS
‘Pragati’ offers Outdoor Oil Cooled type current transformers up to 220 kV in Dead Tank version, up to 132 kV both in Live Tank
& Dead Tank versions & voltage transformers up to 132 kV.
High quality oil paper insulation is achieved by using oil paper impregnation at controlled vacuum & temperature treatment.
Inside system is sealed from atmosphere .
Contraction & expansion of oil with temperature variation is taken care by stainless steel bellow / nitrogen cushioning.
Outer insulation consist of high quality porcelain insulators having standard /extended creepage distance . On request composite
insulator consisting fiber glass reinforced pipe & silicon rubber screens can be provided instead of porcelain insulator.
Main Features
Fully Type Tested as per IS, IEC at NABL Accredited Laboratories. Design passes Seismic withstand capability test at 0.5 g peak.
With the growing awareness of accurate metering of energy & wide sprade activities undertaken by Electric Energy Supply
companies the need has been felt for good quality reliable Metering Unit / Cubicles / Kiosk up to 33 kV.
• Up to 33 kV Features
• Indoor or Outdoor 1. Pilfer Resistant design .
• 1.2/50 µs LIV up to 170 kVp 2. Outdoor Type Metering Cubicle is completely
• Ref. Standard IS, IEC (other standard on request) Weather & Dust Proof.
• CT Specification 3. Very High Export Quality Resin Cast Instrument
Ip up to 300 A Transformers of our own make used inside cubicles.
Is = 5 or 1 A 4. No Exposure of Live Parts.
Burden 5 ~ 20 VA 5. Available for 3 Ph-3 Wires / 3 Ph-4 Wires Measuring
Ith Up to 26.2 kA Systems.
Accuracy Class 0.2 / 0.5 6. Electronic Lock Arrangement (on request).
(0.2 S / 0.5 S on special request) 7. Type tested at NABL accredited laboratory.
• VT Specification
Burden up to 100 VA / Phase
Advantages
Accuracy Class 0.2 / 0.5
1. Excellent Quality.
V.F. up to 1.5 for 30 sec
2. Fastest Delivery due to our own CTs / PTs &
Insulators etc.
3. Excellent After sales service.
4. Our own testing & calibration facility.
1400
CT/VT CHAMBER
METER CHAMBER
CT/VT CHAMBER
1900
Danger Board
Rating Plate
1350
1400 1430
Incoming Outgoing
Cable Entry Cable Entry 1520
FRONT VIEW
FRONT VIEW
Incoming Outgoing
“E”
1100±5
2150
FRONT VIEW
Incoming Outgoing
Cable Entry Cable Entry
*We also make Outdoor Oil Cooled Combined CT/PT Metering Sets for 3 Phase 3 Wires or 3 Phase 4 Wires applications.
OUTDOOR CYCLOALIPHATIC RESIN CAST INSTRUMENT TRANSFORMERS
‘Pragati’ manufactures Outdoor Cycloaliphatic Instrument Transformers up to 33 kV. Following are advantages & features.
Features
1. Compact Design
2. Weather & UV Resistant Insulation
3. Type tested at NABL accredited laboratory
Advantages
1. Maintenance free
2. Minimal risk of transit damage
3. Competitive price
4. Low lead time
5. High Mechanical strength
SPECIALITY TRANSFORMERS
3SB5
Indicating lamps and push buttons
www.siemens.co.in
Index
Device Types Pg 03
Pg 04
Overview Pg 05
Pg 06
Pg 13
Pg 15
Pg 19
2
Device Types
Push Button
Twin Pushbuttons
3
Contact Reliability SIGUT® Termination Snap Mounting
4
Overview
Design
Standards
Connection Method
5
Pushbutton
6
Key Switches
3SB50 00-4AA01
3SB50 00-4AB01
3SB50 00-4TA01
3SB50 00-4TC01
3SB50 00-4HC01
3SB50 00-4HB01
3SB50 00-4JA01
7
Twin Push button
3SB54 00-0C
3SB54 00-0E
3SB54 00-0F
Contact Blocks
8
Compact LED indicating lamp
Indicators
9
Illumination module with integrated LED
Red 3SB54 00-7CC
3SB54 00-7CE
3SB54 00-7CL
3SB54 00-7CF
3SB54 00-7CG*
3SB54 00-7CD
Red 3SB54 00-7EC
3SB54 00-7EE
3SB54 00-7EL
3SB54 00-7EF
3SB54 00-7EG*
3SB54 00-7ED
@
Red 3SB54 00-7DC
3SB54 00-7DE
3SB54 00-7DL
3SB54 00-7DF
3SB54 00-7DG*
3SB54 00-7DD
Red 3SB54 00-7TC
3SB54 00-7TE
3SB54 00-7TL
3SB54 00-7TF
3SB54 00-7TG*
3SB54 00-7TD
@
Red 3SB54 00-7HC
3SB54 00-7HE
3SB54 00-7HL
3SB54 00-7HF
3SB54 00-7HG*
3SB54 00-7HD
Illumination module with BA9s LED
Red 3SB54 00-8CC
3SB54 00-8CE
3SB54 00-8CF
3SB54 00-8CD
#
Red 3SB54 00-8FC
3SB54 00-8FE
3SB54 00-8FF
3SB54 00-8FD
#
Red 3SB54 00-8SC
3SB54 00-8SE
3SB54 00-8SF
3SB54 00-8SD
3SB54 00-6CC
3SB54 00-6FH
3SB54 00-6LH
10
Accessories and spare parts
Lamps
3SB59 02-6C
3SB59 02-6D
11
Holders for commanding and signalling elements
3SB59 12-0BA
3SB59 11-1AA
Inscription labels
3SB59 21-0AD
3SB59 21-0AB
Inscription plates
3SB59 01-2EL
3SB59 01-2EK
3SB59 01-2EB
3SB59 01-2EC
3SB59 01-2ED
3SB59 01-2EE
3SB59 01-2EF
3SB59 01-2ES
3SB59 01-2ER
Reverse 3SB59 01-2EG
3SB59 01-2AA
Trip 3SB59 01-2EA
Other accessories
3SB59 21-0AE
3SB59 11-1BA
3SB59 02-0AA
3SB59 12-0AN
3SB59 12-0BC
12
Holders Contact and lampholders
13
Pushbuttons and indicating lamps
Rated insulation voltage Ui
Switching frequency
Voltage limits
Degree of protection IP65
IP65
IP65
IP65
IP54
IP65
1
1 1 1
1 1 1
3 3
3 3
Key 3 3
3 3
14
Overview
Enclosures
Standards
15
Metal enclosures
1 3SB58 01-8AA3
1 3SB58 01-8AN3
1 3SB58 01-8AM3
3SB58 02-8AC3
3SB58 02-0AE3
3 3SB58 03-8AH3
Plastic enclosures
1 3SB58 01-7AA3
1 3SB58 01-7AN3
1 3SB58 01-7AM3
3SB58 02-7AC3
3SB58 02-7AE3
3 3SB58 04-7AG3
16
Pendant mounting: Metal
3SB58 22-8AC3
3 3SB58 23-8AH3
3SB5822-7AC3
3 3SB5823-7AH3
Empty enclosures
17
Lampholders and contact blocks
Screw terminals
BA9s lampholder
BA 9s lampholders
3SB54 20-2PF0
3SB54 20-2PL0
3SB54 20-0C
Accessories
Set of 11 labels 3SB59 01-3EA
3SB59 02-2BX
18
Project planning aids
19
20
1
3 150
4*
6*
21
22
23
Your partners
Ahmedabad Chennai Jaipur Mumbai
Nagpur
Baroda Coimbatore Jamshedpur
Kolkata
Gurgaon Pune
Bengaluru
Lucknow
Bhubaneswar Hyderabad Vishakhapatnam
Chandigarh
Territory managers:
Agra Haridwar Maraimalainagar Renukoot
Belgavi
Mehsana
Hosur Rudrapur
Mysore
Hubli
Salem
Bharuch
Naidupeta
Jalandhar
Siliguri
Bhilai
Jodhpur
Nashik
Sonepat
Bhopal
Kanpur
Neemrana
Sriperumbudur
Khopoli
Boisar
Patna Surat
Cochin
Kolhapur
Pondicherry Trichy
Kota
Durgapur
Trissur
Raipur
Ludhiana
Gandhidham
Udaipur
Rajkot
Ludhiana
Gorakhpur
Vapi
Ranchi
Madurai
Guwahati
Vijayawada
www.siemens.co.in
Catalogue Cum Technical Specification
Power Saver LT Current Transformers & Bus Bar Supports.
CURRENT TRANSFORMERS
PS Class CTs are designed for specific applications as per their knee point voltage,
max, exciting current, Turn Ratio so, use of general protection CT may cause
malfunctioning of relays Ipri.
CURRENT TRANSFORMERS
1 50 Ring 20
2 60 Ring 20
3 75 Ring 20
4 100 Ring 30
5 150 Ring 30
6 200 Ring 35
7 250 Ring 45
8 300 Ring 55
9 400 Ring 55
10 500 Ring 55
11 600 Ring 55
12 800 Ring 70
13 800 Rectangular 105*25
14 1000 Rectangular 105*25
15 1200 Rectangular 105*40
16 1500 Rectangular 105*40
17 1600 Rectangular 105*40
18 2000 Rectangular 155*50
19 2500 Rectangular 155*50
20 3000 Rectangular 155*80
21 3200 Rectangular 155*80
22 4000 Rectangular 155*80
23 5000 Rectangular 230*80
24 6000 Rectangular 230*80
Remarks:-Up to 80A Tape wound CT Accuracy class shall be 5.0.
Note:- Please consider the cost of Ct’s with Sec. /1A as (above LP+15%)
CT'S ARE ALSO AVAILABLE IN ANY OTHER ID & ACCURACY CLASS AS PER CUSTOMER SPECIFICATION.
CURRENT TRANSFORMERS
ABS ENCAPSULATED
Salient Features
ABS case housing having working temp. 130 °C
DIN Rail mounting provision in WPL CTs hence easy mounting, saving of man power & time.
Provision for mounting clamp and screw to hold BPL CT with busbar
Sealing Provision in BPL CTs for protection against temper
Light weight , better finish & dimensional stability
Stud type brass terminals for firm connections
WOUND PRIMARY (WPL) LTCTs
Primary Current Primary Brass
S. No. A B C D Stud. Size
(AMP)
1 2.5-25 70 55 100 80 M8
2 30-80 70 55 100 80 M8
3 100 70 55 100 80 M 10
25 25
50 50
100 100
150
200
250
300
400 Potential Transformer Three Phase Star/Star
500
VA Rating
750
1000 25
1250 50
1500 100
2000
2500
5000
BUSBAR SUPPORTS & INSULATORS
MOULDED SUPPORTS
Salient Features
Better Fault Level in comparison with SMC. Extra durability.
Faster assembly, Hence time saving. Push Fit type fitment.
Better Strength due to more gripping area. Compact & Unique design.
Inventory management is easier. Better Class of Flammibility.
Lighter in weight due to less specific Gravity. Hardware & Manpower saving.
Values
Properties Units
SMC Moulded
**
Short Circuit KA 65 80
Dielectric Strength KV/mm 11 26
Flammability Self extingushing FV0
Dimensions
Bus Bar Product Code (in mm) Std. Qty
A B C D E F per box
Dimensions
Bus Bar Product Code (in mm) Std. Qty
per box
A B C D N Z Y Y1
10mm x 4run MAMS-FP-365X10 10.7 365 335 40 10.7 73 73 73 36
10mm x 4run MAMS-FP-415X10 10.7 415 385 40 10.7 80 87.5 87.5 36
12mm x 4run MAMS-FP-365X12 12.7 365 335 40 12.7 73 73 73 36
12mm x 4run MAMS-FP-415X12 12.7 415 385 40 12.7 80 87.5 87.5 36
6mm x 4run MAMS-FP-365X6 6.7 365 335 40 6.7 73 73 73 36
6mm x 4run MAMS-FP-415X6 6.7 415 385 40 6.7 80 87.5 87.5 36
10mm x 3run* MAMS-TPN-365X10 10.7 365 335 40 6.7 73 73 73 36
10mm x 3run* MAMS-TPN-415X10 10.7 415 385 40 6.7 80 87.5 87.5 36
12mm x 3run* MAMS-TPN-365X12 12.7 365 335 40 6.7 73 73 73 36
12mm x 3run* MAMS-TPN-415X12 12.7 415 385 40 6.7 80 87.5 87.5 36
* With 6mm x 1run for Neutral
BUSBAR SUPPORTS & INSULATORS
Conical Insulators
L-Support
Standard
Height (H) mm Product code Qty.
Per Box
60 ML 60 160
85 ML 85 125
100 ML 100 100
125 ML 125 80
Finger Supports
Dimension Standard
Product
Busbar Qty.
code
A B C D E F Per Box
Dimension Standard
Product
Busbar Qty.
code
A B C D E F Per Box
Dimension Standard
Product
Busbar Qty.
code
A B C D E F Per Box
Dimension Standard
Product
Busbar Qty.
code
A B C D E F Per Box
Dimension Standard
Product
Busbar Qty.
code
A B C D E F Per Box
All Dimensions are in mm Slot Depth for busbar is 15mm Mounting Hole Dia is 8.5 mm
BUSBAR SUPPORTS & INSULATORS
6mmx1run/ph & 6mmx1run -N MTPN 107/30 7.2 300 280 50 7.2 65 52.5 52.5 26
10mmx1run/ph & 6mmx1run -N MTPN 111/30 11.5 300 280 50 7.2 65 52.5 52.5 26
12mmx1run/ph & 6mmx1run -N MTPN 114/30 13.7 300 280 50 7.2 65 52.5 52.5 26
6mmx1run/ph & 6mmx1run -N MTPN 107/35 7.2 350 328 50 7.2 75 62.5 62.5 16
10mmx1run/ph & 6mmx1run -N MTPN 111/35 11.5 350 328 50 7.2 75 62.5 62.5 16
12mmx1run/ph & 6mmx1run -N MTPN 114/35 13.7 350 328 50 7.2 75 62.5 62.5 16
6mmx1run/ph & 6mmx1run -N MTPN 107/42 7.2 420 396 60 7.2 100 52.5 62.5 16
10mmx1run/ph & 6mmx1run -N MTPN 111/42 11.5 420 396 60 7.2 100 52.5 62.5 16
12mmx1run/ph & 6mmx1run -N MTPN 114/42 13.7 420 396 60 7.2 100 52.5 62.5 16
MTPN-50 MTPN 50 - - - - - - - - 12
General Terms :
All prices are ex-factory.
Prices are inclusive of prevailing excise duty.
Any other Duties & Sale Tax will be charged extra as per applicable.
Prices are subject to revision without notice.
All disputes are subject to Haryana Jurisdiction
Approvals
General Data
Type KUT 2.5
Screw Size M3
Thickness (mm) 6
Other Color Variants Black, Blue, Green, Grey, Khakhi, Red, Yellow
Ratings - IEC
Standard IEC 60947-7-1
Ratings-ATEX
Certificate No 400
Ratings-CSA
Rated Voltage (V) 600
Ratings-uL
Rated Voltage (V) 600
Accessories
End Plate
KPNS
Height : 31 mm
Width : 36.50 mm
Thickness : 1.50 mm
KBM
Height : 37.50 mm
Width : 50.50 mm
Thickness : 1.50 mm
KBXF
Height : 53.4 mm
Width : 54 mm
Thickness : 1.5 mm
Protection Cover
PCK3
Height : 28 mm
Width : 58.35 mm
Thickness : 1 mm
End Clamp
Height : 33 mm
Width : 43.50 mm
Thickness : 6 mm
Height : 33 mm
Width : 43.50 mm
Thickness : 10 mm
Height : 35.50 mm
Width : 50.60 mm
Thickness : 8 mm
SCUDD
Height : 50 mm
Width : 55.50 mm
Thickness : 10 mm
SCUN (Universal Rail Mounted)
Height : 35.50 mm
Width : 50.60 mm
Thickness : 9.50 mm
SCUSL
Height : 41 mm
Width : 47.50 mm
Thickness : 8 mm
CCLK2.5
SLC4N
Marking Label
LABEL KN5.5
Group Marking Carrier
DCKNMLH
Height : 45.50 mm
Width : 43.50 mm
Thickness : 6 mm
SCKNMLH
Height : 45.50 mm
Width : 48 mm
Thickness : 8 mm
SCUNMLH
Height : 53.50 mm
Width : 50.60 mm
Thickness : 8 mm
Mounting Channel (Standard Lengths 300 mm, 500 mm, 1000 mm)
CHK
Height : 7.5 mm
Width : 35 mm
Thickness : 1 mm
CHKD
Height : 15 mm
Width : 35 mm
Thickness : 1.50 mm
CHKDS (Perforated)
Height : 15 mm
Width : 35 mm
Thickness : 1.50 mm
CHKS (Perforated)
Height : 7.5 mm
Width : 35 mm
Thickness : 1 mm
CHS
Height : 15 mm
Width : 32 mm
Thickness : 1.50 mm
UHDD
Height : 74.50 mm
Width : 55.82 mm
Thickness : 1.50 mm
GMH 10
Height : 51 mm
Width : 41.50 mm
Thickness : 10 mm
GMH 20
Height : 51 mm
Width : 41.50 mm
Thickness : 20 mm
Window Partitions
SB1
Height : 16 mm
Width : 15.5 mm
Thickness : 0.6 mm
Note : Note : Technical specifications may change in line with technical advances and industry
standards
Note : Terminal block suitability for 1000 V rating is declared on basis of conducting dielectric
withstand voltage test as per standard IEC 60947-7-1 & IEC 60947-1.Test report can be provided
against request.