You are on page 1of 2

1)1.

lion has a mass of 105 kg and is chasing a zebra at the speed of


5m/s. She speeds up to 10 m/s to reach her prey faster. during
that time she travels 40m.How long did it take for the lion get to
top speed

1)2. lion has a mass of 105 kg and is chasing a zebra at the speed of
5m/s.She speeds up to 10 m/s to reach her prey faster. during
that time she travels 40m.calculate lion's power

2)1. 0.5kg ball is dropped from 2m height into a pit. The ball moves
along the track and hits a sprang located 0.5m above ground at the
other end. Stiffness is 5.What type of energy transformation is
happening between points

2)2. 0.5kg ball is dropped from 2m height into a pit.The ball moves
along the track and hits a sprong lovated 0.5m above ground at the
other end.Stiffness is 5.What will be the speed of the ball at the
bottom of the pit

2)3. 0.5kg ball is dropped from 2m height into a pit.The ball moves
along the track and hits a sprong lovated 0.5m above ground at the
other end. Stiffness is 5 How much will the spring A compress once
the ball reaches it.

3)1. 50 kg car is pushed by a 400N of force for 1.5 meters between A


and B.Moving cart them climbs up a ramp that is 1 meter high.You may
assume the track is frictionless until point C.How much work is done
on the cart
3)2. 50 kg car is pushed by a 400N of force for 1.5 meters between A
and B.Moving cart them climbs up a ramp that is 1 meter high.You may
assume the track is frictionless until point C.What will be the cart's
speed after point B

3)3. 50 kg car is pushed by a 400N of force for 1.5 meters between A


and B.Moving cart them climbs up a ramp that is 1 meter high. You
may assume the track is frictionless until point C.What will be the
cart's speed after it climbs the ramp right before point C

3)4. 50 kg car is pushed by a 400N of force for 1.5 meters between A


and B. Moving cart them climbs up a ramp that is 1 meter high. You
may assume the track is frictionless until point C. How long will the
cart travel before stopping after passing point C The friction force
between track and cart is 30N after point C

You might also like