Professional Documents
Culture Documents
Version 1.0
The printed circuit board (PCB) is built in high quality fiberglass, double sided and with a
solder mask that makes very easy installing components on it.
It’s designed to be directly connected to SimIO interface cards without interfering with
inputs and outputs from other panels.
outputs:
The following diagram shows part of the block diagram for the whole A320 front section
(you can find the complete diagram at Annex 1). The text on each IDC connector on the boards
indicates where to connect it on the control boards. For example, pilot is connected to connector
I1 for inputs, first and second bank on O3 for outputs and connector J3 on card D1 for displays.
Front side:
Back side:
Inputs:
Outputs:
Displays:
The printed circuit board (PCB) is built in high quality fiberglass, double sided and with a
solder mask that makes very easy installing components on it.
It’s designed to be directly connected to SimIO interface cards without interfering with
inputs and outputs from other panels.
outputs:
The following diagram shows part of the block diagram for the whole A320 front section
(you can find the complete diagram at Annex 1). The text on each IDC connector on the FCU
board indicates where to connect it on the control boards. For example, board is connected to
connector I4 for inputs, first and second bank on O4 for outputs, connector J4 and J6 on card D1
for displays, and so on.
Front side:
Back side:
Inputs:
Outputs:
Displays: