Professional Documents
Culture Documents
Spring Return 8 Nm
A N A M E W I T H Q U A L I T Y 2 Point Control
Product Features
■ Torque 8 Nm
■ Control 2 Point
■ 2 auxiliary switches (SPDT)
■ Shaft dimensions
Ø 8 to 21 mm round / 6 to 15 mm square
■ Minimum shaft length 80 mm
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com
Rotary Damper Actuator C
Spring Return 8 Nm
A N A M E W I T H Q U A L I T Y 2 Point Control
Technical Specifications
NAFA 1…(S) NAFA 2…(S)
Torque M 8 Nm 8 Nm
8 Nm 8 Nm
Damper Size 1.5 m 2
1.5 m2
Shaft dimensions Ø 8 to 21 mm round / 6 to 15 mm square Ø 8 to 21 mm round / 6 to 15 mm square
Power Supply AC/DC 24 V ± 10% AC 230 V ± 10%
Frequency 50 - 60 Hz 50 - 60 Hz
Control Signal 2 point 2 point
Power Consumption
- Operating 7.0 W 8.0 W
- End Position 2.0 W 5.5 W
For Wire Sizing 8.0 VA 8.0 VA
Auxiliary Switch Rating 3 (1.5) A, AC 250 V 3 (1.5) A, AC 250 V
Protection Class III III II
Angle of Rotation -5°…90° (mechanical) -5°…90° (mechanical)
Angle of Limiting mechanical end stops mechanical end stops
Weight 2.2 Kg 2.3 Kg
Life Cycle 60’000 rotation 60’000 rotation
Sound Level 45 dB (A) 45 dB (A)
IP Protection IP 54 (dust protected & protected against splash water) IP 54 (dust protected & protected against splash water)
Operating Temperature -20°…+50° C / IEC 721-3-3 -20°…+50° C / IEC 721-3-3
2/4
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com
Rotary Damper Actuator C
Spring Return 8 Nm
A N A M E W I T H Q U A L I T Y 2 Point Control
AC 24 V ±10%
DC 24 V ±10%
N L1 AC 230 V ±10%
2 Point
M Switch a factory-set at 5º
a=5° b Not adjustable! 0º...90º
45º
Switch b factory-set at 85º 30º 60º
Adjustable between S5
yellow green blue purple grey white 40º…90º S4
15º 75º
S1 S2 S3 S4 S5 S6
S6
The Position of switches can 90º
be manually changed to any S5
required position by moving S4
3 (1.5) A, AC 250 V the micro switch on the
Actuator at 0º position actuator’s housing. S6
M M
black red 24V black red
NAFA…(S) actuators are capable of operating in parallel.
blue brown 230V blue brown
1 2 1 2 Parallel connection of several actuators is possible.
The Power consumption must be observed.
max.
3/4
AC 24 V ±10%
DC 24 V ±10%
N L1 AC 230 V ±10%
D-270A.E-205/CW41-09
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com
Rotary Damper Actuator C
Spring Return 8 Nm
A N A M E W I T H Q U A L I T Y 2 Point Control
Limiting Angle of Rotation NAFA 1/2…(S) Specified Safety Requirements NAFA 1/2…(S)
-5º...90º
Important Remark
Consult NENUTEC representatives for specific requirements and material selections for your intended application.
This actuator includes electrical and electronic components and may not be disposed as household garbage. Please consider the local valid legislation.
TELIMA AG
4/4
F: +41 55 224 40 69
E-Mail: info@telima.ch
Internet: www.nenutec.com
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com