Professional Documents
Culture Documents
Denon DVD-M330 Operating Instructions - Manualzz
Denon DVD-M330 Operating Instructions - Manualzz
Press this button atter selecting” PTY” withthe RDS button RANDOM © Random play onlatt to select one of the 29 program types. REPEAT Repeat play seting CT: Use this to display the time of the clock on the AVR:M30, PROG/DIRECT : Programidirect play Press this button when the timo sorvieo of an RDS station selection is being propatly received. "TIME" is displayed for 4 CALL; Program cal seconds. "NO TIME DATA" is displayed if the RDS station 0=9,+10 ; Number buttons oes not oer & time service and when the brosdeast isnt DVD SETUP | DVD setup mode orvoft being received propery. ALY. -4> Cursor updown ieftright RT: Press this button when receiving RDS stations to elect the ENTER: Enter sorting froquoncy, PS (or Station name), PTY or RT display TOP MENU | Top mony call Note that this bution will not function if the reception is MENU: Menu call poor DISPLAY | Display cali/selection The display mode changes as fellows each time the button RETURN. © Menu retum is pressed SUBTITLE = Subtitle language selection ‘AUDIO: Audio language selection PS» aT es py ‘ANGLE — © Anglo solocton eaieney «= d ied From TheatreSysten fanual.com Manuals7} REMOTE CONTROL UNIT + The included remote control unit /RC-996) can bs used to operate not only this unit but other remote control compatible DENON components 25 well. In addtion, the memory contains the cantsol signals for other remote contral units, soit can be used to operate ror-DENON remote control compatible products. 1D Remove the remote contil units rear cover Notes on Batteries ‘+ Use REP/AM batteries in the remote control unit ‘The batteries should be replaced with new ones enproxmately ‘nce a year, though this depends on the frequency of usage ‘+ Evon if loss than a yoar has passed, roplace tho battoros with now cones if the sat dos not operate even when the remote contol unit is operated nearby the set. (The included battery is only for verifying operation. Replace it with # new bsttery as soon as possible) ‘© When inserting the batteries, be sure to do so in the proper direction, following the “©” and “o" marks in tho batiory ® Set tree REPIAA batteries in the battery compartment in the» To prevent damage or leakage of battery fli indicated direction. = Donat use a new battery together with an old one, = Donat use two clferent types of batten * Domnot shortest, disassemble, heat or dispose of batteries in ‘ames. ‘+ Romove the batterios from the remote control unit when you do not plan to use it for an extended period of time + IF the battery fuid should leak, carefully wipe the fluid off of the battery compartment and insert new batteries ‘+ When replacing the batteries. have the new batteries ready and insert them as quickiy 2s possible. inside Eh k aad * Point tho remote contral unit at the remote sensor on tho main unit as shown on the diagram 4 The remote contra unt can be used from a straight distance of approximately 7 metersi22 teet from the main unit, but ths stance willbe shorter if there are obstactes inthe way or ifthe remote control unit is not pointed directly atthe remote sensor + The remote contol unit can be operated st ahorizontal ange of up 0 20 degrees with respect to the remote sensor. NOTES: may be cticut to operate the remote control unit it tne remote or fs exposed to direct sunight or song artificial oht. Do not press buttons on the main unit and remote contol unit Simultaneously. Doing se may result in malfunction ‘+ Neon signs er other devices emitting pulsetype noise nearby may result in malfunction, so keep the set as far away from such devices as possible Downloaded From TheatreSystem-Manual.com Manuals 49+ Tho includod remota control unit C996) can be usod to oporate not only the DHTMSG0DY but eso and to oparate cther remate control’ compatible DENON products. In. addition, the remote Control operation codes of other major brands of TVs and video | decks ate alsa stored in the remote contol un, sa the unit can be Used to operate these TVs and video decks 29 well em sheen eee * Tur on the power of all tho components lsforo operating thorn. Depending on the medal and year of make of Your component, some of the keys may not work. Setmads sich oD" pat Vo itacien —oD ao 7 Sot mode switch 2 to the position for the component 10 bo ‘operated IMD or TAPED. {Blue print) om a wT ~~ ‘Operate the audio component, «For deta, reer to the component's operating instructions. 3 Operation may not be possible for some models Dowiggaded From TheatreSysten ual.com Manual 11 MD recordar yet buttons Be Ged strode seh st 10-0") TIME Disc tine daplay TTL: Nome deol MUCTIREC | Reconing EDIT: Eat mode selection CCHARAC —: Selcton of earactere when inputing names ENTER: Entering of ected voles DSRS: CD aynchrenaed recording CLEAR Program dling RANDOM | Renan ley oe REPEAT = Repoa ly soting PROGDIRECT - Pog/aniect payback sotoction CALL Program cal 1-10, +10: Tack numborecloeton feat = Auto seach easing) SLME | Mania search lasteverse and lastHorwardh Pum: Poy HS Pane == Si (2) Tape deck system button (cpersted with mode switch 2 set to “TAPE") REC: Recording DSHS: CD oynchrenaod rosordng Ere Femint ant stlonsnd >: Forward drecton ay SATAPE = Roveoe deccion sey = StCie hot ted + Components of other brands can be operated with the included remote control unit by storing their codes in the preset memory. Note that depending on the model some operations may not be s 10 propotly set upon shicment from the factory. 1 mode switch 1t0 the “DVD position a a “<—* 2 moss nmian2 me IVER” poem ee oP ao Press the power ON button andthe OFF button simultaneously The transmission LED (indieste) flashes. Downloaded From TheatreSystem-Manual.com Manuals Bross the TV btn to poset aV the VCR bution preset Sa Rem np the tg rumberenresponding so thotrand of te component nose syn arto be sen the prest memony tet to te fables of tmote conta cox on pages 221025) Sue © a @ A NOTES: + When buttons are pressed while setting the preset memory, ‘their signals are sent ftom the remote control transmitter, 80 cover tho remote contol sonsor when setting the press memory to prevent accidental operation + Depending on he model and year of make, some ofthe remote contol coves forthe brands ncaded onthe tables may not cperse poner + Fer some brands there are multiple types of remote contrl ces. an oporaton does not work. ty changing to one of tho cther codes. 21os | ‘Advontura 016, 027, 046 Anam (06, 007, 036 ‘aoc ‘003, 007, 033, 028, 029, 047, 048, O49, 132 (003, 030, 031,032, 038, 047,049, 050, 122 086 ‘otizen (029, 080, 021,022, 094, 028,047, 049,080, 054, 061,095, 122, 123 Golortyme 003,047, 049, 135 Cony (061,052, 061 Grown 29 Daewoo 027,023, 029, 048, 049, 054, O86, 106,107, 137 Dimnensia Eorson (029, 051, 059, 060, 61, 062, 118, 123, 124, 130, 148 Futsu 0a, Futuretech 004 Goldstar (015,029, 031, 039, 048, 051,056, 057, 067, (068,069,116, 165 itso (029, 031, 051, 052, 070, 111, 112, 13, 124, 134 Infinity ov.ort ov.ort Kawasho 018, 046 oss 0, ox2 ESE Kv ova, 22 stow on ‘Logik 144 De ba 008, O14, 017,624, O10, 04,069,078, 075, 076, 7,116,125 Matsui oa ‘60, 161,102, 163, 168 Mite 125 (001, 016, 039,048, 056,057, 058,065, 081, 082, 083, 105 121,147 aD 08,075, 076, 1283 | 8 E 8 Opaimus 004, 139 (005, 010, 030, 050, 051, 056, 079, 085,127, 121, 190, 145, 147 Pionser a4, 198, 142 Price Chub Proton (005, 051, 092, 129 Oust (006, 037, 074,141 (040, 044, 125, 120, 197,151, 162 Saisto wr Sansui a g g | a Shap 011,012, 013, 026, 083, 098, 100, 104,121 ‘Signature 04, 144 § (043,046, 138,148, 190, I 007, 033 ‘SupteMacy 032, 122 ‘Syivania 008, 010, 017,030, 078, 073, 086, 89, 101,127, 131, 132,145, 185, Tandy 012, 121 Technics ox Tera 035, 129 Univers (020, 066, 088 Video Concepts 016 Wards (005, 085, 056,078, 085, 088, 069, 092, 102, 103, 131, 192,148 oor Downloaded From TheatreS ystem-Manual.com Manuals ny 3VCR E (026, 27, 070, 072, 082, 083, 084 i 5 g i g i : i (006, 087, 088,089, 050 i (025, 085, 056, O71 Craig 007,087, 088,091, 115, Dayton 025, 058 Elsctichome 001, 088, 007 i ‘001, 009, 017,027, 086, 088, 089, 092, 092,097, 100, 101, 102, 103, 104, 117 3 g ci (007, 011, 049, 050, 051, , 080, ‘06, 012, 082, 088, 129 Gaundig 82 Ho 081 i JC Renny 00, 005,007, 023, 078, 049,062, 05,087, 068 | Ds we (004, 005, 096, €25, 029, 043, 044, 045, 046, 085 Maghin 07 009,032, 049,052, 060, 081,087, 088, 097, 094, 5 Mica 001,017, 027, 041, 097 Mite on (001, 002, 008, 013, 04, 017,027, 029, 039, 040, 01,045, 097 Menigamery Ward 001, 002,007, 008, 049, 063, 081, 115, 117 ‘Mutitecn 007, 009,011. 087, 080, 094 NEC (004, 005, 096,018,026, 025, 045, 061, 062, 085 Noblex 087 Perio. 009 Phico 015, 016, 089 lot 088 i 025, 085, 030, z & 3 034,035, 019, | gver 8 (007, 013, 019, 23, 058,063, 064,005,073, 080, 02, 057 a I (007,011, 051, 059, 070,083, 087,089, 113, ¢ Q (005, 026, 029, 5,061,085, 114 8 g Ses ‘13,073, 028,03, 02,052, 054, 058, On, 08, 9,115 |Smee Shap 01,002,023, 097 [sam ‘Sony 075, 076, 077, 078, 079, 121, 122 Jos me Syria 08, 05,016,017, OF, 09,094 A | 4 5 z 8 i 04,076, 030 i & & g z § B | VeertorResasrch 005,062, 085,089,090, ‘Video Goncents 005, 027, 085, 089, 090 Wards (019,021,029, 087,088, 089,081, 064,087,118, 119, 120 (004,005,006, 026,062, 085 Downloaded From TheatreS ystem-Manual.com Manuals np 52 Serco omanztewe oil cap St ‘Operato the video component * For detals, refer tothe components operating instructions. 3 Itmay not be possible to operate some models TV POWER)" and “TV IN* buttons can be oparated as 1g a mode switen | is set tothe “DVD” position, regardless of tha position of modo switch 2, Dowiggaded From TheatreSystem-Manu nals Monitor TV 11 a video deck (VCR) system butions 1D TV system buttos 0-9: Channel bere TINS Wirgut switching VVOL+,— = Velume unown TVCHs, Channal aching Video deck system buttons YER POW: Power onftf VER CH s,— : Channel ewitehing SACRE Mal seach stor and fantockoen’) PouceSETTING UP THE SYSTEM Orr ee * Generally used system settings have aleady been made on the HEM30DV upon shipment from the factory, so the DHT:VQ0DV can be used as such if there is no need to make changes to the system, + In the cases described below, use the Quick Setup function to make the system settings before using the DHEM3300V. 1D When expanding the system configuration to a 6 1-or 71-channel system (see page 13, 47, 48) <2 When instaling the speakers ina large room {select at “ROOM SETUP" below) 3D When setting the TAPE function to the TWAUXI function and connecting both the digital and analog inputs (sot “FUNC. SETUP” bolow to AUR ik tem tings ctr eel Soup Satings Deby se <61CH> ich Speake oy | Select the speaker configuration you 2entctumes | Gong! | “Cont tate onflguration, pian to use pLamerctannal | a scneandchanes | 2suound cels Sister beck chore (2 suru back chanel Subwooter channel | Sunwonter channel | Subwoofer channel Room settings Select the speaker insta sion space. | givalrtto 36245 | Equlont to 45x54 | Equvlent to 60260 oom Serue ete rete mee Select the TAPE or MO function | STAPES sor | evn (analog input/output connectors only) Ise analog inputfourput Function serings 9 mpouuarcommecors er yoga. aig | Use analog | comets TAPE) and FUNC. SETUP o He eel8 | inputioutput connector | input/output connector | digital input connector inpuYoutput connectors and digital | ™P* ‘put = pt i ‘9 - TAPE function. MD tuncton (VIAUXD as the input connectors). TVIAUXI function Quick Setup procedure 3 ES Sees seme cee tee oes “ES owsmanney Main unit y" Oe \ * After one second, the currenty set valu is dispiayod. Main unit Femate control unit a rose 2 seconds Pit you do not want to change the wave, press the Tho dapiy ghts and “QUICK Q MENUSET burton to consnue. N A, bree sees anh bacon ssl ten you want SETUP” is dplayed «seu + TUNING + y Main unit Main unt Aer going once through pressing the MENUJSET button, the DHT-M320DV is. set back tothe standby mode Downloaded From TheatreSystem-Manual.com Manuals 27CE Basic system layout +The folow:ng is an example of the basic layout fora system consisting of eight spasker systems and @ television monitor: Conor speaker sytem Subsooter OswMs0 CMO Seow with the ont suas ae fash (SCAM (Si een the nee ole Dowiggaded FGl OPERATING THE SURROUND FUNCTIONS Achieving the optimum surround sound ‘+ Surround sound ean be achieved using the settings made upon shipment from the factory (the default settings, but to achieve even more ‘optimum surround sound, we tocommand using the tas tones to adust tho lavas of the cferont channels, sot the speaker distances (doiay timo}, otc For detalls, make the settings referring to page 20. Qin bike Rafer to pages 14 and check that all the connections are correct. * Operate the remote contro! unt at the “AMP” position Tin te paver Play the OVD, The danlay changes os shown below, Tin A tlngas te ye eae Siena esl ose! second afte th poner cee enero PIPED se Is turned on to prevent naise from being produced (ae oe on * Playback inthe Dolby Digital Surround mode, aries When paying a presecodes A sc Minot emote contol unit Select the DVD input source pqs sor 3 Nene RUNCTON * Playback in the DTS Surround mode. ( ) Ecarrge: When playing a prerecorded ( OEE dsc hn unit emote contol unt ‘Set the surround mode to “AUTO DECODE ‘The display becomes as shown below + Auto stereo ~ stereo playback svmcuece — Fit the vie Bonen he np modes sto "AUTO" andthe suru Q Togs inet9 “AUTO DECODE™ sepending ont sens GF tho dae bong played, Doby Oya, STS or POM selected and the saris re automaticaly doceded and Ree cnt it Bayed n the Daly Daal, DIS ao stereo mode + Fer coins on the. suneurd modes ane the surotnd paraetas, see "18 SURFOUND PLAYBACK © (page 28 - Q 2 Hino signals beng int Me unit emote contol nt ‘The volume is indicated on the main volume level play Downloaded From TheatreSystem-Manual.com Manuals 29Cite) 1 5 be Press the FUNCTION button to select the input function to be layed. ranerow Nin ut Remote control unit + The function switches as shown below. * The function only changes in the “>” direction when ‘operated from the remote control unit ‘+ Factory dofault (TAPE) ~ TAPE + DVD~sTUNER+> TAPE-=-+TV/AUK == AUX2 iho BvO, TAIN, AR wae iio see Pa Deaths te oie coaa wit NEUTMOEE sn Se Ree a © con“ AUTO" sore poston % Pomotaeontl unit [eto pew ove —- anton ‘+ ANALOG" cannot be solected when TV/AUX! or AUX? was selected as the inp function + “ANALOG” can be selected when “TAPE” is set to TWAUXI” at “FUNCTION SETUP" under “QUICK SETUP” in the detailed sattings ‘om Manual ied From TheatreSystem-Manual Input mode selection function + The input mode can be selected when the input function is set to DVD, TVAUXI, AUX2 Different input modes can be selected for each input function. Tho solactad input modo is stored in the memory for tho individval input functions. ‘When the ingut function is set to something other than the above, “ANALOG ONLY" is displayed and the input mode ‘cannot be selected ‘AUTO fauto mode! In this modo, tho typo of signal boing input 10 the digital and analog input torminals is dotected and the program in the set's suround decoder is switched automaticaly to play the signals forthe selected input function The presence or absence of digital signals is detected, the signals input tothe digital nput ae dented and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel storoo) format IF no digital signal OVD is being input, the analog input Jacks are selected Use this mode to play Dolby Digital signats @ POM [exclusive PCM signal playback mode) Decoding and playback are only performed when PCM, signals afe being input ) DTS fexclusive DTS signal playback mode) Decosing and playback ate only performed when DTS. signals are being inp @ ANALOG exclusive analog audio signal playback mode) ‘Tho signals input to the analog input jacks are played. (This cannot bo solactod in the TV/AUX1, AUX2 modo} 4# Tho input modo automatically switches to "AUTO" if you switch the input function fo DVD from anything other than Man unt emote control unit + The function swatches as shown below. [AUTODECODE —» 6cH STEREO —+ HALL— DOLBY VS—+ STEREO —* DIRECT —» AUTO DECODE ~~Seppe gn meso compere Input mode display ‘+ For operating instuctions, refer to the component's manual «In the AUTO mode se the VOLUME tuttons on the remote control unit to adjust the volume, «+ In the DIGITAL PCM mode BRAS EQUINE galon he manne ‘to roa ena The volume level io sie ee ‘splayed on the: Sole ord ewfanc oo 018 ‘splay. . Inthe DIGITAL DTS mode splecot ghe, Soto erefecu acca * In the ANALOG modo vis Q souyuie mn ay Input signal display Maint pence t «The vane canbe aust win the ge 01960 Note © DOLBYDIGTAL tRardoperaing ote npr sgn, suraurd made, speaker _— vcciaobn Sotingeancannal evel sot, 4may nbs posable to Dole os sc uo - dust be volar w 060. sos I To chock the currently playing program source te. | « pcs Pross tho MENUISET button. Display “STATUS" thon pross the seloct «¢ and m control Nowecr «sect + 1+ "DIG" Aghts when digil signals are input propery. Hf “DIG™ is flashing, check whether the connections ate proper and whether the ingut component's power is on Main nit Main unit Input mode when playing CD sources ‘+ Whon piaying CDs containing recordings of ive concerts, ot. in The current program source and surround settings are shown Te AUTOS mode: the seed may be eighty broken athe (nthe display each time the button is pressed o turned, baginning ths happens, switch a the “PEM" mode Input mode when playing DTS sources ‘+ IFDTS-compatible CDs are played in the “PCM” mode, noise is ‘output because DTS playback is not possible. To play a DTS compatible soutca, bo sure to st tho input modo to "AUTO" ot "DTS". ‘+ Noise may be generated atthe beginning of playback and while ‘searching dung DTS playback in the AUTO mode. 30, play in the DIS made, Downloaded From TheatreSvstem-Manual.eom Manuals 31Geen es [1] Adjusting the sound quality (SDB/PEQ) The SDBIPEQ function will nat work in the di Pose te SORIPEO baton 1 Thetis smcres 2 fous oath tine he SOBEQ Eton ened Qa & DEFEAT * The signals do not pass through the SOB, DRC and PEQI-3 adjustment circuits, providing higher quality sound. SDB ON '» SDB (Super Dynami DAC ON * DRG (Dynamic Range Compression) is turned on. # This parameter adlusta the dynamic range of the Dolby Digital or DTS sound. When listening with the volume turned relatively low, at night for example, set this to the ‘ON" to lower the peak of the sound and amplify the quieter sounds, narrowing the dynamic range and making the sound easier to listen to, * With DTS source, only displayed for sour with dynamic rango compression, PEQI-2 ‘+ Preset Equalizers turned on ‘+ Three types of bass/treble balances and surround channel olay settings are preset. Select them ae desired 1% If no operation is performed within 4 seconds, the display ‘switchos back to what was proviously displayod. lass) is tured on, compatible ied From TheatreSystem. com Manual 12] Adjustment the Sound Enhancer The SOUND ENHANCER function wil rot workin he dest mode. egcN | 6, Kaye or e584 Tres he SOUND ENHANCER tn Voi eee Sees tons cch Tho SSNs EinACeRanan posed emote central unit [> ENHANCER OFF —» VOCAL ENH SURRENH: ENHANCER OFF The SOUND ENHANCER setting is tuned oft VOCAL ENH * The VOCAL ENHANCER is tumnod on * Tho contor channol is emphasized and DRC is turned on. + When listening quiely at night, the vocals are easier to her SUAR.ENH ‘= The SURROUND ENHANCER is tured on * The surround channal is emphasized for 9 stronger sense of prosanco. 1 When SURROUND ENHANCER is turned on, SDB/PEQ is detested. When SDEYPEQ i tuned on, SURROUND ENHANCER is set to “ENHANCER [3] Turing the sound off temporarily [MUTING] Use ths to tu of th aud ouput epoca Teint ttn He cancatng MTING mde Press he MUTING btn gs, ane emote control unit NOTES: ‘+ The mute made is cancelled when the main unit's main volume. contol or one of the main volume contrl buttons onthe remote Control units operated ‘The setting is cancelled i the set's power is tured oftSURROUND PLAYBACK ra + Adjustments using the test tones can only be performed in the Auto” mode and are only vad for the AUTO DECODE Surround modes, The adjusted levels are automaticaly stored inthe memory jee¢ee '+ Even after acjusting using the test tones, the various channels can be adjusted using the procedure described below to suit the program saufce and your prerences 1 Remote eonvol unit, Press the CH SELECT button on te remota control unit. ‘The following 1s dsplayed: emote contrl unit DQ. _ Tesnss ste aus rom te arnt peers Ether tum tho MASTER VOLUME dial on the main unt or tse the VOLUME buttons on the remote cantrl unit to adjust the volume: Main uit Remote contrl unit Use the channel volume adjust buttons to adjust so that the lume of the test tones is the same forall he speakers, *The (< and >) cursor buttons on the remote control unit during the adjustments using the test tones. emote contrl unit Ger assina wing ne et ones, ast se tere ee cithor according to the playback sources otto sult your tastes, 8 desetbed below. & Pomoto ental unit Downloaded From TheatreSystem-Manual.com Manuals Duss tho solet < buton who tho above is delayed 10 select "LEVEL", ‘The level display shown below appears. moto contol unit Select the spsakor whose lovel you want to adjust ‘Tho channel switches as shown below each time the button is pressed NO—* FRONT. —* CENTER ec Caaveori— sumcuoi-— sarone cusaect & moto convel unit Sse yume level of te elected spear wide the ak emote contrl unit '® Once tho channel evel setting is completed, soloct “END” at stop 3. The display retuins to normal after several seconds. 33Crk nate ‘in tho auto decode modo it is possiblo to ply in the Dolby Digital or DTS Sutround mode, deponding on the format of the input signal *ILis also possible to play in te Auto Stereo, Dolby Pre-Logic I CinemayMusicfGamo or DTS NEO:6 Cinema/Music modo, according to the 2 channel mode setting {1 Dolby Digital and DTS surround playback (digital inputs only) ‘= Appicable sources ‘*Digtal inputs (DVD, TWAUXI and AUX? functions) Dolby Digtal mult-channel sour DTS sources Set theremote | control selector switches ‘Switch1 to DVD ‘Switch2 to AMP ons cian B Select the digital input function. (DVD or TWALX? or AUX? cigtal input) ncrat sin nit emote control unit ‘Set the input mode to "AUTO", 2 DTS sources can also be played inthe input mode “DTS neuro Bh Remote control unit ied From TheatreSystem-Manual.eom Manuals ‘Set tho surround mode to “AUTO DECODE™. surrOUND MOD sume one ron: Remote contrl unit 1042 is set to anything other than AUTO DECODE, the AUTO DECODE mede can be sat using the AUTO DECODE button on the remote contrat unit. Play @ program source containing the TSS] or BITES mark ‘The Dolby Digital indicator lights when (go DIGITAL™ =~ playing a Dotty Digital soures. ‘©The DTS indicator lights when payin DTS source » The modo is selectod automaticaly according to tho format of He source being played, [DTS = Display the suround parameters forthe source 2» Nothing is cispayed if there are no parameters that ean be adjusted b moto convol unit Select the various surround parameters and set them 2 The display returns to normal if no operation is performed for d seconds while the parameters are displayed erate convol unit ' Stop oparating buttons oneo the surround parameter settings have been completed. After several seconds the normal display reappears and the settings ae automaticaly sot ‘encoded in Dolby Digital can only be played in the Auto (Dalby Digital, Dolby Pro Logic Tor Auto stereo), Direct, ‘stereo or vital modes Other meds do not work when Dolby Digtal signals, DTS signals can only be played inthe stor00 of virtual modes. Other modes do not work when laying DTS signals,[212-channel mode settings * In the AUTO DECODE modo, itis possible to automatically conduct mu-channel playback in the Dolby Digital er DTS surround modo or play in the stereo 2-chamel made (AUTO STEREO mode: Factry dafault gottingl. Fr 2-channl input signals, one of four play mades can be cot vith the 2channel mode setting (Auto Stereo, Dolby Pro Logic Cinema, Dolby Pro Logic 1 Music and Dolby Pro Logie I Game). For analog and PCM sources, itis also possible to selact DTS NEO.6 Cinema and DTS NEO Music. ‘+ When the function is set to TAPE or TUNER, the “Auto Stereo” 2channel mode cannot be selected. To play in stereo, set the ‘surround mode to “STEREO” (page 29). 5} Scestitedesteu chert decode mode sing the (< and seen > | SELECT buttors. The mode switches as follows each time ons of the buttons is pressed: < seecr > Q & TUNINe a Ms Main uit Romote contd unit srogene ++ 0be { Set the remote control selector Ser eo => ODL switches 1 DISNEO.EC and DTS NEO.OM canbe selected for analog ‘Switch1 to DVD and PCM sources. ‘Switch2 to AMP The At Seo mode can be slcted when he function Js set to DVD, TVIAUXT or AUX2 Once the surround parameters have bean set, stop operating buttons. After several seconds the display returns to normal and the settings are automaticaly valicated NOTES: ii achanel decode mode cannot bo set thon: Dalby Distal Set te surround mode to "AUTO DECODE™ 5.1-chann! signals or DTS signals ave being input Lauro Dec00E* is Sptyed ten the ermal lay reapers SRO — sea ogg == ABORT Mat unt emote conte unt ‘Ifthe mode is set to anything other than AUTO DECODE, the AUTO DECODE mede can be sat using the AUTO DECODE button on the remote control unit. (se SURNOUND PARAMETER futon cote rene ccontral unit and select the 2channel decode mode, Parone oe sin anit Remote control unit » This can bo soloctod whon the digital input consists of no signal, PCM signals, Dolby Digital 2channel signals, 3s Well as when the analog inputs selected Downloaded From TheatreSysten fanual.com Manuals 35