B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) b>
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
8.7 DISPLAYING TOOL TRACKS DURING
MACHINING
Use the machining drawing function to display automatic operation tool tracks.
8.7.1. Showing/Hiding the Machining Drawing Function
You can show or hide display tool tracks during automatic operation.
<1> Press the [Change Info] soft key.
The set of soft keys changes.
<2> Press the [Machining Drawing] soft key.
Another list of soft keys appears.
Table 8.7.1 Showing/Hiding Machining Drawing
Name Description
Displays the machining drawing tile to show tool tracks during
WS automatic operation,
{Drawing ON]
Displays the feed information display tile and spindle information
\ display tle. Tool tracks are not shown during automatic operation,
(Drawing OFF]
8.7.2. Machining Drawing Tile
In the machining drawing tile, a machining material line and a tool track during
automatic operation are drawn. The axis and axis name that indicate the view
284B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
coordinates and the icon that indicates the parallel shiftrotation mode appear at
the bottom left.
Fig. 8.7.2 Machining Drawing Tile
Lines are drawn using the following colors:
Table 8.7.2 Drawing Method
Name Solididot Color
Material Solid Green
Fast feed path Dot Red
Ciaiting feed path Salid Light blue
8.7.3. Operations in the Machining Drawing Tile
You can perform the following operations when a tool track is displayed in the
machining drawing tile.
+ Automatically scale the tool track
+ Zoom in or out the tool track
+ Move the displayed position of the tool track
+ Switch the drawing coordinates
+ Rotate the tool track
+ Delete, start, and stop the tool track drawing
+ Specify paths for the tool track drawing
285B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
<1> Press the [Drawing Setting] soft key.
Table 8.7.3 Description of the Soft Keys
Name Desoription
‘Automatically scales the display fo show the entire tool track graphics
in the machining drawing tile.
"’Zooms in the tool track graphic.
Ej | Zooms out the tool track graphic,
[Zoom Out]
Displays the soft keys to move the graphics of the tool track ina
planar motion.
[Move]
gE Displays the soft keys to select the drawing coordinates.
[Fixed
Rotation)
Displays the soft keys to move the graphics of the tool track,
Ei
(arbitrary
Rotation]
SS Displays the soft keys to delete, start, and stop the tool track drawing,
{Drawing
Operation}
286B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
Name Description
Displays the soft keys to specify the drawing paths.
[Drawing
Path}
Thangos tho grape operation onthe Touch panel on Madea hal
Suppor touch opeation
a
4
[change
Operation}
8.7.3.1 Automatic scaling of the graphics of the tool track
You can automatically scale the display to show the entire tool track graphics in
the machining drawing tile.
<1> Press the [Auto] soft key.
8.7.3.2 Zooming in/out the graphics of the tool track
You can zoom in/out to display the graphics of the tool track.
1 Zoom in the graphic.
<1> Press the [Zoom In] soft key.
The drawing scale will be enlarged each time you press this soft key.
1 To zoom out from the graphics
<1> Press the [Zoom Out] soft key.
‘The drawing scale will be reduced each time you press this soft key.
8.7.3.3 Moving the displayed position of tool track grap!
Move the displayed position of tool track graphics.
287B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION)
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
+ If you move the displayed position, a tool track you have drawn is deleted, and
ZS drawings stated from the positon to which the graphic is moved. For this
AU- reason, If you want to check the behavior of the entire machining program,
move the graphic before executing automatic operation
<1> Press the [Move] soft key.
The soft keys to move the graphics of the tool track in a planar motion appear.
<2> Press the [Up], [Down], [Left], [Right], or [Center] soft key.
‘The tool track graphic will shift in the specified direction.
Table 8.7.3.3 Movement of the Displayed Position of Graphics
Name Description
‘Shifls the too! track graphie upward
‘Shifts the tool track graphic downward
‘Shifts the tool track graphic leftward.
| Shifts the tool track graphic rightward
Moves the center of the graphics of the too! track to the center of the
‘machining drawing tile, Scaling will not be changed,
[Center|
288B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
Name Description
Ends the movement of the displayed position of graphics.
[Back]
8.7.3.4 — Switching the drawing coordinates
‘Select the drawing coordinates to display the graphics of the tool track.
+ Ifyou specify the drawing coordinates, a tool track you have drawn is deleted,
and drawing is started from the position to which the coordinates are specified.
CAL For this reason, if you want to check the behavior of the entire machining
program, specify the coordinates before executing automatic operation.
<1> Press the [Fixed Rotation] soft key.
‘The soft keys to select the drawing coordinates appear.
Table 8.7.3.4 Switching the Drawing Coordinates.
Description
Selects the XY plane.
Selects the ZY plane.
Selects the YZ plane.
Selects the XZ plane.
289B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
Description
Ni
a ‘Selects the ZX plane.
3)
[fy Sete i omic cordnatesn whch he oa aco upd |
ag
[Isometric XY]
A ‘Selects the Isometric coordinates in which the +Z axis faces upward.
i However, the view will be opposite.
vanes
{Isometric XY]
a
we
[Isometric YZ)
El [Ends the switching of the drawing coordinates,
[Back]
8.7.3.5 Rotating the graphics of the tool track
Rotate the graphics of the machining material in an arbitrary direction with the
workpiece set to the center.
* Ifyou rotate the graphic, a tool track you have drawn is deleted, and drawing is
QS startes trom the position to whicn the graphic is rotated. For this reason, if you
CAU- want to check the behavior of the entice machining program, rotate the graphic
before executing automatic operation.
<1> Press the [Arbitrary Rotation] soft key.
The soft keys to rotate the graphics of the tool track appear.
<2> Press the soft key to rotate the graphics of the tool track.
Each time you press the soft key, the graphics of the tool track will rotate in the
corresponding direction.
290B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
Table 8.7.3.5 Rotation of the Graphics
Name Description
The graphics of the tool track will rotate in a counterclockwise
direction with the right-hand side (when facing the screen) as the
rotation axis.
The graphics of the tool track will rotate in a clockwise direction with
the right-hand side (when facing the screen) as the rotation axis.
[Bown]
The graphics af the tool track will rotate in a counterclockwise
direction with the upper direction of the screen as the rotation axis,
oH
[Left
The graphics of the tool track will rotate in a clockwise direction with
‘the upper direction of the screen as the rotation axis.
[Right]
The graphics of the tool track will rotate in a counterclockwise
direction with the near side (when facing the screen) as the rotation
The graphics of the tool track will rotate in a clockwise direction with
the near side (when facing the screen) as the rotation axis.
fo
[ecw
Ends the rotation af the graphics.
[Back]
8.7.3.6 Delete, start, and stop the tool track drawing
You can delete, start, or stop the tool track drawing,
This is used when partially checking the behavior of the machining program.
<1> Press the [Drawing Operation] soft key.
The soft keys to delete, start, and stop the tool track drawing appear.
291B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION)
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
<2> Press the [Delete], [Drawing Enable], or [Drawing Disable] soft key.
Table 8.7.3.6 Tool Track Drawing Operation
Name Description
¢
[Delete]
Sars the tol track drawing you press the [Drawing Enable] sof key
NS ‘when itis stopped by pressing the [Drawing Disable] soft key.
[Drawing
Enable]
‘Stops the tol track drawing,
‘This softkey is used to stop only the tol rac drawing without
stopping automatic operation
[Drawing
Disable]
Retums to the first page of the soft keys.
(P * We machining raving tes eisplyed th ol tack draving sas without
Ao prosig te [rowing Erb] st key
8.7.3.7 Specifying paths for the tool track drawing
You can specify whether to draw tool tracks for all paths or only selected paths.
<1> Press the [Drawing Path] soft key on the MEM mode base screen,
The soft keys to specify the drawing paths appear.
<2> Press the soft key to select paths for the tool track drawing,
292B-G4644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
Table 8.7.3.7 A check box for specifying a path
Description
Draws tool tracks only for paths currently displayed
[Selected
Path]
RY ene:
si
[All Paths}
293B-64644EN-1/06
CHAPTER 8 MACHINING (PROGRAM EXECUTION) >
8.7 DISPLAYING TOOL TRACKS DURING MACHINING
296A APPENDIX
This section describes the element data used in contouring programming,
A.A. XY PLANE GEOMETRY ...
A2 YZ PLANE GEOMETRY
3 XC PLANE GEOMETRY
A4 ZC PLANE GEOMETRY ...
AS ZX PLANE GEOMETRY ...
296
299
302
305
308
295B-64644EN-1/06
APPENDIX P A.1 XY PLANE GEOMETRY
At PLANE GEOMETRY
G1200 = Start
Defines the start point of the contouring geometry on the XY plane.
Element data Description
‘Start Point x |First coordinate value of the start point of the contouring
Coordinate X geometry
Start Point FY | Second coordinate value of the start point of the contouring
Coordinate ¥ geometry
(PP » The series of geometries that form the contouring geometry must be positoned
nemo between the start point (61200) and end point (61206).
G1201 Linear
Defines the straight line of the contouring geometry on the XY plane,
Element data Description
Linear Direction [D Select the direction of the straight line displayed on the soft keys.
[Right): Enter a "ight" inear direction
[R-up}: Enter an "upper right linear direction
[Up]: Enter an "up" linear direction
[L-up: Enter an "upper let’ linear direction
[Left Enter a “lef” linear direction
[L-down]: Enter a “lower let" near direction
[Down]: Enter a "down" linear direction
[R-down}: Enter a “lower right inear direction
End Point IX | First coordinate value of the end point of the straight line
Coordinate X
End Point FY | Second coordinate value of the end point ofthe straight line
Coordinate Y
Angle A__|Angle of the straight line
Last Connection |_| [Tangent Tangent to the preceding geometry
[None]: Not tangent tothe preceding geametry
Next Connection |M__| [Tangent] Tangent tothe following geometry
[None}: Not tangent tothe following geometry
296G1202
G1203
B-64644EN-1/06
APPENDIX b> A.1 XY PLANE GEOMETRY
Arc (CW)
Defines the clockwise arc of the contouring geometry on the XY plane.
Element data Description
End Point X__ | First coordinate value ofthe arc end paint
(Coordinate x
End Point [¥ [Second coordinate value of the are end point
Coordinate Y
Arc Radus [R__|Radus ofthe are
‘CenterPoint [GX | First coordinate value of the are center
(Coord. CX
(GenterPoint [CY _| Second coordinate value of the arc center
Coord. CY
Last Connection |L | [Tangent]: Tangent to the preceding geometry
[None]: Not tangent to the preceding geometry
Next Connection |M_— [Tangent]: Tangent to the following geometry
[None]: Not tangent tothe following geometry
Path Type U [Long Path: Create the arc with ong path
[Short Path]: Create the arc with short path
Arc (CCW)
Defines the counterclockwise arc of the contouring geometry on the XY plane.
Element data Deseri
End Point, X__ | First coordinate value of the are end point
(Coordinate x
End Point TY [Second coordinate value of the arc end point
Coordinate Y
Arc Radius TR _ [Radius of the are
Center Point | CX_ | First coordinate value of the are center
(Coord, CX
‘Center Point GY _| Second coordinate value of the are center
(Coord. CY
LastConnection |L__ | [Tangent]: Tangent to the preceding geometry
[None]: Not tangent to the preceding geometry
Next Connection |M [Tangent]: Tangent to the following geometry
[None]: Not tangent tothe following geometry
Path Type U_|[Long Path: Create the are with ong path
[Short Path]: Create the arc with short path
297B-64644EN-1/06
APPENDIX P A.1 XY PLANE GEOMETRY
G1204 Chamfering
Defines the amount of chamfering in the contouring geometry on the XY plane.
Element data Description
Chamfering | Chamfering amount (radius value, positive value)
Amount
G1205 CornerR
Defines the comer R radius of the contouring geometry on the XY plane.
Element data Description
ComerR Radius [R | Comer radius
G1206 End
Defines the end point of the contouring geometry on the XY plane,
+ The series of geometries that form the contouring geometry must be positioned
nemo between the start point (61200) and end point (61206)
298B-64644EN-1/06
APPENDIX ® A.2 YZ PLANE GEOMETRY
JA 2 YZPLANE GEOMETRY
G1300
G1301
Start
Defines the start pont of the contouring geometry on the YZ plane.
Element data Description
Start Point Y__ [Fist coordinate value ofthe start point of the contouring
Coordinate Y geometry
Start Point Z| Second coordinate value of the start point of the contouring
(Coordinate Z
Program Coord. |@
‘System
|geometry
[Coordinate 1]: Program coordinates 1
[Coordinate 2: Program coordinates 2
(P ~The sties of geometes tat orm the contouring geomety must be postoned
Memo. between the start point (61300) and end point (61306).
Linear
Defines the straight line o
contouring geometry on the YZ plane.
Element data
Description
Linear Direction [D
[Select the direction of the straight line displayed on the soft keys,
[Right Enter a “right” linear direction
[R-up]: Enter an "upper right" linear direction
[UpI: Enter an “up" linear direction
[L-up| Enter an “upper laf" linear direction
[Left: Enter a “left” linear direction
[L-down}: Enter a “lower left linear direction
[Down]: Enter a "down" linear direction
[R-down]: Enter a “lower right" linear direction
End Point |Y [First coordinate value of the end point ofthe straight ine
Coordinate Y
End Point Z | Second coordinate value of the end point ofthe straight line
(Coordinate Z
‘Angie [Angle of the straight ine
Last Connection —|L
Next Connection |M
[Tangent]: Tangent to the preceding geometry
[None]; Not tangent to the preceding geometry
[Tangent Tangent to the following geometry
[None]: Not tangent tothe folowing geometry
299B-64644EN-1/06
APPENDIX Pb A.2 YZ PLANE GEOMETRY
G1302
G1303
Arc (CW)
Defines the clockwise arc of the contouring geometry on the YZ plane.
Last Connection [L
Next Connection | M
Element data Description
End Point, YY | First coordinate value of the arc end point
Coordinate Y
End Point Z| Second coordinate value of the arc end point
Coordinate Z
‘Arc Radius R__[Radius of the are
Center Point CY _|First coordinate value of the arc center
Coord. CY
Center Point GZ_| Second coordinate value of the arc center
Coord. CZ
[Tangent): Tangent to the preceding geometry
[None]: Not tangent to the preceding geometry
[Tangent]: Tangent to the following geometry
[None]: Not tangent to the following geometry
Pain Type T|ikone Path Greate the are wth org path
[Short Path}: Create tho are wih short path
Arc (CCW)
Defines the counterclockwise are ofthe contouring geometry onthe Y2 plane
Floment data Deen
EndPont | Fiat coordnate valve ofthe arc end point
Coordinate ¥
End Pont 2 | Second coordinate valve afthe arc end paint
Coordinate Z
Frc Radius | |Radus ofthe aro
Center Point |€Y [First coordinate value of he ae center
Coord CY
Cenier Part J62| Second coordinate vale ofthe are cantar
Cora. 62
Last Connection [L
Next Connection [M
[Tangent]: Tangent to the preceding geometry
[None]: Not tangent to the preceding geometry
[Tangent]: Tangent to the following geometry
[None]: Not tangent to the following geometry
Path Type U
[Long Path: Create the are with long path
[Short Path]: Create the are with short path
300