This document outlines tasks to parameterize, integrate, and control a drive with Startdrive software including: parameterizing and testing a drive, integrating the drive into a device configuration, resetting the inverter factory settings, setting basic parameters via Startdrive, and controlling the drive via a PLC. The tasks will be done using an S7-1500 PLC to control a CU250S-2PN drive over PROFINET at the VGU Automation Lab.
This document outlines tasks to parameterize, integrate, and control a drive with Startdrive software including: parameterizing and testing a drive, integrating the drive into a device configuration, resetting the inverter factory settings, setting basic parameters via Startdrive, and controlling the drive via a PLC. The tasks will be done using an S7-1500 PLC to control a CU250S-2PN drive over PROFINET at the VGU Automation Lab.
This document outlines tasks to parameterize, integrate, and control a drive with Startdrive software including: parameterizing and testing a drive, integrating the drive into a device configuration, resetting the inverter factory settings, setting basic parameters via Startdrive, and controlling the drive via a PLC. The tasks will be done using an S7-1500 PLC to control a CU250S-2PN drive over PROFINET at the VGU Automation Lab.