The document provides instructions for configuring TT-3608A/TT-3608A-220 and H1252A/H1252B printer types for operation with either radio telex equipment or Inmarsat C equipment. The configuration process involves connecting the printer to a PC with a CD-ROM containing configuration files, running the appropriate file to set the printer controls for the intended system, and verifying the configuration by printing a test sheet.
The document provides instructions for configuring TT-3608A/TT-3608A-220 and H1252A/H1252B printer types for operation with either radio telex equipment or Inmarsat C equipment. The configuration process involves connecting the printer to a PC with a CD-ROM containing configuration files, running the appropriate file to set the printer controls for the intended system, and verifying the configuration by printing a test sheet.
The document provides instructions for configuring TT-3608A/TT-3608A-220 and H1252A/H1252B printer types for operation with either radio telex equipment or Inmarsat C equipment. The configuration process involves connecting the printer to a PC with a CD-ROM containing configuration files, running the appropriate file to set the printer controls for the intended system, and verifying the configuration by printing a test sheet.
The TT-3608/TT-3608-220 and H1252A/H1252B printers as delivered from factory are configured for operation with the Inmarsat C equipment whereby providing paper alarm information to the Message Terminal TT-3606E/ DT4646E, as required by Inmarsat. In case the printer is to be used for operation with radio telex equipment re-configuration of the printer for correct paper control for GMDSS telex operation is required by applying the following configuration procedure:
1. Remove the printer head transport safety device.
2. Connect the printer
a. Connect printer to a 24V DC power source. b. Connect printer to a PC with a CD-ROM drive using standard parallel printer connection. 3. Insert paper in the printer. 4. Power up the printer and the PC. 5. Insert the “SAILOR printer CD-ROM” in the PC CD-ROM drive. 6. Perform the following procedure from the PC: 40523
a. Double click “My Computer” at the Windows Desktop.
b. Double click the CD-Rom drive containing the “SAILOR printer CD-Rom”. c. Start configuring by double clicking the appropriate file name: • Radio telex.exe • Inmarsat C.exe d. A window will open and then close again after a few seconds if the configuration has been performed ok. If the window does not close then close it by pressing Ctrl + C, cycle power to the printer and repeat step 6. 7. Turn off the printer. 8. If re-configuring a printer used with radio telex operation to Inmarsat C operation use same procedure and select the <Inmarsat C.exe> file instead.
To verify correct printer configuration as required proceed as follows:
1. While powering up the printer press down the first and fourth buttons as counted from left at the printer front. Keep both buttons pressed until the printer starts printing a test sheet. 2. If the printer configuration has been completed successfully the following text will appear in the first line of the test sheet: