BRUCE EXCAVATOR MOUNTED VIBRO HAMMER
www.powerquip.co.kr
WT,
_BRUGE
fl TA
FILING EQulg Ad
CONSE NIONS
J >I NF
"MACHINERY |
Midi i
) -
ee
VBR ATORVAHANIMIERS at
EXCAVATORIMOUNTEDSIYBE
Scan et
BRUGE|EXCAVATOR| MOUNTED) VIBRO| HAMMERS,
HIGH POWERED VIBRO HAMMER INTO YOUR EXCAVATOR FROM
BRUCE WORLDWIDE VIBRATION TECH PUNDITS.BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS
OUTSTANDING FEATURES OF BRUCE EXCAVATOR MOUNTED
VIBRO HAMIVIER A VARIETY OF PILE DRIVING JOB
MAIN FEATURES
* No necessary to additional power pack and power unit
and just pick up the hydraulic supply from existed
excavator supply line.
* High strength and powered hydraulic clamp device is
delivering sheet pile clamping ensuring and grabbing.
* Reliable hydraulic motor deliver high efficiency of
vibrating power,
* Hydraulically operated 360° Rotation functioning are
convenient for easy positioning the sheet pile and easy
clamping the sheet pile.
* High quality and reliable life of elastomers are adopted
to isolate vibration being transmitted to excavator thus
eliminated vibration is transmitted to excavator and
preventing the machine.Vibration
RSit)e)9 (esse
OUTSTANDING FEATURES OF BRUCE
EXCAVATOR MOUNTED VIBRO HAMMER
@ ROTATIONAL GEAR BOX a
It has been built with a rotational gear box
that allows the equipment to rotate 360° by
hydraulically for the ease of pile positioning.
@ VIBRATION SUPPRESSOR
This is the part of the Vibrator coupled to the
boom, It's connected to the Gear Housing
using Elastomers that allows a traction during
extractions.
Onin i
Clamp cylinders are made from solid blocks
to eliminate troublesome guards and tie-rods
It's well suited for any type of sheet piling job.
'@ ELASTOMER RUBBERS i
The qualified Elastomers are selected for
Dynamic part that creates environmental)
low noises and are substantially toug!
enough to sustain the power of heavy
extraction during operations which could
result in 90% of vibration isolation can be
provided for equipment and personal safety.
It consists of the group of Eccentric Bodies
Where the Eccentric Weights are assembled
with hydraulic motors used for transmitting
‘the motion to the Eccentric Weights.
wwwpowerquip.coktr Q2 ,.. 03Shinsegae Powerquip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS
ADVANTAGES OF BRUCE’S
A360 DEGREES OF ROTATIONAL GEAR BOX
FOR EASY SHEET PILE POSITIONINGS
Do not make any efforts
to adjust equipment to the
desired piling work. Rotational Gear Box
é tat alows ero
epee rite Se Pyrat
sequence of pile sections for easy pile positioning
Rotational Gear Box is the most profitable pile driving work.
Itlocates the sheet piles exactly at the desired sequence of pile
sections and ensuring that piles will quickly interlock.
ADVANTAGES OF BRUCE’S
HIGH STRENGTH ALLOY STEEL OF CLAMP
FOR DURABILITY AND CHANGEABLE JAWS
Intomal clamp is protected by Ciamp fixing postioning Botts are
Check Valve from hose he ~ standardized to set up other
damage occurrences # Caamps lke Casing or Pipe pile
2 Game.
Clamp Cylinder is machined Changeable jaws are made of high
from Cast-lron to eirinate urabilty of Alloy Stee
troublesome and slides to It cuts the time need for repairs.
‘support heavy loads.
All our clamps delivers the highest level of productivity
Operators on site will be satisfied with our changeable high
strength alloy steel jaws in terms of timely replacing them.ADVANTAGES OF BRUCE’S
BEING FASTIDIOUS ABOUT ELASTOMERS
FOR HEAVY EXTRACTION PILE DRIVING JOB
sustain the power of heavy extraction pile job
ur experience in using Long
Elastomer Rubbers create no fallure mode lik
land shread in Pieces while in operations
We choose high qualified Elastomer Rubbers
That provide a minimum of 30% vibration isolation
for the equipment and personal safety.
BRUCE SUPPLIES A VARIETY OF
EXCAVATOR MOUNTED VIBROS
FOR MULTIFUL APPLICATION OF PILE JOB
==
aire |
(ME RUCE TET
Vibro with Universal Clamp
Proven high qualified Elastomer Rubbers are selected to
wwwpowerquip.cokr 04... 05Shinsegae Powerquip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS,
BRUCE SUPPLIES A VARII
Oo
EXCAVATOR MOUNTED VIBROS
FOR MULTIFUL APPLICATION OF PILE JOB
Vibro with Sheet Pile Clamp
Pipe Pile Dia. upto 150mmSELECTION OF BRUCE
ECCAVATOR MOUNTED VIBRATORY HAMMER
Soil Conditions : Loose Soil & Medium Dense Soil
Sheet Pile Length & Driving Depth (m)
alte | P(g | Amplitude
au) Siu) au
Il The A bove Vibratory Hammer Selection Chart has been derived from BRUCE experiences.
www.powerquip.co.krip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS
&
o
Fo
&
g
Cue bcc L Loe
20 ton ~ 25 ton Excavators
w
VIEW “A”
D& WA dis requested and
mounted at customers excavator
Ree
Short Arm with BRUCE SGV-40
Short Extension
‘Arm with SGV-40
for up to 81m
of Increased
driving height
S30
VIEW "8"
1290
1815)
oOoAVARIETY OF LONG
WITH SGV-40 FOR EXT!
CU ker ELLs OCCU)
26 ~35 tons of Excavators Long Arm with BRUCE SGV-40
gan!
iY
Long Extension
‘Arm with SGV-40
for up to 95m
of Increased
driving height
SGV-40 with Long Extension Arm
2740
590
Ae
SGV-40
MODEL : SGV-40L VEN et
g
od 2 a0 *
: a
VIEW “A"
1090
D&W 8d ie requested and
mounted at customer’ excavator
worwpowerguip.cokr OS ... O9Shinsegae Powerquip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS,
Cue bcc L Loe
36-45 tons of Excavators
SGV-60 with
1800
VIEW “Ar
D&W &d is requested and
‘mounted at customer's excavator
Short Arm with BRUCE SGV-60
Short Extension
‘Arm with SGV-60
for up to. 9.1m
of Increased
driving height
Short Extension Arm
530
SGv-60
VIEW "8"
1620
7380
1200AVARIETY OF LONG
WITH SGV-60 FOR EXT!
CU ker ELLs OCCU)
36~45 tons of Excavators Long Arm with BRUCE SGV-60
Long Extension
‘Arm with SGV-60
for up to 99m
of Increased
driving height
SGV-60 with Long Extension Arm
530
MODEL : SGVE-60L.
VIEW “8
1520
Pin Dis “a!
w
VIEW “a”
7200
1230
D&W Adis requested and
‘mounted at customers excavator
Ad
wuwpowerquip.cokr 10),BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS
—-—
we,
A PROLONGED BOOM WITH LONG EXTENSION
ARM INTO ANY 30 TONS ABOVE EXCAVATORS
AIMING AT 12 METERS OF SHEET PILES
30tons above Excavators
LaTeX ss XE Ca
Prolonged Boom with Long Arm
Prolonged Boom
with Extension
Amnespecay aining
at 12meters
Sheet Pile
driving jogA PROLONGED BOOM WITH A LONG EXTENSION
ARM INTO ANY 30 TONS ABOVE EXCAVATORS
AIMING AT 12 METERS OF SHEET PILES
BRUCE PROVIDE CUTTING-EDGE TECHNOLOGY TO
BEAR ON MANY OF THE ENVIRONMENTAL PROBLEMS
SURROUNDING SHEET PILE DRIVING JOB TARGETING AT 12 METRS
OF PILE DRIVING WORK TO BUILE MORE !
wormpowerquip.cokr 12... 1BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS
9 METERS OF SHEET PILE DRIVING WITH
BRUCE EXCAVATOR MOUNTED VIBRO HAMMER
A 28 tons of excavator is conducting a 9 meters of Sheet Pile work.
+ Place a Sheet pile on the ground + Hammer lifts the Sheet Pile
+ Lower the hammer with a excavator + Rotating Boom Bracket starts swiveling
+ Hang a Sheet Pile with a steel rope + Hammer is positioning to clamp
+ Hammer is fully swiveled 360 ° + Sheet Pile is driven downwards
+ Hammer is clamping the piles slightly + Hammer is clamping the piles tightly
+ Hammer starts vibrating to drive + Hammer completes Sheet Piling.
BRUCE Vibro Hammer is well suited to drive and extract the piles.
It will provide the solutions for those needing local supply in
relations with the project maybe a civil foundation construction
project requiring an advanced technology.DESCRIPTION OF OPERATIONAL PIPING LINES
MOUNTED ON THE EXCAVATOR
Dikpw Pressure Le
(Ratu Line)
igh Pressure ne
(Sippy Une)
\dsep vave
Zz
F Vibratory Hammer
Foot Pedal
Cont Vat
be
SOF ca Fa
Exc Noted Vie Hare Mod 51408960 tha
totational Gear |
‘Swiveling around 360 degree by | ry movement.
> Optional purchase of Extension Arm is available for extra driving height and
inca oma ids crnngenn
» Bing Kits includ tom Stop Va,
igh ProseurLino, Piping be Vslery Harmer & Fting Nels.
BRUCE EXCAVATOR MOUNTED VIBRO ON SITE
wow.powerquip.cokr 14...Shinsegae Powerquip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS,
OPERATING DATA
VIBRO SERIES it_[ scv-40 | SGv-60 | SGV-B0E |
Note : SGV-40 / SGV-60 / SGV-80E can be mounted on the excavator.
Eccentric Moment (Nm) 50 65 88
(inibs) 443, 576 781
{kg.m) 5.1 6.63 9
Centrifugal Force (tons) 52 eT 74
Max. Frequency (vpm) 3000 3000 2700
Max Amplitude (inch) 0.39 0.51 0.59
(mm) 10 13, 15
Pile Clamp Force (kN) 598 598 785
(tons) 60 60 80
Max. Crane Pull (KN) 200 200 300
(tons) 20 20 30
Required Oil Flow (pm) 200 250 300
Max. Operating Pressure (psi) 3980 3980 3980
(bar) 280 280 280
+ The operating pressure is 180-230 bar
DIMENSION & WEIGHT
‘Overall Length (L) (mm) 1090 1230 1600
(inch) 429 48.4 62
‘Overall width (W) (mm) mW WW 902
(inch) 30.6 30.6 35.5
Overall Height (H) (mm) 1815 1880 1950
(inch) 715 74 76.8
Weight of Sheet Pile Clamp (ka) 230 230 480
(bs) 507 507 1080
‘Weight of Pipe Pile Clamp. (kg) 342 342 342
(bs) 754 754 754
Pipe Pile Size (in/mm)| 6/1524 | 6/1524 | 6/1524
Total Weight with Sheet a) 7490 1750 2100
Pile clamp (ibs) 3285, 3858 4630,
Suitable Excavator 20~30 ton | 30~40 ton | 40~50 ton
Suitable Power Pack PQ-200V_ | PQ-200V | PQ-250V
+ Overall Height (H) indicates only for a single clamp, a double clamp is not included.
+ The maximum casing pile size is dia. 400mm, Ask to us !
+ The data, values and measurements are based on current models and values at the time our
information was complied.
+ Due to constant new developments and improvements, we reversed the right to make changes
without prior notice.POWER PACK FOR VIBRO HAMMER
INTO THE CRANE SUSPENDED TYPE
MODEL PQ-200V & PQ-250V
Not only the small sized hydraulic pile hammer and also Excavator Mounted Vibro
hammer Model SGV-40, SGV-60 & SGV-80E are provided by the BRUCE PQ series
of power pack with a high qualified hydraulic power supply system enhancing the
increased cooling capacity for the constant job performance,
Closed loop top hydraulic system and heavy-duty structure for serviceabilily & reliability
BRUCE designed Relief Block and control valve for minimizing power loss and fluid fault
Fully equipped Control Panel with automatic shutdown to protect critical components
Reliable Doosan diesel engine with powerful cooling capacity of pumps
” Remote Control Box includes throttle control for economical fuel usages
Supplied with environmentally friendly biodegradable hydraulic oll
en
wowpowerquip.cokr 16,Shinsegae Powerquip BRUCE EXCAVATOR MOUNTED VIBRO HAMMERS,
OPERATING DATA
POWER PACK SERIES Pa-200V PO-250V
Engine Type, Standard Maker Doosan"! | DOOSAN
Engine Power (HP 7k) |154HP/115 kW| 230HP /172 KW
@ 1900rpm | @ 1900 rpm
Setting Pressure (bar/ps) | 30/4352 | 3900/4352
Rated Flow Rate (pm /gpm)} 200/53 325/86
Hydraulic OilTank Capacity | (iter/ gal) | 350/93 600/159
Fuel Tank Capacity ea | 000 500/132
DIMENSIONS
Overall Length (Q) (mm/t) | 2500/8.20 | 2900/9.51
‘Overall width (W) (mm/t) | 1300/4.27 | 1600/5.25
Overall Height (H) (mms) | 1850/6.07 | 2100/6.89
WEIGHT
Dy (kg/ibs) | 3500/7716 | 3800/8378
Operating (kg/ibs) | 4000/8819 | 4400/9700
‘SUITABILITY
Suitable BRUCE Vibro Hammer | BRUCE SGV-40 / SGV-60 SGV-80E
NOTE: %=' Cummins Engine is optional.
+ The data, values and measurements are based on current models and values
at the time our information was complied.
+ Due to constant new developments and improvements, we reversed the right
tomake changes without prior notice.19
COMBINATION OF MODEL
VIBRO SGV-40 + POWER PACK PQ-200V
VIBRO SGV-60 + POWER PACK PQ-200V
VIBRO SGV-80E + POWER PACK PQ-250V
wwwpowerquip.cokr 18...
NOTE: »1 Doosan Engine is as standard and Cummins Engine is optional.
+ The data, values and measurements are based on current models and values
at the time our information was complied.
+ Due to constant new developments and improvements, we reversed the right to
make changes without prior notice.a
3.
POWE!
AE
E
SHINS!