Jordan University of Science & Technology
Engineering Department
Engineering Drawing A, ME 200 1 Semester 2022/2023
Mid-Term Exam Monday 28/11/2022
Student name: ID No. Section No.
_———
For the following 3D solid Model; Create necessary layers and Draw: -
Eront and Left side views.
Save your drawing in My Documents with name “yor i er”
= Write your name, ID NO. and section number inside the file.
= Pay attention to the due time of uploading.
Upload your file to E-LEARNING before the time finished and no files will be accepted after that.
If ELearning interrupted during uploading, you can send your file to nkalzztreh(@just.edu.jo
30, Thru
64010 C'Bore
‘on both sides
Good Luck
Scanned with CamScanner