Professional Documents
Culture Documents
Annotation Dimensions and Measurements Show Incorrect Values in AutoCAD
Annotation Dimensions and Measurements Show Incorrect Values in AutoCAD
US Sign in
Issue:
When using annotated dimensions or measurements, the values are not correct or have
changed in AutoCAD. The values show too many or too few decimal places, or the fractional
value is more or les precise than desired.
Causes:
· The drawing or dimension precision is set too precise, or not precise enough.
· The drawing and dimension precision are not the same, causing conflicting
measurements in AutoCAD.
Solution:
Steps to attempt to fix the issue:
· Change the drawing precision:
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Annotation-dimensions-show-incorrect-values-in-AutoCAD.html 1/3
3/21/24, 10:34 AM Annotation dimensions and measurements show incorrect values in AutoCAD
4. In the Primary Units tab verify or change the Unit Format and Precision to as
desired.
5. Select OK to save the changes.
Note: If the values are still showing incorrectly, change the precision settings in both
UNITS and DDIM to match.
See Also:
Yes No
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Annotation-dimensions-show-incorrect-values-in-AutoCAD.html 2/3
3/21/24, 10:34 AM Annotation dimensions and measurements show incorrect values in AutoCAD
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use |
Legal | © 2024 Autodesk Inc. All rights reserved
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Annotation-dimensions-show-incorrect-values-in-AutoCAD.html 3/3