Professional Documents
Culture Documents
List of ISO TC67 standards and their status with API, CEN and
various other standards developing organisations
Global experience
The International Association of Oil & Gas Producers has access to a wealth of technical
knowledge and experience with its members operating around the world in many different
terrains. We collate and distil this valuable knowledge for the industry to use as guidelines
for good practice by individual members.
Disclaimer
Whilst every effort has been made to ensure the accuracy of the information contained in this publication,
neither the OGP nor any of its members past present or future warrants its accuracy or will, regardless
of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which
liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use
by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform
any subsequent recipient of such terms.
This document may provide guidance supplemental to the requirements of local legislation. Nothing
herein, however, is intended to replace, amend, supersede or otherwise depart from such requirements. In
the event of any conflict or contradiction between the provisions of this document and local legislation,
applicable laws shall prevail.
Copyright notice
The contents of these pages are © The International Association of Oil and Gas Producers. Permission
is given to reproduce this report in whole or in part provided (i) that the copyright of OGP and (ii) the
source are acknowledged. All other rights are reserved.” Any other use requires the prior written permis-
sion of the OGP.
These Terms and Conditions shall be governed by and construed in accordance with the laws of Eng-
land and Wales. Disputes arising here from shall be exclusively subject to the jurisdiction of the courts of
England and Wales.
Global standards used locally worldwide
Report № 4210
September 2010
Acknowledgements
This report was compiled by the OGP Standards Committee
©OGP i
International Association of Oil & Gas Producers
ii ©OGP
Global standards used locally worldwide
The vision of the petroleum, petrochemical and natural gas industries standards effort in ISO Tech-
nical Committee 67 is global standards used locally worlwide. This vision is also reflected by OGP
Report № 381: Position paper on the development and use of international standards. The purpose of
the following list is to show where we are in this vision at the time of issue of this OGP Report. The
report will be revised from time to time to show the further steps of the standards development and
adoption process.
GB – China column:
The only matter to be raised is that the Chinese number of the ISO adopted standard is different
from the ISO one.
©OGP iii
International Association of Oil & Gas Producers
iv ©OGP
ISO title ISO ABNT – Brazil API – USA CEN – Europe DSTU – Ukraine GB – China GOST R – Russia GSO – Gulf ST RK – Kazakhstan
Petroleum and natural gas industries. (ISO 3183-1:1996) GB/T 9711.1-1997 GOST R ISO 3183-1; ST RK ISO 3183-1:2007
Steel pipe for pipelines. Technical delivery replaced by ISO ISO 3183-1:1996 (2007-2009)Steel (ISO 3183-1:1996 IDT)
conditions. Part 1. Pipes of requirement 3183:2007 EQV pipes for pipelines.
class A Specifications. Part
1. Requirements for
class A pipes
Petroleum and natural gas industries. (ISO 3183-2:1996) DSTU ISO 3183-2 (IDT) GB/T 9711.2-1999 GOST R ISO 3183- ST RK ISO 3183-2:2007
Steel pipe for pipelines. Technical delivery replaced by ISO ISO 3183-2:1996 2;(2007-2009)Steel (ISO 3183-2:1996 IDT)
conditions. Part 1. Pipes of requirement 3183:2007 EQV pipes for pipelines.
class B Specifications. Part
2. Requirements for
class B pipes
Petroleum and natural gas industries. (ISO 3183-3:1999) GB/T 9711.3-2005 GOST R ISO 3183-3 ST RK ISO 3183-3:2007
Steel pipe for pipelines. Technical delivery replaced by ISO ISO 3183-3:1999 (2007-2009)Steel (ISO 3183-3:1999 IDT)
conditions. Part 1. Pipes of requirement 3183:2007 IDT pipes for pipelines.
class C Specifications. Part
3. Requirements for
class C pipes
PNGI – Steel pipe for pipeline ISO 3183:2007 API 5L, 44th ed/ISO GOST R ISO 3183- GSO ISO 3183:2008
transportation systems 3183:2007 (MOD) 2010 Steel pipes for
pipelines of PNGI.
©OGP
General specifications
Gas turbines – Procurement - Part 5: ISO 3977-5: 2001 EN ISO 3977-5:2003 +
Applications for Petroleum and natural gas COR1: 2007
industries
PNGI – Formulae and calculations for ISO TR 10400:2007 API TR 5C3, 6th ed/ISO GB/T 20657-2006 Plan for 2010-2011 GSO ISO/TR 10400:2009 ST RK 1252-2004 (ISO
casing, tubing, drill pipe and line pipe (Rev. of ISO 10400:1993 (IDT) ISO 10400:1993 – TC 357 GOST R (ISO 10400:1993, MOD)
properties 10400:1993) MOD 10400:2007, MOD)
PNGI – Care and use of casing and tubing ISO 10405:2000 EN ISO 10405:2006 Plan for 2009 UA/TC146 GB/T 17745-1999 Plan for 2010-2011 ST RK 1256-2004 (ISO
ISO 10405:1993:IDT - TC 357 GOST R (ISO 10405:2000, NEQ)
10405:2000, MOD)
PNGI – Drilling and production equipment ISO 10407:1993 API RP 7G: 1998 (MOD) Revision in progress in ST RK ISO 10407:2004
– Drill stem design and operating limits (Fast Track) (In +erratum 2000 + add. CEN/TC 12 (prEN ISO (ISO 10407:1993 IDT)
revision as ISO 2003 10407-1)
Specification revision)
PNGI – Pumping units – Specification ISO 10431:1993 API Spec 11E 18th ed/ISO prEN ISO 10431 (NWI Plan for 2009 UA/TC146 ST RK 1260-2004 (ISO
(Fast Track) (NWI 10431:1993 (IDT) cancelled) 10431:1993, NEQ)
cancelled)
PNGI – Downhole equipment – Subsurface ISO 10432:2004 API Spec 14A 11th ed/ISO EN ISO 10432:2004 (2nd Plan for 2009 ST RK ISO 10432:2004
safety valve equipment 10432: 2004 (IDT) edition) (ISO 10432:2004 IDT)
Bolted bonnet steel gate valves for ISO 10434:2004 (in API 600 12th edition/ISO EN ISO 10434:2004 (CEN DTSU ISO 10434 (IDT) GB/T 12234-2007 ST RK ISO 10434:2006
petroleum, petrochemical and allied revision) 10434:2001 (MOD) TC 69) Plan for 2008 ISO 10434:2004 (ISO 10434:2004 IDT)
industries EQV
PPNGI – Steam turbine-Special purpose ISO 10437:2003 (in API Std 612 6th edition/ EN ISO 10437:2003 (in GSO ISO 10437:2008
application revision) ISO 10437:2003 revision WI 231)
PPNGI – Lubrication, shaft sealing and ISO 10438-1:2007 API Std 614 5th edition/ EN ISO 10438-1: 2007
PNGI – Steel pipes for use as casing or ISO 11960:2004 (3rd API Spec 5CT 8th ed/ISO EN ISO 11960:2004 (3rd DSTU ISO 11960:2006 GB/T 19830-2005 GOST R 53366-2009 ST RK 11960-2009 (ISO
tubing for wells edition) including 11960:2004 edition) + COR1:2007 (in ISO 11960:2001 IDT (ISO 11960:2004 11960-2004 IDT)
COR1:2006 (in revision WI 232) MOD) Steel pipes
revision) for use as casing
or tubing for wells
in PNGI. General
specifications
PNGI – Steel pipes for use as drill pipe – ISO 11961:2008 + API Spec 5DP 1st ed/ISO EN ISO 11961:2008 (2nd GOST R (11961:2008 ST RK 11961-2009 (ISO
Specification COR 1: 2009 11961:2008 ed.) + COR1: 2009 MOD) Steel drill 11960-2008 IDT)
pipes for PNGI.
Specifications
PNGI – Drilling fluid materials – ISO 13500:2008 API Spec 13A 17th ed/ISO EN ISO 13500:2008 (2nd GB/T 5005-2001 ST RK 1261-2004 (ISO
Specification and tests + COR1: 2009 (2nd 13500:2006 (IDT) edition) (COR 1:2009) ISO 13500: 1998 13500:1998, NEQ)
edition) MOD GSO
ISO 13500:2008
(to be updated to
include Cor1)
PNGI – Drilling fluids – Processing systems ISO 13501:2005 API RP 13C (National EN ISO 13501:2005
evaluation Adoption under
committee consideration)
PNGI – Completion fluids and materials – ISO 13503-1:2003 + API RP 13M 1st ed/ISO EN ISO 13503-1:2005 + ST RK ISO 13503-1: 2009
Part 1: Measurement of viscous properties COR1:2005 13503-1:2003 (IDT) COR 1: 2007 (in revision (ISO 13503-1:2003 IDT)
of completion fluids WI 264)
ISO title ISO ABNT – Brazil API – USA CEN – Europe DSTU – Ukraine GB – China GOST R – Russia GSO – Gulf ST RK – Kazakhstan
PNGI – Completion fluids and materials ISO 13503-2:2006 + ABNT NBR ISO 13503- API RP 19C 1 ed/ISO
st
EN ISO 13503-2: 2006 GSO ISO 13503-2:2008 ST RK ISO 13503-2: 2009
– Part 2: Measurement of properties of Amdt 1/2009 2:2008 In validity 13503-2:2006 (IDT) + Amdt 1: 2009 (in (to include Amend 1) (ISO 13503-2:2006 IDT)
proppants used in hydraulic fracturing and – Amendement 1 to be revision)
gravel packing operations initiated
PNGI – Completion fluids and materials – ISO 13503-3:2005 +. API RP 13J 4th ed/ISO EN ISO 13503-3:2005 + ST RK ISO 13503-3:
Part 3:Testing of heavy brines Cor 1: 2006 13503-3:2005 COR1: 2007 2009 (ISO 13503-
3:2005 IDT)
PNGI – Completion fluids and materials ISO 13503-4:2006 API RP 13M-4 1st ed/ISO EN ISO 13503-4:2006 GSO ISO 13503-4:2008 ST RK ISO 13503-4:
– Part 4:Procedures for measuring 13503-4:2006 (IDT) 2009 (ISO 13503-4:
stimulation and gravel-pack fluid leak-off 2006 IDT)
under static conditions
PNGI – Completion fluids and materials – ISO 13503-5:2006 API RP 19D 1st ed/ISO EN ISO 13503-5:2006 GSO ISO 13503-5:2008 ST RK ISO 13503-5: 2009
Part 5:Procedure for measuring the long (in revision) 13503-5:2006 (IDT) (ISO 13503-5:2006 IDT)
term conductivity of propants
PNGI – Drilling and production equipment ISO 13533:2001 API Spec16A 3rd ed/ISO EN ISO 13533:2001 GB/T 20174-2006 GOST R ISO ST RK ISO 13533:2004
– Drill through equipment +. COR 1: 2005 13533:2001 (MOD) + incl. Corrig. 1: 2006 ISO 13533:2001 13533:2009 (ISO 13533:2001 IDT)
(confirmed) ERR 2005 (confirmed) MOD
PNGI – Drilling and production equipment ISO 13534:2000 API RP 8B 7th ed/ISO EN ISO 13534:2000 (in DSTU ISO 13534 (IDT) GB/T 19832-2005 GOST R ISO 13534: ST RK 13534:2004 (ISO
– Inspection, maintenance, repair and (in revision) 13534:2000 (MOD) revision – WI 186) Plan for 2008 ISO 13534:2000 IDT 2009 13534:2000 IDT)
remanufacture of hoisting equipment +Add1 2003 + Add2
©OGP
2005
PNGI – Drilling and production equipment ISO 13535:2000 API Spec 8C 4th ed/ISO EN ISO 13535:2000 (in DSTU ISO 13535 (IDT) GB/T 19190-2003 GOST R ISO 13535 ST RK 1263-2004 (ISO
– Hoisting equipment (in revision) 13535:2000 (MOD) + revision – WI 187) Plan for 2008 ISO 13535:2000 IDT confirmed GOST R 13535:2000, NEQ)
Add1 2003 + Add 2 2005 53683;2009
PNGI – Pipeline transportation systems ISO 13623:2009 EN 14161:2003 (ISO GB/T 24259-2009
13623:2000 MOD) (in ISO 13623:2000
revision WI 217) MOD GSO
ISO 13623:2008
PNGI – Drilling and production equipment ISO 13624-1:2009 EN ISO 13624-1: 2009
– Part 1: Design and operation of marine
drilling riser equipment
PNGI – Drilling and production equipment ISO TR 13624-2:2009
– Part 2: Deepwater drilling riser
PPNGI – Centrifugal pumps ISO 13709:2009 API Std 610 10 th ed/ISO EN ISO 13709:2009 DSTU ISO 13709 (IDT) ST RK ISO 13709:2004
13709:2003 Plan for 2008 (ISO 13707:2003 IDT)
PPNGI – Reciprocating positive ISO 13710:2004 EN ISO 13710:2004 ST RK ISO 13710:2006
displacement pumps (ISO 13710:2004 IDT)
PNGI – Pipeline transportation systems – ISO 13847:2000 EN 14163:2001 (ISO GSO ISO 13847:2008
Welding of pipeline + COR 1: 2001 (in 13847:2000 modified) +
revision) COR1:2006 (in revision
WI 222)
PNGI – Content and drafting of a functional ISO 13879: 1999 GB/T 24257-2009 GSO ISO 13879:2008 ST RK 13879:2004 (ISO
specification ISO 13879:1999 13879:1999 IDT)
MOD
PNGI – Content and drafting of a technical ISO 13880: 1999 GB/T 24258-2009 GSO ISO 13880:2008 ST RK 13880:2004 (ISO
specification ISO 13880:1999 13880:1999 IDT)
equipment 14693:2003 (MOD) ISO 14693:2003 confirmed GOST R (ISO 14693:2003 IDT)
MOD 53680;2009
PNGI – Pipeline Transportation Systems – ISO 14723:2009 API Spec 6DSS 1st ed/ISO EN ISO 14723:2009 (2nd GSO ISO 14723:2008 ST RK ISO 14723:2006
Subsea pipeline valves 14723:2001 (MOD) edition) (ISO 14723:2001 IDT)
PNGI – Downhole equipment – Progressing ISO 15136-1:2009 API Std 11D2 (project) EN ISO 15136-1:2009 DSTU ISO 15136-1 (IDT) GB/T 21411.1-2008 ST RK 1254-1-2004 (ISO
cavity pump systems for artificial lift – Part Plan for 2008 ISO 15136-1:2001 15136-1:2001, MOD)
1: Pumps MOD
PNGI – Progressing cavity pump systems ISO 15136-2: 2006 ABNT NBR ISO 15136- API Std 11D3 1st ed/ISO EN ISO 15136-2:2006 GB/T 21411.2-2009
for artificial lift – Part 2: Surface-drive 2:2008 In validity 15136-2:2006 (IDT) ISO 15136-2: 2006
systems MOD
PNGI – Offshore production installations – ISO 15138:2007 (2nd EN ISO 15138:2007 (2nd ST RK 15138:2006 (ISO
Heating, ventilation and air-conditioning edition) edition) 15138:2000 IDT)
PNGI – Materials for use in H2S containing ISO 15156-1:2009 NACE MR 0175/ISO EN ISO 15156-1:2009 (2nd GB/T 20972.1-2007 GOST R ISO 15156-1 GSO ISO 15156:1:2008 ST RK ISO 15156-1: 2008
environments in oil and gas production – 15156-1:2001 edition) ISO 15156-1:2001 (in ballot) (under revision) (ISO 15156-1: 2001 IDT)
Part 1:General principles for selection of IDT
cracking-resistant materials
PNGI – Materials for use in H2S containing ISO 15156-2:2009 NACE MR 0175/ ISO EN ISO 15156-2:2009 (2nd GB/T 20972.2-2008 GOST R ISO 15156-2 GSO ISO 15156:2:2008 ST RK ISO 15156-2: 2008
environments in oil & gas production – Part 15156-2:2003 edition) ISO 15156-2:2003 (in ballot) (under reviosn) (ISO 15156-2: 2003 IDT)
2: Cracking resistant carbon and low alloy MOD
steels, and the use of cast irons
ISO title ISO ABNT – Brazil API – USA CEN – Europe DSTU – Ukraine GB – China GOST R – Russia GSO – Gulf ST RK – Kazakhstan
PNGI – Materials for use in H2S containing ISO 15156-3:2009 NACE MR 0175/ISO EN ISO 15156-3: 2009 GB/T 20972.3-2008 GSO ISO 15156:3:2008 ST RK ISO 15156-3: 2008
environments in oil & gas production – Part 15156-2:2003 (2nd edition) ISO 15156-3:2003 (under revision) (ISO 15156-3:2003 IDT)
3: Cracking resistant CRAs (corrosion- MOD
resistant-alloys) and other alloys
PNGI – Field inspection of new casing, ISO 15463:2003 + API RP 5A5 7th ed/ISO EN ISO 15463:2003 + GB/T 20656-2006 ST RK 15463:2006 (ISO
tubing and plain end drill pipe COR 1: 2009 15463:2003 COR1: 2009 ISO 15463:2003 IDT 15463:2003 IDT)
PNGI – Offshore production installations ISO 15544:2000 + EN ISO 15544: 2010 (ISO ST RK 15544:2006 (ISO
– Requirements and guidelines for Amdt1: 2009 15544: 2000 + Amdt 15544: 2000 IDT)
emergency response 1: 2009
PNGI – Aluminium alloy drill pipes ISO 15546:2007 (2nd EN ISO 15546:2007 DSTU ISO 15546 (IDT) GB/T 20659-2006 GOST R ISO 15546
edition) (in revision) (2nd edition) (in revision Plan for 2008 ISO 15546:2002 IDT Plan 2009
WI 247)
PNGI – Plate-type heat exchangers – Part ISO 15547-1:2005 API Std 662 part 1 1st ed/ EN ISO 15547-1:2005 GOST R ISO 15547-1 ST RK 15547:2004 (ISO
1: Plate-and-frame heat exchangers (2nd edition) ISO 15547-1:2005 (IDT) confirmed GOST R ISO 15547:2000 IDT)
15547-1;2009
PNGI – Plate-type heat exchangers – ISO 15547-2:2005 API Std 662 part 2 1st ed/ EN ISO 15547-2:2005
Part 2: Brazed aluminium plate-fin heat (2nd edition) ISO 15547-2:2005 (IDT)
exchangers
PNGI – Cathodic protection forpipeline ISO 15589-1: 2003 taken in CEN TC219 GB/T 21448-2008 GSO ISO 15589-1:2008 in 2010 plan
©OGP
PNGI – Drilling and production equipment ISO 17078-2:2007 + (National Adoption under EN ISO 17078-2:2007
– Part 2: Flow-control devices for side- COR 1:2009 committee consideration) (COR 1:2009)
pocket mandrels as API Spec 19G2
PNGI – Drilling and production equipment ISO 17078-3:2009 Likely adopted as API EN ISO 17078-3:2009
– Part 3: Latches and related tools for standard (API RP 19G3)
side-pocket mandrels
Metal ball valves for petroleum, ISO 17292:2004 EN ISO 17292:2004 CEN DSTU ISO 17292 (IDT) GB/T 12237-2007
petrochemical and allied industries TC69 Plan for 2008 ISO 17292:2004
NEQ
PNGI – Offshore production installations ISO 17776:2000 EN ISO 17776:2002 ST RK ISO 17776:2004
– Guidelines on tools and techniques for (ISO 17776:2000 IDT)
hazard identification and risk assessment
PNGI – Downhole equipment – Sand ISO 17824: 2009
screens
PNGI – Performance testing of cementing ISO 18135:2001
float equipment
PNGI – General requirements for offshore ISO 19900:2002 ABNT NBR ISO (National Adoption under EN ISO 19900:2002 GB/T 23511-2009 GOST R ISO 19900 (in GSO ISO 19900:2008 ST RK ISO 19900:2006
structures 19900:2004 In validity committee consideration) ISO 19900:2002 IDT ballot) (ISO 19900:2002 IDT)
PNGI –Specific requirements for offshore ISO 19901-1:2005 (National Adoption under EN ISO 19901-1:2005 In 2010 plan
structures Part 1: Metocean design and committee consideration)
operating considerations
ISO title ISO ABNT – Brazil API – USA CEN – Europe DSTU – Ukraine GB – China GOST R – Russia GSO – Gulf ST RK – Kazakhstan
PNGI – Specific requirements for offshore ISO 19901-2:2004 (National Adoption under EN ISO 19901-2:2004 ST RK ISO 19901-2: 2006
structures Part 2: Seismic design procedures committee consideration) (ISO 19901-2:2004 IDT)
and criteria
PNGI – Specific requirements for offshore ISO 19901-4:2003 (National Adoption under EN ISO 19901-4:2003 ST RK ISO 19901-4: 2006
structures Part 4: Geotechnical and committee consideration) (ISO 19901-4:2003 IDT)
foundation design considerations
PNGI –Specific requirements for offshore ISO 19901-5:2003 ABNT NBR ISO 19901- (National Adoption under EN ISO 19901-5:2003 ST RK ISO 19901-5: 2006
structures Part 5: weight control during 5:2004 In validity committee consideration) (ISO 19901-5:2003 IDT)
engineering and construction
PNGI –Specific requirements for offshore ISO 19901-6:2009 EN ISO 19901-6: 2009
structures Part 6: Marine operations
PNGI –Specific requirements for offshore ISO 19901-7:2005 (National Adoption under EN ISO 19901-7:2005 (in ST RK ISO 19901-7: 2006
structures Part 7: Stationkeeping systems (in revision) committee consideration) revision WI 229) (ISO 19901-7:2005 IDT)
for floating offshore structures and mobile
offshore units
PNGI – Fixed steel offshore structures ISO 19902:2007 (National Adoption under EN ISO 19902:2007
committee consideration)
PNGI – Fixed concrete offshore structures ISO 19903:2006 (National Adoption under EN ISO 19903:2006
committee consideration)
©OGP
PNGI – Floating offshore structures – Part ISO 19904-1:2006 API RP 2FPS 2nd ed. EN ISO 19904-1:2006
1: Monohulls, semi-submersibles and spars (National Adoption under
committee consideration)
PNGI – Production assurance and reliability ISO 20815:2008 (in EN ISO 20815:2008 (in GOST R ISO 20815
management revision) revision WI 259) Plan 2009
Pumps – Shaft sealing systems for ISO 21049:2004 (in API Std 682 3rd ed/ISO EN ISO 21049:2004 (in
centrifugal and rotary pumps revision) 21049:2004 revision WI 228)
PNGI –Pipeline transportation systems – ISO 21329:2004 EN ISO 21329:2004 GSO ISO 21329:2008 ST RK ISO 21329:2007
Test procedure for mechanical connectors (ISO 21329:2004 IDT)
PNGI – External coatings for buried and ISO 21809-2:2007 + (National Adoption under EN ISO 21809-2:2007
submerged pipelines used in pipeline COR1: 2008 committee consideration) ECISS/TC110 WG4
transportation systems – Part 2: Fusion
bonded epoxy coatings
www.ogp.org.uk
209-215 Blackfriars Road
London SE1 8NL
United Kingdom
Telephone: +44 (0)20 7633 0272
Fax: +44 (0)20 7633 2350
165 Bd du Souverain
4th Floor
B-1160 Brussels, Belgium
Telephone: +32 (0)2 566 9150
Fax: +32 (0)2 566 9159