In the following circuit, assume that A = y = 0, Vop =3 V, Vimy = |Vrip| = 0.5, HaCox =
200 HA/V?, [pCox = 100 A/V?. Furthermore, assume that Vin is a small-signal source
and Vbias| = 1.5 V and the DC level of Vout: and Vou are all equal to 1.5 V and 0.5 V
respectively. Also, assume that the bias current of ML is twice that of Mo. |
a. What is the region of operation of Mi and Mz?
b. If the overall power consumption is 3 mW, find Ri, Re, (W/L), and (W/L).
c. What is the overall gain of the system i.e. Vou/Vin?The small — signal resistance (i.e. dVs/dip) in kQ offered by the n-channel MOSFET
M shown in the Fig. below, at a bias point of Vs — 2 V is (device data for M: device
transconductance parameter ky = tiyCoy” = 404,
threshold voltage Vi = 1 V,
and neglect body effect and channel length modulation effects). |
Ve
‘elDesign a Common Source Amplifier with a current source load for the following
specifications.
Vpn = 3 V, Power Consumption = 1.5 mW, Peak to Peak output signal swing of 2.5 V,
Absolute value of Voltage gain is 40, L = 0.4 um for all the devices. Assume the
nominal DC level of the output voltage is 1.5 V. The technology parameters are: A(xios)
= 0.1 V1, Aemos) = 0.1 V4, y= 0, Von = 3 V, Vran = |Vrap| = 0.5, pnCox = 200 pA/V?,
HpCex = 100 A/V. Find Voias, DC level of the input, the transistor widths (i.e. W1 and
W2), and the gain of the circuit.In the source follower circuit shown in Fig. below, Mz serves as a current source. The
circuit must operate with a power budget of 3 mW, a voltage gain of 0.9, and a minimum
allowable output of 0.3 V (i.e. Mz must remain in saturation if Vps2 > 0.3 V). Assuming
the MOS device parameters p1,Cox = 200 WA/V?, Vr = 0.4 V and A= 0.1 V7.The degenerated CS stage shown in Fig. below, must provide a voltage gain of 4 with
a bias current of 1 mA. Assume a drop of 200 mV across RS and ) = 0. The MOS
device parameters p1,,C,, = 200 WA/V, Vrn = 0.4 V.
a. IfRp =1 kQ, determine the required value of (W/L). Does the transistor operate in
Saturation region for this choice of (W/L),
b. If(W/L)=50/ 0.18, determine the required value of Rn. Does the transistor operate
in Saturation region for this choice of Rp.
Vpp=1.8V
=Rp
Vout
Vino,
i"