Professional Documents
Culture Documents
AnyCast Repair Tool Guide
AnyCast Repair Tool Guide
the file.
file.
Step 2. Disassemble your AnyCast:
Please open the case carefully from the parting line on the side of dongle.
Step 3. Enter download mode:
Please make sure you have installed our update tool on your PC.
Plug micro USB connector of the USB cable into your AnyCast dongle.
Use paper pin to short pin 7 and pin 8 (count the pin number from
bottom up) of the NAND Flash memory. Keep 2 pins shorted and plug
will pop up to guide you through USB driver installation process. Now
progress.