Professional Documents
Culture Documents
Fastening Solutions
Fastening Systems Engineered
Engineered for
for Performance
Performance
TM
Optisert ®
Sherex performs rigorous testing on all its fastening products so end users can
be confident in their performance.
SPIN OUT
Rivet nuts were installed with the Sherex FLEX-5P tool, calibrated with the use of the Sherex Hand Tool
Calibration unit, into supplied material types and thicknesses (6061-T6 aluminum, GPO-3 fiberglass, and
G10-FR4 fiberglass), as well as using Sherex’s recommended installation force settings on the FLEX-5P for
each of the three thread sizes installed.
Test plates with installed rivet nuts were clamped to prevent any movement during testing.
The results are an average of the three materials.
Sherex Flex-5P
Hand Tool Calibration Unit
Sherex offers a wide range of products that help companies assembly products
more efficiently, from fasteners to the installation tools used to install them, to
vibration loosening prevention to help joints stay secure.
Bolt or Screw
WHY BLIND RIVET NUTS? Roof Rack Attachment
Attached
Component
Sherex blind rivet nuts provide load bearing threads
S in thin sheet materials that are too thin for a tapped
Rivet Nut
Base Material
d fast attachment
Sherex full hex rivet nuts provide increased spin BLIND
when anRIVET NUTS
application has little
Sherexoffullcomponents
hex in nuts
rivet off center
provide increased spin out out over
resistance resistance over round or half hex body styles.
HALF HEX RIVET NUTS and custom rivet nuts, and th
plications. RIV-FLOAT® Accounts for tolerance These products are compatible with Class 8, Grade
ack up in jointround
design or
andhalf hex body
misalignment styles.
during the These products are compatible with and
5 hardware, Sherex half hexin rivet
are available sizes nuts
1/4-20offers
to a semi hex Sherex
body forblind rivet nuts provid
excellent
ClassRIV-FLOAT
rvice of the joint. 8, Grade®
5 hardware,
-SHORT and are available in sizes 1/4-20 1/2-13
is available to 1/2-and M6 to M12 in small flange and large when an application
spin out resistance over round body styles. Available in sealed RIV
has little
r applications13requiring
and M6 backside
to M12clearance
in smallsimilar
flange and large flange styles. flange styles.
that of various riveted nut plates and cage nuts. and custom
head or closed end designs, and are steel, stainless, and rivet nuts, and the
RIV-F
aluminum materials. and f
NAS AND MS RIVET NUTS
OPTISERT
ARGE SIZE RIVET NUTS
RIVET NUTS
®
RIV-
applic
Sherex NAS and MS rivet nuts are ideal
® for aerospace stack
Optisert® is Sherex's best performing round RIV-FLOAT RIVET NUTS servic
herex Large Size rivet nuts are offered in sizes from and defense applications that require NAS 1329, RIV-FL
rivetThese
4 -10 and M16. nut.rivet
Itsnuts
combination
were developedof knurled body design and underhead
NAS 1330, andRIV-FLOAT ®
rivet nuts
MS27130 standards. provide
All styles are easy, accurate, and fast attachment for ap
and fa
r applicationswedges givesjointit performance
where critical superior astrength, performance, and spin-out
manufactured of in our AS9100-certified Akron, Ohio
components in off-center applications. RIV-FLOAT®-SHORT rivet to tha
applic
d high tensileresistance facility,forand are available in steel, aluminum, 430
over typical round body rivet nuts. Ideal applications
loads are required.
stainless steel,nuts providesteel,
316 stainless the alloy
same benefits
steel, and with a shorter body for increased stack u
Optisert include use in softer material like aluminum, composite, brass. Cage Codes back-side clearance.
7EK30 & 4JQL4. LAR
service
fiberglass, and plastic. for app
toShere
that
LARGE
IVET NUT SIZE RIVET
INSTALLATION NUTS
TOOLS IN-DIE AUTOMATION 3/4 -1
for ap
LAR
Sherex large size rivet nuts are offered from 1/2-13 through 3/4-10, and M12 to M16®sizes. These rivet nuts were
herex offers a broad line of installation tools, from Sherex, with our partner, Autoriv , offers custom- nd hig
nd tools idealdeveloped forand
for prototyping applications
small volumeswhere
to critical joint performance and high tensile
engineered fastenerloads are required.
automation equipment for
dro-pneumatic tools ideal for large production runs. specific budgets and performance requirements. Sherex
FASTENER INSTALLATION SYSTEMS 3/4 -1
Sherex offers a broad line of installation tools, from hand tools ideal for prototyping and small volumes to hydro-pneumatic, process for ap
LINCH NUTS BRASS INSERTS
monitoring, and robotic installation systems ideal for large production runs. RIV
nd hig
herex offers several varieties of clinch nuts, ideal Sherex brass inserts are ideal for fastening in plastics,
r fastening in high strength steels where access to as they provide a threadedhold when the base Shere
th sides of the base material is available that have material is not strong enough to support a thread. hand
ass 10 nut strength requirements. hydro
RIVE
COMPRESSION LIMITERS
mpression limiters are ideal for use in plastics, as they protect the base material from cracking due to compressive loads generated when
CLIN
Sherex
DLHT Hand Tool SSG Spin-Spin Tool FLEX-5 Spin-Pull Tool FLEX-18 Spin-Pull Tool
htening bolts. Sherex compression limiters are custom engineered for specific applications.
Calibration Unit Process Monitoring Automated Systems hand t
Shere
hydro-
for fas
VIBRATIONAL LOOSENING PREVENTION both s
TEC Series® washers and Disc-Lock® washers and nuts are heavy duty, class
reusable, self locking fasteners designed to secure safety-critical WEDGE LOCKING WASHERS
applications CLIN
against vibrational loosening.
WEDGE LOCKING Disc-Lock’sNUTSM22 Safety Wheel Nut is used by many trucking fleets
Disc-Lock wedge locking washers are heavy duty,
and thewashers designed to secure safety-
self-locking
Sherex
Department of Defense. for fas
sc-Lock wedge locking nuts are patented, heavy critical applications against vibrational loosening. Comp
Available in standard and large both
tightes
uty, self-locking nuts designed to maintain joint outer diameter carbon and stainless
Ideal steel M3-
for situations where resusability is not
tegrity in highM72, #5-3”.
vibration applications. Available in required. Manufactured using scrapless cold-forming class 1
zes from M10 to M22, 3/8” to 7/8”. technology. Available in carbon steel sizes M3-M38,
#6-1 1/2” and in stainless
Sherex Fastening Solutions • info@sherex.com steel sizes M6-M24, 1/4”-
• 866-474-3739 • www.sherex.com
AS9100 • ISO 9001:2015 • IATF 16949:2016 Certified
Compr
HEADQUARTERS:
SHEREX FASTENING SOLUTIONS, LLC
400 Riverwalk Pkwy, Suite 600
Tonawanda, NY 14150
Phone: 866-474-3739
Fax: 716-875-0358
E-mail: info@sherex.com
www.sherex.com
PRODUCTION FACILITIES: GLOBAL SALES AND DISTRIBUTION OFFICES:
SHEREX AKRON SHEREX MEXICO S. DE R.L. DE C.V.
850 Moe Drive Circuito Balvanera 5A Bodega 11
Akron, OH 44310 Parque Industrial Balvanera
Phone: 330-630-2293 Corregidora, Queretaro
Fax: 716-875-0358 C.P. 76900 Mexico
Email: sales@sherex.com Phone: +52 (442) 196-8354
Email: sales@sherexmexico.com
SHEREX TAIWAN
SHEREX UK
No. 201, Sandong Road
Empire Business Park, Unit 14 Enterprise Way
Chungli City
Burnley, BB12 6LT, United Kingdom
Taoyuan District, Taiwan 32053
Phone: +44 (0)1282 227164
Phone: +886 3-498-8689
Email: uksales@sherex.com
Fax: +886 3-498-3543
Email: sales@sherex.com.tw SHEREX POLAND SP. Z O. O
al. Krakowska 106, 02-256
Warsaw, Poland
NIP: 5213908996
Tel.: +48 22 580 19 60
Email: sales@sherex.pl