15 CEMENT
Specitications of Portiand cement BS 12 oc ASTM C-150 BDS 232 1998 BDS 612 BNRC 2.47, 521
1308 232 or its equivalent must confonm lo the following requirements.
- Water for normal consistency 6th - 39%
+ Fineness. + 280 Sq.ma/Kg. (By Air permeability method)
a) Initial setting time + Not less than 45 mins,
b) Final setting time ict more than 8 hours
~ Compressive strength (standard mortar Cube Osun size)
9) 3 days =13MN/sq.m. (1800 Psi)
b) 7aays = 19 MN/Sq. (2300 Psi}
ab days =29MN/Sqm (4000 Psi)
- Tensile strength (standard mortar briquette)
a) 3deys 1.00 MN/Sqm. (150s)
b)Pdays =19MN/Sqm @75Psi)
1) 28 days. = 24MN/Sqin. Gs0Psi)
16 = SAND
Should conform 4
= Organic materials content shall not exceed 5%
+ Sill and other fine materials content shall sot execed. 6%
- the grading shall be within the range
Seve Ne [Noni]. 50 No 69 No. 100
% Poasing 300-52 AD. a7 050 6
= the fineness modulus of sand shal be =
1a the following requirements and BDS 243 : 1963, ASTMC 40-92, C 87-89 (1590)
Mirun PM.
Concrete 18
Mortar 15
Filling sand 06
Type of work.
7 AGGREGATE (COARSE AGGREGATH)
7A Khoa (Brick chips)
Khoa made from bricks shall conform to the following requivements
tt must be made of firet class and picked jhamma bricks.
= Nominal size : The grading shall be within the following limits (for 19mm down graded).
Tuafswve [tam | omm_ [Nod [Noe
*Passing | 95100 [2585 | cig 8
“opearance . shall be-complctely non plastic and chall be completely free fcom all organic and
ewiut deleterious materials.
+ Unit weight : unit weight shell not be less than 1200 kg/cu.m.
+ Water absorption : ». percentage of the dry weight shall not exceed 14%,
—_——
105
pier