Professional Documents
Culture Documents
Exterior Coating Test Report - Grey Metallic
Exterior Coating Test Report - Grey Metallic
1. Coating thickness:
Procedure: The coating thickness shall be measured on the base of the utensil at five points equally spaced along a
line running from the centre to the perimeter
Requirement: As per supplier TDS
Result: Pass
Remarks: Meet the requirement
2.MEK Rub test
*Rubbing the surface of a baked film with cheesecloth soaked with MEK.The rubs are counted as a double rub
(one rub forward and one rub backward constitutes a double rub).
Requirement: At a minimum, 25 double rubs should not break through the coating.
Result: Pass
Remarks: Aluminium surface is not visible but Slightly paint is sticking to the cotton
Result: Pass
Remarks: No colour change
5.Resist to fire
*Dry heat the Cookware on gas Stove @ 200° C for 10 mins
Result: Pass
Remarks: No Color Change
1. Results are found Satisfactory
Observations
Tested by Approved by
Chaithra Mallesh