Professional Documents
Culture Documents
Product Description
Medium Mooney, oil extended, semi-crystalline EPDM with a high ENB content
Producing Site
Geleen, The Netherlands
Bale weight 25 kg -
Shelf life time 36 months After production date, under specified conditions,
see for more detail: ‘product storage’
Packaging
Each bale is individually wrapped in a 50 micron transparant LDPE film. The melting point of the film is ≤ 110 ºC (DSC). Bales are
packed in a corrugated cardboard box (net box weight = 900 kg). More detailed information about the product packaging can be
found at https://connect.keltan.com.
Identification
The bales are marked with the Keltan® Grade name, printed on the film wrap.
The boxes are marked with the producer name and address, product name, lot number, net weight and the production date. All boxes
are marked with a unique 20-digit code (Stock Unit Number) for traceability.
Product safety
Detailed product safety data can be found in the 'Keltan® EP(D)M Material Safety Data Sheet' which is available on
www.keltan.com.
Product storage
The product should be stored dry and at temperature < 30 °C. Exposure to light has to be avoided. More detailed information
regarding the storage of Keltan® EP(D)M can be found in the 'Keltan® EP(D)M Handling & Storage guidelines' which is available on
https://connect.keltan.com.
Page 1 of 2: This document contains important information and must be read in its entirety.
Keltan® 4869C
General Sales Specification
Certificate of Analysis
For each delivery a Certificate of Analysis (CoA) will be sent. The Certificate of Analysis contains the actual measured values of the
specified product characteristics for each batch.
Validity date
This specification is valid until the next update.
Version date
This document was issued at August 24, 2016 and replaces earlier versions.
ARLANXEO
M.P. van Boggelen
Global Product & Quality Manager
Disclaimer
The information and our technical advice - whether verbal, in writing or by way of trials - is given in good faith but without warranty,
and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to
check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and
processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and,
therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of
Sale and Delivery.
Page 2 of 2: This document contains important information and must be read in its entirety.