Professional Documents
Culture Documents
1
DCSIM Damage Control Simulator
Being mainly focused in naval programs, Meteksan developed the Damage Control (DC) Simulator
to provide a valuable asset for Navies for best practice. Meteksan’s aim is to contribute to naval
damage control training being well aware that the actions of a well-trained crew can lead to survival
in an emergency at sea.
Meteksan’s DC Simulator (DCSIM) ensures a realistic training environment to develop and conduct
damage control exercises as part of damage control readiness and the internationally recognized
commercial and naval standards. Its unique features are increasing the effectiveness of the training,
operational efficiency and maintainability so that you can;
• Train the crew in their real environment (smoke, flooding, rolling etc.) for damage control
• Plan, execute and evaluate different scenarios under different conditions
• Improve the crew’s damage control, communication and reporting abilities through live trainings
• Measure and decrease their response time under heavy (smoke, flooding, rolling etc.) conditions
• Evaluate their individual and team performances under different live training scenarios, including adjustable
hull motion for speed and angle and adjustable water level
• Observe, record and replay trainings through the CCTV system
• Overview their previous performances to plan their next training period and to compare results
• Perform preventative maintenance by recording the usage time of critical components through the
automation system and timely warning to the user for related maintenance
• Perform easy fault-finding system by pin-pointing the faulty components; detects and indicates errors up to
the Line Replaceable Unit level with BITE capability.
2
DCSIM Damage Control Simulator
Damage Control Simulator (DCSIM) provides a realistic training environment to develop and conduct damage
control exercises to provide the shipboard personnel as part of damage control readiness and the internationally
recognized commercial and naval standards. DCSIM has unique features that are increasing the effectiveness
of the training, operational efficiency and maintainability. The system provides standardized means to train the
crew from basic up to advanced level with proper and comparable evaluation reports.
It is possible to configure the number of damages and their types. One of the important properties of our
system is the rolling effect. Damage Control Simulator has 15 degrees rolling with its hydraulic feet to provide
sea effect.
3
Key Characteristics
The simulator resembles part of a warship, and is composed of the hull, motion,
water distribution and control systems. All of the main features of the simulator are
controlled by the Simulator Control System. The properties of the training vessel can
be summarized as follows:
1 2
plus five instructors to execute the training
(rolling of the ship) at sea being able to roll up
in line with the scenarios. The simulator
to 15 degrees with full load and without any
software provides the means for the
restrictions, and can be stopped in a fixed
preparation of additional scenario(s) by the
manner without any restriction at any angle.
user.
3
simulations related to the missile holes,
damaged piping / flanges, and sheet tearing
with the related pressure of the hole and the
proportional water flow amount.
4 5
sound effect system to resemble sounds like outage of electric power is simulated
by using casualty power cable and
the firing, airplane / helicopter, and explosion
connections. There are also light strobes
sounds during the training sessions.
and light effects to enhance the simulation
of explosion, detonation and fire.
6
the compartments for wet training; shoring, driving
a quoin and a wedge, hat patch implementation.
Water draining techniques, repair of damaged pipe
/ flange circuit, smoke exhausting techniques,
wet and the soft patch application, plotting,
communication and standard reporting.
4
DCSIM Damage Control Simulator
General Layout
The platform has two decks to host the wet training areas like the diesel
generator room, mess deck / room, galley, pump room. Including an open
deck, there are also local control rooms, a bridge / damage control center
and passageways.
5
Control System
The control system permits the operator to select training exercises from
an established program of lessons, to develop new ones, to initiate and
monitor training exercises and to monitor all simulator conditions and
systems.
The real-time PLC-based control system with user friendly interface software is used for fresh
and clean water supply and distribution to training objects like simulation of damages, splits etc.
with the correct pressure and flow. The system controls flow, pressure and relative valve(s) of the
selectable damages, according to the scenario.
After the selection of the scenario (selection of the training / damage) the related valves are
automatically opened to simulate flooding as a requirement of the scenario. The Control System
handles also motion control, ventilation, smoke generation, water treatment, lighting as well as
water supply and safety.
6
DCSIM Damage Control Simulator
Safety Features
The total equipment is built in accordance with the current international safety
directives, the Regulations for Prevention of Accidents. Safety switches are
available for use in case of an emergency in the command & control room, in
the damage control room, and in the trainer’s observation room.
When any of the manual safety switches are activated, training terminates, the simulator reaches
its start-up position safely and smoothly, and the water and the smoke are discharged.
The system / devices are designed not to fail because of operator mistakes. In these cases, the
operators are warned and the process is not carried out. The devices / units are easily accessible
for maintenance. The materials used in the construction of the simulators and the residuals after
the use of the simulators are not harmful for the environment or human health.
There are a wide range of equipment and instruments in the system for both safety reasons and
control issues;
• Level transmitters
• Temperature sensors
• Control and discharge valves
• Pressure switches
• Emergency shutdown system
• Day/night cameras with infrared spots
• PA system
7
Training Evaluation System
The main components are mobile evaluation panels, PLC-controlled data
collection and evaluation software. There are two sources of evaluation;
8
DCSIM Damage Control Simulator
Meteksan Savunma’s training vessel based on the above outlined capabilities provides a
realistic training environment that prepares members of repair party teams to react more
efficiently and effectively to actual casualties. Our DCSIM’s are successfully in service in five
different countries. We continue proudly to serve the naval community and to train the crew
of vessels as part of sea-readiness.
9
Meteksan can provide turn key solutions, in all stages of product life cycle of Platform
Simulators, even including related construction works, up to facility management.
We support you wherever you are in the product lifecycle by exploiting new technology,
developing concepts into workable prototypes and small-batch production, and then
integrating systems and equipment before supporting them through-life. All of this is
underpinned by our commitment to quality, to assuring your information and to acting
responsibly and ethically.
10
DCSIM Damage Control Simulator
Contact Us
Cyberpark F Blok Beytepe Lodumlu Köyü Yolu No: 85/ABilkent-Çankaya 06800
ANKARA/TÜRKİYE
info@meteksan.com | sales@meteksan.com
/meteksansavunma
11
12