Professional Documents
Culture Documents
Palera1n Jailbreak For iOS 15 - iOS 16
Palera1n Jailbreak For iOS 15 - iOS 16
Palera1n is the first public iOS 15 – iOS 16 semi-tethered checkm8 “jailbreak”. This
is an early release, and using it on your main iPhone is not recommended. As for
now, Palera1n Jailbreak offers the tweak injection feature, installing Substitute on
iOS.
What is Palera1n?
Palera1n Jailbreak is a script for macOS and Linux, allowing you to execute iOS 15.0 – iOS 16
checkm8 exploit on compatible iDevices. It boots the device with AMFI patches and requires
you to install Pogo by Amy through the TrollStore app to access the Sileo package manager.
It is brought to you by Nebula, the developer behind the appreciated IPA Permasigner terminal
app, the first open-source solution to install IPA files without revokes on iOS 14.0 up to iOS TRENDING CATEGORIES
14.8.1, and iOS 15.0 up to iOS 15.4.1 using the CoreTrust bypass discovered by Linus Henze.
Streamer
DolphiniOS
Play!
3uTools
Palera1n Jailbreak is a work in progress, and the installation process isn't as user-friendly as
other jailbreaks. To install the semi-tethered iOS 15 jailbreak, it's required to make some
iPogo
preparation first and use a computer. Using this tool is recommended only for advanced users!
Lynx 2
FEATURED
XinaA15 Jailbreak
Palera1n Jailbreak
WinRa1n Jailbreak
checkra1n Jailbreak
unc0ver Jailbreak
Fugu15 Jailbreak
Palera1n Windows
Chimera Jailbreak
Taurine Jailbreak
Palera1n should work for most devices supported by checkra1n, but it's unstable and can get
you into some kind of issues on the way. Use it at your own risk and when necessary run
futurerestore --exit-recovery, or use irecovery to exit recovery mode.
checkm8 exploit developed by axi0mX is the main engine behind checkra1n jailbreak. The
exciting part about this permanent unpatchable bootrom exploit is potentially ensured lifetime
jailbreak ability for A5-A11 devices. It means every future iOS release should be vulnerable.
Palera1n Jailbreak executes all necessary scripts to jailbreak, and the Pogo app is used to
install Procursus Bootstrap and Sileo. The package manager allows you to manage
repositories, view packages, and install “jailbreak” apps on iOS 15.0 up to iOS 15.7.1, and iOS
16.
Sileo is a modern APT Package Manager for iOS 12 and up with a focus on speed and usability.
It was designed to provide a real Cydia alternative for jailbroken devices. Sileo officially
supports all jailbreaks and can share its sources with Cydia if you're on unc0ver or checkra1n.
Amy, the developer behind Pogo, is working on implementing a tweak injection method for
Palera1n jailbreak. At present, you can install Cydia tweaks on jailbroken iOS 15 and iOS 16, but
not all will work. Instead, you can install apps like Filza, OpenSSH, AppStore++, NewTerm 2,
etc.
Pogo is packed with a CoolStar's Sileo 2.4, but Amy is pushing through a private repo also beta
releases. The build of Sileo bundled in this is considered beta. If you want more regular
updates, add the https://beta.anamy.gay repo to access the latest releases of Sileo APT.
Note: Palera1n Jailbreak for iOS 15 is recommended for advanced users. If you looking
forward to Cydia tweaks thoes are supported now on iOS 15.0 up to iOS 15.7.1.
Palera1n Jailbreak was released as an open-source project under GPL-3.0 license through
GitHub Repository. The latest Palera1n release works also on iOS 15.5 up to iOS 15.7 (and also
iOS 16). The Pogo app can be used with patched AMFI as long as it’s installed with a ramdisk.
Since version 1.2, the devs added semi-tethered support with tweaks to Palera1n. The jailbreak
creates a fake rootfs partition that could be modified, then copies the file system over. Only
downside is that it can use 5-10 extra GB of your storage. This will not work on 16 GB devices.
Recently, @mineekdev started working on a new branch of Palera1n jailbreak, with the main
focus on adding support for tweaks. This version boots the device with AMFI patches. On the
first run, it'll boot a ramdisk which dumps your onboard blob, and installs Sileo and Substitute.
Substitute is a tweak injection system that runs on already jailbroken devices. Basically, it is
used to run tweaks. Substitute 2.3.1 is using a newly designed tweak injection system that
allows loading a big number of tweaks for ultimate customization with minimal overhead on iOS
15.
On top of that, Palera1n with support for tweaks is works on all releases between iOS 15.0 up to
iOS 15.7.1. Tethered jailbreak is able to temporarily jailbreak the device during a single boot. To
start the device with a patched kernel, it must be “re-jailbroken” with a PC. This also means
that you will need a PC every time to boot your iPhone or iPad.
Palera1n for iOS 16 with tweak support was officially released soon. Of course, this version
works only with checkm8 compatible iPhones and iPads mentioned below. What's more, there
will be created a graphic interface (GUI) to make the jailbreak process more user-friendly.
In the new release of Palera1n iOS 16 jailbreak for A11 devices, the Pogo app will be replaced
with a new Palera1n loader app. From now on, this tool will be used to prepare the Bootstrap,
and install Sileo in uicache, the default manager for tweaks. iOS 16.0 – iOS 16.2 is supported.
On top of that the loader for Palera1n for iOS 16, also offers tools to fix some common issues
such as refreshing icon cache, remounting rootfs and preboot as read/write, start daemons,
respring SpringBoard, and activate installed tweaks with substitute-launcher.
Note: Palera1n for iOS 16 was released in the official GitHub in branch. It's still
recommended to use it at this stage only for experience users. A9 – A10 are not supported
because Apple doesn't allow to install iOS 16 on those devices.
At this stage of development, Nebulas custom launchd and script aren’t spawning the loader
app yet. If you’re installing with the experimental iOS 16 branch, you can install TrollStore using
an SSH Ramdisk, then jailbreak the device and install the loader app with TrollStore.
Supported devices
All A9-A11 systems on a chip (SoC) are supported by jailbreak. Below, you can find the actual
list of compatible Palera1n Jailbreak iPhones and iPads. The jailbreak was tested to run and
work without issues on iPhone X (GSM), iPhone 8, iPhone 7, and iPhone 6s running iOS 15.
• A9 – iPhone 6S, iPhone 6S Plus, iPhone SE, iPad (2017) 5th Generation.
• A9X – iPad Pro (12.9 in.) 1st generation, iPad Pro (9.7 in.).
• A10 – iPhone 7 and iPhone 7 Plus, iPad (2018, 6th generation), iPad (2019, 7th
generation) (iOS 14 not supported).
• A10X – iPad Pro 10.5” (2017), iPad Pro 12.9” 2nd Gen (2017).
To jailbreak iOS 15 or iOS 16 using Palera1n first check if your device is on the supported list.
Remember to disable the passcode on A10/A11 devices before proceeding with the jailbreak.
1. Install libimobiledevice on your Linux or Mac through brew. This library is required
to connect your iPhone through USB to the computer.
or on Linux distribution:
2. Clone the Palera1n repo from GitHub. It is used to exploit iOS firmware and boot the
device with AMFI patches. Next CD into this repository. Palera1n checkm8 jailbreak
with installed Sileo and Substitute (tweaks support) on iOS 15.0 – 15.7.1, and iOS 16
– 16.2. This is a work in progress and iPhones: X, 8+, 8, 7+, 7, 6s+, 6s, SE; iPods:
Touch 7; iPads: 5, 6, 7, and the Air 2 are supported.
3. Run the Palera1n script to jailbreak your iOS 15 / iOS 16 device with tweaks
support.
or enable semi-tethered jailbreak with tweak support (it will use 5-10 extra GB of your
storage).
4. Palera1n will replace the Tips app with Pogo IPA (can be also installed via
TrollStore).
5. Open the modified Tips app and tap on install.
6. Access Sileo from your Home Screen.
Note: To install Pogo app make sure your device is in normal mode. You'll have to uicache
in the Pogo app every time you will reboot your iPhone.
If you want to start from DFU mode add the argument after the script file to execute.
Palera1n Jailbreak offers access to verity of options and subcommands while jailbreaking iOS
15 or iOS 16. Below you can find the list of all available features with proper description.
Options:
--help Print this help
--tweaks Enable tweaks
--semi-tethered When used with --tweaks, make the jailbreak semi-tethered instead of tethered
--dfuhelper A helper to help get A11 devices into DFU mode from recovery mode
--skip-fakefs Don't create the fakefs even if --semi-tethered is specified
--no-baseband Indicate that the device does not have a baseband
--restorerootfs Remove the jailbreak (Actually more than restore rootfs)
--debug Debug the script
--serial Enable serial output on the device (only needed for testing with a serial cable)
Subcommands:
dfuhelper An alias for --dfuhelper
clean Deletes the created boot files
Possible Issues
Palera1n Jailbreak for iOS 15 – iOS 16 is still a work in progress, and you can get into some
issues while jailbreaking. Here are some discovered solutions for various situations.
1. “sudo usbmuxd -p -f” should fix most USB issues on Linux and install usbmuxd.
2. If your device is stuck in recovery, please run futurerestore --exit-recovery, or use
irecovery -n.
3. The Palera1n black screen after verbose issue can be fixed by using an onboard
blob. You can dump one using SSHRD Script.
4. If Pogo didn't install to Tips for some reason, you can install the Pogo IPA using
TrollStore.
5. Make AFC2 work, use “ldid -s /usr/bin/killdaemon && killdaemon”. Ensure you have
procursus' ldid and AFC2 installed first.
What's new
Version 1.4.2
• Various fixes.
• Increasing stability.
Version 1.4.1
• ibot.patched fix.
Version 1.4.0
• Fix rootless.
• Increase stability.
Version 1.3.0
• Increase stability.
Version 1.2.0
• Numerous fixes.
Version 1.1.1
• Fix --restorerootfs.
Version 1.1.0
Sponsored links
Comments
Reply
To update the Palera1n script through GitHub go inside the folder and use the pull command.
Reply
I encountered this problem when the theme source, error: architecture not found [", "iphone-arm64"]
what should i do?
Reply
You probably not running A9-A11 compatible device. Since iPhone XS and newer, there is
arm64e architecture, and it's not supported by palera1n jailbreak, and it never will.
After the command ./palera1n.sh writes no directory found if anything, I'm with Mac OS
Reply
You must "cd palera1n" into the folder if you downloaded the files with the git command. You are
executing the ./palera1n.sh from the directory where the file doesn't exist. Do everything exactly
like in the article and it will work.
Reply
The Palera1n Tweak version you are using doesn't work on iOS 15.7. It supports only iOS 15.0 up
to 15.3.1. Use the other branch for iOS 15.7 but it's more for developer use (tweaks will not
work).