Professional Documents
Culture Documents
Fpi 2023 005506 Ave Cde PRD Dza 23 001 R1
Fpi 2023 005506 Ave Cde PRD Dza 23 001 R1
1 11‐Sep‐2023
Abdallah Osama Sarath Babu Anees Aboobacker
CDE CDE CDM
0 Abdallah Osama Sarath Babu Anees Aboobacker 11‐Sep‐2023
Revision Prepared By Reviewed By Approved BY Date
Project Title FOUKA Desalination_Underground
Contractor METITO WATER TREATMENT SAE
End User ‐
Document Reference FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132
Document Type Fiberstrong® Product Drawings Page 1 + 20 Pages
Footnotes: CDE ‐ Component Design Engineer, CDO ‐ Component Design Officer, TL ‐ Team Leader, PE ‐ Process Expert
Drawing Title Fiberstrong® ‐ Pipe ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 1 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Pipe, PL/PL
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Outer Diameter
Minimum Total
Inner Diameter
Service/Piping
Laying Length
Thickness
Weight
Class
‐ DP ID TW OD L W
‐ bar mm mm mm mm Kg/m
Clarifier / Media 10.0 25 3.6 32.2 3,000 0.7
Filter / 10.0 50 3.6 57.2 3,000 1.2
Intermediate 10.0 80 4.2 88.4 6,000 2.3
Tank / RO / 10.0 100 4.2 108.4 10,000 2.8
Product Tank 10.0 125 4.2 133.4 10,000 3.5
10.0 150 4.2 158.4 10,000 4.1
10.0 200 4.2 208.4 10,000 5.5
10.0 250 4.4 258.8 10,000 7.2
10.0 300 5.1 310.2 6,000 9.9
10.0 350 5.7 361.4 11,800 13.0
10.0 400 6.2 412.4 11,800 16.1
10.0 450 6.8 463.6 11,800 19.9
10.0 500 7.3 514.6 11,800 23.7
10.0 600 8.4 616.8 11,800 32.7
10.0 700 9.5 719.0 11,800 43.1
10.0 800 10.6 821.2 11,800 54.9
10.0 900 11.6 923.2 11,800 67.6
10.0 1,000 12.7 1,025.4 11,800 82.2
10.0 1,600 19.2 1,638.4 11,800 198.8
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 2 of 18
Drawing Title Fiberstrong® ‐ Elbow ‐ Molded ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 2 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Total
Inner Diameter
Laying Length
Service/Piping
Elbow Radius
Elbow Angle
Thickness
Weight
Ratio
Class
‐ DP ID α R/ID TW L W
‐ bar mm Degrees ‐ mm mm kg
Clarifier / Media 10.0 250 45.00 1.5 5.1 270 3.6
Filter / 10.0 300 45.00 1.5 5.7 300 5.7
Intermediate 10.0 350 45.00 1.5 6.3 370 8.6
Tank / RO / 10.0 500 45.00 1.5 8.2 490 22.7
Product Tank 10.0 600 45.00 1.5 9.5 585 37.7
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 3 of 18
Drawing Title Fiberstrong® ‐ Elbow ‐ Molded ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 3 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Total
Inner Diameter
Laying Length
Service/Piping
Elbow Radius
Elbow Angle
Thickness
Weight
Ratio
Class
‐ DP ID α R/ID TW L W
‐ bar mm Degrees ‐ mm mm kg
Clarifier / Media 10.0 80 90.00 1.5 4.2 230 0.7
Filter / 10.0 100 90.00 1.5 4.2 260 1.0
Intermediate 10.0 150 90.00 1.5 4.2 335 2.0
Tank / RO / 10.0 200 90.00 1.5 4.4 410 3.4
Product Tank 10.0 250 90.00 1.5 5.1 485 6.1
10.0 300 90.00 1.5 5.7 560 9.7
10.0 400 90.00 1.5 7.0 750 21.0
10.0 450 90.00 1.5 7.6 835 28.9
10.0 500 90.00 1.5 8.2 925 38.4
10.0 600 90.00 1.5 9.5 1,110 63.9
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 4 of 18
Drawing Title Fiberstrong® ‐ Elbow ‐ Mitered ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 4 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Laying Length
Internal Bond
Elbow Radius
Elbow Angle
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Ratio
Class
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 5 of 18
Drawing Title Fiberstrong® ‐ Elbow ‐ Mitered ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 5 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Laying Length
Internal Bond
Elbow Radius
Elbow Angle
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Ratio
Class
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 6 of 18
Drawing Title Fiberstrong® ‐ Tee ‐ Molded ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 6 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Inner Diameter 1
Design Pressure
Minimum Total
Laying Lengths
Inner Diameter
Service/Piping
Thickness
Weight
Class
‐ DP ID ID1 TW L L1 W
‐ bar mm mm mm mm mm kg
RO 10.0 80 50 5.0 210 105 0.7
10.0 80 80 5.0 340 170 1.3
10.0 150 150 5.0 430 215 2.8
10.0 200 200 5.1 500 250 4.3
10.0 250 150 5.9 570 285 6.4
10.0 400 350 8.2 860 435 22.8
10.0 450 250 9.0 930 430 27.6
10.0 450 450 9.0 960 480 32.1
10.0 500 500 9.8 1,060 530 42.8
10.0 600 600 11.4 1,275 640 72.0
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 7 of 18
Drawing Title Fiberstrong® ‐ Tee ‐ Mitered ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 7 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Minimum Branch
Inner Diameter 1
Design Pressure
Inner Diameter
Service/Piping
Header Laying
Laying Length
Internal Bond
Bond Length
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Class
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 8 of 18
Drawing Title Fiberstrong® ‐ Reducer ‐ Molded ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 8 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Inner Diameter 1
Design Pressure
Minimum Total
Laying Lengths
Inner Diameter
Service/Piping
Thickness
Weight
Class
‐ DP ID ID1 TW L W
‐ bar mm mm mm mm kg
Clarifier / Media 10.0 150 100 5.0 460 1.1
Filter / 10.0 200 150 5.0 460 1.6
Intermediate 10.0 250 150 5.8 650 3.5
Tank / RO / 10.0 300 200 6.6 650 5.2
Product Tank 10.0 350 250 7.4 690 7.3
10.0 450 400 9.0 555 9.9
10.0 500 450 9.8 570 12.8
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 9 of 18
Drawing Title Fiberstrong® ‐ Reducer ‐ Mitered ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 9 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only Reducing Section
Inner Diameter 1
Laying Length ID
Design Pressure
Minimum Bond
Minimum Bond
Inner Diameter
Laying Length
Service/Piping
Laying Length
Internal Bond
Internal Bond
Lamination
Lamination
Lamination
Length ID1
Length ID1
Minimum
Minimum
Minimum
Minimum
Minimum
Thickness
Length ID
Length ID
Internal
Internal
Weight
Length
Class
ID1
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 10 of 18
Drawing Title CB Flange
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 12 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
CB Flange, CB/FF
Note:
1. Product Series: GRE
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Flange Drilling
Flange Qualified
Design Pressure
Minimum Total
Inner Diameter
Service/Piping
Laying Length
Thickness
Pressure
No. of Holes
Description
Weight
Bolt Pitch
Diameter
Diameter
Class
Bolt Size
Outside
Flange
Hole
‐ DP ID Pq TF L W Du Dst d n dB ‐
‐ bar mm bar mm mm Kg mm mm mm ‐ ‐ ‐
Intermediate 10.0 125 20.0 45 10 4.0 250 210.0 18 8 M16 EN1092‐1 PN10
Tank / RO
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 15 of 18
Drawing Title Wavistrong® ‐ Flange ‐ Taper Bell & Flat Face
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R0
Sheet Number 13 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Flange, TB/FF
Note:
1. Product Series: GRE
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Flange Drilling
Flange Qualified
Design Pressure
Minimum Total
Inner Diameter
Overall Length
Service/Piping
Laying Length
Thickness
Pressure
No. of Holes
Description
Weight
Bolt Pitch
Diameter
Diameter
Class
Bolt Size
Outside
Flange
Hole
‐ DP ID Pq L Lo TF W Du Dst d n dB ‐
‐ bar mm bar mm mm mm Kg mm mm mm ‐ ‐ ‐
Clarifier / Media 10.0 25 100 35 85 40 0.7 115 85.0 14 4 M12 EN1092‐1 PN10
Filter / 10.0 25 100 35 85 40 0.7 110 79.4 14 4 M12 ASME B16.5 Class 150
Intermediate 10.0 50 80 35 85 50 1.8 165 125.0 18 4 M16 EN1092‐1 PN10
Tank / RO / 10.0 80 64 35 95 40 2.0 200 160.0 18 8 M16 EN1092‐1 PN10
Product Tank 10.0 100 50 35 95 40 2.3 220 180.0 18 8 M16 EN1092‐1 PN10
10.0 150 40 35 95 45 4.0 285 240.0 23 8 M20 EN1092‐1 PN10
10.0 200 40 45 110 65 7.4 340 295.0 23 8 M20 EN1092‐1 PN10
10.0 250 32 45 110 75 10.5 395 350.0 23 12 M20 EN1092‐1 PN10
10.0 300 32 50 120 80 13.3 445 400.0 23 12 M20 EN1092‐1 PN10
10.0 350 25 55 120 90 18.0 505 460.0 23 16 M20 EN1092‐1 PN10
10.0 350 25 55 120 90 21.8 535 476.3 30 12 M27 ASME B16.5 Class 150
10.0 400 25 60 135 100 24.0 565 515.0 27 16 M24 EN1092‐1 PN10
10.0 450 25 60 135 105 27.1 615 565.0 27 20 M24 EN1092‐1 PN10
10.0 500 25 60 135 110 32.5 670 620.0 27 20 M24 EN1092‐1 PN10
10.0 600 25 60 150 125 47.0 780 725.0 30 20 M27 EN1092‐1 PN10
10.0 600 25 60 150 125 55.7 815 749.3 36 20 M33 ASME B16.5 Class 150
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R0 FL‐TB.xlsm 1 of 2
Drawing Title Wavistrong® ‐ Flange ‐ Taper Bell & Flat Face
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R0
Sheet Number 13 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Flange, TB/FF
Note:
1. Product Series: GRE
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Inner Diameter
Service/Piping
Flange Notes
Gasket Type
Bolt Torque
Class
‐ DP ID BT ‐ ‐
‐ bar mm Nm ‐ ‐
Clarifier / Media 10.0 25 10 Kroll & Ziller G‐ST‐P/S • Flange Thickness (TF) Tolerance: +5/0
Filter / 10.0 50 15 Kroll & Ziller G‐ST‐P/S • Torque values mentioned are meant only for ‘’Flat
Intermediate 10.0 80 25 Kroll & Ziller G‐ST‐P/S Face’’ FRP Flange connected to ‘’Flat Face’’ FRP or
Tank / RO / 10.0 100 25 Kroll & Ziller G‐ST‐P/S other material Flange and Blind Flange. Nothing
Product Tank 10.0 150 35 Kroll & Ziller G‐ST‐P/S that, FPI recommends to use steel spacer rings in
10.0 200 35 Kroll & Ziller G‐ST‐P/S case the steel flange and blind flange are ‘’Raised
10.0 250 50 Kroll & Ziller G‐ST‐P/S Face’’. If the FRP Flange will be connected to Rubber‐
10.0 300 50 Kroll & Ziller G‐ST‐P/S lined equipment such as valve, bellows, etc., FPI
10.0 350 75 Kroll & Ziller G‐ST‐P/S shall be contacted for further review to advise the
10.0 400 75 Kroll & Ziller G‐ST‐P/S torque values in such cases
10.0 450 75 Kroll & Ziller G‐ST‐P/S • Kroll & Ziller or Kempchen or equivalent (Rubber
10.0 500 75 Kroll & Ziller G‐ST‐P/S gaskets with steel inlay) can be used
10.0 600 100 Kroll & Ziller G‐ST‐P/S
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R0 FL‐TB.xlsm 2 of 2
Drawing Title Fiberstrong® ‐ Blind Flange
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 14 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Blind Flange, FF
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Flange Drilling
Design Pressure
Minimum Total
Service/Piping
Thickness
Diameter
No. of Holes
Nominal
Description
Weight
Bolt Pitch
Diameter
Diameter
Class
Bolt Size
Outside
Flange
Hole
‐ DP ND TF W Du Dst d n dB ‐
‐ bar mm mm kg mm mm mm ‐ ‐ ‐
Clarifier / Media 10.0 80 20 1.2 200 160.0 18 8 M16 EN1092‐1 PN10
Filter / 10.0 150 25 3.1 285 240.0 23 8 M20 EN1092‐1 PN10
Intermediate 10.0 250 35 8.4 395 350.0 23 12 M20 EN1092‐1 PN10
Tank / RO / 10.0 400 50 24.6 565 515.0 27 16 M24 EN1092‐1 PN10
Product Tank 10.0 450 55 32.0 615 565.0 27 20 M24 EN1092‐1 PN10
10.0 500 60 41.7 670 620.0 27 20 M24 EN1092‐1 PN10
10.0 600 70 66.1 780 725.0 30 20 M27 EN1092‐1 PN10
10.0 700 80 99.7 895 840.0 30 24 M27 EN1092‐1 PN10
10.0 900 100 193.8 1,115 1,050.0 33 28 M30 EN1092‐1 PN10
10.0 1,000 110 259.6 1,230 1,160.0 36 28 M33 EN1092‐1 PN10
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 16 of 18
Drawing Title Fiberstrong® ‐ Shop Joint ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 15 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Internal Bond
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Length
Length
Class
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 17 of 18
Drawing Title Fiberstrong® ‐ Field Joint ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1
Sheet Number 16 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 11‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
1 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Internal Bond
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Length
Length
Class
FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R1.xlsx Page 18 of 18
Application & Value Engineering
0 19‐Sep‐2023
Abdallah Osama Sarath Babu Anees Aboobacker
CDE CDE CDM
Revision Prepared By Reviewed By Approved BY Date
Project Title FOUKA Desalination_Underground
Contractor METITO WATER TREATMENT SAE
End User ‐
Document Reference FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R01
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132
Document Type Fiberstrong® Product Drawings Page 1 + 10 Pages
Footnotes: CDE ‐ Component Design Engineer, CDO ‐ Component Design Officer, TL ‐ Team Leader, PE ‐ Process Expert
Drawing Title Fiberstrong® ‐ Pipe ‐ Lamination Joint
Project Name FOUKA Desalination_Underground
Location Algeria
Contractor METITO WATER TREATMENT SAE
End User ‐
Drawing Number FPI‐2023‐005506‐AVE‐CDE‐PRD‐DZA‐23‐001‐R01
Sheet Number 1 This document contains confidential and proprietary information of Future Pipe
Project Number RFQ‐2023‐005506 // RFQ‐2023‐007132 Industries. No reproduction or disclosure of any part to third parties is allowed without
Sclae Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 19‐Sep‐2023 Abdallah Osama Sarath Babu Anees Abobacker
Pipe, PL/PL
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Outer Diameter
Minimum Total
Inner Diameter
Service/Piping
Laying Length
Thickness
Weight
Class
‐ DP ID TW OD L W
‐ bar mm mm mm mm Kg/m
Intake Pump / 6.0 1,200 14.1 1,228.2 11,800 109.4
Intermediate 6.0 1,400 16.2 1,432.4 11,800 146.7
pump /
Intermediate
pump‐CF /
Product from
the RO
membrane /
Intermediate ‐
CF / Product
from the RO
membrane /
Blending Tank
Height / PX
Brine outlet /
Filter BW gallery
height
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Laying Length
Internal Bond
Elbow Radius
Elbow Angle
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Ratio
Class
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Laying Length
Internal Bond
Elbow Radius
Elbow Angle
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Ratio
Class
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Minimum Branch
Inner Diameter 1
Design Pressure
Inner Diameter
Service/Piping
Header Laying
Laying Length
Internal Bond
Bond Length
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Weight
Length
Length
Class
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only Reducing Section
Inner Diameter 1
Laying Length ID
Design Pressure
Minimum Bond
Minimum Bond
Inner Diameter
Laying Length
Service/Piping
Laying Length
Internal Bond
Internal Bond
Lamination
Lamination
Lamination
Length ID1
Length ID1
Minimum
Minimum
Minimum
Minimum
Minimum
Thickness
Length ID
Length ID
Internal
Internal
Weight
Length
Class
ID1
Blind Flange, FF
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Flange Drilling
Design Pressure
Minimum Total
Service/Piping
Thickness
Diameter
No. of Holes
Nominal
Description
Weight
Bolt Pitch
Diameter
Diameter
Class
Bolt Size
Outside
Flange
Hole
‐ DP ND TF W Du Dst d n dB ‐
‐ bar mm mm kg mm mm mm ‐ ‐ ‐
Intake Pump / 6.0 1,200 105 347.1 1,455 1,380.0 39 32 M36 EN1092‐1 PN10
Intermediate 6.0 1,400 120 525.9 1,675 1,590.0 42 36 M39 EN1092‐1 PN10
pump /
Intermediate
pump‐CF /
Product from
the RO
membrane /
Intermediate ‐
CF / Product
from the RO
membrane /
Blending Tank
Height / PX
Brine outlet /
Filter BW gallery
height
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Internal Bond
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Length
Length
Class
Note:
1. Product Series: GRP
2. Design Temperature: 50°C
3. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling pupose only
Design Pressure
Minimum Bond
Inner Diameter
Service/Piping
Internal Bond
Lamination
Lamination
Minimum
Minimum
Minimum
Thickness
Internal
Length
Length
Class