Professional Documents
Culture Documents
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS
interface and optical sensor technology can achieve a resolution
of max. 29 bits.
A through hollow shaft up to 14 mm and a blind hollow shaft up to
15 mm are available, as well as versions with additional SinCos or
RS422 incremental track.
-40°... +90°C IP
Mechanical Safety-LockTM High rotational Temperature High protection High shaft load Shock / vibration Magnetic field Reverse polarity SinCos
drive speed range level capacity resistant proof protection
Reliable Versatile
• Tried-and-tested in applications with the highest demands, • Available with SSI or BiSS interface and combined with
such as in wind energy or mobile automation. SinCos incremental signals.
• Absolutely reliable operation in areas with strong magnetic • The right fixing solution or type of connection available for
fields, thanks to mechanical gear with optical sensor technology. every application.
• Rugged die-cast housing, remains sealed even in harsh • SET button and LED for simple start-up.
everyday use.
• -40 °C ... +90 °C: use in wide temperature range and protection IP67.
Order code 8.5863 . X X X X . X X 2 X If for each parameter of an encoder the underlined preferred option is selected,
then the delivery time will be 10 working days for a maximum of 10 pieces.
Shaft version Type a b c d e f g Qts. up to 50 pcs. of these types generally have a delivery time of 15 working days.
1) US version. 3) Preferred type only in conjunction with flange type 1. 5) Resolution, preset value and counting direction factory-programmable.
2) Preferred type only in conjunction with flange type 2. 4) Only in conjunction with interface type 1 and 2. 6) For the cable connection type, cable material PUR.
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
Order code 8.5883 . X X X X . X X 2 X If for each parameter of an encoder the underlined preferred option is selected,
then the delivery time will be 10 working days for a maximum of 10 pieces.
Hollow shaft Type a b c d e f g Qts. up to 50 pcs. of these types generally have a delivery time of 15 working days.
Mounting accessory for hollow shaft encoders Dimensions in mm [inch] Order no.
R7
30 1,18 0 ,2
8
Preassembled cables M12 female connector with coupling nut, 8-pin, A coded, straight 05.00.6041.8211.002M
single-ended
2 m [6.56‘] PVC cable
Connectors M12 female connector with coupling nut, 8-pin, A coded, straight (metal) 05.CMB 8181-0
M23 female connector with coupling nut, 12-pin, cw 8.0000.5012.0000
Further Kübler accessories can be found at: kuebler.com/accessories
Further Kübler cables and connectors can be found at: kuebler.com/connection-technology
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
Technical data
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
DIR input
Direction input: A HIGH signal switches the direction of rotation from the
default cw to ccw. This function can also be factory-programmed to be
inverted. If DIR is changed when the device is already switched on, then this
will be interpreted as an error.
The LED will come ON and the status output will switch to LOW.
If this input is not used, it should be connected to 0 V (Encoder ground GND)
in order to avoid interferences.
Power-ON
After Power-ON the device requires a time of approx. 150 ms before valid data
can be read.
Hot plugging of the encoder should be avoided.
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
Terminal assignment
Interface Type of connection Features Cable (isolate unused cores individually before initial start-up)
Signal: 0V +V C+ C- D+ D- SET DIR Stat N/C N/C N/C H
1, 2 1, 2, A, B, E, F SET, DIR, Status
Core color: WH BN GN YE GY PK BU RD BK - - - shield
Interface Type of connection Features Cable (isolate unused cores individually before initial start-up)
SET, DIR, Status Signal: 0V +V C+ C- D+ D- SET DIR Stat N/C 0 Vsens +Vsens H
5 1, 2, A, B, E, F
sensor output Core color: WH BN GN YE GY PK BU RD BK - GY-PK RD-BU shield
Interface Type of connection Features Cable (isolate unused cores individually before initial start-up)
SET, DIR, SinCos Signal: 0V +V C+ C- D+ D- SET DIR A B H
3, 4, 7, 8 1, 2, A, B, E, F
or incr. RS422 Core color: WH BN GN YE GY PK BU RD BK VT GY-PK RD-BU shield
Interface Type of connection Features Cable (isolate unused cores individually before initial start-up)
SinCos o. incr. RS422 Signal: 0V +V C+ C- D+ D- A B 0 Vsens +Vsens H
6, 9 1, 2, A, B, E, F
sensor output Core color: WH BN GN YE GY PK BU RD BK VT GY-PK RD-BU shield
+V: Supply voltage encoder +V DC Top view of mating side, male contact base
0 V: Supply voltage encoder ground GND (0 V)
0 Vsens / +Vsens: Using the sensor outputs of the encoder,
1 9 8
the voltage present can be measured
2
and if necessary increased accordingly. 7
3 10 12
C+, C-: Clock signal
11 6
D+, D-: Data signal 4
5
A, : Incremental output channel A (cosine)
B, : Incremental output channel B (sine)
SET: SET input M12 connector, 8-pin M23 connector, 12-pin
DIR: Direction input
Stat: Status output
PH H: Plug connector housing (shield)
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
60,6 2,39
2 1
1 3 x M3, 6 [0.24] deep
2 3 x M4, 8 [0.32] deep
53 [2.12]
36 [1.42]
58 2,28
48 [1.89]
D
13 [0.51]
L
0°
12
3x
D Fit L 20°
10 0,39
6 [0.24] h7 10 [0.39] 3 [0.12]
10 [0.39] f7 20 [0.79] 3 [0.12]
1/4“ h7 7/8“ 49,5 1,95
90,1 3,55
3/8“ h7 7/8“
52 2,05
50 h7 [1.42]
58 2,28
53 2,09
42 1,65
D
13 [0.51]
0°
12
3x
3 0,12 20°
3 0,12
D Fit L
4 0,16
6 [0.24] h7 10 [0.39] 59,5 2,34
10 [0.39] f7 20 [0.79] 81,5 3,21
1/4“ h7 7/8“
3/8“ h7 7/8“
52,4 2,06
63,5 2,5
D
13 0,51
3/8“ h7 7/8“
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
1 2 3 4 5 6 7 8
recommendation:B
52 2,05
14 0,55
2 3 x M3, 6 [0.24] deep
3 Recommended torque for the
81 3,19
30 1,18
clamping ring 0.6 Nm
58 2,28
50 1,97
C
max.
3x
12
0°
2 1
D Fit 4 0,16
14 [0.55]
+0,2 Date Name
°
Absolut Multiturn En
ca.25
4 SET button
52 2,05
1 2 3 4 5 6 7 8
5 Recommended torque for the C
max.
A A
5 56,5 2,22 2 1
64,5 2,54 D
71,7 2,82 42[1.65]
D
40,9 [1.61]
36,7 [1.44]
1 Nut für Dre
B D FitL 2,4 [0.09] B Empfehlun
3,99 -0,02 [0.16]
nach DIN 7
10 [0.39] H7
14 [0.55]
°
D Passung L
14 [0.55] H7 E 10[0,39] H7 3 Status-LED
33 1,3
15 [0.59] *) H7 12[0,47] H7
4 SET-Taste
50 1,97
52 2,05
14[0,55] H7
3/8“ H7 5 empfohlen
15[0,59] H7 30
C 1/2“ H7 C
max.
3/8" H7
This document is property of Fritz Kübler GmbH, use
*) Blind hollow shaft, 1/2" H7 General
3x
56,5 2,22 F 4 3
Surface:
5 2 1
Oberfläche:
-0,2
+0,2 Date
64,5 2,54 D Drawn by
Bearb. 10.12.07
2 2810 17.06.16 los Approv. by
71,7 2,82
Gepr.
42[1.65] Ra 1,6
1 2480 01.08.13 al Fritz Küb
D 0 10.12.07 daD Zähl- un
1 2 3 4 Rev. St.
Revision Rev. No./Änd. Nr. Date Name 78054 V
F
8.5883.1/2XXE/F
Surface:
Oberfläche:
-0,2
+0,2 Date Name
Drawn by
Bearb. 10.12.07 da
Absolute encoders – multiturn
Standard
mechanical multiturn, optical Sendix 5863 / 5883 (shaft / hollow shaft) SSI / BiSS + incremental
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8
60,6 2,39
60,6 2,39
1 Fixing screws DIN 912 M2,5 x 6
(washer included in delivery) 3,1 0,12 3,1 0,12
2 Recommended torque for the
clamping ring 0.6 Nm
30 1,18
30 1,18
58 2,28
58 2,28
53 2,09
53 2,09
20 0,79
20 0,79
25°
25°
C C
max.
max.
D Fit
10 [0.39] H7
12 [0.47] H7 4 0,16 4 0,16 D D
17
This document is property of Fritz Kübler
ThisGmbH,
documentuse is property of Fritz Kübler GmbH, use
General General
Scale:
Material: Scale: Materia
0,
of this document without written permission
of this document
is without written permission is
65 [2.56] L: Einstecktiefe bei
L: Sackloch-Hohlwelle
Einstecktiefe bei Sackloch-Hohlwelle prohibited. prohibited. tolerances Werkstoff:
tolerances
Maßstab: Maßstab:
Werksto
3
L 13,25 0,52 Das Urheberrecht an dieser Zeichnung Das
verbleibt
Urheberrecht
uns. an dieser Zeichnung verbleibt uns.
4,
Allgemeintol. Allgemeintol.
Type: Type:
= Check item Sie darf ohne unsere vorherige Zustimmung
= Check item Sie darfweder
ohne unsere vorherige Zustimmung weder
DIN ISO gemacht oder Typ:
DIN ISO 1:1 5883 1:1 Typ:
(drawing with cable) Prüfmaß vervielfältigt noch DrittenPrüfmaß
zugänglich vervielfältigt
gemacht oder noch Dritten zugänglich
auf andere Weise mißbraucht werden. aufZuwieder-
andere Weise mißbraucht werden. Zuwieder-Size: Title:/Benennung:Size: Title:/Be
handlungen verpflichten zu Schadenersatz.
handlungen verpflichten 2768-m-H
zu Schadenersatz. Format: A3 2768-m-H Format: A3
F F
8.5883.5/6XX4 8.58
Surface: Surface:
Oberfläche: Oberfläche:
-0,2 -0,2
+0,2 4 2810 17.06.16
+0,2 4 los2810 17.06.16
Date los
Name Date Name
30 1,18
Revision
65 2,56
72 2,83
50 1,97
D
86,3 3,4
C
D Fit 1
10 [0.39] H7 2,5 0,1
12 [0.47] H7
14 [0.55] H7 67,7 2,67
15 [0.59] *) H7
3/8“ H7 D
1/2“ H7
*) Blind hollow shaft,
insertion depth (L) max. = 30 mm [1.18“]
E
D Passung L
1 empfohlenes Drehmoment für Klemmring 0,6 Nm
10[0,39] H7
12[0,47] H7
14[0,55] H7
15[0,59] H7 30 This document is property of Fritz Kübler GmbH, use
General
of this document without written permission is Scale: Material:
Werkstoff:
3/8" H7 prohibited. tolerances Maßstab:
Das Urheberrecht an dieser Zeichnung verbleibt uns.
Allgemeintol. Type:
1/2" H7
= Check item
Prüfmaß
Sie darf ohne unsere vorherige Zustimmung weder
vervielfältigt noch Dritten zugänglich gemacht oder DIN ISO 1:1 Typ: 5883
auf andere Weise mißbraucht werden. Zuwieder- Size: Title:/Benennung:
handlungen verpflichten zu Schadenersatz. 2768-m-H Format: A3
F
8.5883.3/4
Surface:
Oberfläche:
L: Einstecktiefe bei Sackloch-Hohlwelle -0,2
+0,2 Date Name
Drawn by
Bearb. 01.08.13 al
Approv. by
Gepr.
Ra 1,6
1 2810 17.06.16 los Fritz Kübler GmbH Drawingnumber:/Zeich
0 2480 01.08.13 al Zähl- und Sensortechnik
1 2 3 4 Rev. St.
Revision Rev. No./Änd. Nr. Date Name 78054 VS-Schwenningen Z1589