Professional Documents
Culture Documents
2 English
02
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
Safety Information
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle
triangle is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) is a warning sign alerting you of important
dangerous voltage inside the product. NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.
SERVICING TO QUALIFIED SERVICE PERSONNEL.
English 3
4 English
02
• Do not write on the printed side with a ball-point
Disc Handling
Safety Information
pen or pencil.
• Do not use record cleaning sprays or antistatic
Disc Shape sprays to clean discs. Also, do not use volatile
chemicals, such as benzene or thinner.
• Use discs with regular • Do not apply labels or stickers to discs. (Do not
shapes. If you use an irregular use discs fixed with exposed tape adhesive or
disc (a disc with a special leftover peeled-off stickers.)
shape), you can damage the player.
• Do not use scratch-proof protectors or covers.
Holding discs • Do not use discs printed with label printers
available on the market.
• Avoid touching the surface of
a disc where data has been • Do not load warped or cracked discs.
recorded. • Before connecting other components to this
player, be sure to turn them off.
Blu-ray Discs
• Do not move the player while it is playing a disc.
• Do not leave a Blu-ray Disc in the player for long The disc can be scratched or damaged and the
periods of time. Remove the Blu-ray Disc from player’s internal parts can be damaged.
the player and store it in its case. • Do not put a flower vase filled with water or any
• Be careful not to scratch or leave fingerprints on small metal objects on the player.
the surface of the Blu-ray Disc. • Be careful not to put your hand into the disc
slot.
DVD-VIDEO, Audio CD (CD-DA) • Do not place anything other than the disc in the
• Wipe off dirt or contamination on the disc with a disc slot.
soft cloth. • Interference from exterior sources such as
lightening and static electricity can affect
Disc Storage the normal operation of this player. If this
occurs, turn the player off and on again with
Be careful not to damage the disc because the the POWER button, or disconnect and then
data on these discs is highly vulnerable to the reconnect the AC power cord to the AC power
environment. outlet. The player will operate normally.
• Do not keep under direct sunlight. • Be sure to remove the disc and turn off the
• Keep in a cool ventilated area. player after use.
• Store vertically. • Disconnect the AC power cord from the AC
• Keep in a clean protection jacket. outlet when you don’t intend to use the player
• If you move your player suddenly from a cold for long periods of time.
place to a warm place, condensation may occur • To clean a disc, wipe it in a straight
on the operating parts and lens and cause line from the inside to the outside of
abnormal disc playback. If this occurs, unplug the disc.
the player, wait for two hours, and then connect • Do not expose the player to any
the plug to the power outlet. Then, insert the liquid.
disc, and try to play back again. • When the AC plug is connected to a wall outlet,
the player will still draw power (standby mode)
when it is turned off.
English 5
6 English
ENGLISH
2 Blu-ray Disc Player Features
Connections 22 Connecting to a TV
22 Case 1 : Connecting to a TV with an HDMI Cable
- Best Quality (Recommended)
23 Case 2 : Connecting to a TV with an Audio/Video
cable - Good Quality
English 7
8 English
ENGLISH
43 Initial Settings
43 Anynet+(HDMI-CEC)
43 BD Data Management
44 Time Zone
44 DivX® Video On Demand
44 Reset
44 Language
44 Security
44 BD Parental Rating
44 DVD Parental Rating
44 Change Password
45 General
45 Front Display
45 Light Effect
45 Network Remote Control
45 Support
45 Software Upgrade
47 Contact Samsung
English 9
Appendix 67 Troubleshooting
69 Repairs
70 Specifications
10 English
03
Disc Types and Contents your player can play
Getting Started
Term Logo Icon Definition
✎✎ NOTE
`` The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
`` If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
`` Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
`` Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.
English 11
12 English
03
• Use a 700MB (80 minute) CD-RW/-R disc. Both players and discs are coded by region.
Getting Started
If possible, do not use an 800MB (90 minute) or These regional codes must match for a disc to
larger disc, as the disc may not play back. play. If the codes do not match, the disc will not
• If the CD-RW/-R disc was not recorded as a play.
closed session, you may experience delays The Region Number for this player is displayed on
when playing back the beginning of the disc or the top panel of the player.
all recorded files may not play.
• Some CD-RW/-R discs may not play on this Region
Disc Type Area
player, depending on the device which was Code
used to burn them. For contents recorded on North America, Central America,
a
CD-RW/-R media from CDs for your personal South America, Korea, Japan,
use, playability may vary depending on the Taiwan, Hong Kong and South
contents and discs. East Asia.
AVCHD (Advanced Video Codec High Blu-ray Disc Europe, Greenland, French
Definition) b territories, Middle East, Africa,
Australia and New Zealand.
• This player can play back AVCHD format discs.
c
These discs are normally recorded and used in India, China, Russia, Central
camcorders. and South Asia.
• The AVCHD format is a high definition digital
video camera format. The U.S., U.S. territories and
• The MPEG-4 AVC/H.264 format compresses
1 Canada
images with greater efficiency than the
conventional image compressing format. Europe, Japan, the Middle East,
• Some AVCHD discs use the “x.v.Color” format.
2 Egypt, South Africa, Greenland
This player can play back AVCHD discs that use
Taiwan, Korea, the Philippines,
“x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
3 Indonesia, Hong Kong
• “AVCHD” and the AVCHD logo are trademarks Mexico, South America,
DVD-VIDEO
of Matsushita Electronic Industrial Co., Ltd. and Central America, Australia,
Sony Corporation. 4 New Zealand, Pacific Islands,
✎✎ NOTE Caribbean
`` Some AVCHD format discs may not play, depending Russia, Eastern Europe, India,
on the recording condition.
AVCHD format discs need to be finalized.
5 most of Africa, North Korea,
Mongolia
`` “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
`` Some DivX, MKV and MP4 format discs may not
6 China
English 13
Frame rate
File Extension Container Video Codec Resolution Bit rate (Mbps) Audio Codec
(fps)
Divx 3.11/4.x/ MP3
1920x1080 6 ~ 30 8
5.1/6.0 AC3
*.avi AVI H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 DTS Core
DivX 3.11/4.x/ 6 ~ 30 8 MP3
1920x1080
5.1/6.0 AC3
*.mkv MKV H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 DTS Core
14 English
03
/5.1/6.0 AC3
*.asf ASF H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
Getting Started
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 WMA
Limitations
-- Even when the file is encoded by a supported codec mentioned above, a file might not be played if its
content has a problem.
-- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.
-- Files having higher Bit rate/frame rate than standard may stutter with sound/video playback.
-- Seek (skip) function is not available if the file's index table is damaged.
-- When you playback a file remotely through network connection, video playback may stutter depending
on established network speed.
Video decoder
-- Supports up to H.264 Level 4.1
-- Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA 9 PRO multi-channel if number of channels is more than 2.
-- Does not support WMA 9 Lossless, voice.
-- Does not support WMA sampling rate of 22050Hz mono
-- Does not support APDCM MULAW, ALAW
English 15
Accessories
16 English
2D3D SOURCE
1 2 3
4 5 6
7 8 9
SUBTITLE AUDIO
Getting Started
DISC MENU MENU TITLE MENU
POPUP
TOOLS INFO
RETURN EXIT
INTERNET@
SMART SEARCH REPEAT
HUB
79
MUTE
VOL CH
✎✎ NOTE
`` Use only the provided audio/video cable that comes with this player.
The signal from an external source may not be output properly if using other audio/video cable for the connection.
If you lost this cable, visit the nearest Samsung service center for purchasing the cable.
`` Make sure that the player is installed standing on the ground or hanging on the wall.
Laying down the product on the ground may cause the product malfunction.
Top Panel
i b
d
c
g e
h
f
English 17
You can connect a USB memory flash stick here and use it as storage when
9 USB HOST the player is connected to BD-LIVE. You can also use the USB Host for software
upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
✎✎ NOTE
`` You can perform software upgrades using the USB Host jack with a USB memory flash stick only.
`` When the player displays the Blu-ray Disc menu, you may not start the movie by pressing the Play button on the player
or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER
button.
18 English
03
Getting Started
a
b
c
d
e
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal
2 HDMI OUT on your TV for the best quality picture or to your AV receiver for the best quality
sound.
3 A/V OUT Connects the input of external equipment using a audio/video cable.
5
Can be used for network based services (See pages 57~66), BD-LIVE and software
LAN
upgrades using a network connection.
English 19
TV
POWER POWER
Turn the player on and off. Turn the TV on and off.
(To operate your TV, please refer to page 21)
Press to eject a disc. 2D3D SOURCE
Press this when you want to use 3D After setup, allows you to set the input
function. 1 2 3 source on your TV.
03
Operate Your TV
Brand Code Brand Code
Getting Started
You can control certain functions of your TV with
NOBLEX TV POWER+66
this remote control. SAMSUNG
TV POWER+01, +02,
+03, +04, +05, NOKIA TV POWER+74
+06, +07, +08, +09
Button Function NORDMENDE
TV POWER+72, +73,
AIWA TV POWER+82 +75
TV POWER Used to switch the television on and off. TV POWER+53, +54,
TV POWER+10, +11, PANASONIC
+74, +75
Used to select an external source ANAM +12, +13, +14,
TV SOURCE
connected to the TV. +15, +16, +17, +18
PHILIPS
TV POWER+06, +55,
+56, +57
TV VOL (+/–) Used to adjust the volume of the television. BANG & OLUFSEN TV POWER+57
TV POWER+06, +56,
PHONOLA
BLAUPUNKT TV POWER+71 +57
TV CH (,/.) Used to select the desired channel.
BRANDT TV POWER+73 TV POWER+58, +59,
PIONEER
TV MUTE Used to toggle the sound on and off. +73, +74
BRIONVEGA TV POWER+57
✎✎ NOTE
CGE TV POWER+52 RADIOLA TV POWER+06, +56
CONTINENTAL RADIOMARELLI TV POWER+57
TV POWER+75
`` The functions listed above will not necessarily work EDISON
RCA TV POWER+45, +46
on all televisions. If you encounter problems, use the TV POWER+19, +20,
+23, +24, +25, REX TV POWER+74
TV remote control. DAEWOO +26, +27, +28,
+29, +30, +31, TV POWER+57, +72,
+32, +33, +34 SABA
To determine whether your television is
+73, +74, +75
EMERSON TV POWER+64
compatible, follow the instructions below. SALORA TV POWER+74
FERGUSON TV POWER+73
1. Switch your television on. FINLUX
TV POWER+06, +49, SANYO
TV POWER+41, +42,
+57 +43, +44, +48
2. Point the remote control towards the
FORMENTI TV POWER+57 SCHNEIDER TV POWER+06
television.
FUJITSU TV POWER+84 SELECO TV POWER+74
3. Press and hold the TV POWER button, and
GRADIENTE TV POWER+70 TV POWER+36, +37,
then enter the two-figure code in the table SHARP
+38, +39, +48
TV POWER+49, +52,
to the right that corresponds to the brand of GRUNDIG
+71
your television by pressing the appropriate TV POWER+60, +72,
SIEMENS TV POWER+71
HITACHI
number buttons. +73, +75 SINGER TV POWER+57
If your television is compatible with the remote IMPERIAL TV POWER+52 SINUDYNE TV POWER+57
control, it will switch off. JVC TV POWER+61, +79 SONY TV POWER+35, +48
The remote is now programmed to operate TV POWER+06, +19, TELEAVA TV POWER+73
LG
the TV. +20, +21, +22, +78 TV POWER+67, +73,
✎✎ NOTE
TELEFUNKEN
LOEWE TV POWER+06, +69 +75, +76
English 21
HDMI cable
✎✎ NOTE
`` An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
`` If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed
(category 2) HDMI cable.
`` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
`` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
`` When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
`` You must have an HDMI connection to enjoy videos with 3D technology.
`` A long HDMI cable may cause a screen noise. If this occurs, set Deep Color to Off in the menu.
`` If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or Digital Audio Out to
your display device or an audio sytem to hear audio.
22 English
04
1. Using an Audio/Video cable, connect the A/V OUT (yellow) terminal on the player to the VIDEO IN
Connections
(yellow) / AUDIO IN (red and white) terminals of your TV.
2. Turn on the player and TV.
3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears
on the TV screen.
• If you have set the remote control to operate your TV (See page 21), press the TV SOURCE button
on the remote control and select VIDEO as the external source of the TV.
Audio/Video cable
✎✎ NOTE
`` Noise may be generated if the audio cable is placed too close to the power cable.
`` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 24~25)
`` The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your
TV.
!! CAUTION
`` Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
English 23
• Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause
damage to the speakers and your ears.
• Set the audio output format according to the capabilities of your AV receiver. (See pages 36~39)
• The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the
user manual of your AV receiver.
HDMI cable
HDMI cable
24 English
04
System (AV receiver with Dolby Digital (Stereo Amplifier) - Good Quality
or DTS decoder) - Better Quality
Connections
1. Using the Audio/Video cable, connect the A/
1. Using an optical cable, connect the DIGITAL V OUT (yellow) terminal on the player to the
AUDIO OUT (OPTICAL) terminal on the AUDIO IN (red and white) terminals of your
player to the DIGITAL AUDIO IN (OPTICAL) stereo using the red and white wires.
terminal of your AV receiver. 2. Using the video signal cable(s), connect the
2. Using the video signal cable(s), connect the HDMI terminal on the player to the HDMI
HDMI or A/V OUT terminal on the player to terminal on your TV or connect the yellow
the HDMI or VIDEO IN terminal of your TV. wire from the Audio/Video cable to the AV In
(See pages 22~23) terminal of your TV. (See pages 22~23)
3. Turn on the player, TV, and AV receiver. 3. Turn on the player, TV and Stereo Amplifier.
4. Press the input select button of the AV receiver 4. Press the input select button of the Stereo
to select the external input and hear sound Amplifier to select the external input in order
from the player. Refer to your AV receiver’s user to hear sound from the player. Refer to your
manual to set the AV receiver’s audio input. Stereo Amplifier’s user manual to set the Stereo
Amplifier’s audio input.
5. Press the input selector on your TV remote control
to select the video source (HDMI or Video.) 5. Press the input selector on your TV remote control
to select the video source (HDMI or Video.)
Case 3 : Audio/
Video cable
Red White
✎✎ NOTE
`` If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output
setting as PCM.
`` To connect to your TV using the Audio/Video cable, you may need to connect an extension cable to the yellow video wire.
If you use an extension cable, the cable must have an RCA male plug on one end and an RCA female jack on the other.
English 25
This player lets you use network based services (See pages 57~66) such as Smart Hub and BD-LIVE,
and download software upgrades when it is connected to a network. We recommend using an AP (Access
Point) or IP router for the connection. For more information on router connections, refer to the user
manual of the router or contact the router manufacturer for technical assistance.
Cable Network
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal
of your modem or router.
2. To set the network options, see pages 39~43.
Router
Broadband modem
(with integrated router) Or Broadband modem
Broadband Broadband
service service
✎✎ NOTE
`` Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s
policy. For more information, contact your ISP (Internet Service Provider).
`` For DSL users, please use a router to make a network connection.
`` To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
26 English
04
Your player has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer
Connections
(a router or modem).
To set the network options, see pages 39~43.
Broadband
service
✎✎ NOTE
`` To use a wireless network, your player must be connected to a wireless IP sharer (router). If the wireless IP sharer
supports DHCP, your player can use a DHCP or static IP address to connect to the wireless network.
`` Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
`` If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, this player will not support a connection in compliance with new Wi-Fi certification
specifications.
`` If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)
or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
`` You can setup a wireless network three ways:
-- Wireless (General)
-- Using WPS(PBC)
-- One Foot Connection
Wireless (General) includes both Automatic and Manual setup procedures.
`` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance,
obstacles, interference by other radio devices, etc).
`` Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
`` The player supports only the following wireless security key protocols :
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
`` To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
English 27
Installation Precautions
• If you install your player on a wall, the wall must be flat and vertical.
• Avoid installing the player in areas with high temperature or humidity, or on a wall that cannot sustain
the weight of the set.
• Check the strength of the wall. If the strength of the wall is insufficient to support the player, make sure
to reinforce the wall before installing.
• Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase
and use the appropriate mollies and fixing screws.
• Connect all cables from external devices (TV, etc.) to the player before you install it.
• If you are installing the player onto plasterboard (dry wall), we recommend locating a stud behind the
wall and screwing the support screws into the stud.
• To prevent electric shock, be sure to turn off the player before you install it.
• Do not hang on the installed player and avoid hitting it.
• Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in
damage to the product.
• If you install the player on a wall, please make sure that a child does not pull any of connecting cables,
as it may cause the player to fall.
28 English
04
1. Insert the Bracket-Set into the bottom slot of the Blu-ray Disc player. Insert the two screws as shown
Connections
below, and then turn them clockwise to secure it.
2. Place the Wall Bracket on the wall so that the arrow side faces upward and use four screws (not
included) to fix it on the wall. Drive the screws into a stud or into mollies for secure support.
After the Bracket-Set is installed, slide and insert the Blu-ray Disc player into the appropriate
slots of the Wall Bracket.
✎✎ NOTE
`` Screws for the wall bracket are not included. Purchase screws (and mollies) appropriate for your type of wall.
English 29
✎✎ NOTE
Deutsch Ελληνικά Magyar
Indonesia Italiano 한국어
m Move " Enter `` When the player is connected to the TV for the first
time, the player turns on automatically. This is not a
malfunction.
`` The Home menu will not appear if you do not
2. Press the ▲▼◄► buttons to select the
configure the initial settings except as noted below.
desired language, and then press the ENTER
button. `` If you press the BLUE (D) button during the network
setup, you can access the Home menu even if the
3. Press the ENTER button to select Start.
network setup is not completed yet.
4. Press the ▲▼ buttons to select the desired
`` If you want to display the Initial Setting screen again
TV Aspect Ratio, and then press the ENTER
to make changes, select the Reset option. (See page
button. (See page 33)
44)
5. Press the ▲▼ buttons to select the desired
`` If you use an HDMI cable to connect the player to an
Network Settings : Wired, Wireless (General),
Anynet+(HDMI-CEC)-compliant Samsung TV and
WPS(PBC) or One Foot Connection, and
1.) You have set the Anynet+(HDMI-CEC) feature
then press the ENTER button. If you do not
to On in both the TV and the player and 2.) You have
know the details of your Network Settings,
set the TV to a language supported by the player,
press the BLUE (D) button on your remote
the player will select that language as the preferred
instead to skip Network Settings here, finish
language automatically.
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to `` If you leave the player in the stop mode for more
pages 39~43 for more information about the than 5 minutes without using it, a screen saver will
Network settings. When done, go to Step 6. appear on your TV. If the player is left in the screen
saver mode for more than 20 minutes, the power
6. The Home menu appears. (For more
will automatically turn off.
information about the Home menu, please
see page 31.)
30 English
2D3D
BONUSVIEW SOURCE
1 2 3
4 5 6
7 8 9
SUBTITLE AUDIO
0
Accessing the Settings Menu 2. Press the ◄► buttons to select Settings,
05
and then press the ENTER button.
3. Press the ▲▼ buttons to select the desired
Setup
DISC MENU MENU TITLE MENU
• Home Menu
Security
General > Move " Enter ' Return
Support HDMI Deep Color : Auto
My Contents
Videos
Photos
Music 2 Above : The Settings menu showing the 3D
Settings sub-menu.
3
My Devices Internet Settings
The following menu items are on the Settings
Menu :
1 4 • Display
d WPS(PBC) 5 • Audio
• Network
• System
1 Selects My Devices.
• Language
2 Selects My Contents. • Security
3 Selects Internet. • General
• Support
4 Selects Settings.
The menu items are addressed in the order
5 Displays the buttons available. listed above on the following pages, starting with
Display.
English 31
You can configure various display options such as Lets you enter the actual screen size of your TV so
the TV Aspect Ratio, Resolution, etc. that the player can adjust the image according to
the screen size and display an optimal 3D image.
(For 3D displays bigger than 116 inches, simply
3D Settings setting it as 116 is also a safe choice.)
Select whether to play a Blu-ray Disc with 3D !! CAUTION
contents in 3D Mode. `` If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the player’s
Settings HDMI OUT port using a high-speed HDMI cable. Put
Display 3D Settings
on 3D glasses before playing the 3D content.
Audio
3D Settings `` The player outputs 3D signals only through HDMI
Network
3D Blu-ray Playback Mode : Auto
cable connected to the HDMI OUT port.
System
Language Screen Size : 55 inch `` As the video resolution in 3D play mode is fixed
Security according to the resolution of the original 3D
General > Move " Enter ' Return
video, you can not change the resolution to your
Support HDMI Deep Color : Auto
preference.
`` Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
3D Blu-ray Playback Mode `` You must use a high-speed HDMI cable for proper
output of the 3D signal.
3D Blu-ray Discs are available in two formats: Blu-
ray 3D and 3D only. You can choose to watch a `` Stay at least three times the width of the screen
Blu-ray 3D disc in 3D or 2D mode before playing from the TV when watching 3D images. For example,
the disc. if you have a 46 inch screen, stay 138 inches (11.5
feet) from the screen.
• Auto : Automatically detect if a connected TV
has 3D capability and play a Blu-ray 3D disc in -- Place the 3D video screen at eye level for the
3D or 2D accordingly or a 3D only disc in 3D if best 3D picture.
the TV supports 3D. `` When the player is connected to some 3D devices,
3D only discs will not be played if your TV does the 3D effect may not function properly.
not support 3D. `` “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks
• 3D 3D : Play 3D only and Blu-ray 3D discs in of the Blu-ray Disc Association.
3D mode at all times.
• 3D 2D : Play Blu-ray 3D discs in 2D mode at
all times. 3D only discs will not be played.
✎✎ NOTE
`` For some 3D discs, to stop a movie during 3D
playback, press the STOP ( ) button once. The
movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the STOP ( ) button
once. The Blu-ray menu appears. Press the STOP
( ) button again, then select 3D Settings in the
Blu-ray menu.
`` Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
32 English
05
Depending on the type of television you have, you BD Wise is Samsung’s latest inter-connectivity
Setup
may want to adjust the screen size setting. feature.
• 16:9 Original : Select when you connect the When you connect a Samsung player and a
player to a 16:9 TV screen. The player will Samsung TV with BD Wise to each other via
display all content in its original aspect ratio. HDMI, and BD Wise is on in both the player and
Content formatted in 4:3 will be displayed with TV, the player outputs video at the video resolution
black bars on the left and right. and frame rate of the Blu-ray Disc/DVDs.
• 16:9 Full : Select when you connect the player • Off : The output resolution stays fixed at the
to a 16:9 TV screen. All content will fill the resolution you set previously in the Resolution
full screen. Content formatted in 4:3 will be menu, regardless of the resolution of the disc.
stretched. See Resolution below.
• 4:3 Letter Box : Select when you connect the • On : The player outputs video at the original
player to a 4:3 TV screen. The player will display resolution and frame rate of the Blu-ray Disc/
all content in its original aspect ratio. Content DVDs.
formatted in 16:9 will be displayed with black
bars on the top and bottom.
✎✎ NOTE
`` When BD Wise is on, the Resolution setting
• 4:3 Pan-Scan : Select when you connect the
automatically defaults to BD Wise and BD Wise
player to a 4:3 TV screen. 16:9 content will have
appears in the Resolution menu.
the extreme left and right portions cut off.
✎✎ NOTE
`` If the player is connected to a device that does not
support BD Wise, you can not use the BD Wise
`` Depending on the disc type, some aspect ratios may function.
not be available.
`` For proper operation of BD Wise, set the BD Wise
`` If you select an aspect ratio and option which is menu of both the player and the TV to On.
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted. Resolution
`` If you select the 16:9 Original, your TV may display
4:3 Pillarbox (black bars on sides of picture). Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p, 480p,
or 480i. The number indicates the number of lines
Smart Hub Screen Size of video per frame. The i and p indicate interlaced
and progressive scan, respectively. The more
Set the Smart Hub Screen to the optimal size.
lines, the higher the quality.
• Size 1 : Smart Hub screen size will be smaller
• Auto : Automatically sets the output resolution
than default. You may see some black on sides
to the connected TV’s maximum resolution.
of screen.
• BD Wise : Automatically sets the resolution to
• Size 2 : This is the default setting for Smart
the resolution of the Blu-ray Disc/DVDs if you
Hub. The player displays the normal Smart Hub
have connected the player via HDMI to a TV
screen size.
with the BD Wise feature. (The BD Wise menu
• Size 3 : This will display a larger Smart Hub item appears only if BD Wise is set to On. See
screen size. The image may be too large for BD Wise above.)
your TV screen.
• 1080p : Outputs 1080 lines of progressive
video.
• 1080i : Outputs 1080 lines of interlaced video.
• 720p : Outputs 720 lines of progressive video.
• 480p : Outputs 480 lines of progressive video.
• 480i : Outputs 480 lines of interlaced video.
English 31
• DVD playback
34 English
05
`` If the TV you connected to the player does not
support Movie Frame or the resolution you selected, Lets you set the color space format for HDMI
Setup
the message “If no pictures are shown after output to match the capabilities of the connected
selecting ‘Yes’, please wait for 15 seconds to return device (TV, monitor, etc).
to the previous resolution. Do you want to change • Auto : Automatically sets the player to the
the resolution?” appears. optimum format supported by your device.
If you select Yes, the TV’s screen will go blank for • YCbCr (4:4:4) : If your TV supports the YCbCr
15 seconds, and then the resolution will revert to the color space via HDMI, select this to output the
previous resolution automatically. normal YCbCr color gamut.
`` If the screen stays blank after you have changed the • RGB (Standard) : Select this to output the
resolution, remove all discs, and then press and hold normal RGB color gamut.
the STOP ( ) button on the top of the player for • RGB (Enhanced) : If you have connected the
more than 5 seconds. All settings are restored to the player to a DVI display device such as a monitor,
factory default. Follow the steps on the previous page select this to output the enhanced RGB color
to access each mode and select the Display Setup gamut.
that your TV will support.
`` When the factory default settings are restored, all Movie Frame (24Fs)
stored user BD data is deleted.
`` The Blu-ray Disc must have the 24 frame feature for Setting the Movie Frame (24Fs) feature to Auto
the player to use the Movie Frame (24Fs) mode. allows you to adjust the player’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. You can select
Movie Frame only when the player is in the HDMI
1080i or 1080p output resolution modes.
• Auto : Movie Frame (24Fs) functions work.
• Off : Movie Frame (24Fs) functions are off.
English 31
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
• Auto : Select to have the player automatically
select the best picture quality for the DVD you’re
watching.
• Video : Select for the best picture quality from
concert or TV show DVDs.
36 English
05
Bitstream Bitstream
Bitstream
Setup
Setup PCM (Re-encoded (Re-encoded
(Unprocessed)
DTS) Dolby D)
HDMI HDMI HDMI supported HDMI supported
Connection supported Optical supported Optical AV receiver or AV receiver or
AV receiver AV receiver Optical Optical
Up to PCM Re-encoded
PCM PCM 2ch PCM PCM 2ch DTS re-encoded
7.1ch Dolby Digital *
Up to PCM Re-encoded
Dolby Digital PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
7.1ch Dolby Digital *
Dolby Digital Up to PCM Dolby Digital Re-encoded
PCM 2ch Dolby Digital DTS re-encoded
Plus 7.1ch Plus Dolby Digital *
Audio Stream Up to PCM Re-encoded
Dolby TrueHD PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
on Blu-ray 7.1ch Dolby Digital *
Disc Up to PCM Re-encoded
DTS PCM 2ch DTS DTS DTS re-encoded
6.1ch Dolby Digital *
DTS-HD High DTS-HD High
Up to PCM Re-encoded
Resolution PCM 2ch Resolution DTS DTS re-encoded
7.1ch Dolby Digital *
Audio Audio
DTS-HD Up to PCM DTS-HD Re-encoded
PCM 2ch DTS DTS re-encoded
Master Audio 7.1ch Master Audio Dolby Digital *
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Up to PCM
Audio Stream Dolby Digital PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
5.1ch
on DVD
Up to PCM
DTS PCM 2ch DTS DTS DTS DTS
6.1ch
Decodes the main Decodes main
feature audio and feature audio and
Outputs only the main BONUSVIEW audio BONUSVIEW audio
Decodes the main feature feature audio stream so that stream together stream together
Definition for audio and BONUSVIEW your AV receiver can decode into PCM audio and into PCM audio
Any audio stream together the audio bitstream. adds Navigation and add Navigation
Blu-ray Disc into PCM audio and adds You will not hear Sound Effects, then Sound Effects, then
Navigation Sound Effects. BONUSVIEW audio or re-encodes the reencodes the PCM
Navigation Sound Effects. PCM audio into DTS audio into Dolby
bitstream. digital bitstream.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
English 31
38 English
05
In some cases when the player is connected to a
Setting Up a Wired Connection - Auto
Setup
digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the 1. Press the ▲▼ buttons to select Wired.
audio delay time to match the video signal.
• You can set the audio delay time between 0
Settings
msec and 200 msec. Network Settings
Display
Adjust it to the optimal setting. Audio Select a network connection type.
✎✎ NOTE Network
System
Wired
Wireless
`` The audio delay time you specify may not be exact Language
(General)
Connect to the network using LAN cable. Please make
WPS(PBC)
depending on the played content. Security
One Foot
sure that the LAN cable is connected.
General Connection
Support
> Move " Enter ' Return
Network
English 31
To enter the Network settings into your player, You can setup a wireless network three ways:
follow these steps: • Wireless (General)
1. Press the ▲▼ buttons to select Wired, and • Using WPS(PBC)
then press the ENTER button. • One Foot Connection
2. Press the ◄► buttons to select IP Settings, Wireless (General) includes both Automatic and
and then press the ENTER button. Manual setup procedures.
3. On the Network Status screen, select Cancel,
Setting Up the Wireless Network Connection
and then press Enter.
- Auto
Most wireless networks have an optional security
Settings
IP Settings
system that requires devices that access the
Display
Audio IP Mode Manual
network to transmit an encrypted security code
Network IP Address 0 . 0 . 0 . 0 called an Access or Security Key. The Security
System Subnet Mask 0 . 0 . 0 . 0 Key is based on a Pass Phrase, typically a word
Gateway 0 . 0 . 0 . 0
Language
DNS Mode Manual
or a series of letters and numbers of a specified
Security
General
DNS Server 0 . 0 . 0 . 0 length you were asked to enter when you set up
Support
OK security for your wireless network. If you use this
> Move " Enter ' Return
method of setting up the network connection, and
have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the Auto
setup process.
4. Press the ENTER button to select IP Mode.
5. Press the ▲▼ buttons to select Manual, and 1. Press the ▲▼ buttons to select Wireless
then press the ENTER button. (General).
40 English
05
network, and then press the ENTER button.
The Security screen appears. 1. Click the Network icon on the bottom right of
Setup
the Windows desktop.
4. On the Security screen, enter your network’s
Pass Phrase. Enter numbers directly using your 2. In the pop-up menu, click Network and
remote control. Sharing Center.
To select a letter, press the ▲▼◄► buttons to 3. On the dialog that appears, click the Local
move the cursor, then press the ENTER button. Area Connection or Wireless Network
Connection depending on your network
connection.
Settings
Display Network Settings
4. On the Support tab, click the Details button.
Audio Enter security key. 0 entered The Network settings are displayed.
Network
System
a b c d e f 1 2 3 ✎✎ NOTE
g h i j k l 4 5 6
Language
m n o p q r 7 8 9
`` Depending on your Windows version, the information
Security
s t u v w x y z 0 may differ.
General
a/A * Delete Space Done
Support a Previous m Move " Enter ' Return
To enter the Network settings into your player,
follow these steps:
1. Follow Steps 1 through 4 in the ‘Setting Up
✎✎ NOTE the Wireless Network Connection - Auto’
procedure.
`` You should be able to find the Pass Phrase on one of
the set up screens you used to set up your router or 2. When done, press the GREEN (B) button on
modem. your remote, or press the ▲▼◄► buttons to
move the cursor to Done, and then press the
5. When done, press the GREEN (B) button on ENTER button. The Network Status screen
your remote, or press the ▲▼◄► buttons to appears.
move the cursor to Done, and then press the
ENTER button.
Settings
The Network Status screen appears. The IP Settings
Display
player connects to the network after the Audio IP Mode Manual
network connection is verified. Network IP Address 0 . 0 . 0 . 0
System Subnet Mask 0 . 0 . 0 . 0
English 31
Language
Internet is connected successfully.
within two minutes. Your player automatically Security
If you have a problem using any Internet services, contact your Internet service
provider.
acquires all the network settings values it General
needs and connects to your network. Support Network Settings IP Settings Retry OK
< Move " Enter ' Return
4. The Network Status screen appears. The
player connects to the network after the
network connection is verified.
42 English
05
`` This function is not available if the HDMI cable does
Set to allow or prohibit an Internet connection not support CEC.
Setup
when you use the BD-LIVE service.
`` If your Samsung TV has an Anynet+ logo, then it
• Allow (All) : The Internet connection is allowed
supports the Anynet+ function.
for all BD-LIVE contents.
• Allow (Valid Only) : The Internet connection is `` Depending on your TV, certain HDMI output
allowed only for BD-LIVE contents containing a resolutions may not work.
valid certificate. Please refer to the user manual of your TV.
• Prohibit : No Internet connection is allowed for
any BD-LIVE content. BD Data Management
✎✎ NOTE Lets you manage the downloaded contents you
`` What is a valid certificate? accessed through a Blu-ray Disc that supports the
When the player uses BD-LIVE to send the disc data BD-LIVE service and stored on an attached Flash
and a request to the server to certify the disc, the memory device.
server uses the transmitted data to check if the disc is
valid and sends the certificate back to the player. You can check the device’s information including
the storage size, delete the BD data, or change
`` The Internet connection may be restricted while you
the Flash memory device.
are using BD-LIVE contents.
Change Device allows you to select either the
player’s Internal Memory or External Memory
System (connected USB Device).
If the data to be stored from BD-LIVE is greater
Initial Settings than the size of the remaining memory or the
Internal Memory is full, connect an External USB
By using the Initial Settings function, you can set device, then select External Device in the menu.
the language, Network Settings, etc.
For more information about the Initial Settings BD Data Management Screen Information :
function, refer to the Initial Settings section of this • Total Size : Total memory size of the device.
user manual. (See pages 30~47)
• Available Size : Available memory in the device.
Anynet+(HDMI-CEC) ✎✎ NOTE
`` In the external memory mode, disc playback may
Anynet+ is a convenient function that offers linked be stopped if you disconnect the USB device in the
operations with other Samsung players that have middle of playback.
the Anynet+ feature. `` Only those USB devices formatted in FAT file
To operate this function, connect this player to a system (DOS 8.3 volume label) are supported. We
Samsung TV with an HDMI cable. recommend you use USB devices that support USB
With Anynet+ on, you can operate this player 2.0 protocol with 4 MB/sec or faster read/write
using a Samsung TV remote control and start speed.
disc playback simply by pressing the PLAY ( )
`` The Resume Play function may not work after you
button on the TV’s remote control.
format the storage device.
For more information, please see the TV user
manual. `` The total memory available to BD Data Management
• Off : Anynet+ functions will not work. may differ, depending on the conditions.
• On : Anynet+ functions will work.
English 31
You can specify the time zone that is applicable to This function works in conjunction with Blu-ray
your area. Disc/DVDs that have been assigned an age rating
or numeric rating that indicates the maturity level
of the content. These numbers help you control
Settings
Time Zone the types of Blu-ray Disc/DVDs that your family
Display
Audio
can watch.
Network Select an age rating you want to set for the BD
System
Parental Rating and a rating level you want to set
Language
Security
for the DVD Parental Rating. The player will only
General GMT + 00:00 play Blu-ray Discs rated at or below the age rating
Support
London, Lisbon, Casablanca
and DVDs rated below the numeric rating unless
< Change " Save ' Return
the password is entered.
Larger numbers indicate more mature content.
You can select the language you prefer for the If you forgot your password
Home menu, disc menu, etc.
• On-Screen Menu : Select the language for the 1. Remove the disc.
on-screen displays.
2. Press and hold the STOP ( ) button on the
• Disc Menu : Select the language for the disc
menu displays. top panel for 5 seconds or more.
All settings will revert to the factory settings.
• Audio : Select the language for disc audio.
• Subtitle : Select the language for disc subtitles. ✎✎ NOTE
✎✎ NOTE `` When the factory default settings are restored, all
`` The selected language will only appear if it is the user stored BD data will be deleted.
supported on the disc.
44 English
05
Front Display Software Upgrade
Setup
Change the brightness of the top panel. The Software Upgrade menu allows you to
• Auto : Dim during playback. upgrade the player’s software for performance
• Dim : Dim the display window. improvements or additional services.
• Bright : Brighten the display window.
By Internet
To upgrade by Internet, follow these steps:
Light Effect
1. Select By Internet, and then press the
You can adjust the light effect on the player. ENTER button. The Connecting to Server
• Always On : Activate Light Effect at all times. message appears.
It is recommended for continuous display for 2. If there is a download available, the Download
commercial or demonstration use. pop-up appears with a progress bar and the
• Auto : Activate Light Effect when you turn the download starts.
player on or off and when you insert or eject a 3. When the download is complete, the Upgrade
disc. This is recommended for home use. Query window appears with three choices:
• Off : Turn Light off. Upgrade Now, Upgrade Later, or Don’t
Upgrade.
Network Remote Control 4. If you select Upgrade Now, the player
upgrades the software, turns off, and then
The Network Remote Control function lets you turns on automatically.
control your Blu-ray Disc player from a remote
5. If you do not make a selection in one minute
device such as a smart phone through a wireless
or select Upgrade Later, the player stores
connection to your local area network.
the new upgrade software. You can upgrade
To use the Network Remote Control function, the software later using the By Downloaded
follow these steps: function.
1. Select On in the Network Remote Control 6. If you select Don’t Upgrade, the player
menu. cancels the upgrade.
2. Install the Samsung network remote control
application to control your player on your ✎✎ NOTE
compatible portable device. `` Your player must be connected to the Internet to use
the By Internet function.
3. Make sure your portable device and your
player are connected to the same wireless `` The upgrade is complete when the player turns off,
router. and then turns on again by itself.
4. Start the application on your portable device. `` Never turn the player off or back on manually during
The application should find your player and the update process.
display it on a list.
5. Select the player.
6. If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the player. Select Allow.
7. Follow the instructions that came with the
application to control the player.
English 31
46 English
05
steps:
1. Press the ▲▼ buttons to select Download in
Setup
Standby Mode, and then press the ENTER
button.
2. Select On or Off.
• Off : If you select Off, the player will notify
you with a pop up message when new
upgrade software is available.
• On : If you select On, the player will
automatically download new upgrade
software when it is in Standby mode with
the power off. If it downloads new upgrade
software, the player will ask you if you want
to install it when you turn the player on.
✎✎ NOTE
`` To use the Download in Standby Mode function, your
player must be connected to the Internet.
Contact Samsung
Provides contact information for assistance with
your player.
English 31
48 English
06
The content of discs are usually divided as shown
Z
Basic Functions
below.
• Blu-ray Disc, DVD-VIDEO 1. During playback, press the TITLE
MENU button on the remote control.
title 1 title 2 2. Press the ▲▼◄► buttons to make
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3 the desired selection, then press the ENTER
button.
✎✎ NOTE
`` Depending on the disc, the menu items may differ
• Audio CD (CD-DA) and this menu may not be available.
z
1. During playback, press the DISC
• MP3, WMA, DivX, MKV and MP4 MENU or TITLE MENU button.
2. Press the ▲▼ buttons to select an
folder (group) 1 folder (group) 2 entry you want to play from the Title
file 1 file 2 file 1 file 2 file 3 List, and then press the ENTER
button.
✎✎ NOTE
`` If your disc has a playlist, press the GREEN (B) button
to go to the playlist.
Using the Disc Menu/Title Menu/
Popup Menu Using the Popup Menu
✎✎ NOTE
`` Depending on the disc, the menu items may differ
and this menu may not be available.
English 49
50 English
06
During playback, you can operate the disc
Slow Motion Play
Basic Functions
menu by pressing the TOOLS button.
✎✎ NOTE
BONUSVIEW Video : Off
BONUSVIEW Audio : 0/1 Off
`` The player does not play sound in Slow mode. < Change " Enter ' Return
English 49
Selecting the Audio Language 1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Subtitle.
hzZx 3. Press the ◄► buttons to select the desired
subtitle language.
You can also operate this function by
pressing the AUDIO button on the ✎✎ NOTE
remote control. `` Depending on the Blu-ray Disc / DVD, you may be
able to change the desired subtitle in the Disc Menu.
Press the DISC MENU button.
1. During playback, press the TOOLS button.
`` This function depends on the selection of subtitles
2. Press the ▲▼ buttons to select Audio.
that are encoded on the disc and may not be
3. Press the ◄► buttons to select the desired available on all Blu-ray Discs/DVDs.
audio language.
`` A Blu-ray Disc can contain up to 255 subtitle
✎✎ NOTE languages and a DVD up to 32.
`` The ◄► indicator will not appear on the screen `` Information about the main feature/BONUSVIEW
if the BONUSVIEW section does not contain any mode will also appear if the Blu-ray Disc has a
BONUSVIEW audio settings. BONUSVIEW section.
52 English
06
secondary subtitles at the same time.
`` The total numbers of primary and secondary ow
Basic Functions
subtitles are displayed respectively.
`` If you press the SUBTITLE button on the remote Playing an Audio CD (CD-DA)/MP3
control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar. 1. Insert an Audio CD (CD-DA) or an MP3 Disc.
• For an Audio CD (CD-DA), the first track
plays automatically.
Changing the Camera Angle
• For an MP3 disc, press the ▲▼ buttons to
select Music, then press the ENTER button
hZ on the connected device popup.
When a Blu-ray Disc/DVD contains multiple angles Press the ENTER button.
of a particular scene, you can use the ANGLE
function. Audio CD (CD-DA)/MP3 Screen Elements
1. During playback, press the TOOLS button.
1 2 3
2. Press the ▲▼ buttons to select Angle.
3. Press the ◄► buttons to select the desired
Angle. Music
1/13
Setting BONUSVIEW
TRACK 001 TRACK 001
00:43
TRACK 002
03:56
h 7
TRACK 003
04:41
TRACK 004
English 49
TRACK 001
• For an MP3 disc, press the ▲▼ buttons TRACK 001
00:43
✎✎ NOTE
`` You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
54 English
06
(Enlarged up to 4 times)
G • Rotate : Select to rotate the picture. (This will
Basic Functions
rotate the picture either clockwise or counter
Playing a JPEG files clockwise.)
• Picture Settings : Select this if you want to
1. Insert a JPEG disc. adjust the picture quality.
• Information : Shows the picture information
2. Press the ▲▼ buttons to select Photos, and
including the name and size, etc.
then press the ENTER button.
3. Press the ▲▼◄► buttons to select the folder ✎✎ NOTE
you want to play, and then press the ENTER `` To enable the background music function, the photo
button. file must be in the same storage media as the music
4. Press the ▲▼◄► buttons to select the photo file. However, the sound quality can be affected by
you want to play, and then press the ENTER the bit rate of the MP3 file, the size of the photo, and
button. the encoding method.
English 49
d WPS(PBC)
My Contents
Videos
Connected
PhotosDevice
Music
123
56 English
07
Smart Hub or BD-LIVE by connecting the player In a few cases, the Country screen appears
to your network. immediately after.
Network Services
4. If the Country screen has appeared, press the
Read the following instructions before using any
▲▼ buttons to select your country, then press
network service.
the ENTER button.
1. Connect the player to the network.
(See pages 26~27)
✎✎ NOTE
`` Certain applications are available only in certain
2. Configure the network settings.
countries.
(See pages 39~43)
5. The Terms of Service Agreement screen
appears.
Using Smart Hub If you want to agree, press the ◄► buttons
to select Agree, then press the ENTER
Using Smart Hub, you can stream movies, videos, button.
and music from the Internet, access various for ✎✎ NOTE
pay or free-of-charge applications and view them `` Screens can take a few seconds to appear.
on your TV. Application content includes news,
sports, weather forecasts, stock market quotes, 6. The Service Update screen appears and
maps, photos, and games. installs a number of services and applications.
When done, it closes. The applications and
You can also start this function by services downloaded are displayed on the
pressing the SMART HUB button on Smart Hub screen. This may take some time.
the remote control. ✎✎ NOTE
`` Smart Hub may close momentarily during the
installation process.
Starting Smart Hub for the First `` A number of screens may appear after installation.
Time You can press the ENTER button to close them or let
them close on their own.
To start Smart Hub for the first time, follow these
7. To start an application, press the ▲▼◄►
steps :
buttons to highlight a widget, then press the
1. Go to the Home menu. ENTER button.
My Contents
Videos
Photos
Music
d WPS(PBC)
English 57
Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 My Applications : Displays your personal gallery
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
7 of applications which you can add to, modify, and
Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 Contents 6 delete.
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
✎✎ NOTE
Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12
58 English
07
To delete text, move the cursor to the right of the
Through your remote, you can use the On-Screen character you want to delete, and then press the
Network Services
Keypad to enter letters, numbers, and symbols. AUDIO button. To change case or enter numbers
or punctuation, press the SUBTITLE button.
1 2 3 Creating an Account
.,– abc def
2 Shift
0
Delete 6 1. Press the RED (A) button on your remote
control. The Create Account screen appears.
T9 ab Ab AB 1
3
Login
Recommended
Smart TV ID Press [Enter] %
4 5 Password
Contents 1 Contents 2
Press
Contents 3
[Enter] xxxxxxxx
Contents 4 Contents 5
Press the SUBTITLE button on the remote control to a Login b Sort by c Edit Mode d Settings
Press the GREEN (B) button on the remote control then press the ENTER button.
4
to change the input method. (T9 or ABC) An entry screen and keypad appear.
4. Use the keypad to enter your e-mail address.
Press the TOOLS button on the remote control to This will serve as your ID.
5
✎✎ NOTE
change the language.
Press the AUDIO button on the remote control to `` The keypad works like the keypad on a cell phone.
6
delete a character.
5. When done, press the ENTER button to
select OK, and then press the ENTER button
Entering Text, Numbers and Symbols again. The Create Account screen re-appears.
To enter text, press the number button on the 6. Select Password, and then press the ENTER
remote that corresponds to the letter you want button. An entry screen and a keypad appear.
to enter. Press the button rapidly to enter a letter 7. Use the keypad to enter a password.
that is not the first letter listed on the On-Screen The password can be any combination of
keypad button. For example, if you want to enter letters, numbers, and symbols.
✎✎ NOTE
the letter b, press the 2 button on your remote
rapidly twice. To enter the first letter listed on a
button, press, release, and then wait. `` Press the RED (A) button on your remote to show or
hide the password as you enter it.
English 59
60 English
07
If you have existing accounts with any of the The Change Password function lets you change
providers listed by the Register Service Account your Smart Hub password. To change the
Network Services
function, you can associate the provider account password, follow these steps:
and the provider account password with your
1. Select Change Password, and then press
Smart TV Account. If you associate the account,
the ENTER button.
you will be able to log onto the account through
Smart Hub easily, without entering your account 2. Enter your current password. The next screen
name or password. appears.
To use the Register Service Account function, 3. On the next screen, enter a new password on
follow these steps: the first line. Enter it again on the second line
to confirm.
1. In the Account Management menu, select
Register Service Account, and then press the 4. The Changing Password Complete message
ENTER button. The Register Service Account screen appears. Press the ENTER button
Window appears. or wait for the screen to close - about 5
seconds.
2. Press the ▲▼ buttons to select a Service
Provider you want to associate with your Remove from TV Account list
Smart TV Account, and then press the
ENTER button. The Remove Service Accounts function cancels
✎✎ NOTE
all your current registered Service Accounts that
you registered on the Register Service Account
`` If you have a Samsung apps account and you want screen.
to use the Samsung Apps function in Smart Hub, you
must register your Samsung Apps account here. See Deactivate Account
pages 64~66 for more information.
The Deactivate Account function deactivates
3. Press the ▲▼ buttons to select Register, and your Smart TV Account and deletes it and all your
then using your remote and the on-screen account settings entirely from Smart Hub.
Keypad, enter your site ID and password.
When done, press the ENTER button. Reset
✎✎ NOTE The Reset function initializes all downloaded
`` This is the ID and password you normally use to widgets, erases all user accounts and settings
access your account on this site. from the player, and resets all Smart Hub settings
4. If you have entered the ID and password to the factory default settings. It then restarts
correctly, the Registered Successfully Smart Hub as if it were starting for the first time.
message appears. Your account, however, remains on the Smart
Hub server. To log into your account, enter your
5. If you pressed OK, repeat Steps 2 through 4 ID and password on the Create Account screen.
to associate another Service Provider.
To use the Reset function, follow these steps:
6. When you are done, press the RETURN
button. 1. In the Settings menu, select Reset, and then
press the ENTER button.
The Reset screen appears.
2. Enter the your Security password. This is the
password you entered if you set up a BD or
DVD Parental rating (See page 44). If you did
not, enter 0000.
English 61
62 English
07
1. Close the Edit Mode menu. The Rename Folder function lets you rename
Network Services
2. In My Applications, press the ▲▼◄► to folders. To use the Rename Folder function, follow
select a folder, and then press the ENTER these steps:
button. The folder opens. 1. Press the YELLOW (C) button on your
3. Select a widget, and then press the ENTER remote.
button. The widget’s application or service 2. Press the ▲▼◄► to select a folder, and then
starts. press the ENTER button.
To Edit Items in a Folder 3. Press the ▲▼◄► to select Rename Folder,
and then press the ENTER button. The Folder
Select a folder, and then press the ENTER button. Rename window and a keypad appears.
The folder opens.
4. Use the keypad to enter a new name, and
Press the YELLOW (C) button on your remote.
then press the ENTER button. The Rename
The Edit buttons appear at the bottom of the
window closes and the new name appears
screen.
below the folder.
These buttons work the same as the Edit Mode
menu buttons on the main screen. For example, Lock
to move a widget back to the My Applications
main screen: The Lock function lets you lock some widgets
in My Applications so they can not be opened
1. Select the widget.
without entering the Parental Security Code.
2. Select Move to Folder, and then press the To use the Lock function, follow these steps:
ENTER button. The Move to Folder window
appears. 1. Press the YELLOW (C) button on your
remote.
3. Select My Applications, and then press the
ENTER button. The Move to Folder window 2. Press the ▲▼◄► to select a widget, and
closes and the widget returns to the main My then press the ENTER button. If the widget
Applications screen. can be locked, the Lock menu item darkens.
3. Press the ▲▼◄► to select Lock, and then
New Folder press the ENTER button. The Lock Service
window appears.
The New Folder function lets you create and name
new folders. Once you have created a folder, you 4. Enter your Parental Security Code (See
can move widgets into it. To use the New Folder page 44). If you have not created a Parental
function, follow these steps: Security Code, enter 0000.
1. Press the YELLOW (C) button on your 5. Press the ENTER button. The Lock Service
remote. window appears confirming the lock, and
then closes. A lock symbol appears next to
2. Press the ▲▼◄► to move the cursor to New the widget.
Folder, and then press the ENTER button.
The New Folder window and a keypad
appear.
3. Use the keypad to enter the name of the
folder, and then press the ENTER button.
The New Folder screen closes and the New
Folder appears on the Smart Hub screen.
English 63
1. Press the YELLOW (C) button on your Samsung Apps lets you download for pay or free-
remote. of-charge applications and services to your Blu-ray
2. Press the ▲▼◄► to select a locked widget, Disc player and view or use them on your TV.
and then press the ENTER button. These applications and services include videos,
music, photos, games, news, sports, etc. Widgets
3. Press the ▲▼◄► to select Unlock, and then
for the new apps appear in My Applications.
press the ENTER button. The Lock Service
window appears. Additional applications and services are added
regularly.
4. Enter the Parental Security Code (See page
44). If you have not created a Parental
Security Code, enter 0000. For Pay Apps
5. Press the ENTER button. The Lock Service To download for pay apps, you need to create a
Released window appears confirming the lock Samsung Apps account and add a credit card to the
has been release, and then closes. account.
To create a Samsung Apps account, please visit
Delete
www.samsung.com
The Delete function lets you delete widgets from
My Applications. To use the Delete function, follow
✎✎ NOTE
these steps: `` This service may not provided in some countries.
1. Press the YELLOW (C) button on your Accessing the Samsung Apps Screen
remote.
2. Press the ▲▼◄► to select a widget, and To access Samsung Apps, press the ▲▼◄►
then press the ENTER button. buttons to navigate to the Samsung Apps area
on the Smart Hub main screen, and then press
3. Press the ▲▼◄► to select Delete, and then the ENTER button. The Samsung Apps screen
press the ENTER button. The message, “Do appears.
you want to delete selected item(s)?” appears.
4. Select Yes, and then press the ENTER ✎✎ NOTE
button. The widget is deleted. `` If this is the first time you are accessing this screen,
the terms of service window appears. If you want
to agree, select Agree, and then press the ENTER
The Sort Menu - GREEN (B) button.
The functions in the Sort Menu let you sort the
widgets in My Applications by Name, Date,
Frequency (of use), and Category. If you manually
change the position of a widget, the Sort Menu
automatically highlights User Defined when you
start it.
To sort the widgets in My Applications, follow
these steps:
1. Press the GREEN (B) button on your remote.
2. Press the ◄► to select a sorting method,
and then press the ENTER button. Smart
Hub sorts the widgets by the method you
have chosen.
64 English
07
To use the Samsung Apps screen, follow these The following categories are available:
Network Services
steps: • What’s New? : Displays newly registered
1. Press the ◄► buttons to move to the applications.
category list on the left. • Video : Displays various video media such as
movies, TV shows, and short length videos.
2. Press the ▲▼ to highlight a category. In a few
seconds, the Samsung Apps screen displays • Game : Displays various games such as sudoku
the applications in that category. The Sort and chess.
tabs appear across the top. • Sports : Displays various sports media services
such as match information, images, and short
3. Press the ► button to move to the displayed
length videos.
applications or services.
• Lifestyle : Includes various lifestyle media
4. Press the ▲▼◄► buttons to select an services such as music, personal photo
application or service, and then press the management tools, and social networking such
ENTER button. The Application Details screen as Facebook and Twitter.
appears describing the service or application.
• Information : Includes various information
5. Select Download Now, and then press the services such as news, stocks, and weather.
ENTER button. If the application or service is • Other : Includes other miscellaneous services.
free, it downloads and runs. If not, and there
is a fee, follow the directions on the screen to
complete the download.
My Account
English 65
BD-LIVE™
66 English
08
Before requesting service, please check the following.
Appendix
PROBLEM SOLUTION
No operation can be performed with the • Check the batteries in the remote control. They may need replacing.
remote control. • Operate the remote control at a distance of no more than 6.1m.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear. • Ensure that the disc has disc menus.
The prohibition message appears on the • This message appears when an invalid button is pressed.
screen. • The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu • Some of the functions selected in the Setup Menu may not work properly if
selection. the disc is not encoded with the corresponding function.
The screen ratio cannot be changed. • The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio. • Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blocked • If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the STOP ( ) button (on top panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
English 67
Forgot password • Press the STOP ( ) button (on top panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is
deleted.
If you experience other problems. • Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or distorted • Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output. • Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.
Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared through AllShare, • AllShare shows only files corresponding to the Image, Music, and Movie
but I cannot see the files. categories. Files that do not correspond to these categories may not be
displayed.
AllShare connection between player and PC • The IP address under the same subnetwork should be unique. If they are
is unstable. not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
68 English
08
BD-LIVE
Appendix
I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using the
Network Status menu. (See page 42)
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 43)
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
When using the BD-LIVE service, an error • The memory device must have at least 1GB of free space to accommodate
occurs. the BD-LIVE service.
You can check the available size in BD Data Management. (See page 43)
✎✎ NOTE
`` When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin any
work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.samsung.com,
or contact Samsung Customer Care before seeking to repair your player.
English 69
70 English
08
NOT ALL discs are compatible
Appendix
• Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and
CD-RW/-R discs.
• Discs other than the above cannot and/or is not intended to be played by this player. And some of the
above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
player operation issues with new and existing format discs are possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this player, and certain available features may be subject to
delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
-- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
-- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care center.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care center.
English 71
72 English
08
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
Appendix
are trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• DivX
-- ABOUT DIVX VIDEO : DivX® is a digital video format created by DivX, Inc.
This is an official DivX Certified® device that plays DivX video.
Visit www.divx.com for more information and software tools to convert your files into DivX video.
-- ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
-- DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.
-- Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
• This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
English 73
Area Contact Center Web Site Area Contact Center Web Site
` North America Serbia
0700 Samsung (0700 726
www.samsung.com
Canada 1-800-SAMSUNG (726-7864) www.samsung.com 7864)
Mexico 01-800-SAMSUNG (726-7864) www.samsung.com Slovakia 0800-SAMSUNG (726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Spain 902-1-SAMSUNG (902 172 678) www.samsung.com
` Latin America Sweden 0771 726 7864 (SAMSUNG) www.samsung.com
Argentine 0800-333-3733 www.samsung.com www.samsung.com/ch
0848-SAMSUNG (7267864,
Switzerland www.samsung.com/
Brazil 0800-124-421 / 4004-0000 www.samsung.com CHF 0.08/min)
ch_fr/(French)
Chile 800-SAMSUNG (726-7864) www.samsung.com U.k 0330 SAMSUNG (7267864) www.samsung.com
Colombia 01-8000112112 www.samsung.com Eire 0818 717100 www.samsung.com
Costa Rica 0-800-507-7267 www.samsung.com Lithuania 8-800-77777 www.samsung.com
Dominica 1-800-751-2676 www.samsung.com Latvia 8000-7267 www.samsung.com
Ecuador 1-800-10-7267 www.samsung.com Estonia 800-7267 www.samsung.com
El Salvador 800-6225 www.samsung.com ` CIS
Guatemala 1-800-299-0013 www.samsung.com Russia 8-800-555-55-55 www.samsung.com
Honduras 800-7919267 www.samsung.com Georgia 8-800-555-555 -
Jamaica 1-800-234-7267 www.samsung.com Armenia 0-800-05-555 -
Nicaragua 00-1800-5077267 www.samsung.com Azerbaijan 088-55-55-555 -
Panama 800-7267 www.samsung.com 8-10-800-500-55-500
Peru 0-800-777-08 www.samsung.com Kazakhstan www.samsung.com
(GSM: 7799)
Puerto Rico 1-800-682-3180 www.samsung.com Uzbekistan 8-10-800-500-55-500 www.samsung.com
Trinidad & Kyrgyzstan 00-800-500-55-500 www.samsung.com
1-800-SAMSUNG (726-7864) www.samsung.com
Tobago Tadjikistan 8-10-800-500-55-500 www.samsung.com
Venezuela 0-800-100-5303 www.samsung.com www.samsung.ua
` Europe Ukraine 0-800-502-000 www.samsung.com/
Albania 42 27 5755 - ua_ru
0810 - SAMSUNG (7267864, Belarus 810-800-500-55-500 -
Austria www.samsung.com
€ 0.07/min) Moldova 00-800-500-55-500 -
www.samsung.com/ ` Asia Pacific
be (Dutch) Australia 1300 362 603 www.samsung.com
Belgium 02-201-24-18
www.samsung.com/
be_fr (French) New Zealand 0800 SAMSUNG (0800 726 786) www.samsung.com
Bosnia 05 133 1999 - China 400-810-5858 / 010-6475 1880 www.samsung.com
Bulgaria 07001 33 11 www.samsung.com www.samsung.com/hk
Hong Kong (852) 3698 4698 www.samsung.com/
Croatia 062 SAMSUNG (062 726 7864) www.samsung.com hk_en/
800-SAMSUNG (800-726786) 3030 8282 / 1800 110011 /
Samsung Zrt., česká organizační India www.samsung.com
Czech www.samsung.com 1800 3000 8282 / 1800 266 8282
složka, Oasis Florenc, Soko- 0800-112-8888 /
lovská394/17, 180 00, Praha 8 Indonesia www.samsung.com
021-5699-7777
Denmark 70 70 19 70 www.samsung.com Japan 0120-327-527 www.samsung.com
Finland 030 - 6227 515 www.samsung.com Malaysia 1800-88-9999 www.samsung.com
France 01 48 63 00 00 www.samsung.com 1-800-10-SAMSUNG(726-7864) /
01805 - SAMSUNG (726-7864 1-800-3-SAMSUNG(726-7864) /
Germany www.samsung.com Philippines www.samsung.com
€ 0,14/Min) 1-800-8-SAMSUNG(726-7864) /
Hungary 06-80-SAMSUNG (726-7864) www.samsung.com 02-5805777
Italia 800-SAMSUNG (726-7864) www.samsung.com Singapore 1800-SAMSUNG (726-7864) www.samsung.com
Kosovo +381 0113216899 - Thailand 1800-29-3232 / 02-689-3232 www.samsung.com
Luxemburg 261 03 710 www.samsung.com Taiwan 0800-329-999 www.samsung.com
Macedonia 023 207 777 - Vietnam 1 800 588 889 www.samsung.com
Montenegro 020 405 888 - ` Middle East
0900-SAMSUNG Bahrain 8000-4726 www.samsung.com
Netherlands www.samsung.com
(0900-7267864) (€ 0,10/Min) Egypt 08000-726786 www.samsung.com
Norway 815-56 480 www.samsung.com Jordan 800-22273 www.samsung.com
0 801 1SAMSUNG (172678) Morocco 080 100 2255 www.samsung.com
Poland www.samsung.com
/ 022-607-93-33 Oman 800-SAMSUNG (726-7864) www.samsung.com
Portugal 80820-SAMSUNG (726-7864) www.samsung.com Saudi Arabia 9200-21230 www.samsung.com
1. 08010 SAMSUNG (72678) - Turkey 444 77 11 www.samsung.com
doar din reţeaua Romtelecom,
Rumania tarif local www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com
2. 021.206.01.10 - din orice ` Africa
reţea, tarif normal Nigeria 0800-SAMSUNG (726-7864) www.samsung.com
South Africa 0860-SAMSUNG (726-7864 ) www.samsung.com
2 Español
02
PARA REDUCIR EL PELIGRO DE DESCARGA ELÉCTRICA, NO RETIRE LA CUBIERTA.
Información de seguridad
NO HAY PIEZAS EN EL INTERIOR QUE PUEDA REPARAR EL USUARIO. CONSULTE AL PERSONAL
CUALIFICADO DE SERVICIO TÉCNICO.
PRECAUCIÓN
Riesgo de descarga eléctrica
No abriR
Un triángulo con un rayo y una punta de PRECAUCIÓN : PARA REDUCIR EL PELIGRO Un triángulo con un signo de exclamación
flecha es un símbolo de advertencia que DE DESCARGA ELÉCTRICA, NO RETIRE LA es un símbolo de advertencia que le alerta
alerta de “voltaje peligroso” dentro del CUBIERTA. NO HAY PIEZAS EN EL INTERIOR de que hay instrucciones importantes
producto. QUE PUEDA REPARAR EL USUARIO. relacionadas con el producto.
CONSULTE AL PERSONAL CUALIFICADO DE
SERVICIO TÉCNICO.
Español 3
4 Español
02
• No escriba en el lado impreso con bolígrafo ni
Manejo de discos
Información de seguridad
lápiz.
• No utilice pulverizadores de limpieza ni
Forma del disco antiestáticos para limpiar los discos. Tampoco
utilice productos químicos volátiles, como
• Utilice discos con formas benceno o disolvente.
regulares. Si utiliza un disco • No coloque etiquetas ni pegatinas en los discos.
irregular (un disco con una (No utilice discos que tengan cinta adhesiva
forma especial), puede dañar el reproductor. expuesta o restos de pegatinas.)
Sujeción de discos • No utilice protectores ni tapas antiarañazos.
• No utilice discos impresos con impresoras de
• Evite tocar la superficie del disco
etiquetas existentes en el mercado.
en la que se van a grabar datos.
• No cargue discos deformados ni agrietados.
Discos Blu-ray • Antes de conectar otros componentes a este
• No deje el disco Blu-ray en el reproductor reproductor, asegúrese de que estén apagados.
por mucho tiempo. Retire el disco Blu-ray del • No mueva el reproductor mientras se reproduce
reproductor y guárdelo en su funda. un disco. El disco puede rayarse o dañarse, y
• Tenga cuidado de no arañar ni dejar huellas en pueden dañarse componentes internos.
la superficie del disco Blu-ray. • No coloque sobre el reproductor recipientes
con líquido ni objetos pequeños metálicos.
DVD-VIDEO, CD de Audio (CD-DA) • Tenga cuidado de no colocar la mano en la
bandeja del disco.
• Elimine con un paño suave la suciedad o la
contaminación existente en el disco. • En la bandeja del disco no coloque nada que
no sea el disco.
Almacenamiento de discos • Interferencias de fuentes externas como
rayos y electricidad estática pueden afectar al
Tenga cuidado de no dañar el disco, ya que funcionamiento normal de este reproductor.
los datos de estos discos son enormemente Si esto ocurre, apague el reproductor y
vulnerables al entorno. enciéndala de nuevo con el botón POWER, o
• No los exponga a la luz directa del sol. bien desconecte y vuelva a conectar el cable
• Guárdelos en un área ventilada fresca. de alimentación de CA en la toma de CA. El
• Guárdelos verticalmente. reproductor funcionará con normalidad.
• Guárdelos en una funda de protección limpia. • Asegúrese de retirar el disco y apagar el
• Si traslada de forma repentina el reproductor de reproductor después de utilizarlo.
un lugar frío a un lugar cálido, es posible que se • Desconecte el cable de alimentación
produzca condensación en sus componentes de CA de la toma de CA cuando
y en la óptica, y provoque una reproducción no vaya a utilizar el reproductor por
anormal del disco. Si sucede, desenchufe largos períodos de tiempo.
el reproductor, espere dos horas y vuelva a • Para limpiar el disco, hágalo en línea recta
conectar el enchufe a la toma de corriente desde el interior al exterior del disco.
eléctrica. A continuación, inserte el disco e • No exponga el reproductor a líquidos.
intente reproducirlo de nuevo. • Cuando el enchufe de CA está conectado a
una toma de corriente, el reproductor seguirá
consumiendo energía (modo de espera) cuando
se apague.
Español 5
6 Español
ESPAÑOL
principales 2 Funciones del reproductor de discos Blu-ray
Información de 3 Advertencia
seguridad 4 Precauciones
4 Instrucciones importantes de seguridad
4 Visualización utilizando la función 3D
5 Almacenamiento y manejo de discos
5 Manejo de discos
Conexiones 22 Conexión a un TV
22 Caso 1: Conexión a un TV con cable HDMI
- La mejor calidad (Recomendado)
23 Caso 2: Conexión a un TV con un cable de Audio/
Video - Buena calidad
Español 7
8 Español
ESPAÑOL
43 Configuración inicial
43 Anynet+ (HDMI-CEC)
43 Gestión de datos BD
44 Zona horaria
44 Video de pago DivX®
44 Rest.
44 Idioma
44 Seguridad
44 Clasif. padres BD
44 Clasif. padres DVD
44 Cambiar contraseña
45 General
45 Panel frontal
45 Efecto de luz
45 Red de control remoto
45 Soporte técnico
45 Actualización del software
47 Contacto con Samsung
Español 9
10 Español
03
Tipos de disco y contenido que pueden reproducirse en el reproductor
Introducción
Término Logotipo Icono Definición
✎✎ NOTA
`` Quizá el reproductor no pueda reproducir CD-RW/-R y DVD-R en todos los casos debido al tipo de disco o al estado de
la grabación.
`` Si no se ha grabado correctamente un disco DVD-RW /-R en formato de video DVD, no se podrá reproducir.
`` El reproductor no reproducirá contenido grabado en un DVD-R con una velocidad de bits que supere los 10 Mbps.
`` El reproductor no reproducirá contenido grabado en un BD-R o un dispositivo USB con una velocidad de bits que
supere los 30 Mbps.
Español 11
12 Español
03
• Utilice un disco CD-RW/-R de 700 MB (80 minutos). Tanto los reproductores como los discos están
Introducción
Si es posible, no utilice ningún disco de 800 MB codificados por región. Estos códigos regionales
(90 minutos) o mayor, ya que puede que no se deben concordar para que el disco se reproduzca.
reproduzca el disco. De lo contrario, no se reproducirá.
• Si el disco CD-RW/-R no se grabó como una El número regional de este aparato viene indicado
sesión cerrada, es posible que sufra demoras al en el panel superior del reproductor.
reproducir desde el inicio del disco o es posible que
no se reproduzcan todos los archivos grabados. Código de
Tipo de disco Área
• Es posible que no puedan reproducirse con región
este reproductor algunos discos CD-RW/-R, Norteamérica, Centroamérica,
a
dependiendo del dispositivo que se utilizara para Sudamérica, Corea, Japón,
grabarlos. En el caso de contenido grabado en Taiwán, Hong Kong y Sureste
soporte de CD-RW/-R desde un CD para uso de Asia.
personal, la capacidad de reproducción puede
variar dependiendo del contenido y de los discos. Blu-ray Europa, Groenlandia, Territorios
b franceses, Oriente Próximo,
AVCHD (Advanced Video Codec High África, Australia y Nueva Zelanda.
Definition, Códec de video avanzado de
alta definición) c India, China, Rusia, Asia Central
y Sur.
• Este reproductor puede reproducir discos con
formato AVCHD. Estos discos se graban y se EE.UU., territorios de EE.UU. y
usan normalmente en videocámaras. 1 Canadá
• El formato AVCHD es un formato digital de alta
resolución para videocámaras. Europa, Japón, Oriente Próximo,
• El formato MPEG-4 AVC/H.264 comprime
2 Egipto, Sudáfrica, Groenlandia
imágenes con una eficacia mayor que el formato
Taiwán, Corea, Filipinas,
de compresión de imágenes convencional.
• Algunos discos AVCHD utilizan el formato
3 Indonesia, Hong Kong
“x.v.Color”. Este reproductor puede reproducir México, Sudamérica,
discos AVCHD que utilizan el formato “x.v.Color”. DVD-VIDEO
Centroamérica, Australia, Nueva
• “x.v.Color” es una marca comercial de Sony 4 Zelanda, Islas del Pacífico, El
Corporation. Caribe
• “AVCHD” y el logotipo de AVCHD son marcas
comerciales de Matsushita Electronic Industrial Rusia, Europa del Este, India,
Co., Ltd. y Sony Corporation. 5 mayor parte de África, Corea
del Norte, Mongolia
✎✎ NOTA
`` Es posible que algunos discos con formato AVCHD
no se reproduzcan, dependiendo de la condición de 6 China
grabación.
Los discos con formato AVCHD no tienen que finalizarse.
`` “x.v.Color” ofrece una gama de colores más amplia Copyright
que los discos DVD normales para videocámara.
©2011 Samsung Electronics Co.,Ltd.
`` Algunos discos con formato DivX, MKV y MP4 no Todos los derechos reservados. Ninguna parte de
se pueden reproducir, dependiendo de la resolución este manual del usuario pueden reproducirse o
de video y de la configuración de la velocidad de copiarse sin la autorización previa por escrito de
fotogramas. Samsung Electronics Co. Ltd.
Español 13
Velocidad de
Extensión de Velocidad en
Contenedor Códec de video Resolución fotogramas Códec de audio
archivo bits (Mbps)
(fps)
Divx 3.11/4.x/ MP3
1920x1080 6 ~ 30 8
5.1/6.0 AC3
*.avi AVI H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 DTS Core
DivX 3.11/4.x/ MP3
1920x1080 6 ~ 30 8
5.1/6.0 AC3
*.mkv MKV H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 DTS Core
14 Español
03
/5.1/6.0 AC3
*.asf ASF H.264 BP/MP/HP 1920x1080 6 ~ 30 25 LPCM
Introducción
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 ADPCM
Motion JPEG 1920x1080 6 ~ 30 8 WMA
*.wmv Window Media 6 ~ 30 25 WMA
ASF 1920x1080
Video v9
H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MP3
*.mp4 MP4 ADPCM
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 AAC
H.264 BP/MP/HP 1920x1080 6 ~ 30 25 ADPCM
*.3gp 3GPP AAC
MPEG4 SP/ASP 1920x1080 6 ~ 30 8 HE-AAC
MPEG2 1920x1080 24/25/30 30 AC3
*.vro VRO MPEG
VOB MPEG1 352 X 288 24/25/30 30 LPCM
MPEG1 352 X 288 24/25/30 30 AC3
*.mpg MPEG
PS MPEG2 1920x1080 24/25/30 30
*.mpeg LPCM
H.264 1920x1080 6 ~ 30 25 AAC
MPEG2 1920x1080 24/25/30 30 AC3
*.ts AAC
*.tp TS H.264 1920x1080 6 ~ 30 25 MP3
*.trp DD+
VC1 1920x1080 6 ~ 30 25 HE-AAC
Limitaciones
-- Incluso cuando el archivo esté codificado con un códec compatible mencionado anteriormente, es
posible que un archivo no pueda reproducirse si su contenido tiene un problema.
-- No se garantiza la reproducción normal si la información del contenedor de archivos es erróneo o el
archivo en sí está dañado.
-- Los archivos que tienen una velocidad de bits/fotogramas más alta que el estándar es posible que
funcione de forma interrumpida en la reproducción de sonido/video.
-- La función de búsqueda (salto) no está disponible si la tabla del índice del archivo está dañada.
-- Al reproducir un archivo de forma remota a través de la conexión de red, es posible que la reproducción
de video funcione de forma interrumpida dependiendo de la velocidad de red establecida.
Descodificador de video
-- Admite hasta H.264 Nivel 4.1
-- No admite H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 ni AVCHD
-- MPEG4 SP, ASP :
Por debajo de 1280 x 720: 60 fotogramas máx.
Por encima de 1280 x 720: 30 fotogramas máx.
-- No admite GMC 2 o superior
Descodificador de audio
-- Admite WMA 7, 8, 9 y STD
-- No admite WMA 9 PRO multicanal si el número de canales es más de 2.
-- No admite WMA 9 Lossless, voz.
-- No admite velocidad de muestreo WMA de 22050 Hz mono
-- No admite APDCM MULAW, ALAW
Español 15
Extensión de
Contenedor Códec de audio Rango de soporte
archivo
*.mp3 MP3 MP3 -
Compatible con WMA versión 10
* V elocidades de muestreo (en kHz) - 8, 11, 16, 22, 32, 44,1, 48
*.wma WMA WMA
* Velocidades de bits - Todas las velocidades de bits en el
rango de 5 kbps a 384 kbps
Accesorios
Soporte de pared / Soporte del equipo / Tornillo del soporte Conjunto Soporte-Base
16 Español
2D3D SOURCE
1 2 3
4 5 6
7 8 9
SUBTITLE AUDIO
Introducción
DISC MENU MENU TITLE MENU
POPUP
TOOLS INFO
RETURN EXIT
INTERNET@
SMART SEARCH REPEAT
HUB
79
MUTE
VOL CH
✎✎ NOTA
`` Utilice sólo el cable de audio/video que se facilita que se incluye con este reproductor.
Es posible que la salida de la señal procedente de la fuente externa no se genere correctamente si se utiliza el cable
de audio/video para la conexión.
Si pierde este cable, visite el centro de servicio técnico más cercano de Samsung para comprar el cable.
`` Asegúrese de instalar el reproductor sobre el suelo o en la pared.
Dejar el producto sobre el suelo puede causar averías en el mismo.
Panel superior
i b
d
c
g e
h
f
Español 17
3
SENSOR DE MANDO A
Detecta señales del mando a distancia.
DISTANCIA
Puede conectar aquí una tarjeta de memoria flash USB y utilizarla como
9
almacenamiento cuando el reproductor se conecta a BD-LIVE. También se puede
USB HOST
utilizar USB Host para actualizaciones de software y reproducción de MP3/JPEG/
DivX/MKV/MP4.
✎✎ NOTA
`` Puede realizar actualizaciones utilizando el conector USB Host sólo con una tarjeta de memoria flash USB.
`` Cuando el reproductor muestra el menú del disco Blu-ray, no es posible iniciar el video presionando el botón
Reproducir en el reproductor o en el mando a distancia. Para reproducir el video, debe seleccionar Reproducir video o
Inicio en el menú del disco y presionar el botón INTRO.
18 Español
03
Introducción
a
b
c
d
e
3 A/V OUT Se conecta la entrada del equipo externo utilizando un cable de audio/video.
5
Se utiliza para los servicios de red (consulte las páginas de la 57 a la 66), BD-LIVE
LAN
y actualizaciones de software que utilizan una conexión de red.
Español 19
TV
POWER POWER
Enciende y apaga el reproductor. Encienda y apague el TV.
(Para controlar el TV, consulte la página 21)
Para expulsar un disco. 2D3D SOURCE
Se presiona para saltar hacia adelante o Se presiona para buscar adelante o atrás
hacia atrás. en un disco.
Se presiona para detener un disco. Se presiona para detener temporalmente un disco.
Se usa para entrar en el menú del disco. DISC MENU MENU TITLE MENU Se presiona para reproducir el disco.
POPUP Se utiliza para entrar en el menú emergente
Se presiona para ir al menú de inicio. / menú de títulos.
TOOLS INFO
Se utiliza para ver la información de reproducción
Se presiona para usar el menú de durante la reproducción de un disco Blu-ray/DVD.
herramientas. Se utiliza para seleccionar las opciones de
menú y cambiar el valor del menú.
RETURN EXIT
Vuelve al menú anterior. Se presiona para salir del menú.
Silencia las bocinas del TV. Se utilizan para seleccionar el canal de TV.
03
controlar el TV
Marca Código Marca Código
Introducción
Con este mando a distancia puede controlar
NOBLEX TV POWER+66
algunas funciones de TV. SAMSUNG
TV POWER+01, +02,
+03, +04, +05, NOKIA TV POWER+74
+06, +07, +08, +09
Botón Función NORDMENDE
TV POWER+72, +73,
AIWA TV POWER+82 +75
TV POWER Para encender y apagar el televisor. TV POWER+53, +54,
TV POWER+10, +11, PANASONIC
+74, +75
Se utiliza para seleccionar una fuente ANAM +12, +13, +14,
TV SOURCE
externa conectada al TV. +15, +16, +17, +18
PHILIPS
TV POWER+06, +55,
+56, +57
Se utiliza para ajustar el volumen del BANG & OLUFSEN TV POWER+57
TV VOL (+/–) TV POWER+06, +56,
televisor. BLAUPUNKT TV POWER+71
PHONOLA
+57
Se utiliza para seleccionar el canal BRANDT TV POWER+73 TV POWER+58, +59,
TV CH (,/.) PIONEER
+73, +74
deseado. BRIONVEGA TV POWER+57
Se utiliza para activar o desactivar el CGE TV POWER+52 RADIOLA TV POWER+06, +56
TV MUTE
sonido. CONTINENTAL
TV POWER+75 RADIOMARELLI TV POWER+57
✎✎ NOTA
EDISON
RCA TV POWER+45, +46
TV POWER+19, +20,
+23, +24, +25, REX TV POWER+74
`` Las diversas funciones no estarán operativas DAEWOO +26, +27, +28,
necesariamente en todos los televisores. +29, +30, +31,
SABA
TV POWER+57, +72,
+32, +33, +34 +73, +74, +75
Si encuentra problemas, utilice el mando a distancia
EMERSON TV POWER+64
del TV. SALORA TV POWER+74
FERGUSON TV POWER+73
TV POWER+41, +42,
Para determinar si el televisor es compatible, FINLUX
TV POWER+06, +49,
+57
SANYO
+43, +44, +48
siga las instrucciones que se incluyen a
FORMENTI TV POWER+57 SCHNEIDER TV POWER+06
continuación.
FUJITSU TV POWER+84 SELECO TV POWER+74
1. Encienda el televisor. GRADIENTE TV POWER+70 TV POWER+36, +37,
SHARP
2. Apunte con el mando a distancia hacia el GRUNDIG
TV POWER+49, +52, +38, +39, +48
+71
televisor. SIEMENS TV POWER+71
TV POWER+60, +72,
3. Mantenga presionado el botón TV POWER e HITACHI
+73, +75 SINGER TV POWER+57
introduzca el código de dos dígitos de la tabla IMPERIAL TV POWER+52 SINUDYNE TV POWER+57
de la derecha que corresponda a la marca del JVC TV POWER+61, +79 SONY TV POWER+35, +48
televisor presionando los botones numéricos TV POWER+06, +19, TELEAVA TV POWER+73
apropiados. LG
+20, +21, +22, +78 TV POWER+67, +73,
TELEFUNKEN
Si el televisor es compatible con el mando a LOEWE TV POWER+06, +69 +75, +76
distancia, se apagará. LOEWE OPTA TV POWER+06, +57 THOMSON
TV POWER+72, +73,
El mando a distancia ya está programado MAGNAVOX TV POWER+40
+75
✎✎ NOTA
METZ TV POWER+57
TV POWER+06, +48, TV POWER+47, +48,
MITSUBISHI TOSHIBA
+62, +65 +49, +50, +51, +52
`` Si hay indicados varios códigos para la marca del
televisor, pruébelos uno tras otro hasta encontrar el MIVAR TV POWER+52, +77 WEGA TV POWER+57
Español 21
Cable HDMI
✎✎ NOTA
`` Un cable HDMI genera la salida de video/audio digital, por tanto no necesita el cable de audio.
`` Si el reproductor está conectado al televisor en el modo de salida HDMI 720p, 1080i o 1080p debe utilizar el cable
HDMI de alta velocidad (categoría 2).
`` HDMI genera únicamente una señal digital pura en el TV.
Si el TV no admite HDCP (Protección de contenido digital de ancho de banda alto), aparecen interferencias en pantalla.
`` Dependiendo del TV, es posible que no funcionen algunas resoluciones de salida de HDMI. Consulte el manual del
usuario del TV.
`` Cuando conecte el reproductor al televisor utilizando el cable HDMI por primera vez o a un nuevo televisor, la resolución
de salida HDMI se definirá automáticamente en la más alta proporcionada por el televisor.
`` Debe tener una conexión HDMI para disfrutar de videos con tecnología 3D.
`` Es posible que un cable HDMI largo pueda causar ruido en pantalla. Si esto ocurre, defina Color profundo en No.
`` Si utiliza el cable HDMI-a-DVI para conectar al dispositivo de visualización, también debe conectar AV OUT o Digital
Audio OUT al dispositivo de visualización o a un sistema de audio para escuchar el audio.
22 Español
04
calidad
Conexiones
1. Utilizando el cable de audio/video, conecte el terminal A/V OUT (amarillo) del reproductor a los
terminales VIDEO IN (amarillo) / AUDIO IN (rojo y blanco) del TV.
2. Encienda el reproductor y el TV.
3. Presione el selector de entrada del mando a distancia del TV hasta que aparezca la señal “VIDEO”
del reproductor en la pantalla del TV.
• Si ha configurado el mando a distancia de forma apropiada para controlar el TV (consulte la página
21), presione el botón TV SOURCE del mando a distancia y seleccione VIDEO como la fuente
externa del televisor.
✎✎ NOTA
`` Se generarán ruidos si el cable de audio se coloca demasiado cerca del cable de alimentación.
`` Para conectar a un receptor de AV, consulte las páginas de conexión del receptor de AV. (Consulte las páginas 24~25.)
`` El número y posición de los terminales de entrada pueden variar dependiendo del equipo de TV. Consulte el manual del
usuario del TV.
!! PRECAUCIÓN
`` No conecte el reproductor al TV a través del VCR. Las señales de video introducidas a través del VCR pueden verse
afectadas por los sistemas de protección de copyright y la imagen podría aparecer distorsionada en el televisor.
Español 23
• Procure bajar el volumen cuando encienda el receptor de AV. El sonido fuerte y repentino puede
dañar las bocinas y los oídos.
• Defina el formato de salida de audio según las capacidades del receptor de AV. (Consulte de la
página 36 a la 39.)
• La posición de los terminales de entrada HDMI puede variar dependiendo del receptor de AV.
Consulte el manual del usuario del receptor de AV.
Cable HDMI
Cable HDMI
24 Español
04
audio (receptor de AV con Dolby audio (Amplificador estéreo)
Digital o decodificador de DTS) - Buena calidad
Conexiones
- Mejor calidad
1. Utilizando el cable de audio/video, conecte el
terminal A/V OUT (amarillo) del reproductor a los
1. Utilizando un cable óptico, conecte el terminal
DIGITAL AUDIO OUT (OPTICAL) del terminales AUDIO IN (rojo y blanco) del equipo
reproductor al terminal DIGITAL AUDIO IN estéreo utilizando los cables rojo y blanco.
(OPTICAL) del receptor de AV. 2. Utilizando los cables de señal de video,
2. Utilizando los cables de señales de video, conecte el terminal HDMI del reproductor
conecte el terminal HDMI o A/V OUT del al terminal HDMI del TV o conecte el cable
reproductor al terminal HDMI o VIDEO IN del amarillo del cable de Audio/Video al terminal
TV. (Consulte las páginas 22 y 23.) AV IN del TV. (Consulte las páginas 22 y 23.)
3. Encienda el reproductor, el TV y el receptor 3. Encienda el reproductor, el TV y el amplificador
de AV. estéreo.
4. Presione el botón de selección de entrada del 4. Presione el botón de selección de entrada del
receptor de AV para seleccionar la entrada externa amplificador estéreo para seleccionar la entrada externa
para escuchar el sonido del reproductor. Consulte para escuchar el sonido del reproductor. Consulte el
el manual de usuario del receptor de audio para Manual de usuario de su amplificador estéreo para
ajustar la entrada de audio del receptor de AV. configurar la entrada de audio del amplificador estéreo.
5. Presione el selector de entrada del mando a 5. Presione el selector de entrada del mando a
distancia del TV para seleccionar la fuente de distancia del TV para seleccionar la fuente de
video (HDMI o Video.)
video (HDMI o Video.)
Caso 3: Cable de
Audio / Video
Rojo Blanco
✎✎ NOTA
`` Si utiliza la conexión de audio digital que se menciona en el Caso 2, sólo oirá las dos bocinas delanteros con el ajuste
de salida digital como PCM.
`` Para conectar al TV utilizando el cable de Audio/Video, es posible que tenga que conectar un cable alargador al cable de video
amarillo. Si utiliza un cable alargador, el cable debe tener un enchufe RCA macho en un extremo y un terminal RCA hembra en el otro.
Español 25
Este reproductor le permite utilizar los servicios de red (consulte de la página 57 a la 66) como Smart
Hub y BD-LIVE, y las actualizaciones de software cuando esté conectado a una red. Recomendamos
utilizar un AP (punto de acceso) o un enrutador de IP para la conexión. Para obtener información
adicional sobre las conexiones del enrutador, consulte el manual del usuario del enrutador o póngase en
contacto con el fabricante del enrutador para asistencia técnica.
Red de cable
1. Con un cable de LAN directo (Cable UTP), conecte el terminal LAN del reproductor al terminal LAN
del módem o del enrutador.
2. Para definir las opciones de red, consulte de la página 39 a la 43.
Enrutador
✎✎ NOTA
`` No se permite el acceso a Internet al servidor de actualización de software de Samsung, dependiendo del enrutador que
utilice o la política del proveedor de servicios de Internet. Para obtener información adicional, póngase en contacto con
el proveedor de servicios de Internet.
`` Para usuarios de DSL, utilice el enrutador para realizar una conexión de red.
`` Para utilizar la función AllShare, debe conectar la PC a la red como es muestra en la figura.
La conexión puede ser con cable o inalámbrica.
26 Español
04
El reproductor tiene la funcionalidad Wi-Fi integrada. Puede conectar a la red a través de un compartidor
Conexiones
de IP inalámbrico (un enrutador o un módem).
Para definir las opciones de red, consulte de la página 39 a la 43.
Servicio de
banda ancha
ed con PC para la
R Compartidor de IP
función AllShare inalámbrico
✎✎ NOTA
`` Para utilizar una red inalámbrica, el reproductor debe conectarse a un compartidor de IP inalámbrico (enrutador). Si
el compartidor de IP inalámbrico admite DHCP, el reproductor puede utilizar DHCP o una dirección IP estática para
conectar a la red inalámbrica.
`` Seleccione un canal para el compartidor de IP inalámbrico que no se esté actualmente utilizando. Si el canal
definido para el compartidor de IP inalámbrico lo está utilizando actualmente otro dispositivo cercano, esto provocará
interferencias y fallos en la comunicación.
`` Si se selecciona el modo puro de alto rendimiento (Greenfield) 802.11n y el tipo de cifrado se define en WEP, TKIP
o TKIPAES (WPS2Mixed) para su PA, este reproductor no admitirá una conexión en conformidad con las nuevas
especificaciones de certificación Wi-Fi.
`` Si el PA admite WPS (configuración de protección Wi-Fi), puede conectar a la red a través de PBC (configuración de
pulsador) o PIN (número de identificación personal). WPS configurará automáticamente la clave SSID y WPA en uno de
los modos.
`` Puede configurar una red inalámbrica de tres formas:
-- Inalámbrica (General)
-- Utilizando WPS(PBC)
-- One Foot Connection
Inalámbrica (General) incluye los procedimientos de configuración Automático y Manual.
`` La LAN inalámbrica, por su naturaleza, puede causar interferencias, dependiendo de las condiciones de servicio
(rendimiento AP, distancia, obstáculo, interferencia por otros dispositivos de radio, etc).
`` Defina el compartidor de IP inalámbrico en modo de Infraestructura. No se admite el modo Ad-hoc.
`` El reproductor sólo admite los siguientes protocolos de seguridad inalámbrica:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
`` Para utilizar la función AllShare, debe conectar la PC a la red como es muestra en la figura.
La conexión puede ser con cable o inalámbrica.
Español 27
Precauciones en la instalación
• Si instala el reproductor en una pared, la pared debe ser vertical y lisa.
• Evite instalar el reproductor en áreas con altas temperaturas o humedad o paredes que no soporten el
peso del equipo.
• Compruebe la solidez de la pared. Si la solidez de la pared no es suficiente para soportar el
reproductor, asegúrese de reforzar la pared antes de realizar la instalación.
• Compruebe la composición de la pared. Si la pared está hecha de yeso, mármol o planchas de hierro,
compre y utilice los tornillos de fijación y tacos apropiados.
• Conecte todos los cables de los dispositivos externos (TV, etc.) al reproductor antes de instalarlo.
• Si está instalando el reproductor en pladur, recomendamos colocar un espárrago detrás de la pared y
atornillar los tornillos en el espárrago.
• Para evitar descargas eléctricas, asegúrese de apagar el reproductor antes de instalarlo.
• No se cuelgue del reproductor instalado y evite que se golpee.
• Fije bien la unidad a la pared para que no se caiga. Si la unidad se cae, puede provocar lesiones
personales o daños en el producto.
• Si instala el reproductor en la pared, evite que los niños tiren de los cables de conexión, ya que puede
causar su caída.
28 Español
04
1. Inserte el soporte del equipo en la ranura inferior del reproductor de discos Blu-ray. Inserte los dos
Conexiones
tornillos como se muestra a continuación, y gírelos a la derecha para fijarlos.
2. Coloque el soporte de pared en la pared de forma que el lado de la flecha esté situado hacia arriba
y utilice los cuatro tornillos (no incluidos) para fijarlo a la pared. Introduzca los tornillos en tacos o
espárragos para fijar el soporte.
Después de instalar el Soporte del equipo, deslice e inserte el Reproductor de discos Blu-ray en la
ranura apropiada del soporte de pared.
✎✎ NOTA
`` No se incluyen los tornillos para el soporte de pared. Compre los tornillos (y tacos) apropiados para su pared.
Español 29
Configuración inicial.
Mi disposit. Internet Config.
✎✎ NOTA
Dansk Nederlands English
Eesti keel Suomi Français
Deutsch Ελληνικά Magyar
Indonesia Italiano 한국어 `` Cuando se conecta el reproductor al TV por primera
m Move " Enter vez, el reproductor se enciende automáticamente.
Este hecho es normal y no se trata de ningún
defecto.
`` El menú de inicio no aparecerá si no configura los
2. Presione los botones ▲▼◄► para
ajustes iniciales excepto en el caso que se indica a
seleccionar el idioma que desee y, a
continuación.
continuación, pulse el botón INTRO.
`` Si presiona el botón AZUL (D) durante la
3. Presione el botón INTRO para seleccionar
configuración de red, puede acceder al menú de
Iniciar.
inicio incluso sin completar la configuración de red.
4. Presione los botones ▲▼ para el formato de
`` Si desea ver de nuevo la pantalla de ajustes iniciales
TV que desee y, a continuación, presione el
para hacer cambios, seleccione la opción de reinicio.
botón INTRO. (Consulte la página 33.)
(Consulte la página 44.)
5. Presione los botones ▲▼ hasta seleccionar
`` Si utiliza el cable HDMI para conectar el reproductor
los ajustes de red que desee. Cable,
a un TV Samsung compatible con Anynet+ (HDMI-
Inalámb. (General), WPS(PBC) o One Foot
CEC) y 1. Ha definido la función Anynet+ (HDMI-CEC)
Connection y presione el botón INTRO.
en Encendido tanto en el TV como en el reproductor
Si no conoce los detalles de los ajustes de
y 2.) Ha definido el TV en un idioma admitido
red, presione el botón AZUL (D) del mando
por el reproductor, el reproductor seleccionará
a distancia para saltar los ajustes de red en
automáticamente dicho idioma como el idioma
este momento, finalice los ajustes iniciales y
preferente.
vaya al menú de inicio.
Si ha seleccionado un ajuste de red, vaya de `` Si deja el reproductor en modo de parada por más
la página 39 a la 43 para obtener información de 5 minutos sin usarse, se activará en el TV un
adicional sobre los ajustes de red. Una vez protector de pantalla. Si el reproductor se deja en
hecho, vaya al Paso 6. el modo de protector de pantalla por más de 20
minutos, se apagará automáticamente.
6. Aparece el menú de inicio. (Para obtener
información adicional sobre el menú de inicio,
consulte la página 31.)
30 Español
2D3D
BONUSVIEW SOURCE
1 2 3
4 5 6
7 8 9
SUBTITLE AUDIO
0
Acceso al menú Config. 2. Presione los botones ◄► hasta seleccionar
05
Config. y, a continuación, presione el botón
INTRO.
Configuración
DISC MENU MENU TITLE MENU
Seguridad
Videos General > Mover " Entrar ' Regresar
Fotos
Soporte técnico Color profundo HDMI : Auto
Música 2
3
Mi disposit. Internet Config.
Puede configurar diversas opciones de pantalla Permite introducir el tamaño de pantalla real del
como relación de aspecto de TV, resolución, etc. TV de forma que el reproductor pueda ajustar la
imagen de acuerdo con el tamaño de la pantalla y
Ajustes 3D mostrar una imagen 3D óptima.
(En pantallas 3D de más de 116 pulgadas, ajustar
Selecciona si reproducir un disco Blu-ray con simplemente como 116 también es una elección
contenido 3D en modo 3D. segura.)
!! PRECAUCIÓN
Config.
`` Si desea disfrutar del contenido 3D, conecte un
Pantalla Ajustes 3D
Audio
dispositivo 3D (receptor de AV o TV que admita 3D)
Red
Ajustes 3D
al puerto HDMI OUT del reproductor utilizando un
Sistema Modo rep. para 3D Blu-ray : Auto cable HDMI de alta velocidad. Colóquese las gafas
Tamaño pantalla : 55 pulgada
Idioma 3D antes de reproducir el contenido 3D.
Seguridad
General > Mover " Entrar ' Regresar `` El reproductor genera la salida de señales 3D sólo
Soporte técnico Color profundo HDMI : Auto a través del cable HDMI conectado al puerto HDMI
OUT.
`` Debido a que la resolución de video en el modo de
reproducción 3D es fija de acuerdo con la resolución
Modo rep. para 3D Blu-ray del video 3D original, no puede cambiar la resolución
a su gusto.
Los discos Blu-ray 3D están disponibles en dos
formatos: Blu-ray 3D y sólo 3D. Puede elegir ver `` Algunas funciones como BD Wise el ajuste del
un disco Blu-ray 3D en modo 3D o 2D antes de tamaño de la pantalla y el ajuste de la resolución es
reproducir el disco. posible que no funcionen correctamente en el modo
de reproducción 3D.
• Auto: Detecta automáticamente si el TV
conectado tiene capacidad 3D y reproduce un `` Debe utilizar un cable HDMI de alta velocidad para la
disco Blu-ray 3D en 3D o 2D según proceda o salida correcta de la señal 3D.
un disco sólo 3D en 3D si el TV admite 3D. `` Colóquese a una distancia de al menos tres veces
Los discos de sólo 3D no se reproducirán si el la anchura de la pantalla con respecto al TV al ver
TV no admite 3D. imágenes en 3D. Por ejemplo, si tiene una pantalla
• 3D 3D: Reproduce siempre discos sólo 3D y de 46 pulgadas, colóquese a 138 pulgadas (350
Blu-ray 3D en modo 3D. cm) de la pantalla.
• 3D 2D: Reproduce siempre discos Blu-ray
3D en modo 2D. Los discos sólo en 3D no se -- Coloque la pantalla de video 3D a la altura de los
reproducirán. ojos para conseguir la mejor imagen en 3D.
32 Español
05
Dependiendo del tipo de televisión, se puede BD Wise es la función de interconectividad más
Configuración
ajustar el ajuste de tamaño de la pantalla. reciente de Samsung.
• 16:9 original: se selecciona al conectar el Cuando conecte entre sí un reproductor Samsung
reproductor a una pantalla de TV de 16:9. El y un TV Samsung con BD Wise a través de HDMI,
reproductor mostrará todo el contenido con su y BD Wise esté activado en el reproductor y el
TV, el reproductor genera la salida de video con la
relación de aspecto original.
resolución y la velocidad de fotogramas del disco.
El contenido con formato 4:3 mostrará barras
• Apagado: La resolución de salida permanece
negras a la izquierda y a la derecha. fija con la resolución anteriormente definida en
• 16:9 Completo: se selecciona al conectar el el menú de resolución, independientemente de
reproductor a una pantalla de TV de 16:9. Todo la resolución del disco. Consulte la resolución a
el contenido llenará la pantalla. Se estrechará el continuación.
contenido con formato 4:3. • Encendido: El reproductor genera la salida de
• 4:3 Buzón: se selecciona al conectar el video con su resolución original y la velocidad
reproductor a una pantalla de TV de 4:3. de fotogramas del disco BD/DVD.
El reproductor mostrará todo el contenido en su ✎✎ NOTA
relación de aspecto original. El contenido con
`` Cuando BD Wise está activada, el ajuste de
formato 16:9 aparecerá con barras negras en la resolución se define por defecto en BD Wise y BD
parte superior e inferior. Wise aparece en el menú de resolución.
• 4:3 Pan-Scan: se selecciona al conectar el `` Si el reproductor se conecta a un dispositivo que no
reproductor a una pantalla de TV de 4:3. admite BD Wise, no puede utilizar la función BD Wise.
El contenido 16:9 tendrá cortados los extremos `` Para un funcionamiento apropiado de BD Wise,
izquierdo y derecho. defina tanto el menú BD Wise del reproductor como
✎✎ NOTA del TV en Encendido.
`` Dependiendo del tipo de disco, es posible que no
estén disponibles algunas relaciones de aspecto.
Resolución
`` Si selecciona una relación de aspecto y una opción Permite definir la resolución de salida de la
que sea diferente de la pantalla de televisión, es señal de video HDMI en Autom., 1080p, 1080i,
posible que la imagen aparezca distorsionada. 720p, 480p o 480i. El número indica el número
de líneas de video por fotograma. La i y la p
`` Si selecciona 16:9 Original, el TV mostrará 4:3 indican respectivamente el rastreo interlazado y
Pillarbox (barras negras en los lados de la imagen). progresivo. Cuanto más líneas, más alta será la
calidad.
• Auto: Define automáticamente la resolución de
Tamaño pantalla Smart Hub salida en la resolución máxima del TV conectado.
Ajuste la pantalla de Smart Hub con el tamaño • BD Wise: define automáticamente la resolución
óptimo. en la resolución del disco BD/DVD si ha
conectado el reproductor a través de HDMI a un
• Tamaño 1 : el tamaño de pantalla de Smart Hub TV con la función BD Wise. (La opción de menú
será más pequeño que el valor predeterminado. BD Wise sólo aparece si BD Wise se define en
Puede ver partes negras en los lados de la Encendido.) Consulte BD Wise anteriormente.)
pantalla. • 1080p: genera una salida de 1080 líneas de
• Tamaño 2 : este es el ajuste predeterminado de video progresivo.
Smart Hub. El reproductor muestra el tamaño • 1080i: genera una salida de 1080 líneas de
de pantalla normal de Smart Hub. video interlazado.
• Tamaño 3 : este mostrará un tamaño de • 720p: genera una salida de 720 líneas de video
Smart Hub más grande. La imagen puede ser progresivo.
demasiado grande para la pantalla de TV. • 480p: genera una salida de 480 líneas de video
progresivo.
• 480i: genera una salida de 480 líneas de video
interlazado.
Español 33
• Reproducción de DVD
34 Español
05
`` Si el TV conectado no admite Fotogr. Película o la
resolución seleccionada, aparecerá el mensaje “Si Permite definir el formato de espacio de color
Configuración
no aparecen imágenes después de seleccionar “Sí”, para la salida HDMI para que coincida con las
espere 15 segundos y regresará a la resolución capacidades del dispositivo conectado (TV,
anterior. ¿Desea cambiar la resolución?”. monitor, etc).
Si selecciona Sí, la pantalla del TV aparecerá en • Auto : define automáticamente el reproductor
blanco por 15 segundos y la resolución volverá en el formato óptimo admitido por el dispositivo.
automáticamente a la resolución anterior. • YCbCr(4:4:4) : si el TV admite el espacio de
`` Si la pantalla se queda en blanco después de haber color YCbCr a través de HDMI, se selecciona
cambiado la resolución, retire todos los discos y para general la salida con una cama de colores
mantenga presionado el botón PARAR ( ) en la YCbCr.
parte del reproductor por más de 5 segundos. Todos • RGB (Estándar) : se selecciona para generar la
los ajustes recuperan sus valores de fábrica. Siga salida con una gama de colores RGB normal.
los pasos de la página anterior para acceder a cada • RGB (Mejorado) : si ha conectado el
modo y seleccione la configuración de pantalla que reproductor a un dispositivo de visualización DVI
admita su televisor. como un monitor, se selecciona para generar la
`` Cuando se recuperan los ajustes predeterminados salida con una gama de colores RGB mejorada.
de fábrica, todos los datos de usuario almacenados
en la BD se borran. Fotograma (24Fs)
`` El disco Blu-ray debe tener la función de 24
fotogramas para poder utilizar en el reproductor el El ajuste de la función Fotograma (24Fs) en Auto
modo Fotogr. película (24Fs). le permite ajustar la salida HDMI del reproductor
en 24 fotogramas por segundo para obtener una
mejor calidad de imagen.
Puede disfrutar de la función Fotograma (24Fs)
sólo en un TV que admita esta velocidad de
fotogramas. Sólo puede seleccionar Fotogr.
Película cuando el reproductor esté en los modos
de resolución de salida HDMI 1080i o 1080p.
• Auto: estarán operativas las funciones de
Fotogr. Película (24 Fs).
• Apagado: no estarán operativas las funciones
de Fotogr. Película (24 Fs).
Español 35
36 Español
05
Bitstream Bitstream
Bitstream
Configuración
Configuración PCM (DTS (Dolby D
(sin procesar)
recodificado) Recodificado)
Receptor Receptor
Receptor de Receptor de AV
de AV que de AV que
Conexión Óptico Óptico AV que admita que admita HDMI
admita admita
HDMI u Óptico u Óptico
HDMI HDMI
Hasta PCM PCM 2 PCM 2 Dolby Digital
PCM PCM DTS recodificado
7,1 can. canales canales recodificado *
Hasta PCM PCM 2 Dolby Digital
Dolby Digital Dolby Digital Dolby Digital DTS recodificado
7,1 can. canales recodificado *
Dolby Digital Hasta PCM PCM 2 Dolby Digital Dolby Digital
Dolby Digital DTS recodificado
Plus 7,1 can. canales Plus recodificado *
Flujo de datos Hasta PCM PCM 2 Dolby Digital
Dolby TrueHD Dolby TrueHD Dolby Digital DTS recodificado
de audio en 7,1 can. canales recodificado *
disco Blu-ray Hasta PCM PCM 2 Dolby Digital
DTS DTS DTS DTS recodificado
6,1 can. canales recodificado *
DTS-HD High DTS-HD High
Hasta PCM PCM 2 Dolby Digital
Resolution Resolution DTS DTS recodificado
7,1 can. canales recodificado *
Audio Audio
DTS-HD Hasta PCM PCM 2 DTS-HD Dolby Digital
DTS DTS recodificado
Master Audio 7,1 can. canales Master Audio recodificado *
PCM PCM 2 canales PCM 2 canales PCM 2 canales PCM 2 canales PCM 2 canales PCM 2 canales
Flujo de datos Hasta PCM PCM 2
Dolby Digital Dolby Digital Dolby Digital Dolby Digital Dolby Digital
de audio en 5,1 can. canales
DVD Hasta PCM PCM 2
DTS DTS DTS DTS DTS
6,1 can. canales
Descodifica el Decodifica al mismo
audio de la función tiempo el audio de
Genera sólo la salida del principal y el flujo la función principal
Descodifica al mismo flujo de datos del audio de de datos de audio y el flujo de audio
tiempo el audio de la la función principal de forma de BONUSVIEW en BONUSVIEW en
Definición función principal y el que el receptor de AV pueda audio PCM y añade audio PCM y añade
para disco Cualquiera flujo de datos de audio descodificar el flujo de bits los efectos de sonido efectos de sonido
Blu-ray BONUSVIEW en audio de audio. de navegación, de navegación y, a
PCM y añade los efectos No oirá el audio de a continuación continuación, vuelve
de sonido de navegación. BONUSVIEW ni los efectos recodifica el audio a codificar el audio
de sonido de navegación. de PCM en flujo de PCM en flujo de bits
bits DTS. Dolby digital.
* Si el flujo de origen es de 2 canales o mono, no se aplica el ajuste de “Dolby D Recodificado”. La salida
será PCM de 2 canales.
Español 37
✎✎ NOTA
al equipo admite las funciones envolventes
virtuales como Dolby Pro Logic.
`` Incluso cuando el submuestreo de PCM se defina en
Apagado, algunos discos sólo generarán la salida Modo DTS Neo:6
de audio de submuestreo a través de las salidas
digitales ópticas. Puede disfrutar de sonido multicanal de un CD
de audio (CD-DA).
HDMI • Apagado: genera la salida de la señal de audio
de 2 canales sólo a través de las bocinas
• Si el TV no es compatible con los formatos
delanteras.
multicanal comprimidos (Dolby Digital, DTS),
es posible que el reproductor genere la salida • Cine: permite seleccionar reproducir sonido de
de audio submezcado PCM de 2 canales película de 2 canales sobre varios canales.
incluso aunque haya seleccionado Bitstream • Música: permite seleccionar reproducir música
(recodificado o sin procesar) en el menú de de de 2 canales sobre varios canales.
✎✎ NOTA
configuración.
• Si el TV no es compatible con velocidades de
muestreo PCM superiores a 48 kHz, es posible `` Si está utilizando un receptor de AV que admita
que el reproductor genere la salida de audio HDMI, esta opción está disponible cuando configure
de submuestreo PCM de 48 kHz aunque haya la salida digital como PCM.
definido Submuestreo PCM en Apagado.
38 Español
05
En algunos casos, el reproductor está conectado
Configuración de una conexión con cable
Configuración
a un TV digital, es posible que la señal de audio
no se sincronice con la señal de video. Si esto - Auto
ocurre, ajuste el tiempo de demora de audio para 1. Presione los botones ▲▼ para seleccionar
que coincida con la señal de video. Cable.
• Puede definir el tiempo de demora de audio
entre 0 mseg y 200 mseg. Config.
Ajústelo al valor óptimo. Pantalla Configuración de red
✎✎ NOTA Audio
Red
Seleccione un tipo de conexión de red.
Cable
`` El tiempo de demora de audio que especifique Sistema Inalámb.
(General)
es posible que no sea exacto dependiendo del Idioma
WPS(PBC)
Conéctese a la red con un cable LAN. Asegúrese de que
Seguridad el cable LAN esté conectado.
contenido reproducido. One Foot
General
Connection
Soporte técnico
> Mover " Entrar ' Regresar
Red
Español 39
40 Español
05
red que desee y, a continuación, presione el
botón INTRO. 1. Haga clic en el icono de Red en la parte
Configuración
Aparece la pantalla de seguridad. inferior derecha del escritorio de Windows.
4. En la pantalla de seguridad, introduzca la palabra 2. En el menú emergente, haga clic en
de acceso de red. Introduzca los números Configuración de red y compartir.
directamente utilizando el mando a distancia. 3. En el diálogo que aparece, haga clic en Conexión
Para seleccionar una letra, presione los botones de área local o Conexión de red inalámbrica
▲▼◄► para mover el cursor, y presione el dependiendo de su conexión de red.
botón INTRO.
4. En la ficha Soporte, haga clic en el botón
Config.
Detalles. Aparece la configuración de red.
Pantalla Configuración de red ✎✎ NOTA
Audio Ingrese clave de seguridad. O ingresado
Red
`` Dependiendo de la versión de Windows, es posible
Sistema
a b c d e f 1 2 3 que la información difiera.
g h i j k l 4 5 6
Idioma
Seguridad
m
s
n
t
o
u
p
v
q
w
r
x
7
y
8
z
9
0
Para introducir la configuración de red en el
General
a/A * Borrar Espacio Completado reproductor, sigas estos pasos:
Soporte técnicoa Anterior m Mover " Entrar ' Regresar
1. Siga los pasos del 1 al 4 del procedimiento
‘Configuración de la conexión de red
inalámbrica - Auto’.
✎✎ NOTA 2. Una vez hecho, presione el botón VERDE (B)
`` Debe ser capaz de buscar una palabra de acceso en del mando a distancia o presione los botones
una de las pantallas de configuración utilizadas para ▲▼◄► para mover el cursor a Completado
configurar el enrutador o el módem. y presione el botón INTRO. Aparece la
5. Una vez hecho, presione el botón VERDE (B) pantalla de estado de red.
del mando a distancia o presione los botones
▲▼◄► para mover el cursor a Completado Config.
y presione el botón INTRO. Pantalla Ajustes IP
Español 41
WPS(PBC)
La forma más sencilla de configurar la conexión de
red inalámbrica es utilizando la función WPS(PBC) 2. Presione el botón INTRO.
o la función de conexión de un pie. 3. Coloque el enrutador inalámbrico de Samsung
Si el enrutador inalámbrico tiene la función en un área situada a 25 cm (10 pulgadas) del
WPS(PBC), siga los pasos siguientes: reproductor al que se va a conectar.
1. Presione los botones ▲▼ para seleccionar 4. Espere hasta que se establezca
WPS(PBC). automáticamente la conexión.
Config.
Pantalla
Configuración de red
Seleccione un tipo de conexión de red.
Estado de red
Audio
Red Compruebe si se ha establecido una conexión a
Cable
Sistema
Inalámb.
la red y a Internet.
Idioma
(General) Conéctese fácilmente al enrutador inalámbrico
Seguridad presionando el botón WPS(PBC). Seleccione esta
WPS(PBC) opción si su enrutador inalámbrico es compatible con
General Configuración de botón pulsador (PBC).
One Foot Config. Estado de red
Connection
Soporte técnico
> Mover " Entrar ' Regresar Pantalla
Dirección MAC XX:XX:XX:XX:XX:XX
Audio Dirección IP 0.0.0.0
Máscara de subred 0.0.0.0
Red KT_WLAN Puerta de enlace 0.0.0.0
Sistema Servidor DNS 0.0.0.0
42 Español
05
`` La función no está disponible si el cable HDMI no
Se define para permitir o prohibir una conexión de admite CEC.
Configuración
Internet cuando se utiliza el servicio BD-LIVE.
• Permitir (todo): se permite la conexión a `` Si el televisor Samsung tiene un logotipo Anynet+,
Internet para todos los contenidos de BD LIVE. admite la función Anynet+.
• Permitir (sólo válido): la conexión a Internet `` Dependiendo del TV, es posible que no funcionen
sólo está permitida para contenidos de BD-LIVE algunas resoluciones de salida de HDMI.
que contengan un certificado válido. Consulte el manual del usuario del TV.
• Restringir: no se permite ninguna conexión a
Gestión de datos BD
Internet para ningún contenido BD LIVE.
✎✎ NOTA
`` ¿Qué es un certificado válido? Permite gestionar el contenido descargado desde
Cuando el reproductor utiliza BD-LIVE para enviar un disco Blu-ray que admita el servicio BD-LIVE
los datos del disco y solicitar al servidor certificar el y que se haya almacenado en un dispositivo de
disco, el servidor utiliza los datos transmitidos para memoria Flash conectado.
comprobar si el disco es válido y envía el certificado Puede comprobar la información del dispositivo
de vuelta al reproductor. incluido el tipo de almacenamiento, borrar los
`` Es posible que se restrinja la conexión a Internet datos de BD o cambiar el dispositivo de memoria
mientras utilice contenidos de BD-LIVE. Flash.
Cambiar dispositivo permite seleccionar la
memoria interna del reproductor o la memoria
Sistema externa (dispositivo USB conectado).
Si los datos que se van a almacenar desde BD-
Configuración inicial LIVE son mayores que el tamaño de la memoria
restante o la memoria interna está llena, conecte
Al utilizar los ajustes iniciales, puede definir el el dispositivo USB externo y seleccione el
idioma, la configuración de red, etc. Dispositivo externo en el menú.
Para más información sobre la función de
configuración inicial, consulte la sección Información de la pantalla de Gestión de
Configuración inicial de este manual de usuario. datos de BD:
(Consulte de la página 30 a la 47.)
• Tamaño total: tamaño total de la memoria del
Anynet+ (HDMI-CEC)
dispositivo.
• Tamaño disponible: memoria disponible en el
Anynet+ es una función práctica que ofrece un dispositivo.
funcionamiento enlazado con otros reproductores
Samsung con la función Anynet+.
✎✎ NOTA
`` En el modo de memoria externa, la reproducción del
Para utilizar esta función, conecte este reproductor
disco puede detenerse si desconecta el dispositivo
a un TV Samsung con un cable HDMI.
USB en medio de la reproducción.
Puede utilizar este reproductor utilizando el
mando a distancia del TV Samsung e iniciar la `` Sólo se admiten aquellos dispositivos USB formateados
reproducción del disco simplemente presionando en el sistema de archivos FAT (etiqueta de volumen
el botón REPRODUCIR ( ) del mando a DOS 8.3). Recomendamos utilizar los dispositivos USB
distancia del TV. que admitan el protocolo USB 2.0 con una velocidad
Para más información, consulte el manual de de lectura/escritura de 4 MB/seg o superior.
usuario del TV. `` Es posible que no esté operativa la función de
• Apagado: las funciones Anynet+ no estarán reanudación de reproducción tras formatear el
operativas. dispositivo de almacenamiento.
• Encendido: la función Anynet+ estará operativa. `` La memoria total disponible para la gestión de datos
de BD puede diferir, dependiendo de las condiciones.
Español 43
Puede especificar la zona horaria aplicable a su Esta función está disponible junto con los discos
área. Blu-ray y DVD que han sido asignados a la
calificación o a la calificación numérica que indica
el nivel de madurez del contenido. Estos números
Config.
Zona horaria
ayudan a controlar los tipos discos Blu-ray y DVD
Pantalla
que su familia puede ver.
Audio
Red Seleccione una calificación de edad que desee
Sistema definir para la Clasific. paterna BD y el nivel de
Idioma calificación que desee definir para la Clasific.
Seguridad
GMT + 00:00
paterna DVD. El reproductor sólo reproducirá
General
Soporte técnico
Londres, Lisboa, Casablanca discos Blu-ray que no superen la calificación
< Camb. " Guardar ' Regresar indicada y discos DVD por debajo de la calificación
a menos que se introduzca la contraseña.
Los números más altos indican un contenido más
maduro.
Video de pago DivX®
Permite ver los códigos de registro VOD de DivX® Clasif. padres BD
VOD para comprar y reproducir contenido DivX®
Impide la reproducción de discos Blu-ray con
VOD.
calificaciones específicas a menos que se
introduzca la contraseña.
Rest.
Todos los ajustes volverán a los valores Clasif. padres DVD
predeterminados excepto para los ajustes de red
Impide la reproducción de discos DVD con
y Smart Hub.
calificaciones numéricas específicas a menos que
✎✎ NOTA se introduzca la contraseña.
`` La contraseña predeterminada es 0000.
Cambiar contraseña
Idioma Cambie la contraseña de 4 dígitos utilizada para
acceder a las funciones de seguridad.
Puede seleccionar el idioma que prefiera para el
menú de inicio, el menú del disco, etc.
Si olvida la contraseña
• Menú en pantalla: permite seleccionar el
idioma del menú en pantalla.
1. Retire el disco.
• Menu del disco: selecciona el idioma del menú
del disco. 2. Mantenga presionado el botón PARAR ( )
• Audio: selecciona el idioma del audio del disco. del panel superior por 5 segundos o más.
Todos los ajustes volverán a los ajustes
• Subtítulos: selecciona el idioma de los
subtítulos del disco. originales de fábrica.
✎✎ NOTA ✎✎ NOTA
`` Cuando se recuperan los ajustes predeterminados
`` El idioma seleccionado sólo aparecería si el disco lo
de fábrica, todos los datos de usuario almacenados
incluyese.
en la BD se borrarán.
44 Español
05
Panel frontal Actualización del software
Configuración
Cambie el brillo del panel superior. Este menú de actualización de software permite
• Auto: se atenúa durante la reproducción. actualizar el software del reproductor para
• Atenuar: atenúa la ventana de visualización. mejoras del rendimiento o servicios adicionales.
• Brillo: da brillo a la ventana de visualización.
Por Internet
Para actualizar por Internet, siga estos pasos:
Efecto de luz
1. Seleccione Por Internet y, a continuación,
Puede ajustar el efecto de luz en el reproductor. presione el botón INTRO. Aparece el mensaje
• Siempre act.: activa en todo momento el efecto Conectando al servidor.
de luz. Se recomienda para la visualización 2. Si hay una descarga disponible, aparece el
continua para uso comercial o demostraciones. diálogo de descarga con la barra de progreso
• Auto: activa el efecto de luz al encender o y se inicia la descarga.
apagar el reproductor y al insertar o expulsar un 3. Una vez completada la descarga, aparece la
disco. Se recomienda para uso doméstico. ventana de solicitud de actualización con tres
• Apagado: apaga la luz. opciones: Actualizar ahora, Actualizar más
tarde o No actualizar.
Red de control remoto 4. Si selecciona Actualizar ahora, el reproductor
actualiza el software, apaga y enciende
La función de control remoto de red le permite automáticamente.
controlar el reproductor de discos Blu-ray desde
5. Si no hace una selección antes de que
un dispositivo remoto como un teléfono inteligente
transcurra un minuto o selecciona Actualizar
a través de una conexión inalámbrica a su red de
más tarde, el reproductor almacena el nuevo
área local.
software de actualización. Puede actualizar el
Para utilizar la función de control remoto de red, software más tarde utilizando la función Por
siga estos pasos: descarga.
1. Seleccione Encendido en el menú de control 6. Si selecciona No actualizar, el reproductor
remoto de red. cancela la actualización.
2. Instale la aplicación de control remoto de red ✎✎ NOTA
de Samsung para controlar el reproductor en
`` El reproductor debe conectarse a Internet para
su dispositivo portátil compatible.
utilizar la función Por Internet.
3. Asegúrese de que el dispositivo portátil y
`` La actualización se completa cuando el reproductor
el reproductor estén conectados al mismo
se apaga y se enciende de nuevo por sí mismo.
enrutador inalámbrico.
`` Nunca apague o encienda manualmente el
4. Inicie la aplicación en el dispositivo portátil.
reproductor durante el proceso de actualización.
La aplicación debe buscar el reproductor y
mostrarlo en la lista.
5. Seleccione el reproductor.
6. Si es la primera vez que utiliza esta función,
le pedirá que acepte o rechace el control
remoto del reproductor. Seleccione Permitir.
7. Siga las instrucciones que se incluyen con la
aplicación para controlar el reproductor.
Español 45
46 Español
05
estos pasos:
1. Presione los botones ▲▼ para seleccionar
Configuración
Desc. en modo de espera y, a continuación,
presione el botón INTRO.
2. Seleccione Encendido o Apagado.
• Apagado: Si selecciona Apagado, el
reproductor le notificará con un mensaje
emergente cuando esté disponible el nuevo
software de actualización.
• Encendido: Si selecciona Encendido, el
reproductor descargará automáticamente
el nuevo software de actualización cuando
esté en modo de espera sin alimentación.
Si descarga el nuevo software de
actualización, el reproductor ´preguntará si
desea instalarlo al encender el reproductor.
✎✎ NOTA
`` Para utilizar la función Descarga en modo de espera,
el reproductor debe estar conectado a Internet.
Español 47
48 Español
06
El contenido de discos normalmente se divide
Z
Funciones básicas
como se indica a continuación.
• Disco Blu-ray, DVD-VIDEO 1. Durante la reproducción, presione
el botón TITLE MENU del mando a
título 1 título 2 distancia.
capítulo 1 capítulo 2 capítulo 1 capítulo 2 capítulo 3 2. Presione los botones ▲▼◄► para
realizar la selección que desee y presione el
botón INTRO.
✎✎ NOTA
• CD de Audio (CD-DA) `` Dependiendo del disco, es posible que las opciones
del menú difieran o incluso que el menú no esté
disponible.
pista 1 pista 2 pista 3 pista 4 pista 5
hZ h
1. Durante la reproducción, presione 1. Durante la reproducción, presione el
el botón DISC MENU del mando a botón POPUP MENU del mando a
distancia. distancia.
2. Presione los botones ▲▼◄► para 2. Presione los botones ▲▼◄ ► o el
realizar la selección que desee y presione el botón INTRO para seleccionar el menú que
botón INTRO. desee.
✎✎ NOTA ✎✎ NOTA
`` Dependiendo del disco, es posible que las opciones `` Dependiendo del disco, es posible que las opciones
del menú difieran o incluso que el menú no esté del menú difieran o incluso que el menú no esté
disponible. disponible.
Español 49
50 Español
06
Reproducción por fotogramas
Durante la reproducción, puede utilizar
Funciones básicas
el menú del disco presionando el botón
Reproducción a cámara lenta TOOLS.
Español 51
52 Español
06
como secundarios al mismo tiempo.
`` Aparece respectivamente el número total de ow
Funciones básicas
subtítulos principales y secundarios.
`` Si presiona el botón SUBTITLE del mando a Reproducción de un CD de audio
distancia, aparece la barra de subtítulos.
Presione el botón RETURN para eliminar la barra de (CD-DA)/MP3
subtítulos.
1. Inserte un CD de audio (CD-DA) o un disco
Modificación del ángulo de la MP3.
cámara • En un CD de audio (CD-DA), la primera
pista se reproduce automáticamente.
hZ • En un Disco MP3, presione los botones
▲▼ para seleccionar Música y presione el
Cuando un disco Blu-ray/DVD contiene múltiples botón INTRO en el dialogo del dispositivo
ángulos de una escena concreta, puede utilizar la conectado.
función ÁNGULO. Presione el botón INTRO.
1. Durante la reproducción, presione el botón
TOOLS. Elementos de pantalla del CD de audio
2. Presione los botones ▲▼ hasta seleccionar (CD-DA)/MP3
Ángulo.
1 2 3
3. Presione los botones ◄► para seleccionar el
Ángulo que desee.
Ajuste de BONUSVIEW
Música
1/13
h 00:43
TRACK 002
03:56
reproduce la película.
Esta función sólo está disponible si el disco tiene CD audio " Entrar < Página / Herramientas ' Regresar
la función Bonusview.
1. Durante la reproducción, presione el botón 5 4
TOOLS.
2. Presione los botones ▲▼ para seleccionar 1 Muestra la información de música.
Video BONUSVIEW o Audio BONUSVIEW.
2 Muestra la lista de reproducción.
3. Presione los botones ◄► para seleccionar el
Bonusview que desee. 3 Muestra la pista actual/pistas totales.
✎✎ NOTA 4 Muestra los botones disponibles.
`` Si cambia de Video BONUSVIEW, Audio BONUSVIEW Muestra el tiempo de reproducción actual/total.
5
cambiará automáticamente de acuerdo con Video
BONUSVIEW. 6 Muestra el estado actual de la reproducción.
`` El contenido 2D se convertirá en 3D y no se aplica la 7 Muestra el estado de la reproducción repetida.
función de BONUSVIEW.
(Dependiendo de los discos, es posible que aparezca 2. Presione los botones ▲▼ para seleccionar la
un contorno negro) pista que desee reproducir y, a continuación,
presione el botón INTRO.
Español 53
o Apagado. c Cerrar modo Editar ( ) Página / Herramientas " Seleccionar ' Regresar
Lista de reproducción
Música
1/3
1. Inserte un CD de audio (CD-DA) o un disco TRACK 001 TRACK 001
MP3. 00:43
54 Español
06
actual. (Se amplía hasta 4 veces)
G • Girar: se selecciona para girar la imagen.
Funciones básicas
(Esto hará girar la imagen a la derecha o a la
Reproducción de archivos JPEG izquierda.)
• Conf. de la imagen: se selecciona para ajustar
1. Inserte un disco JPEG. la calidad de la imagen.
• Información: muestra la información de la
2. Presione los botones ▲▼ para seleccionar
imagen, incluido el nombre y el tamaño, etc.
Fotos y, a continuación, presione el botón
INTRO. ✎✎ NOTA
3. Presione los botones ▲▼◄► para `` Para activar la función de música de fondo, el
seleccionar la carpeta que desee reproducir y, archivo de foto debe estar en el mismo medio de
a continuación, presione el botón INTRO. almacenamiento que el archivo de música. No
4. Presione los botones ▲▼◄► para obstante, la calidad del sonido puede verse afectada
seleccionar la foto que desee y, a por la velocidad de bits del archivo MP3, el tamaño
continuación, presione el botón INTRO. de la foto y el método de codificación.
Herramientas
Herramientas
Inic. vis. aut.
Pausar present diap
Música de fondo : Apagado
Veloc.vis.aut : Normal
Configuración de la música de fondo
Efecto secuencia : Persiana
Zoom
Música de fondo : Apagado
Girar
Configuración de la música de fondo
Conf. de la imagen
Zoom
Información
Girar
" Entrar ' Regresar Conf. de la imagen
Información
" Entrar ' Regresar
• Inic. vis. aut.: se selecciona para iniciar la 4. Presione los botones ▲▼ hasta seleccionar
presentación. Pausar present diap y, a continuación,
• Música de fondo: se selecciona para escuchar presione el botón INTRO.
música mientras ve una imagen. 5. También puede definir la velocidad y efecto de
• Configuración de la música de fondo: se la presentación utilizando el mismo método.
selecciona para definir el ajuste de música de
fondo.
Español 55
d WPS(PBC)
Mis cont.
Videos
Disp. Photos
conectado
Music
123
56 Español
07
Smart Hub o BD-LIVE conectando el reproductor En algunos casos, aparece la pantalla de país
a la red. inmediatamente después.
Servicios de red
4. Si ha aparecido la pantalla del país, presione
Lea las instrucciones siguientes antes de utilizar
los botones ▲▼ para seleccionar el país y, a
el servicio de red.
continuación, presione el botón INTRO.
1. Conecte el reproductor a la red.
(Consulte las páginas 26~27.)
✎✎ NOTA
`` Algunas aplicaciones sólo están disponibles en
2. Configure los ajustes de red.
algunos países.
(Consulte las páginas 39~43.)
5. Aparece la pantalla de los términos del
acuerdo de servicio.
Utilización de Smart Hub Si está de acuerdo, presione los botones ◄►
para seleccionar Acepto y, a continuación,
Utilizando Smart Hub, puede crear un flujo presione el botón INTRO.
de datos de películas, videos y música desde ✎✎ NOTA
Internet, acceder a diversas aplicaciones `` Las pantallas pueden tardar unos segundos en
gratuitas y verlas en el TV. El contenido de la aparecer.
aplicación incluye noticias, deportes, previsiones
meteorológicas, índices bursátiles, mapas, fotos y 6. Aparece la pantalla de actualización de
juegos. servicio para instalar una serie de servicios y
aplicaciones. Una vez hecho, se cierra. Las
También puede iniciar esta función aplicaciones y los servicios descargados
presionando el botón SMART HUB aparecen en la pantalla de Smart Hub. Esto
del mando a distancia. puede tardar algo.
✎✎ NOTA
`` Smart Hub puede cerrarse momentáneamente
Inicio de Smart Hub por primera durante el proceso de instalación.
vez `` Es posible que aparezca un número de pantallas tras
la instalación. Puede presionar el botón INTRO para
Para iniciar Smart Hub por primera vez, siga estos cerrarlas o dejarlas que se cierren por sí mismas.
pasos:
7. Para iniciar una aplicación, presione los
1. Vaya al menú de inicio. botones ▲▼◄► para resaltar un accesorio y
presione el botón INTRO.
Mis cont.
Videos
Fotos
Música
d WPS(PBC)
Español 57
Contents 1 Contents 2 Contents 3 Contents 4 • AMARILLO (C) : para editar las aplicaciones.
Recomendado • AZUL (D) : para cambiar los ajustes de Smart
Contents 1
xxxxxxxx
Contents 2
xxxxxxxx
Contents 3
xxxxxxxx
Contents 4
xxxxxxxx
Contents 5
xxxxxxxx
Hub.
Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 Contents 6 Mis aplicaciones: muestra la galería personal de
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
7 aplicaciones que se pueden añadir, modificar y
Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12
borrar.
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
✎✎ NOTA
7 6 `` Samsung Electronics no se hace responsable legal
de ninguna interrupción del servicio de Smart Hub
Comercial: muestra la guía de Smart Hub, una causado por el proveedor de servicio sea cual sea la
1 introducción sobre el reproductor e información razón.
sobre la nueva aplicación. `` El servicio Smart Hub descarga y procesa datos a
través de Internet de forma que pueda disfrutar de
Your Video: facilita recomendaciones para videos contenido de Internet en su pantalla de TV.
basándose en sus gustos. Si la conexión de Internet es inestable, es posible
• Le permite ver recomendaciones de películas que se demore o se interrumpa el servicio.
basándose en sus preferencias anteriores. Además, es posible que se apague automáticamente
• Le permite seleccionar una película, muestra una el reproductor en respuesta a las condiciones de
2 lista de proveedores de VOD (Video on Demand) Internet.
que tenga la película y le permite seleccionar un Si esto ocurre, compruebe la conexión a Internet e
proveedor para el flujo de datos. (El flujo de datos inténtelo de nuevo.
no está disponible en algunas áreas.) `` Es posible que los servicios de las aplicaciones sólo
• Para obtener instrucciones sobre el uso de Your se faciliten en inglés y el contenido disponible podría
Video (Su video), visite www.samsung.com. variar, dependiendo de su área.
Search: Proporciona una búsqueda integrada de `` Para más información sobre un servicio de Smart
los proveedores de video y los dispositivos AllShare Hub, visite el sitio web del proveedor de servicio
conectados. aplicable.
• Se puede utilizar al mismo tiempo que Smart Hub `` El proveedor de servicios puede cambiar los
3 (excepto cuando se esté viendo un disco Blu-ray). servicios facilitados de Smart Hub sin aviso previo.
• Para un acceso sencillo, utilice el botón SEARCH `` El contenido del servicio de Smart Hub puede
del mando a distancia. diferir dependiendo de la versión de firmware del
• Para obtener instrucciones sobre el uso de la reproductor.
función de búsqueda), visite www.samsung.com.
58 Español
07
de flecha. Para borrar texto, mueva el cursor a
A través del mando a distancia, puede utilizar el la derecha del carácter que desee borrar y, a
Servicios de red
teclado en pantalla para introducir letras, números continuación, presione el botón AUDIO. Para
y símbolos. cambiar entre mayúscula/minúscula o introducir
números o símbolos de puntuación, presione el
botón SUBTITLE.
1 2 3
Creación de una cuenta
.,– abc def
4 5 6
1 ghi jkl mno
4 5 Inicio de sesión
Contents 1 Contents 2 Contents 3 Contents 4
Recommended
Smart TV ID Presione [Enter] %
Contents 1 Contents 2 Contents 3 Contents 4 Contents 5
Español 59
60 Español
07
Si tiene una cuenta con uno de los proveedores La función de cambio de contraseña le permite
de la lista, mediante la función del registro de cambiar la contraseña de Smart Hub. Para
Servicios de red
la cuenta de servicio, puede asociar la cuenta cambiar la contraseña, siga estos pasos:
del proveedor y la contraseña de la cuenta del
1. Seleccione Cambiar contraseña y, a
proveedor con su cuenta de Smart TV. Si asocia
continuación, presione el botón INTRO.
una cuenta, podrá iniciar fácilmente sesión en la
cuenta a través de Smart Hub, sin introducir el 2. Introduzca la contraseña actual. Aparece la
nombre de la cuenta o la contraseña. pantalla siguiente.
Para utilizar la función de registro de cuenta de 3. En la siguiente pantalla, introduzca una
servicio, siga estos pasos: contraseña en la primera línea. Introdúzcala
de nuevo en la segunda línea para confirmar.
1. En el menú Administración de cuentas,
seleccione Registrar cuenta de servicio y, 4. Aparece la pantallas con el mensaje de que
a continuación, presione el botón INTRO. se ha completado el cambio de contraseña.
Aparece la ventana de registro de la cuenta Presione el botón INTRO o espere unos 5
de servicio. segundos a que se cierre la pantalla.
2. Presione los botones de flecha ▲▼ para Bórrelo de lista de cta. de TV
seleccionar el proveedor de servicios que
desee asociar con la cuenta de Smart TV y, a La función Eliminar cuentas de servicio cancela
continuación, presione el botón INTRO. todas las cuentas de servicio actualmente
✎✎ NOTA
registradas en la pantalla de registro de cuentas
de servicio.
`` Si tiene una cuenta Samsung y desea utilizar la
función Samsung Apps, debe registrar aquí la cuenta Desactive la cuenta
de Samsung Apps. Consulte las páginas 64~66
La función de desactivación de cuenta desactiva
para obtener información adicional.
su cuenta de Smart TV y la borra de Smart Hub
3. Presione los botones ▲▼ para seleccionar junto con todos los ajustes de la cuenta.
Registrar y, a continuación, utilizando el
mando a distancia y el teclado en pantalla, Reiniciar
ingrese el ID y la contraseña definidos.
Una vez hecho, presione el botón INTRO. La función de reinicio inicializa todos los
✎✎ NOTA
accesorios descargados, borra todas las cuentas
y ajustes de usuario del reproductor y reinicia
`` Son el ID y la contraseña que normalmente se todos los ajustes de Smart Hub a sus valores por
utilizan para acceder a su cuenta en este sitio. defecto de fábrica. Después Smart Hub se reinicia
4. Su ha introducido correctamente el ID y la como si fuera la primera vez que se utiliza. Su
contraseña, aparece el mensaje de que se ha cuenta, no obstante, permanece en el servidor
registrado correctamente. de Smart Hub. Para iniciar sesión en la cuenta,
introduzca el ID y la contraseña en la pantalla de
5. Si ha presionado OK, repita los pasos del 2 al creación de cuenta.
4 para asociar otro proveedor de servicios.
Para utilizar la función de reinicio, siga estos pasos:
6. Una vez hecho, presione el botón RETURN.
1. En el menú Configuración, seleccione Rein. y,
a continuación, presione el botón INTRO.
Aparece la pantalla de reinicio.
2. Introduzca la contraseña de seguridad. Esta
es la contraseña introducida si configuró una
calificación paterna de BD o DVD (consulte la
página 44). Si no se ha hecho, introduzca 0000.
Español 61
62 Español
07
carpeta
La función Cambiar nombre de carpeta permite
1. Cierre el menú del modo de edición.
Servicios de red
cambiar el nombre a las carpetas. Para utilizar la
2. En Mis aplicaciones, presione ▲▼◄► para función Cambiar nombre de carpeta, siga estos
seleccionar una carpeta y, a continuación, pasos:
presione el botón INTRO. Se abre la carpeta. 1. Presione el botón AMARILLO (C) del mando
3. Seleccione un accesorio y, a continuación, a distancia.
presione el botón INTRO. Se inicia la 2. Seleccione y ▲▼◄► para seleccionar una
aplicación o el servicio de la aplicación. carpeta y, a continuación, presione el botón
INTRO.
Para editar elementos en una carpeta
3. Presione ▲▼◄► para seleccionar Cambiar
Seleccione una carpeta y, a continuación, nombre de carpeta y, a continuación,
presione el botón INTRO. Se abre la carpeta. presione el botón INTRO. Aparece la ventana
Presione el botón AMARILLO (C) del mando a de cambio de nombre de carpeta junto con
distancia. Aparecen los botones de edición en la un teclado.
parte inferior de la pantalla.
4. Utilice el teclado para introducir un nombre
Estos botones funcionan de igual forma que nuevo y, a continuación, presione el botón
los botones del menú de edición de la pantalla INTRO. La ventana de cambio de nombre se
principal. Por ejemplo, para devolver un accesorio cierra y el nuevo nombre aparece debajo de
a la pantalla principal de Mis aplicaciones: la carpeta.
1. Seleccione un accesorio.
2. Seleccione Mover a carpeta y presione el Bloquear
botón INTRO. Aparece la ventana Mover a La función de bloqueo le permite bloquear
carpeta. algunos accesorios en Mis aplicaciones de forma
3. Seleccione Mis aplicaciones y, a continuación, que no pueda abrirse sin introducir el código de
presione el botón INTRO. Se cierra la ventana seguridad paterno.
Mover a carpeta y el accesorio vuelve a la Para utilizar la función de bloqueo, siga estos
pantalla principal de Mis aplicaciones. pasos:
1. Presione el botón AMARILLO (C) del mando
Nueva carpeta
a distancia.
La función de nueva carpeta le permite crear 2. Presione ▲▼◄► para seleccionar un
y asignar nombre a nuevas carpetas. Una accesorio y, a continuación, INTRO. Si se
vez creada la carpeta, puede trasladar a ella puede bloquear el accesorio, se activa la
accesorios. Para utilizar la función de nueva opción de menú Bloquear.
carpeta, siga estos pasos:
3. Seleccione ▲▼◄► para seleccionar
1. Presione el botón AMARILLO (C) del mando Bloquear y, a continuación, presione el botón
a distancia. INTRO. Aparece la ventana de bloqueo de
2. Presione ▲▼◄► para mover el cursor a servicio.
Nueva carpeta y, a continuación, presione el 4. Introduzca el código de seguridad paterno
botón INTRO. Aparece la ventana de nueva (consulte la página 44). Si no ha creado
carpeta junto con un teclado. ningún código de seguridad paterno,
3. Utilice el teclado para introducir el nombre de introduzca 0000.
la carpeta y presione el botón INTRO. 5. Presione el botón INTRO. Aparece la ventana
Se cierra la pantalla de nueva carpeta y de bloqueo de servicio confirmando el
aparece Nueva carpeta en la pantalla de bloqueo y se cierra. Aparece un símbolo de
Smart Hub. bloqueo al lado del accesorio.
Español 63
1. Presione el botón AMARILLO (C) del mando Samsung Apps le permite descargar aplicaciones
a distancia. y servicios de pago o gratuitas en su reproductor
2. Presione ▲▼◄► hasta seleccionar un de discos Blu-ray y verlos o usarlos en su TV.
accesorio bloqueado y, a continuación, Estas aplicaciones y servicios incluyen videos,
presione el botón INTRO. música, fotos, juegos, noticias, deportes, etc.
3. Seleccione y ▲▼◄► para seleccionar Los accesorios de las nuevas aplicaciones
Desbloquear y, a continuación, presione el aparecen en Mis aplicaciones.
botón INTRO. Aparece la ventana de bloqueo Las aplicaciones y servicios adicionales se añaden
de servicio. de forma regular.
4. Introduzca el código de seguridad paterno
Para aplicaciones de pago
(consulte la página 44). Si no ha creado
ningún código de seguridad paterno,
introduzca 0000.
Para descargar aplicaciones de pago, tiene que
5. Presione el botón INTRO. Aparece la ventana crear una cuenta de Samsung Apps y añadir una
de bloqueo de servicio liberado confirmando tarjeta de crédito a la cuenta.
que el bloqueo se ha liberado y se cierra.
Para crear una cuenta de Samsung Apps, visite
Borrar www.samsung.com.
64 Español
07
Para utilizar la pantalla Samsung Apps, siga estos Están disponibles las siguientes categorías:
Servicios de red
pasos: • Lo nuevo: muestra las aplicaciones recién
1. Presione los botones ◄► para ir a la lista de registradas.
categorías de la izquierda. • Video: muestra diversos soportes de video
como películas, programas de TV y videos de
2. Presione ▲▼ para resaltar una categoría.
corta duración.
En unos segundos, la pantalla Samsung Apps
muestra las aplicaciones de dicha categoría. • Juego: muestra varios juegos como sudoku y
Las fichas Ordenar aparecen en la parte ajedrez.
superior. • Deportes: muestra diversos servicios
multimedia sobre deportes como información de
3. Presione el botón ► para ir a a las
partidos, imágenes y videos de larga duración.
aplicaciones o servicios que aparecen.
• Estilo de vida: incluye varios servicios
4. Presione los botones ▲▼◄► hasta multimedia sobre estilo de vida como música,
seleccionar una aplicación o servicio y, a herramientas de tratamiento de fotos personales
continuación, presione el botón INTRO. y redes sociales como Facebook y Twitter.
Aparece la pantalla Inf. de la aplicación que
• Información: incluye diversos servicios
describe el servicio o la aplicación.
de información como noticias, bolsa y
5. Seleccione Descargar ahora y, a continuación, meteorología.
presione el botón INTRO. Si la aplicación • Otro: incluye otros servicios diversos.
o el servicio es gratuito, se descarga y se
ejecuta. Si no lo es, y tiene una tarifa, siga las
instrucciones de la pantalla para completar la
Mi cuenta
descarga. Mi cuenta le facilita acceso al historial de pedidos
✎✎ NOTA y descargas de Samsung Apps y a la pantalla My
Apps Cash. Debe tener una cuenta de Samsung
`` La descarga de algunas aplicaciones es gratuita,
Apps para acceder a esta información.
pero requiere registrarse con el proveedor o utilizar
una cuenta de pago con el proveedor.
Ayuda
`` Los accesorios de aplicaciones y servicios
descarados desde Samsung Apps aparecen en Mis Si tiene preguntas sobre Samsung Apps,
aplicaciones. compruebe antes la ayuda. Si no le sirve ninguna
de las sugerencias, visite el sitio Web www.
Fichas Orden ar por samsung.com.
Puede acceder a las fichas Ordenar por de la Para utilizar la función de ayuda, siga estos pasos:
parte superior de la pantalla utilizando los botones 1. Presione los botones ▲▼ hasta seleccionar
▲▼◄►. Cada ficha muestra los servicios o Ayuda y, a continuación, presione el botón
aplicaciones en la categoría que elija, ordenados INTRO.
por los criterios de la ficha (Recomendados, Más
2. Presione ▲▼ para desplazarse por el texto
descargados, Más recientes, Nombre).
de la ayuda.
También puede utilizar el botón AZUL (D) del
mando a distancia para acceder a las fichas de 3. Presione ◄ para salir de la ayuda.
Ordenar por. Cada vez que presiona el botón
AZUL (D), se cambia la visualización de una ficha
de ordenación a la siguiente.
Español 65
BD-LIVE™
66 Español
08
Antes de solicitar servicio técnico, compruebe lo siguiente:
Apéndice
PROBLEMA SOLUCIÓN
El mando a distancia no funciona. • Compruebe las pilas del mando a distancia. Quizás haya que cambiarlas.
• Utilice el mando a distancia a una distancia de no más de 6.1 m.
• Extraiga las pilas y mantenga presionado uno o más botones durante
varios minutos para descargar el microprocesador del mando a distancia
y reinicializarlo. Introduzca las pilas de nuevo y compruebe si funciona el
mando a distancia.
El disco no funciona. • Asegúrese de que el disco esté cargado con el lado de la etiqueta hacia
arriba.
• Compruebe el código regional del disco Blu-ray/DVD.
Aparece en pantalla un mensaje de • Este mensaje aparece cuando se presiona un botón no válido.
prohibición. • El software del disco Blu-ray/DVD no admite esta función (ej. ángulos).
• Ha solicitado un título, un número de capítulo o un punto de búsqueda que
está fuera de rango.
La pantalla está bloqueada. • Si la salida HDMI se define en una resolución que no sea compatible con el
TV (por ejemplo, 1080p), es posible que pueda ver ninguna imagen en el
TV.
• Presione el botón PARAR ( ) (en el panel superior) por más de 5
segundos sin ningún disco cargado. Todos los ajustes volverán a los ajustes
originales de fábrica.
• Cuando se recuperan los ajustes predeterminados de fábrica, todos los
datos de usuario almacenados en la BD se borran.
Español 67
Olvido de la contraseña • Presione el botón PARAR ( ) (en el panel superior) por más de 5
segundos sin ningún disco cargado. Todos los ajustes que contenían una
contraseña volverán a los ajustes originales de fábrica.
No utilice esta opción a menos que sea absolutamente necesario.
• Cuando se recuperan los ajustes predeterminados de fábrica, todos los
datos de usuario almacenados en la BD se borran.
Si experimenta otros problemas. • Vaya al contenido y busque la sección del manual del usuario con las
explicaciones sobre el problema actual y siga de nuevo el procedimiento.
• Si el problema persiste, póngase en contacto con el centro de servicio
técnico autorizado de Samsung más cercano.
La imagen produce ruidos o está • Compruebe si el disco tiene suciedad o está rayado.
distorsionada. • Limpie el disco.
No hay salida de HDMI. • Compruebe la conexión entre el TV y el terminal de HDMI del reproductor.
• Compruebe si el TV admite la resolución de entrada de HDMI 480p, 720p,
1080i, 1080p.
Pantalla de salida de HDMI anormal. • Si aparecen interferencias en pantalla, significa que el TV no admite HDCP
(protección de contenido digital de ancho de banda alto).
Función AllShare
Puedo ver carpetas compartidas a través de • AllShare sólo muestra los archivos que corresponden a las categorías de
AllShare, pero no puedo ver los archivos. imagen, música o película. Es posible que no aparezcan estos archivos que
no corresponden a estas categorías.
La conexión AllShare entre el reproductor y • La dirección IP en la misma subred debe ser única. Si no lo son, la
la PC es inestable. interferencia de IP puede causar este fenómeno.
• Compruebe si tiene activado un cortafuegos.
Si así es, desactivar la función de cortafuegos.
68 Español
08
BD-LIVE
Apéndice
No puedo conectar al servidor de BD-LIVE. • Compruebe si la conexión de red es satisfactoria o no utilizando el menú
Estado de la red. (Consulte la página 42.)
• Compruebe si el dispositivo de memoria USB está conectado al reproductor.
• El dispositivo de memoria debe tener al menos 1 GB de espacio libre en
disco para alojar el servicio de BD-LIVE.
Puede comprobar el tamaño disponible en Gestión de datos de BD. (Consulte
la página 43.)
• Compruebe si el menú Conexión a Internet BD-LIVE está definido en
Permitir (todas).
• Si fallo todo lo anterior, póngase en contacto con el proveedor de contenido
o actualice el firmware más reciente en el reproductor.
Al utilizar el servicio de BD-LIVE, se produce • El dispositivo de memoria debe tener al menos 1 GB de espacio libre en
un error. disco para alojar el servicio de BD-LIVE.
Puede comprobar el tamaño disponible en Gestión de datos de BD. (Consulte
la página 43.)
✎✎ NOTA
`` Cuando se recuperan los ajustes predeterminados de fábrica, todos los datos de usuario almacenados en la BD se
borran.
Reparaciones
Si se pone en contacto con nosotros para reparar el reproductor, podría aplicársele una tarifa de
administración si:
1. Si solicita que un ingeniero acuda a su casa y el producto no tiene ningún defecto.
2. Trae la unidad al centro de reparaciones y el producto no tiene ningún defecto.
Antes de acudir a su casa o de realizar cualquier trabajo en el reproductor, le informaremos del importe
de la tarifa de administración.
Le recomendamos que lea este manual a fondo, que busque una solución en línea en www.samsung.
com o que se ponga en contacto con el Centro de atención al cliente de Samsung antes de intentar
buscar ayuda para reparar el reproductor.
Español 69
70 Español
08
NO TODOS los discos son compatibles
Apéndice
• Sujeto a las restricciones que se describen a continuación y a las indicadas a lo largo de todo el
manual, incluida la sección Tipo de disco y características de este manual de usuario, los tipos de
discos que pueden reproducirse son: discos BD-ROM comerciales pregrabados, DVD-VIDEO y CD de
audio (CD-DA); discos BD-RE/-R, DVD-RW/-R ; y discos CD-RW/-R.
• Otros discos diferentes a los anteriores no podrán reproducirse en este reproductor. Y es posible que
algunos de los discos anteriormente mencionados no puedan reproducirse debido a una o más de las
razones indicadas a continuación.
• Samsung no puede garantizar que este reproductor reproduzca todos los discos que lleven los
logotipos de BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R y CD-RW/-R, y es
posible que este reproductor no responda a todas las órdenes de funcionamiento ni pueda utilizar las
funciones de todos los discos. Estos y otros problemas de compatibilidad de disco y funcionamiento
del reproductor con discos con nuevos formatos y con formatos existentes son posibles por las
siguientes razones:
-- Blu-ray es un formato nuevo en continua evolución y es posible que este reproductor no pueda
comprender todas las funciones de los discos Blu-ray ya que algunas funciones pueden ser
opcionales, es posible que se hayan añadido nuevas funciones al formato Blu-ray tras la producción
de este reproductor y algunas funciones disponibles están sujetas a una disponibilidad ulterior.
-- No todas las versiones del nuevo formato y del formato existente del disco están admitidas en este
reproductor;
-- Formatos de disco nuevos y existentes pueden ser revisados, modificados, actualizados, mejorados
y complementados;
-- Algunos discos son producidos de manera que permiten utilizar de forma específica o limitada
algunas operaciones y funciones durante la reproducción;
-- Algunas funciones pueden ser opcionales y es posible que se hayan añadido funciones adicionales
tras la producción de este reproductor o ciertas funciones disponibles pueden estar sujetas a
disponibilidad ulterior;
-- Algunos discos que llevan los logotipos de BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R,
DVD+RW/+ R y CD-RW/-R puede ser discos aún no estandarizados;
-- Es posible que algunos discos no puedan reproducirse dependiendo de su estado físico o las
condiciones de grabación;
-- Pueden producirse problemas y errores durante la creación de software para disco Blu-ray, DVD o
la fabricación de discos;
-- Este reproductor funciona de forma diferente que el reproductor de DVD estándar u otro equipo de
AV; o
-- Por las razones reseñadas a lo largo del manual del usuario y por otras razones descubiertas y
divulgadas por el servicio de atención al cliente de SAMSUNG.
• Si encuentra problemas de compatibilidad en el disco o problemas de funcionamiento del reproductor,
póngase en contacto con el servicio de atención al cliente de SAMSUNG.
También puede ponerse en contacto con el servicio de atención al cliente de SAMSUNG para obtener
posibles actualizaciones sobre este reproductor.
• Para obtener información adicional sobre las restricciones de reproducción y la compatibilidad de los
discos, consulte las secciones Precauciones, Antes de leer este Manual del usuario, Tipos de discos y
características y Antes de reproducir de este manual de usuario.
Español 71
08
• Fabricado con licencia de Dolby Laboratories. Dolby y el símbolo de la doble D marcas
Apéndice
comerciales de Dolby Laboratories.
• Oracle y Java son marcas registradas de Oracle y sus filiales. Otros nombres pueden
ser marcas comerciales de sus respectivos propietarios
Español 73
Area Contact Center Web Site Area Contact Center Web Site
` North America Serbia
0700 Samsung (0700 726
www.samsung.com
Canada 1-800-SAMSUNG (726-7864) www.samsung.com 7864)
Mexico 01-800-SAMSUNG (726-7864) www.samsung.com Slovakia 0800-SAMSUNG (726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Spain 902-1-SAMSUNG (902 172 678) www.samsung.com
` Latin America Sweden 0771 726 7864 (SAMSUNG) www.samsung.com
Argentine 0800-333-3733 www.samsung.com www.samsung.com/ch
0848-SAMSUNG (7267864,
Switzerland www.samsung.com/
Brazil 0800-124-421 / 4004-0000 www.samsung.com CHF 0.08/min)
ch_fr/(French)
Chile 800-SAMSUNG (726-7864) www.samsung.com U.k 0330 SAMSUNG (7267864) www.samsung.com
Colombia 01-8000112112 www.samsung.com Eire 0818 717100 www.samsung.com
Costa Rica 0-800-507-7267 www.samsung.com Lithuania 8-800-77777 www.samsung.com
Dominica 1-800-751-2676 www.samsung.com Latvia 8000-7267 www.samsung.com
Ecuador 1-800-10-7267 www.samsung.com Estonia 800-7267 www.samsung.com
El Salvador 800-6225 www.samsung.com ` CIS
Guatemala 1-800-299-0013 www.samsung.com Russia 8-800-555-55-55 www.samsung.com
Honduras 800-7919267 www.samsung.com Georgia 8-800-555-555 -
Jamaica 1-800-234-7267 www.samsung.com Armenia 0-800-05-555 -
Nicaragua 00-1800-5077267 www.samsung.com Azerbaijan 088-55-55-555 -
Panama 800-7267 www.samsung.com 8-10-800-500-55-500
Peru 0-800-777-08 www.samsung.com Kazakhstan www.samsung.com
(GSM: 7799)
Puerto Rico 1-800-682-3180 www.samsung.com Uzbekistan 8-10-800-500-55-500 www.samsung.com
Trinidad & Kyrgyzstan 00-800-500-55-500 www.samsung.com
1-800-SAMSUNG (726-7864) www.samsung.com
Tobago Tadjikistan 8-10-800-500-55-500 www.samsung.com
Venezuela 0-800-100-5303 www.samsung.com www.samsung.ua
` Europe Ukraine 0-800-502-000 www.samsung.com/
Albania 42 27 5755 - ua_ru
0810 - SAMSUNG (7267864, Belarus 810-800-500-55-500 -
Austria www.samsung.com
€ 0.07/min) Moldova 00-800-500-55-500 -
www.samsung.com/ ` Asia Pacific
be (Dutch) Australia 1300 362 603 www.samsung.com
Belgium 02-201-24-18
www.samsung.com/
be_fr (French) New Zealand 0800 SAMSUNG (0800 726 786) www.samsung.com
Bosnia 05 133 1999 - China 400-810-5858 / 010-6475 1880 www.samsung.com
Bulgaria 07001 33 11 www.samsung.com www.samsung.com/hk
Hong Kong (852) 3698 4698 www.samsung.com/
Croatia 062 SAMSUNG (062 726 7864) www.samsung.com hk_en/
800-SAMSUNG (800-726786) 3030 8282 / 1800 110011 /
Samsung Zrt., česká organizační India www.samsung.com
Czech www.samsung.com 1800 3000 8282 / 1800 266 8282
složka, Oasis Florenc, Soko- 0800-112-8888 /
lovská394/17, 180 00, Praha 8 Indonesia www.samsung.com
021-5699-7777
Denmark 70 70 19 70 www.samsung.com Japan 0120-327-527 www.samsung.com
Finland 030 - 6227 515 www.samsung.com Malaysia 1800-88-9999 www.samsung.com
France 01 48 63 00 00 www.samsung.com 1-800-10-SAMSUNG(726-7864) /
01805 - SAMSUNG (726-7864 1-800-3-SAMSUNG(726-7864) /
Germany www.samsung.com Philippines www.samsung.com
€ 0,14/Min) 1-800-8-SAMSUNG(726-7864) /
Hungary 06-80-SAMSUNG (726-7864) www.samsung.com 02-5805777
Italia 800-SAMSUNG (726-7864) www.samsung.com Singapore 1800-SAMSUNG (726-7864) www.samsung.com
Kosovo +381 0113216899 - Thailand 1800-29-3232 / 02-689-3232 www.samsung.com
Luxemburg 261 03 710 www.samsung.com Taiwan 0800-329-999 www.samsung.com
Macedonia 023 207 777 - Vietnam 1 800 588 889 www.samsung.com
Montenegro 020 405 888 - ` Middle East
0900-SAMSUNG Bahrain 8000-4726 www.samsung.com
Netherlands www.samsung.com
(0900-7267864) (€ 0,10/Min) Egypt 08000-726786 www.samsung.com
Norway 815-56 480 www.samsung.com Jordan 800-22273 www.samsung.com
0 801 1SAMSUNG (172678) Morocco 080 100 2255 www.samsung.com
Poland www.samsung.com
/ 022-607-93-33 Oman 800-SAMSUNG (726-7864) www.samsung.com
Portugal 80820-SAMSUNG (726-7864) www.samsung.com Saudi Arabia 9200-21230 www.samsung.com
1. 08010 SAMSUNG (72678) - Turkey 444 77 11 www.samsung.com
doar din reţeaua Romtelecom,
Rumania tarif local www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com
2. 021.206.01.10 - din orice ` Africa
reţea, tarif normal Nigeria 0800-SAMSUNG (726-7864) www.samsung.com
South Africa 0860-SAMSUNG (726-7864 ) www.samsung.com
ΔϴΑήόϟΔϐϠϟ
AK68-02031C-00
AK68-02031C