Directions: Fill in the blank with the correct words that will complete the sentence.
____________1. This tool is used to manipulate small parts.
____________2. Used to retrieve parts from locations that are too small for your hand to fit. ____________3. It is used to remove the insulation from wire so that it can be twisted to other wires or crimped to connectors to make a cable. ____________4. It is Used to attach connectors to wires ____________5. Used to terminate wire into termination blocks. Some cable connectors must be connected to cables using a punch down tool. ____________6. Used to clean different computer components without scratching or leaving debris ____________7. Used to hold screws, jumpers, fasteners, and other small parts and prevents them from getting mixed together ____________8. Used to bundle cables neatly inside and outside of a computer ____________9. A device that can take many types of measurements. It tests the integrity of circuits and the quality of electricity in computer components. ____________10. Used to blow away dust and debris from different computer parts without touching the components ____________11. Protects computer equipment when grounded to a computer chassis. ____________12. Used to tighten or loosen slotted screws. ____________13. A handheld device that aids in accomplishing a task. ____________14. It should contain all the tools necessary to complete hardware repairs. ____________15. An electronic device that can store/restore, encode/decode and manipulate data in many ways.
B. Directions: Using the table below, give at least 2 examples of tools that are aligned with the following: