Professional Documents
Culture Documents
1.Installation preparation
Including:Relay,buzzer,buzzer harness,connector.
Buzzer harness
Relay
Buzzer
A - 90
B -24 D -18
Or 25
C - 21
2.2 Connect to the main harness
The main harness port to be connected is under the seat, so the
seat should be removed before connecting the harness, and the seat
should be restored to its original state after the harness is
connected.
Main
harness
buzzer harness
connection port.
18,21,24,25
Connect the reverse buzzer harness port F with the corresponding
port on the main harness. The harness position of different models
may be different. Therefore, when connecting, pay attention to
whether the harness number next to the port corresponds, and do not
connect incorrectly.
Connect them
Note the numbers
E
F Main harness
connection port
18,21,24,25
Connect to Connect to
port E positive(red)
282104-1 DJ7021-1.5-21
Buzzer harness port
conne
ctor
Buzzer port
Fix the mounting plate on the reversing buzzer to the plugger as shown
in the figure.
plugger buzzer