2 pynowano
lt)
teeta
oe reomec!
pear
eer
Pearce tas
eer
eee Beijing Holland Co., Ltd.
(We: hota com1. Technical Parameters
1 Capacity
2 ——-Rawmateil
3 Furnace type
4 Meting ate
5 Gas consumption
6 Working temp,
7 Combustion system
30-1001
‘Aluminum ingots, aluminum seraps
that do nat cantain ron
Stationary
231A. hourtsingle chamber)
>55mi/aluminum
11000, Maxa050
2 sets (4 cs) regenerative burners
‘work alternately
2. Character
2, Single-chamber combustion and
single-chamber feeding can be
used to realize continuous feeding,
which improves productivity.
b, The molten aluminum in the
lower part of the furnace circulates
with each other, which can realize
partial immersion melting and
reduce aluminum loss.
The flue gas in the upper part of
the furnace circulates each other,
which can realize the preheating of
the aluminum material and reduce
the energy consumption and
‘aluminum loss
4, Equipped with dual regenerative
combustion system, the melting
speed can reach 10-12¢/h,
2 pinouand
Dlagonsl Door Type
<=
Vertical Door Type2 pinouand
2, Characteristics
2a. The side well furnace is divided into a heating chamber, 3
charging chamber and a aluminum debris wel
The charging chamber is mainly used to add large aluminum
‘materials. The aluminum debris well is manly used to add small
aluminum materials
«Small pieces of ight and thin materials and aluminum chips are
continuously and directly added to the aluminum debris well
hich can produce vortex and help the materials to sink quickly
inside the high-temperature molten aluminum and does not
contact with the flame, thereby reducing burning loss
<4. Equipped with aliquid aluminum circulating pump to make the
temperature and composition of the alumiaum liquid uniform
1. Technical Parameters through sting,
fe. The furnace must be guaranteed to have mother quid for
continuous production, and a holding furnace must be equipped
to undertake the transfer of molten aluminum af this furnace
1 pacity 30-1001
‘Aluminum scrap after pretreatment
2 Rawmateral (crushing, magnetic separation, preheating)
3 Furnace type Stationary
4 Melting rate StAL / hour
5 Gas consumption = 50m/aluminum
6 Working temp, 1100, Max.1200°0
7. Combustion system 3 Regenerative bumers work alternately,2 pmnowano
11) Technical parameters
1 capacity 3-100¢
2 Furnace ype stationary
3 Door ype Vertical door 2) Characters
4 Fumace shape Rectangle 2. The furnace door has a large design range (25m to
5m, which can meet the requirements of different
5 Melting rate 2-8tA\./hour users.
fa an ne ». Low energy consumption, gs consumption can be
low to 52 m/Aowaluminum (calculated according to
7 Temp. accuracy asc natural 929)
a aT as If using regenerative combustion system, exhaust
2 g ug ae ae temperature is low to about 250°C, so as to reduce the
eee ar he aan ay fom he fama and reduce erry
oO ae) pc d. Temperature control methods: thermocouple
Regenerative High taniperature and ‘non-continuous temperature measurement, automatic
21 Combustion system ence aes adjustment of firepower.11) Technical parameters
10
a
Copacity
Furnace type
Door type
Furnace shape
Melting rate
Air pressure
Temp. accuracy
Gas consumption
Max. working temp,
Max. temp. control
‘Combustion system
3-100
stationary
Diagonal door
Rectangle
2-8t Al. /hour
65-100KPa
asc
>55m'/vAl (Natural gas)
1050°C
au00'e
Regenerative/High temperature and
high speed burner
2 pynowano
2) Characteri
{a, The fixed diagonal furnace door has a simple structure,
and the design range of the furnace door is 1.5m to 3.5m,
which can meet the different needs of customers.
b. The gas consumption can be low to $5 m’/ton-aluminum
(calculated according to natural gas).
. If using regenerative combustion system, exhaust
temperature is low to about 250°, so as to reduce the heat
taken away from the furnace and reduce eneray
consumption.
d, Temperature control__methods: thermocouple
nnon-continuous temperature measurement, automatic
adjustment of firepower,
€. The sealing performance of this furnace door is not as
good as that of the vertical furnace door, and it is sealed
and pressed by the weight of the furnace door.Capacity
Fumace ype
Furnace shape
Mebing rate
ic pressure
Temp. accuracy
Gas consumption
Max. working temp,
Max temp. conto
Combustion system
3.100%
ing
Rectangle, round
2-8 AL /hour
5.10043
asc
= Smt Al Natural ga)
1050
sore
Regenerate/high temperature ans
Tigh speed burer
2. Characteristics
2. 1 can control the flow of liquid
meta, the sensors are used to measure
the weight of the liquid metal in the
furmace, so as to prepare alloy
. According to the need, it can be
designed into unilateral and bilateral
Liking,
«The upper layer of high-temperature
molten aluminum without slag is
released first, which meets the process
requirements for the temperature of
the molten aluminum atthe beginning
of casting,
4. The aluminum water is poured
cleanly, and the alloy composition is
uniform,
1. The furnace can be washed and the
alloy variety can be changed in a short
1. Easy t0 operation,
BIHOWAND1. Technical Parameters
Capacity
Fumace type
Furnace shape
Roof structure
Ale presure
Temp. accuracy
as consumption
Max, working temp,
Max temp conto
Furnace door type
contol made
Combustion system
3-1000/(aluminum wate)
Stationary
Rectangle round
Flat top, vault, dome type
5-100KP
35
= 1S Naturl ga)
1050
more
Vertical door and ciagonal
PLC fl automatic and manual
Regeneratve/High temperature ano
genera aped burr
7
2. Characteristics
1, Simple structure, easy to maintain,
b. Accurate temperature control
4. Heat preservation performance: is
good.
The stucture ofthe holding furnace
is similar to the meiting furnace, s0 in
‘an emergency, it can be used as the
melting furnace in a short time to
“ensue production
2 piouandCapacity
Fumace ype
Furnace shape
Conti mode
ie pressure
Temp. accuracy
Gas consumption
Max. working temp,
Max temp. conto
Combustion system
3-100U(aluminum wate)
Ting
Rectangle, round
PAC fll automatic and manuel
5.10043
*c
S1Sm/t Al Natural gas)
ose
00
Regeneratve/high temperature and
Tigh speed burer
2 piouand
2. Characteristics
1. Adopt the laser liquid level contol instrument to realize the
stability of the downstream casting flow and the constant
pressure
'b, Make the liquid level in the furnace and the launder at the
same level, so as to reduce the secondary slag inclusion and air
suction caused by the turning of the water.
«-The upper layer of high-temperature molten aluminum without
slag i released fist, which meets the process requirements for
the temperature of the molten aluminum at the beginning of
costing
4. The aluminum water is poured cleanly, and the alloy
composition is uniform
€@. According to the need, it can be designed ito unilateral
bilateral iting,
{Easy t0 operation,