Professional Documents
Culture Documents
1
Central University of Haryana
Department of Electrical Engineering, School of Engineering and Technology
B.Tech. 3rd YEAR (SEMESTER – V)
Dr.Dr.
Manish
ManishKumar
Kumar Dr. Sumit
Dr. Sumit Dr. Kalpana Chauha
Dr. Kalpana
Prof. J.S. Saini 2 Prof. Ashwani Kumar Dr. Ajay Kumar Bansal
Prof. J.S. Saini Prof. Ashwani Kumar Dr. Ajay Kumar Bansal
Central University of Haryana
Department of Electrical Engineering, School of Engineering and Technology
B.Tech. 3rd YEAR (SEMESTER – VI)
Sl. Course Code Course Title Teaching Schedule
No. Credits
L T P
DEPT. OF ELECTRICAL ENGG.
1 BT EE601A Power Systems – II CENTRAL UNIVERSITY3OF HARYANA 1 ,0MAHENDERGARH4
2 BT EE602A Power Systems Laboratory – II DEPT. OF 0 ELECTRICAL
0 2 ENGG.1
Proceedings / Minutes of the Meeting
3 BT EE603A Microprocessor& Micro-controller CENTRAL UNIVERSITY 3 OF H1ARYANA 0 , MAHENDERGARH
4
of Board of Studies in Electrical Engg. Held on 29.04.2020
Microprocessor & Micro-controller - 0 -of2the Meeting
4 BT EE604A Proceedings 0 -/ Minutes 1
Laboratory of Board of Studies in Electrical Engg. Held on 29.04.2020
The online
5 BT EE605A Electronics Design meeting
Laboratoryof the Board0 of Studies in Electrical Engg. was h
- 0- -4 2
29.04.2020.
Applications The following
of Psychology in were present
6 BT EE606A The online meeting of the Board of 3Studies 0in Electrical 0 3 was held on 29.04
Engg.
Engineers Life Kumar Bansal,
1. following
Dr. Ajay HOD, EE- Chairperson
were present
7 Program Elective 2.– Prof.
3 J.S. Saini, Subject Expert- Member
BT EE621 Electromagnetic
3. 1.Prof. AjayWaves
Dr. AshwaniKumar Bansal,Subject
Kumar, HOD, EE- Chairperson
3
Expert- 0
Member 0 3
2.
4. & Prof.
Dr.Solar J.S.
Rajesh Saini,
Kumar Subject Expert-
Dubey, AssociateMember
BT EE622 Wind Energy Systems 3 Professor,
0 0 CUH-3Member
3. Prof. Ashwani Kumar, Subject Expert- Member
5. Dr. Energy
Electrical Munish Manas, Assistant Professor, CUH- Member
BT EE623 4. Dr. RajeshConservation
Kumar Dubey, and
Associate3Professor, 0 CUH- 0 Member 3 Invitee
6. Dr. Kalpana Chauhan, Assistant Professor,
Auditing CUH-Special
5. Dr. Munish Manas, Assistant Professor, CUH- Member
BT EE624 7. 6.Dr.
Digital Manish
Control
Dr. Kumar,
Systems
Kalpana Chauhan, Assistant
Assistant Professor,
3
Professor, 0CUH-
CUH- 0Special
Special 3 Invitee
Invitee
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
8 Program Elective –7.4 Dr. Manish Kumar, Assistant Professor, CUH- Special Invitee
9. 8.Dr.Dr.
Murlidhar,
Sumit,and Assistant
Assistant Professor,
Professor, CUH- SpecialCUH-Special
Invitee Invitee
Line Commutated Active
BT EE631 9. Dr. Murlidhar, Assistant Professor, 3 0
CUH- Special by 0
Invitee 3
Rectifiers
After deliberations, it was resolved/ recommended the Board of Studies as foll
BT EE632 HVDC Transmissionit was resolved/ recommended
After deliberations, 3 by0 the Board0 of Studies3 as follows:
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (E
BT EE633 Utilization of Electric Power and th
1.Engg.)- III year
The Scheme (5thand&6Examinations
of Studies semesters) 3 and were discussed
0the Syllabi
0 of B.Tech.3and (Electrical
approvedEngg.)-
for th
Traction
and 6th onwards(
2018-19 semesters) towere discussed and from
be implemented approvedsession for the Batch 2018-19
2020-21) onwar
(Annexure-1
BT EE634 Digital Signal Processing
implemented from session 2020-21) 3(Annexure-1).
0 0 3
2. The BoS apprise the start of Ph.D. program in Department of E
9 Program Elective –2.Engineering.
5 The BoS apprise ThetheScheme
start of Ph.D. program in
of Studies & Department
Examinations of Electrical
and theEngineering.
Syllabi oT
BT EE641 of Studies
Sensors(Electrical
and Transducers& Examinations
Engg.)- were discussed and the Syllabi of
3 and 0approved Ph.D. (Electrical Engg.)-
0 for 3the Batch 2020-21 were dis
o
approved for the Batch 2020-21 onwards (Annexure-2).
BT EE642 Fuzzy (Annexure-2).
Systems 3 0 0 3
3. Due to CoVID-19 pandemic, the internship policy for III year and final year st
BT EE643 3. Due
Analog and to CoVID-19
Digitaland pandemic,
Communication the internship
3 the in-plant
0 policy
0training in3for III year and fin
discussed it was recommended that not possible in present
students was discussed and it was recommended that the in-plant trainin
BT EE644 Optimization Techniques that either work from
was recommended 3 home 0 internship,
0 Project
3 work, review semin
possible
problems, in certificate
present coursescenario. It was organizations
from reputed recommended that
will be either as
considered work from
Internshi
Total 18 03 08 24
4.internship,
It was alsoProject
recommended work,thatreview
20% of seminar on in
the courses latest
each problems,
semester maycertificate
be comple
NOTE: - Examinees will be fromallowed
reputedto use only non-programmable
organizations
MOOC/ Swayam/ NPTEL courses. will be scientific
considered as calculators
Internship. in
the examination. Other electronic
4. It wasgadgets and sharing of materials
also recommended that 20% willofnotthe
be permitted
courses during in each semester m
the examinations. At the end of 6th
completed semester,
The meeting through each student
MOOC/
ended with has
Swayam/
vote of to undergo
thanks to theNPTEL Summer
Chair.courses. Internship
of at least 6 weeks from the industry / institute /research lab / training centre, etc. during
summer vacation & its evaluation shall be carried out in 7th Semester.
The meeting ended with vote of thanks to the Chair.
Dr.Dr.
Manish
ManishKumar
Kumar Dr. Sumit
Dr. Sumit Dr. Kalpana Chauha
Dr. Kalpana
3
Prof. J.S. Saini Prof. Ashwani Kumar Dr. Ajay Kumar Bansal
Prof. J.S. Saini Prof. Ashwani Kumar Dr. Ajay Kumar Bansal
POWER ELECTRONICS
Course Code: BT EE 501A SEMESTER-V
L T P Credits
3 1 - 4
Course Level Learning Outcomes:
At the end of this course, students will demonstrate the ability to
1. Understand the differences between signal level and power level devices.
2. Analyse controlled rectifier circuits.
3. Analyse the operation of DC-DC choppers.
4. Analyse the operation of voltage source inverters.
Unit -I
Power switching devices: Diode, Thyristor, MOSFET, IGBT: I-V Characteristics; Firing
circuit for thyristor; Voltage and current commutation of a thyristor; Gate drive circuits for
MOSFET and IGBT. Protection of Devices.
Diode rectifiers withDpassive EPT. OFfiltering:
ELECTRICAL Half-wave
ENGG. diode rectifier with RL and RC loads; 1-
phase full-wave diode rectifier
CENTRAL UNIVERSITY OF HARYANA, M with L, C and LCAHENDERGARH
filter; 3-phase diode rectifier with L, C and
LC filter; continuous and discontinuous conduction, input current wave shape, effect of
source inductance; Proceedings
commutation / Minutes
overlap. of the Meeting
of Board of Studies in Electrical Engg. UnitHeld-II on 29.04.2020
- - -
Thyristor rectifiers: Single-phase half-wave and full-wave rectifiers, Single-phase full-bridge
DEPT. OF ELECTRICAL ENGG.
thyristor rectifier with R- load and highly inductive load; Three-phase full-bridge thyristor
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
rectifier with R-load and highly inductive load; Input current wave shape and power factor.
29.04.2020. The following were present
Proceedings / Minutes of the Meeting Unit -III
1. Dr. Ajay DC-DC of
KumarBoard of Studies
buckBansal,
converter: in
HOD, Electrical
Elementary Engg.
EE- Chairperson Held on
chopper 29.04.2020
with an active switch and diode, concepts of
duty ratio and average - - power
voltage, - circuit of a buck converter, analysis and waveforms at
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. steady
Ashwani
The online state,ofKumar,
meeting duty
the Boardratio ofcontrol
Subject inofElectrical
StudiesExpert- output voltage.
Member
Engg. was held on 29.04.2020. The
4. Dr. DC-DC
following
Rajesh boost
were present converter: Power
Kumar Dubey, Associate Professor, CUH- circuit of a boost converter,
Member analysis and waveforms at steady
state, relation between duty ratio and average output voltage.
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
CHOPPERS : BasicEE- Chairperson
scheme, output voltage control techniques, one, two, and four quadrant
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
choppers,
3. Prof. AshwaniKumar,
step up
Kumar, Subject
chopper,
Expert- Member
voltage commutated chopper, current commutated chopper,
7. Dr. Manish Assistant Professor, CUH- Special Invitee
4. Dr.MOSFET
Rajesh Kumarand transistor
Dubey, based choppers.
Associate Professor, CUH- Member
8. Dr. Sumit, Assistant Professor, CUH-Special UnitInvitee
-IV
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr.Single-phase Assistant
Kalpana Chauhan,voltage Professor,
sourceCUH-
Assistant Professor, CUH-Special
inverter: Power circuit
Special Invitee Invitee of single-phase voltage source inverter,
7. Dr.switch states and instantaneous output voltage, square waveofoperation
Manish Kumar, Assistant Professor, CUH- Special
After deliberations, it was resolved/ recommended by the Board Invitee
Studies of asthe inverter, concept
follows:
8. Dr.ofSumit, Assistant Professor, CUH- Special Invitee
average voltage over a switching cycle, bipolar sinusoidal modulation and unipolar
1. The9. Dr.sinusoidal
Murlidhar, Assistant
Scheme Professor, modulation
of Studies
modulation, CUH- Special Invitee
& Examinations index and and the voltage
output Syllabi of B.Tech. (Electrical
th th
Engg.)-
After Three-phase
III ityear
deliberations, (5voltage
and
was resolved/ 6source
recommended byinverter:
semesters) of Power
the Boardwere ascircuit
follows: ofand
discussed
Studies a three-phase
approvedvoltagefor the source
Batch inverter,
2018-19switch states, instantaneous
onwards( to be implemented output voltages, from session average2020-21)
output voltages over
(Annexure-1). a sub-cycle, three-
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
phase
2. Theand BoS sinusoidal
apprise modulation.
the start of Ph.D.
6th semesters) were discussed and approved for theprogram
Batch 2018-19inonwards Department
( to be of Electrical
Engineering.
implemented from The
sessionScheme of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
2. TheSuggested
(Electrical Engg.)-
BoS apprise Readings:
the startwere
of Ph.D.discussed
program in Departmentand approved for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of 1.
(Annexure-2). Bimbhra,
Studies & P.
Examinations S., and
and the Surinder
Syllabi of Kaur.
Ph.D. Power
(Electrical Electronics.
Engg.)- were Khanna
discussed and publishers, 2012.
2.
approved Erickson,
for the BatchRobert W.,
2020-21 onwards and Dragan
(Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and Maksimovic. Fundamentals of power electronics.
final year
3. Due to Springer Science & Business Media, 2007.
CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it wasNed,
recommended and it
that the was recommended
in-plant training that the in-plantIt electronics:not
training in
3. Mohan, Tore M. Undeland, andinWilliam
not possibleP.in Robbins.
present scenario.
Power converters,
possible in present
was recommended that scenario.
either work from It was
home recommended
internship, Project work, review that either
seminar on work from home
latest
applications, and design. John wiley & sons, 2007.
internship,
4. Rashid, Project
problems, certificate coursework,
M. H.fromPower review
reputed seminar
organizations
Electronic will be on
Circuits, latest
considered
Devices, problems,
as Internship. certificate
and Applications. courseof West
University
4. It was
from also recommended
reputed organizationsthat 20% ofwill the courses
be in each semesterasmay
considered be completed through
Internship.
MOOC/also
Florida.
Swayam/
Pearson Prentice Hall, 2014.
NPTEL courses. that 20% of the courses in each semester may be
4. It was recommended
5. Umanand L. Power Electronics: Essentials and Applications. Wiley India P. Ltd., 2009.
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
L T P Credits
- - 2 1
LIST OF EXPERIMENTS:
1. To plot the characteristics of diode, thyristor, triac, transistor and MOSFET.
2. Firing angle control of R and R-C firing circuits, UJT firing circuits.
3. Develop the complementary voltage commutation using ring counter.
4. To demonstrate the performance of three phase diode bridge rectifier with filter.
5. To analyse the performance of full wave converter.
6. To verify the performance of A.C. phase control.
7. To analyse the performance of buck, boost chopper.
8. To verify the
DEPTperformance of single
. OF ELECTRICAL phase
ENGG . inverter.
9. To demonstrate the performance of H-
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH bridge inverter.
10. To demonstrate the performance of three-phase inverter.
Proceedings / Minutes of the Meeting
of Board
Suggested of Studies in Electrical Engg. Held on 29.04.2020
Readings:
1. Arora, O. P., and Arora, O. - P.- Power- Electronics Laboratory: Theory, Practice And
DEPT. OF ELECTRICAL ENGG.
Organization. Alpha Science International, Limited, 2007.
The online meeting
CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA in Electrical Engg. was held on
MAHENDERGARH
29.04.2020. The following were present
Proceedings / Minutes of the Meeting
of Board of
Note:Kumar Bansal,
1. Dr. Ajay Studies HOD,
in Electrical
EE-Engg. Held on 29.04.2020
Chairperson
1. At least 10 experiments - - are -to be performed by students in the semester.
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof.
The online 2.meeting
Ashwani At least
Kumar,
of 8 experiments
the Board Subject should
of StudiesExpert- be performed
Member
in Electrical Engg. from theTheabove list; remaining two
was held on 29.04.2020.
4. following
Dr. Rajesh experiments
were present may either be performed
Kumar Dubey, Associate Professor, CUH- Member from the above list or designed and set by the
Dept. as per the scope of the syllabus.
5. Dr. Munish
1. Dr. Ajay KumarManas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
7. 3. Prof.
Dr. AshwaniKumar,
Manish Kumar, Subject Expert- Member
Assistant Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- Member
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Chauhan,Assistant Professor,
Assistant Professor, CUH-Special
CUH- Special Invitee Invitee
7. Dr. Manish Kumar, Assistant Professor, CUH- Special Invitee
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
9. Dr.Scheme
1. The Murlidhar, Assistant Professor, CUH-
of Studies Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS apprise
6th semesters) the start
were discussed of Ph.D.
and approved for theprogram
Batch 2018-19inonwards
Department
( to be of Electrical
Engineering.
implemented from The Scheme
session of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical Engg.)-
2. The BoS apprise the startwere
of Ph.D.discussed and approved
program in Department for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of Studies
(Annexure-2). & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it was recommendedand it in-plant
that the was recommended
training in not possible that thescenario.
in present in-plantIt training in not
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
internship, Project
problems, certificate coursework, review
from reputed seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
MOOC/also
4. It was Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
L T P Credits
3 1 - 4
UNIT-I
INTRODUCTION TO DEPT CONTROL
. OF ELECTRICAL PROBLEM: ENGG. Industrial Control examples. System /
Plant model, types of models,
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARHillustrative examples of plants & their inputs and outputs,
controller, servomechanism, regulating system, linear time invariant (LTI) system, time-
varying system,Proceedings causal system,/ Minutes open loopof&the Meeting
closed loop control system & their illustrative
of Board
examples, of Studies
continuous time in Electrical
and sampled Engg. data Held on 29.04.2020
control systems. Effects of feedback on
- - -
sensitivity (to parameter variations), stability, external disturbance (noise), overall gain, etc.
DEPT. OF ELECTRICAL ENGG.
Introductory remarks about non-linear control systems.
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
MATHEMATICAL MODELLING: Concept of transfer function, relationship between
29.04.2020. The following were present
transfer function and impulse
Proceedings / Minutesresponse, order of a system, block diagram algebra, signal flow
of the Meeting
1. Dr. Ajay graphs: of
KumarBoard
Mason’s of Studies
Bansal, in
gain formula Electrical
HOD, EE- Engg.
& its Held on 29.04.2020
application,
Chairperson characteristic equation, derivation of transfer
functions of electrical and - -
electromechanical- systems. Transfer functions of cascaded and non-
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. loading
Ashwani
The online cascaded
meeting Kumar,
of elements.
the Board Subject
of StudiesExpert-in ElectricalMember
Engg. was held on 29.04.2020. The
4. Dr.following
Rajeshwere present
Kumar Dubey, Associate Professor, UNIT-II CUH- Member
STATE VARIABLE ANALYSIS: Concepts of state, state variable, state model, state
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant Professor, CUH- Member
models forBansal,
linearHOD, EE- Chairperson
continuous time functions, diagonalization of transfer function, state
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
transition
3. Prof. AshwaniKumar,
matrix,
Kumar, Subject
solution of
Expert- Member
state equations, concept of controllability & observability.
7. Dr. Manish Assistant Professor, CUH- Specialtime Invitee
4. Dr.TIME
Rajesh KumarDOMAIN ANALYSIS:
Dubey, Associate Professor, CUH-TypicalMember test signals, response of first order systems to
8. Dr. Sumit,
various Assistant
standard Professor,
inputs, time CUH-Special
response of 2nd Invitee
order system to step input, relationship between
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr.location Assistant
of roots
Kalpana Chauhan, Professor,
of characteristics
Assistant Professor, CUH- SpecialCUH-Special
equation Invitee
Invitee and stability, time domain specifications of a
7. Dr.general
Manish Kumar, and an under-
Assistant damped
Professor, 2
CUH- Special nd Invitee
order system, steadyofstate errorasand error constants,
After deliberations, it was resolved/ recommended by the Board Studies follows:
8. Dr.dominant
Sumit, Assistant Professor, CUH- Special Invitee
closed loop poles, concept of stability, pole-zero configuration and stability,
1. The9. Dr.necessary
Murlidhar, Assistant
Scheme and Professor, CUH-
of Studies
sufficient Special Invitee
&conditions
Examinations and the
for stability, Syllabi
Hurwitz of B.Tech.
stability (Electrical
criterion, Routh stability
th th
Engg.)-
After criterion
deliberations, andresolved/
III ityear
was (5relative
and 6stability.
semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented fromUNIT-III session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. TheandROOT BoS LOCUS TECHNIQUE:
apprise
6th semesters) the start
were discussed of Ph.D.
and approved
Root locus
for theprogram
concept, development
Batch 2018-19inonwards Department
( to be
ofofrootElectrical
loci for various
systems,from
Engineering.
implemented stability
The
session considerations.
Scheme
2020-21) of Studies & Examinations and the Syllabi of Ph.D.
(Annexure-1).
FREQUENCY
(Electrical
2. The BoS appriseEngg.)- DOMAIN
the startwere
of Ph.D.discussed
program ANALYSIS: of Relationship
and approved
in Department for the
Electrical Engineering.between
Batch
The frequency
Scheme2020-21response
onwards and time-
ofresponse for 2nd order
Studies & Examinations
(Annexure-2). and the system,
Syllabi of polar,
Ph.D. Nyquist, Bode were
(Electrical Engg.)- plots, stability,
discussed and Gain-margin and Phase
Margin,
approved relative
for the stability,
Batch 2020-21 onwards frequency
(Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year response specifications.
3. Due to CoVID-19 pandemic, the internship policy for IIIUNIT-IV year and final year students was
students
discussed was discussed
and it was recommended and it was
that the in-plant recommended
training in not possible that thescenario.
in present in-plantIt training in not
COMPENSATION: Necessity of compensation, compensation networks, application of lag
possible
was in present
recommended that eitherscenario.
work from It was
home recommended
internship, Project work, review that either
seminar latestwork from
onproportional home
and lead compensation, basic modes of feedback control, (P), integral (I),
internship,
derivative(D), Project
problems, certificate coursework,
PI and review
from reputed
PID seminar
organizations
controllers, will be on
Tuning latest
considered problems,
as Internship.
of analog certificatethrough
PID controllers courseZiegler-
4. It was
from also recommended
reputed organizationsthat 20% ofwill the courses
be in each semesterasmay
considered be completed through
Internship.
Nichols
MOOC/also
tuning
Swayam/
methods (Process reaction curve and Ultimate Gain & Period methods)
NPTEL courses. that 20% of the courses in each semester may be
4. It was recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
Suggested Readings:
1. Dorf, Richard C., and Robert H. Bishop. Modern Control Engineering. Pearson
Prentice-Hall, 2011.
2. Gopal, Madan. Control systems: principles and design. Tata McGraw-Hill Education,
2002.
3. Hussain, A., and Haroon, A. Control Systems. Dhanpat Rai Publishers, 2014.
4. Katsuhiko, Ogata. Modern control engineering. Pearson, 2010.
5. Kuo, Benjamin C. Automatic control systems. Prentice Hall PTR, 2014.
6. Nagrath, I. J., and Madan Gopal. Textbook of control systems engineering . New Age
International, 2009.
7. Ogata, Katsuhiko,
DEPT. OFandEYanjuan Yang.
LECTRICAL ENGGModern
. control engineering. Vol. 5. India:
Prentice hall, 2010.
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH
8. Sukhla, R. C. Control Systems. Dhanpat Rai Publishers, 2011.
Proceedings / Minutes of the Meeting
of Board of Studies in Electrical Engg. Held on 29.04.2020
- - -
DEPT. OF ELECTRICAL ENGG.
The online meeting
CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA in Electrical Engg. was held on
MAHENDERGARH
29.04.2020. The following were present
Proceedings / Minutes of the Meeting
of Board of Studies HOD,
1. Dr. Ajay Kumar Bansal, in Electrical
EE-Engg. Held on 29.04.2020
Chairperson
- - -
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. Ashwani
The online meeting of Kumar,
the BoardSubject
of StudiesExpert- Member
in Electrical Engg. was held on 29.04.2020. The
4. following
Dr. Rajeshwere present
Kumar Dubey, Associate Professor, CUH- Member
5. Dr. Munish
1. Dr. Ajay KumarManas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
7. 3. Prof.
Dr. AshwaniKumar,
Manish Kumar, Subject Expert- Member
Assistant Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- Member
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Chauhan,Assistant Professor,
Assistant Professor, CUH-Special
CUH- Special Invitee Invitee
7. Dr. Manish Kumar, Assistant Professor, CUH- Special Invitee
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
9. Dr.Scheme
1. The Murlidhar, Assistant Professor, CUH-
of Studies Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS apprise
6th semesters) the start
were discussed of Ph.D.
and approved for theprogram
Batch 2018-19inonwards
Department
( to be of Electrical
Engineering.
implemented from The Scheme
session of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical Engg.)-
2. The BoS apprise the startwere
of Ph.D.discussed and approved
program in Department for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of Studies
(Annexure-2). & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it was recommendedand it in-plant
that the was recommended
training in not possible that thescenario.
in present in-plantIt training in not
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
internship, Project
problems, certificate coursework, review
from reputed seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
MOOC/also
4. It was Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
L T P Credits
- - 2 1
L T P Credits
3 1 - 4
Unit I
Economic Decisions Making: Overview, Problems, Role, Decision making process.
Engineering Costs & Estimation: Fixed, Variable, Marginal & Average Costs, Sunk Costs,
Opportunity Costs, Recurring DEPT. OFAnd Nonrecurring
ELECTRICAL ENGGCosts,
. Incremental Costs, Cash Costs vs Book
Costs, Life-Cycle Costs; Types Of Estimate,
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH Estimating Models - Per-Unit Model, Segmenting
Model, Cost Indexes, Power-Sizing Model, Improvement & Learning Curve, Benefits. Case
Study - Price and Proceedings
Income Elasticity / Minutes of the in
of Demand Meeting
the real world
of Board of Studies in Electrical Engg. UnitHeld
II on 29.04.2020
Cash Flow, Interest and Equivalence: - - - Flow – Diagrams, Categories & Computation,
Cash
DEPT. OF ELECTRICAL ENGG.
Time Value of Money, Debt repayment, Nominal & Effective Interest.
The online meeting CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA MAHENDERGARHin Electrical Engg. was held on
Unit III
29.04.2020. The following were present
Cash Flow & Proceedings Rate Of Return / MinutesAnalysis: Calculations, Treatment of Salvage Value, Annual
of the Meeting
CashKumar
1. Dr. Ajay of Board of
Flow Analysis, Studies in
Bansal,Analysis Electrical
HOD, EE- Engg.
Periods; Held on 29.04.2020
Internal
Chairperson Rate Of Return, Calculating Rate of Return,
Incremental Analysis; Best - -
-Alternative Choosing An Analysis Method, Future Worth
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. Analysis,
meetingBenefit-Cost
Ashwani
The online Kumar,
of of Ratio
the BoardSubject Analysis,
StudiesExpert- Sensitivity
Member
in Electrical And
Engg. was held Breakeven
on 29.04.2020. TheAnalysis. Economic
Analysis
following
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- Member & drawbacks. Case Study
In
were present The Public Sector - Quantifying And Valuing Benefits
Unit IV
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
Inflation And Price Change: Definition, Effects, Causes, Price Change with Indexes, Types
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
of Ashwani
3. Prof.
Index,Kumar,Composite
Subject
vs Commodity Indexes, Use of Price Indexes In Engineering Economic
Expert- Member
7. Dr. Manish Kumar, Assistant Professor, CUH- Special Invitee
4. Dr.Analysis,
Rajesh Kumar Cash
Dubey,Flows that
Associate inflateCUH-
Professor, at different
Member Rates.
8. Dr. Sumit, Assistant Professor,End-Of-Year
CUH-SpecialConvention,
Invitee
5. Dr.Present
Munish Manas,Worth Analysis:
Assistant Professor, CUH- Member Viewpoint Of Economic Analysis
9. Dr. Murlidhar,
6. Dr.Studies, Assistant
Borrowed
Kalpana Chauhan, Professor,
AssistantMoney CUH-Special
Professor,Viewpoint, Invitee
Effect Of Inflation & Deflation, Taxes, Economic
CUH- Special Invitee
After deliberations, it was resolved/ recommended byMultiple
7. Dr.Criteria, Applying
Manish Kumar, AssistantPresent
Professor, Worth Techniques,
CUH- Special Invitee
the Board Alternatives.
of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
9. Dr.Suggested
1. The Murlidhar, Assistant
Scheme of Professor, CUH-
Studies
Readings: Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III 1.
deliberations, wasBrown,
ityear (5 and
resolved/ Thane. Engineering
6 semesters)
recommended ofeconomics
by the Boardwere discussed
Studies and economic
as follows: designfor
and approved for the
process
Batchengineers.
2018-19 onwards( CRC Press,
to be 2016.
implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS 2. Lindeburg,
apprise the startMichael R. Engineering
of Ph.D. Economic Analysis: An Introduction.
6th semesters) were discussed and approved for theprogram
Batch 2018-19inonwards
Department
( to be of Electrical
Engineering.
implemented from Professional
The 2020-21)Publications
Scheme
session of Studies
(Annexure-1). Incorporated,
& Examinations 1993. and the Syllabi of Ph.D.
(Electrical 3. Newnan,
Engg.)-
2. The BoS apprise the startwere Donald
of Ph.D.discussed G., Ted Eschenbach,
and approved
program in Department andforJerome
the The
of Electrical Engineering. P.Scheme
Batch Lavelle. Engineering
2020-21 onwardseconomic
analysis. and
of Studies & Examinations
(Annexure-2). Vol.the2.Syllabi
Oxford University
of Ph.D. (Electrical Press,
Engg.)- 2004.
were discussed and
3. Due to CoVID-19 pandemic, the internship policy PHI
approved for4.the Panneerselvam,
Batch 2020-21 onwardsR. Engineering
(Annexure-2). economics. for Learning
III year Pvt.and Ltd.,
final2013.
year
5. Riggs, J. L., Bedworth, D. D. and Randhawa, S. U. Economics for Engineers. 4th edi.
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students was discussed
discussed and it was recommended and it was
that the in-plant recommended that the in-plant training in not
Tata McGraw-Hill, 2004.training in not possible in present scenario. It
possible in present
was recommended scenario.
that either work from home It was recommended
internship, that eitherlatestworkKoelling.
from home
6. Sullivan, William G., Elin Project work, reviewand
M. Wicks, seminar
C.onPatrick Engineering
internship, Project
problems, certificate coursework,
economy. review
from reputed
Pearson seminar
organizations
Higher will be on
Ed, latest
considered
2014. problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill the courses in each semesterasmay be completed through
MOOC/
7. organizations
Swayam/
White,
NPTEL
John A., Marvin
courses.
be considered
H. Agee, and Internship.
Kenneth E. Case. Principles of engineering
4. It was also recommended
economic analysis. thatWiley,
20% 1989. of the courses in each semester may be
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
L T P Credits
0 0 4 2
UNIT-I
Introduction of electrical DEPT. machineOF ELECTRICAL design:EIntroduction
NGG. Major Considerations in electrical
machine C design, electrical engineering
ENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH materials, space factor, choice of specific electrical and
magnetic loadings, thermal considerations, heat flow, temperature rise, rating of machines.
Transformers: Proceedings Sizing of a transformer, / Minutes main of thedimensions,
Meeting kVA output for single- and three-
phase of Board
transformers, of Studies window in Electrical
space factor, Engg.overall
Held ondimensions,
29.04.2020operating characteristics,
- - -
regulation, no load current, temperature rise in transformers, design of cooling tank, methods
DEPT. OF ELECTRICAL ENGG.
for cooling of transformers.
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
UNIT-II
29.04.2020. The following were present
Induction Motors: ProceedingsSizing/ Minutes
of an induction
of the Meeting motor, main dimensions, length of air gap, rules for
1. Dr. Ajay selecting of
KumarBoard
rotor of Studies
slots ofHOD,
Bansal, in Electrical
squirrelEE- cageEngg. machines,29.04.2020
Held
Chairperson on design of rotor bars & slots, design of end rings,
design of wound rotor, - -
magnetic - leakage calculations, leakage reactance of poly- phase
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. machines,
Ashwani
The online meeting magnetizing
Kumar,
of of current,
the BoardSubject in short
StudiesExpert- circuit
Engg. current,
Member
Electrical was held on circle diagram,
29.04.2020. The operating characteristics.
4. Dr.following
Rajeshwere present
Kumar Dubey, Associate Professor, CUH- Member UNIT-III
Synchronous Machines: Sizing of a synchronous machine, main dimensions, design of salient
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
pole machines, shortEE- Chairperson
circuit ratio, shape of pole face, armature design, armature parameters,
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
estimation
3. Prof. AshwaniKumar,
of air gap
Kumar, Subject
length,
Expert- Member
design of rotor, design of damper winding, determination of full
7. Dr. Manish Assistant Professor, CUH-
designSpecial
of turboInvitee
4. Dr.load
Rajeshfield
Kumar mmf,
Dubey,design
AssociateofProfessor,
field winding,
CUH- Member alternators, rotor design.
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
UNIT-IV
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr.Limitations
Kalpana Chauhan, Assistant
(assumptions) Professor,
Assistant Professor, of CUH- CUH-Special
traditional
Special designs, need
Invitee Invitee for CAD analysis, synthesis and hybrid
7. Dr.methods,
Manish Kumar, design optimization
Assistant Professor, CUH- methods,
Special Inviteevariables, constraints and objective function, problem
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr.formulation.
Sumit, Assistant Introduction
Professor, CUH- Special Invitee
to FEM based machine design. Introduction to complex structures of
1. The9. Dr.modern
Murlidhar,machines-PMSMs,
Scheme Assistant Professor, CUH-
of Studies Special Invitee
& Examinations
BLDCs, SRM and andclaw-pole
the Syllabi of B.Tech. (Electrical
machines.
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19Suggestedonwards( Readings:
to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand1.BoS Murthy,
apprise
6th semesters)
Vishnu,
the start
were discussed
K. M.ofComputer-Aided
and approved Ph.D. for theprogram
Design Department
Batch 2018-19inonwards
of Electrical Machines.
( to be
Hyderabad,
of Electrical
Engineering.
implemented India:
from BS Scheme
The
sessionPublications, 2008. & Examinations and the Syllabi of Ph.D.
of Studies
2020-21) (Annexure-1).
2.
(Electrical Narang,
2. The BoS appriseEngg.)- K. L.
the startwere A Text
of Ph.D.discussed Book ofand
program in Department Electrical
approved Engineering
of Electrical for the The
Engineering. Drawings.
BatchScheme Satyaonwards
2020-21 Prakashan, 1969.
of3.StudiesSawhney
(Annexure-2). & Examinations A. K., and and Chakrabarti.
the Syllabi A. Course
of Ph.D. (Electrical in were
Engg.)- Electrical
discussedMachine
and Design. Dhanpat Rai
approved for Pub. 2010.
the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due4. to CoVID-19
Sawhney, A. K.theA internship
pandemic, Course policy in Electrical
for III yearMachine
and final yearDesign,
studentsDhanpat
was Rai Pub. 1999.
students
discussed was
and discussed
it was and it was recommended that the in-plant training in not
5. Say, M.recommended
G. Performance that the in-plant training in of
and Design not AC
possible in present scenario.
Machines. English It LBS., 1995.
possible
was in present
recommended that scenario.
either work from It was
home recommended
internship, Project work, review that either
seminar on work from home nd
latest
6. Sen, S. K. Principles of Electrical Machine Design with Computer Programs. 2 ed.,
internship, Project
problems, certificate
Oxford coursework,
and IBH review
from reputed seminar
organizations
Publishing, 2006. will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses
be in each semesterasmay
considered be completed through
Internship.
7. Swayam/
MOOC/also
Shanmugasundaram, A. Electrical Machine Design Data Book. New Age International,
NPTEL courses. that 20% of the courses in each semester may be
4. It was 1979. recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
11 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 - - 3
UNIT-I
Energy Action Planning: DEPT.Energy Policy, key
OF ELECTRICAL elements,
ENGG . formulation, ratification, organizing
–locationCof energy management, top energy
ENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH management commitment and support, roles and
responsibilities of energy manager, requirement for energy action planning, evaluating energy
performance, management Proceedings / Minutes
tools for effectiveof the Meeting
energy implementation.
of Board of Studies in Electrical Engg. Held on 29.04.2020
UNIT-II
Financial Management: Introduction, - - need - for investment, appraisal and criteria, financial
DEPT. OF ELECTRICAL ENGG.
analysis techniques for energy management-simple payback period, return on investment, net
The online meeting CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA MAHENDERGARH in Electrical Engg. was held on
present value, internal rate of return, cash flow, sensitivity and risk analysis, financing options,
29.04.2020. The following were present
energy performance contracting
Proceedings / Minutesand of therole of ESCOs developing a typical ESCO contract, A
Meeting
of
case Kumar
1. Dr. Ajay Board of
study forBansal,Studies in Electrical
energy efficiency Engg.
HOD, EE-inChairperson Held
buildings on through
29.04.2020ESCO.
- - - UNIT-III
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. Project
Ashwani
The online Management:
meeting Kumar,
of the BoardSubjectDefinition
of Studies Expert- andMember
in Electrical scope
Engg. wasof held
project, project The
on 29.04.2020. development cycle-technical
design,
following
4. Dr. Rajesh financing,
Kumar Dubey, Associate Professor, CUH- Member monitoring, project planning
were present contracting, implementation and performance
techniques, implementation plan for energy management, planning budget, procurement
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
procedures, construction, measurement and verification.
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
3. Prof. AshwaniKumar,
Kumar, Subject Expert- Member
UNIT-IV
7. Dr. Manish Assistant Professor, DefinitionSpecial
CUH- Invitee
4. Dr.Energy Monitoring
Rajesh Kumar andProfessor,
Dubey, Associate Targeting:
CUH- Member of energy monitoring and targeting, setting up
8. Dr. Sumit,
monitoring Assistant
and Professor,
targeting, key CUH-Special
elements of Invitee
energy monitoring and targeting system, data and
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr.information
Kalpana Chauhan,Assistant
analysis, Professor,
techniques
Assistant Professor, CUH-Special
related
CUH- Special Invitee
Inviteeto energy consumption and production, energy
7. Dr.management information
Manish Kumar, Assistant Professor,system (EMIS).
CUH- Special Invitee
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
9. Dr.Suggested
1. The Murlidhar, Assistant
Scheme of Professor, CUH-
Studies
Readings: Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( 1. Goldthau, to beAndreas,
implemented ed. Thefrom handbook
session of global
2020-21) energy policy. John Wiley & Sons,
(Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS 2016.
apprise the start of Ph.D.
6th semesters) were discussed and approved for theprogram
Batch 2018-19inonwards
Department
( to be of Electrical
Engineering. 2.
implemented from Guide
The books
Scheme
session for
of Studies & Examinations and the Syllabi Manager
National
2020-21) (Annexure-1). Certification Examination for Energy of Ph.D./ Energy
(Electrical
2. The BoS apprise Auditors
Engg.)-
the startwere Book-1,
of Ph.D.discussed General Aspects
and approved
program in Department (available
for the The
of Electrical Engineering. online)
BatchScheme2020-21 onwards
of Studies
(Annexure-2). &3. Smith,
Examinations Craig
and the B.,
Syllabi and
of Kelly
Ph.D. E.
(Electrical Parmenter.
Engg.)- were Energy,
discussed and management, principles:
Applications,
approved for the Batch 2020-21 onwards benefits, savings.
(Annexure-2). Elsevier,
3. Due to CoVID-19 pandemic, the internship policy for III year and final year 2013.
4. Success
3. Due to CoVID-19 pandemic,stories of Energy
the internship Conservation.
policy for III year and final BEE, New Delhi
year students was (www.bee-india.org)
students was discussed
discussed and5.it was recommended and it was recommended that the in-plantIt training in not
Tripathy, S. that
C. the in-plant training
Electric energy in not possible in present
utilization and scenario.
conservation. Tata McGraw-Hill,
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
1991.
internship, Project
problems, certificate
6. coursework,
Turner, Wayne review
from reputed
C., andseminar
organizations will be on
Steve latest
considered
Doty. problems,
as Internship.
Energy management certificate
handbook.course
The Fairmont
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses
be in each semesterasmay
considered be completed through
Internship.
MOOC/also Swayam/
Press, Inc., 2007.
NPTEL courses. that 20% of the courses in each semester may be
4. It was recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
17 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 1 - 4
L T P Credits
- - 2 1
LIST OF EXPERIMENTS:
1. (a) To study some of the commands used in MATLAB.
(b) Compute the voltages of the given network using MATLAB.
2. Draw the flow chart for forming Y-BUS. Write the computer program in MATLAB.
Take any solved numerical question from book and from the Y-BUS. Solve it for
the voltage and currents injected in the buses. Match the result.
3. Draw the flow chart for power system analysis of Gauss Siedel Method. Write
program in MATLAB for performing load flow analysis using Gauss-Siedel
method and DEPT solve . OF theEgiven
LECTRICAL problem, ENGG solve. the problem by hand for one iteration.
4.CENTRAL
Write a MATLAB program
UNIVERSITY OF HARYANA, MAHENDERGARH for the Newton Raphson Method to find the intersection
of the curves.
Proceedings
5. Calculating market/ Minutesclearing of the for
price Meetingsingle sided bidding & obtain share of
of Board of StudiesGencos
participating in Electrical
(Generating Engg.Companies).
Held on 29.04.2020
6. Obtain power solution-of the - given - problem using Fast Decoupled Newton Raphson
DEPT. OF ELECTRICAL ENGG.
method then write program for FDNR method using MATLAB and solve this
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
numerical problem.
29.04.2020. The following were present
7. To Proceedings
obtain dynamic / Minutes response of single area load frequency control using Integral
of the Meeting
of Board
1. Dr. Ajay KumarController. of Studies in Electrical
Bansal, HOD, EE- Chairperson Engg. Held on 29.04.2020
8. ToSubject
developExpert- the Boost- - Buck - Exciter System steady state model & steady state model
2. Prof. J.S. Saini, Member
3. Prof.
The online meeting of
Ashwani IEEE
Kumar,
of the Type-1
BoardSubject
of Studies Excitation
Expert-
in Electrical system
Engg. waswith
Member held compensator
on 29.04.2020. The Block & PID controller and
4. Dr.following
Rajeshwere present compare their responses.
Kumar Dubey, Associate Professor, CUH- Member
9. Stability analysis using equal area criteria & solve the given problem & verify the
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
results of EE- Chairperson
practical & theory.
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
3. Prof.
10.
AshwaniKumar,
Study basic
Kumar, Subject
instructions
Expert- Member
of PSAT software
7. Dr. Manish 11. Study Assistant
basic instructions Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH-ofMember POWERWORLD software
8. Dr. Sumit, Assistant 12. Study Professor,
basic instructions CUH-Special
of PSCAD Invitee
software.
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Chauhan,Assistant Professor,
Assistant Professor, CUH-Special
CUH- Special Invitee Invitee
7. Dr.Note:
ManishTen
After deliberations, it experiments
Kumar,
wasAssistant Professor,
resolved/ are CUH-
to beSpecial
performed,
recommended Invitee out of which at least eight experiments should be
by the Board of Studies as follows:
8. Dr.performed
Sumit, Assistant Professor, CUH- Special Invitee
from above list. Remaining three experiments may either be performed from above
1. The9. Dr.list
Murlidhar,
Scheme Assistant
or designed Professor,
of Studies
& set upCUH- Special
&byExaminations
the Invitee
department and
as per the theSyllabi
scope ofoftheB.Tech.
syllabus.(Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS apprise
6th semesters) the start
were discussed of Ph.D.
and approved for theprogram
Batch 2018-19inonwards Department
( to be of Electrical
Engineering.
implemented from The
sessionScheme of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical Engg.)-
2. The BoS apprise the startwere
of Ph.D.discussed and approved
program in Department for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of Studies
(Annexure-2). & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it was recommendedand that theit in-plant
was recommended
training in not possible that thescenario.
in present in-plantIt training in not
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
internship, Project
problems, certificate coursework,
from reputedreview seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
4. It was MOOC/also Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
21 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 1 - 4
L T P Credits
- - 4 2
Course Level Learning Outcomes: At the end of the course, students will demonstrate the
ability to
1. Understand the practical issues related to practical implementation of applications using
electronic circuits.
2. Choose appropriate components, software and hardware platforms.
3. Design a Printed Circuit Board, get it made and populate/solder it with components.
4. Work as a team with other students to implement an application.
DEPT. OF ELECTRICAL ENGG.
Experiments on:
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH
Basic concepts on measurements; Noise in electronic systems; Sensors and signal conditioning
Proceedings
circuits; Introduction / Minutes
to electronic of the Meeting
instrumentation and PC based data acquisition; Electronic
of Board
system design,ofAnalog
Studies in Electrical
system design, Engg. Heldofonanalog
Interfacing 29.04.2020
and digital systems, Embedded
- - -
systems, Electronic system design employing microcontrollers, CPLDs, and FPGAs, PCB
design and layout;DEPT . OF ELECTRICAL ENGG.
System assembly considerations. Group projects involving electronic
The online meeting
CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA in Electrical Engg. was held on
MAHENDERGARH
hardware (Analog, Digital, mixed signal) leading to implementation of an application.
29.04.2020. The following were present
Proceedings / Minutes of the Meeting
of
Suggested
1. Dr. Ajay Board of Studies HOD,
KumarReadings:
Bansal, in Electrical
EE-Engg. Held on 29.04.2020
Chairperson
1. A. Subject
2. Prof. J.S. Saini, and -K. - Member
S. SedraExpert- -
C. Smith. Microelectronic Circuits. Oxford University Press,
3. Prof.
The online meeting2007.
Ashwani Kumar,
of the BoardSubject
of StudiesExpert- Member
in Electrical Engg. was held on 29.04.2020. The
4. following
Dr. Rajesh 2. Bosshart,
were present W. C. Printed
Kumar Dubey, Associate Professor, Circuit Boards: Design
CUH- and Technology. Tata McGraw Hill,
Member
1983. 5. Ginsberg, G.L. Printed Circuit Design. Tata McGraw Hill, 1991.
5. Dr. Munish
1. Dr. Ajay KumarManas, Assistant
Bansal, HOD, Professor, CUH- Member
3. Ott, H. W.EE- Chairperson
Noise Reduction Techniques in Electronic Systems. Wiley, 1989.
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
3. Prof.
4. Kumar,
P. Horowitz
AshwaniKumar, Subject
and W. Hill. The Art of Electronics. Cambridge University Press, 1997.
Expert- Member
7. Dr. Manish Assistant Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- Member
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
5. Dr.Note:-
Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Assistant
1.Chauhan,
Total Assistant Professor,
ten experiments
Professor, are
CUH- CUH-Special
to beInvitee
Special performed Invitee
in the semester.
7. Dr. Manish2.Kumar,
After deliberations, itAtwas
least eight
Assistant experiments
Professor,
resolved/ CUH- Specialshould
recommended Invitee be performed from the above list. Remaining three
by the Board of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
experiments should be performed as designed and set by the concerned institution as
1. The9. Dr.Scheme
Murlidhar, Assistant
per of the Professor,
Studies
scope of CUH-
& the Special
ExaminationsInvitee
syllabus. and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS apprise
6th semesters) the start
were discussed of Ph.D.
and approved for theprogram
Batch 2018-19inonwardsDepartment
( to be of Electrical
Engineering.
implemented from The Scheme
session of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical Engg.)-
2. The BoS apprise the startwere
of Ph.D.discussed and approved
program in Department for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of Studies
(Annexure-2). & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it was recommendedand it in-plant
that the was recommended
training in not possible that thescenario.
in present in-plantIt training in not
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
internship, Project
problems, certificate coursework, review
from reputed seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
4. It was MOOC/also Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
24 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 - - 3
L T P Credits
3 - - 3
L T P Credits
3 - - 3
UNIT- I
INTRODUCTION: D Terminology:
EPT. OF ELECTRICAL continuous ENGG time,
. discrete-time & digital signals; Basic
structureCofENTRAL digital control scheme and
UNIVERSITY OF HARYANA, MAHENDERGARH brief description of its blocks. Advantages & problems
of digital control, General principles of signal conversion: operation by A/ D & D/A converters,
A/D and D/A converter Proceedings circuits; / Minutes
Sample of andthe holdMeeting
circuit: Mathematical analysis of sampling
process,of Board of Studies
Ideal sampler, Choicein Electrical
of sampling Engg. Held onAliasing;
frequency, 29.04.2020 Sampling theorem, The Hold
- - -
operation, ZOH. Unit sample sequence, Unit step sequence & Unit sinusoidal sequence.
DEPT. OF ELECTRICAL ENGG.
Difference Equation models & Impulse response models for discrete time systems. State space
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
models of discrete systems, state space analysis, Controllability, reachability, reconstructibility
29.04.2020. The following were present
and observability analysis./ Minutes of the Meeting
Proceedings
of Board
1. Dr. Ajay Kumar Bansal, HOD, of Studies in Electrical EE-Engg. Held on 29.04.2020
Chairperson
- - - UNIT- II
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. TRANSFORM
Ashwani
The online meeting of Kumar, DOMAIN
the Board Subject
of Studies PROCESSING:;
Expert-
in Electrical Member
Engg. was Definition of Z-transform;
held on 29.04.2020. The The Z-transforms of
4. Dr. typical
following
Rajesh functions
were present such as Unit sample
Kumar Dubey, Associate Professor, CUH- Member sequence, Unit step sequence, sampled ramp function,
sampled exponential function, sampled sinusoids; Operations with Z transform such as shifting
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant Professor, CUH- Member
(forward &Bansal, HOD,
backward); EE- Chairperson
Z transform Inversion; Final value & Initial value theorems; Transfer
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
function
3. Prof.
models;
AshwaniKumar,Kumar, Subject
Unit delayer Transfer function; Dynamic response; Stability in z-plane; Jury
Expert- Member
7. Dr. Manish Assistant Professor, CUH-
(& the Special
nature ofInvitee
4. Dr.Stability
Rajesh Kumar test;Dubey,
Z-plane Associatepoles v/ s stability
Professor, CUH- Member response functions); Mapping s-plane
8. Dr. Sumit,
to z-plane, Assistant
Bilinear Professor,
transformation. CUH-Special Invitee
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Chauhan, Assistant Professor,
Assistant Professor, CUH-Special
CUH- Special UNIT- Invitee
Invitee III
7. Dr.MODELS
Manish Kumar,OF DIGITAL
Assistant Professor, CUH- CONTROLSpecial InviteeDEVICES & SYSTEMS: z-domain description of
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr.sampled
Sumit, Assistant Professor, CUH- Special
continuous-time plants, Invitee
model of ADC & DAC, Interconnection of discrete-time &
9. Dr. Murlidhar,
1. The continuous
Scheme oftime Assistant Professor,
Studies
systems CUH- & theirInvitee
Special
& Examinations equivalent and transfer
the Syllabi of B.Tech.
functions; (Electricalof digital
Implementation
th th
Engg.)-
After controllers,
III ityear
deliberations, Recursive
(5 and
was resolved/ 6 realizations:
recommendedsemesters)
by the Boardweredirect,
of Studies cascade
as follows: &and
discussed parallel
approved realizations, Non-recursive
for the Batch
2018-19realization;
onwards( Digitalto be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. TheandPID BoS controller:
apprise
6th semesters)
Positional
the start
were discussed
& of velocity
and approved Ph.D. forms; Tuninginrules
for theprogram
Batch 2018-19 onwards
for digital PID.
Department
( to be
Design of digital
of Electrical
control system
Engineering.
implemented The
from with
sessionScheme dead(Annexure-1).
2020-21) beat response.&Practical
of Studies Examinations issues with anddead the beat response
Syllabi design.
of Ph.D.
(Electrical
2. The BoS appriseEngg.)-the startwere
of Ph.D.discussed and approved
program in Department UNIT- IVfor the The
of Electrical Engineering. BatchScheme2020-21 onwards
ofDESIGN
Studies
(Annexure-2). & OF DIGITAL
Examinations and the CONTROL
Syllabi of Ph.D. ALGORITHMS:
(Electrical Engg.)- were Basic
discussed andstructure of digital control
system;
approved Routes
for the to
Batch 2020-21 the design
onwards of digital
(Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final Controller, z-plane specifications of control
year system
3. Duedesign: steady state accuracy, Steady state errors & error constants for type -0,-1,-2 systems,
to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it accuracy,
was recommended andthat theit in-plant
was recommended
training in notofpossible that thescenario.
in-plant training in not
Transient dominant poles, Effect extrainzeropresent& pole Iton discrete time 2nd order
possible
was in present
recommended that eitherscenario.
work from home It was recommended
internship, that either work from home
system; Digital compensator design usingProject work, review
frequency seminar
response on latestDigital
plot; compensator design
internship,
using root Project
problems, certificate coursework,
locus from reputed
plot. Designreview seminar
organizations
of discrete will be on latest
considered
observer problems,
System. certificate
as Internship.
for LTI Design of setcourse
point tracker.
4. It was
from also recommended
reputed organizationsthat 20% ofwill the courses in each semesterasmay
be considered be completed through
Internship.
4. It was MOOC/also Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
29 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 - - 3
UNIT-I
Selection of Electrical DEPTComponents:
. OF ELECTRICAL SizingEof NGGa transformer,
. main dimensions, kVA output
for single- CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH as well dc) cables sizing.
and three-phase, sizing and selection of motors (ac
SENSORS AND TRANSDUCERS: Temperature, pressure, displacement, velocity,
acceleration, strain Proceedings
and torque /type. Minutes of the Meeting
Medicalof Board of Studies
equipment’s: X-ray in machine
Electrical Engg.graphic
- Radio Held on and29.04.2020
fluoroscopic techniques – Computer
- - -
tomography – MRI – Ultrasonography – Endoscopy – Thermography – Different types of
DEPT. OF ELECTRICAL ENGG.
biotelemetry systems and patient monitoring – Electrical safety. Biological effects of X-rays
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
and precautions.
29.04.2020. The following were present
Proceedings / Minutes of the Meeting UNIT-II
1. Dr. Ajay ELECTRIC of Board
Kumar Bansal, of Studies
HEATING in
HOD,Electrical
& EE- Engg.
WELDING: Held
Chairperson onPrinciple
29.04.2020 and application of resistance, induction
and dielectric heating., - -
Resistance - welding, arc welding, welding generator and welding
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. transformer,
Ashwani
The online meeting of properties
Kumar, of of
the BoardSubject arcing
Studies electrode.
Expert-
in Electrical Member
Engg. was held on 29.04.2020. The
4. Dr.following
Rajeshwere present
Kumar Dubey, Associate Professor, UNIT-IIICUH- Member
ELECTROLYTIC PROCESS: Principles and applications of electrolysis. Faraday’s law of
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
electrolysis, electroplating, charging and discharging. Different types of battery, Capacity and
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
efficiency
3. Prof. AshwaniKumar,
of battery,Expert-
Kumar, Subject
defects in battery, maintenance of battery.
7. Dr. Manish AssistantMember Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- MemberUNIT-IV
8. Dr. Sumit, Assistant Professor, Systems CUH-Special Invitee
5. Dr.ELECTRIC TRACTION:
Munish Manas, Assistant Professor, CUH- Member of electric traction, traction motors, traction motor
9. Dr. Murlidhar,
6. Dr.control,
Kalpana Chauhan, Assistant
multi-unit Professor,
control,
Assistant Professor, braking CUH-Special
CUH- Special of Invitee Inviteethyristor control of electric traction.,
electric motors,
7. Dr.Types ofit services,
Manish Kumar, speed CUH-
Assistant Professor, timeSpecial
and Invitee
speedbydistance curves, averageasand schedule speed,
After deliberations, was resolved/ recommended the Board of Studies follows:
8. Dr.Estimation
Sumit, AssistantofProfessor, CUH- Special Invitee
power and energy requirements: specific energy consumption. Mechanics of
1. The9. Dr.train
Murlidhar,
Scheme movementAssistant Professor,
of Studies
coefficientCUH- Special
& Examinations
of Invitee Adhesive
adhesion, and theweight, Syllabi of B.Tech.
effective weight.(Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19Suggested
onwards( Readings:
to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS 1. Gupta,the
apprise J. B.start
Utilizationof Ph.D. of Electric Power and Electric Traction. S. K. Kataria &
6th semesters) were discussed and approved for theprogram
Batch 2018-19inonwardsDepartment
( to be of Electrical
Engineering.
implemented from Sons,
The
session 2009.
Scheme of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical
2. The BoS apprise 2.
Engg.)- Pratab ofH.
the startwere Art
Ph.D. and Science
discussed
program andof approved
in Department Utilization of Electrical
for the The
of Electrical Engineering. Batch Energy.
Scheme2020-21 Dhanpat Rai & Sons,
onwards
(Annexure-2). Delhi, 2014
of Studies & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for3. Pratab
the Batch H.
2020-21 Electric Traction.
onwards (Annexure-2). Vijay publisher, 2017.
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 4. Sivanagaraju, S., M. Balasubba Reddy, and D. students
pandemic, the internship policy for III year and final year Srilatha. was Generation and utilization
students was
discussed and it wasdiscussed and it was recommended that the scenario. It training in not
in-plant
of recommended
electrical that the in-plant
energy. trainingEducation
Pearson in not possibleIndia,
in present
2010.
possible in present
was recommended scenario.
that either work from It was
home recommended
internship, Project work, reviewthat either
seminar work from home
on latestOrient
5. Taylor, Eric Openshaw. Utilisation of Electric Energy. Blackswan, 1971.
internship, Project
problems, certificate
6. coursework,
Wadhwa, C. review
from reputed seminar
organizations
L. Electrical will be on
Power latest
considered
Systems. problems,
as Internship. certificate course
New Age International, 2006.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
4. It was MOOC/also Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
33 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 - - 3
Suggested Readings:
1. Bell, David A. Electronic Instrumentation and Measurements. Englewood Cliffs, NJ:
Regents/Prentice Hall, 2011.
2. Helfrick, Albert D., and William David Cooper. Modern electronic instrumentation and
measurement techniques. NJ.: Prentice Hall, 1990.
3. Kirianaki, Nikolay V., et al. Data Acquisition and Signal Processing for Smart Sensors.
Chichester, England, Wiley, 2002.
4. Murty, D. V. S.DTransducers and Instrumentation.
EPT. OF ELECTRICAL ENGG. PHI Learning Pvt. Ltd., 2010.
5. Patranabi, D. Sensors and Tranducers. PHI Learning
CENTRAL UNIVERSITY OF HARYANA, MAHENDERGARH Pvt. Ltd., 2003.
6. Saini, J. S. Textbook of Measurements and Instrumentation (With Laboratory
Proceedings
Experiments). New Age /International,
Minutes of theNewMeeting
Delhi, 2019.
7. ofSawhney.
Board ofA.Studies in Electrical
K. A Course Engg.Instrumentation.
in Electrical Held on 29.04.2020
Dhanpat Rai & Co, 1995.
- - -
DEPT. OF ELECTRICAL ENGG.
The online meeting
CENTRALof the Board
UNIVERSITY of ,Studies
OF HARYANA in Electrical Engg. was held on
MAHENDERGARH
29.04.2020. The following were present
Proceedings / Minutes of the Meeting
of Board of Studies HOD,
1. Dr. Ajay Kumar Bansal, in Electrical
EE-Engg. Held on 29.04.2020
Chairperson
- - -
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. Ashwani
The online meeting of Kumar,
the BoardSubject
of StudiesExpert- Member
in Electrical Engg. was held on 29.04.2020. The
4. following
Dr. Rajeshwere present
Kumar Dubey, Associate Professor, CUH- Member
5. Dr. Munish
1. Dr. Ajay KumarManas, Assistant
Bansal, HOD, Professor, CUH- Member
EE- Chairperson
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
7. 3. Prof.
Dr. AshwaniKumar,
Manish Kumar, Subject Expert- Member
Assistant Professor, CUH- Special Invitee
4. Dr. Rajesh Kumar Dubey, Associate Professor, CUH- Member
8. Dr. Sumit, Assistant Professor, CUH-Special Invitee
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr. Kalpana Chauhan,Assistant Professor,
Assistant Professor, CUH-Special
CUH- Special Invitee Invitee
7. Dr. Manish Kumar, Assistant Professor, CUH- Special Invitee
After deliberations, it was resolved/ recommended by the Board of Studies as follows:
8. Dr. Sumit, Assistant Professor, CUH- Special Invitee
9. Dr.Scheme
1. The Murlidhar, Assistant Professor, CUH-
of Studies Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19 onwards( to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS apprise
6th semesters) the start
were discussed of Ph.D.
and approved for theprogram
Batch 2018-19inonwards
Department
( to be of Electrical
Engineering.
implemented from The Scheme
session of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1).
(Electrical Engg.)-
2. The BoS apprise the startwere
of Ph.D.discussed and approved
program in Department for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of Studies
(Annexure-2). & Examinations and the Syllabi of Ph.D. (Electrical Engg.)- were discussed and
approved for the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to CoVID-19 pandemic, the internship policy for III year and final year students was
students
discussed was discussed
and it was recommendedand it in-plant
that the was recommended
training in not possible that thescenario.
in present in-plantIt training in not
possible in present
was recommended scenario.
that either work from home It was recommended
internship, Project work, reviewthat either
seminar on latestwork from home
internship, Project
problems, certificate coursework, review
from reputed seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
MOOC/also
4. It was Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
37 to the Chair.
The meeting ended with vote of thanks
L T P Credits
3 - - 3
L T P Credits
3 - - 3
L T P Credits
3 - - 3
Unit I
Introduction and Classical DEPT. OF E Optimization
LECTRICAL ENGG Techniques:
. Statement of an Optimization
problem C–ENTRAL design U vector – design constraints
NIVERSITY OF HARYANA, MAHENDERGARH – constraint surface – objective function –
objective function surfaces – classification of Optimization problems. Classical Optimization
Techniques: Single Proceedings
variable Optimization / Minutes of– the Meeting Optimization without constraints –
multivariable
of Board
necessary and of Studiesconditions
sufficient in Electrical forEngg.
minimum Held/ on 29.04.2020
maximum – multivariable Optimization
- - -
with equality constraints. Solution by method of Lagrange multipliers – multivariable
Optimization with Dinequality EPT. OF ELECTRICAL ENGG.
constraint – Kuhn – Tucker conditions.
The online meeting CENTRALof the Board
UNIVERSITY OF HARYANA of ,Studies
MAHENDERGARH in Electrical Engg. was held on
Unit II
29.04.2020. The following were present
Linear Programming: ProceedingsStandard / Minutes of form of a linear programming problem – geometry of linear
the Meeting
1. Dr. Ajay of
programming Board
Kumar Bansal, of Studies
problems in
HOD, Electrical
– definitions Engg.
EE- Chairperson Held on 29.04.2020
and theorems, linear simultaneous equations: Elimination
method, Gauss and Gauss-Jordan - - -method, Jacobi's method, Gauss-Seidal method, simplex
2. Prof. J.S. Saini, Subject Expert- Member
3. Prof. method.
Ashwani
The online meetingTransportation
Kumar,
of the BoardSubject problem
of Studies Expert- finding
in Electrical Memberinitial
Engg. was basic
held onfeasible
29.04.2020.solution
The by north - west corner
4. Dr. rule,
following
Rajesh least
were present cost method and Vogel’s
Kumar Dubey, Associate Professor, CUH- Member approximation method.
Unit III
5. Dr. Munish
1. Dr. Ajay Kumar Manas, Assistant
Bansal, HOD, EE- ChairpersonProfessor, CUH- Member
Unconstrained Nonlinear Programming: One – dimensional minimization methods:
6. Dr. Kalpana
2. Prof. J.S. Saini,Chauhan,
Subject Expert-Assistant
Member Professor, CUH-Special Invitee
Classification,
3. Prof. AshwaniKumar,
Fibonacci
Kumar, Subject
method and Quadratic interpolation method Unconstrained
Expert- Member
7. Dr. Manish Assistant Professor, CUH- Powell’s
Special Invitee
4. Dr.Optimization
Rajesh Kumar Dubey, Techniques: Univariate
Associate Professor, CUH- Membermethod, method and steepest descent method.
8. Dr. Sumit, Assistant Professor, CUH-Special UnitInvitee
IV
5. Dr. Munish Manas, Assistant Professor, CUH- Member
9. Dr. Murlidhar,
6. Dr.Constrained
Kalpana Chauhan, Assistant
Nonlinear
Assistant Professor,
Professor, CUH-Special
Programming:
CUH- Special Invitee
Invitee Characteristics of a constrained problem,
7. Dr.Classification, Basic approach of Penalty Function method, Introduction
Manish Kumar, Assistant Professor, CUH- Special
After deliberations, it was resolved/ recommended by the Board of Studies Invitee
as follows: to convex
8. Dr.Programming
Sumit, Assistant Professor, CUH- Special
Problem, Dynamic Programming Invitee
1. The9. Dr.Scheme
Murlidhar, Assistant Professor, CUH-
of Studies Special Invitee
& Examinations and the Syllabi of B.Tech. (Electrical
th th
Engg.)-
After III ityear
deliberations, (5 and
was resolved/ 6 semesters)
recommended by the Boardwere discussed
of Studies as follows: and approved for the Batch
2018-19Suggested
onwards( Readings:
to be implemented from session 2020-21) (Annexure-1).
1. The Scheme of Studies & Examinations and the Syllabi of B.Tech. (Electrical Engg.)- III year (5th
2. Theand BoS 1. Hadley
apprise G. the
Linear Programming.
start of Ph.D. Narosa, 2002
6th semesters) were discussed and approved for theprogram
Batch 2018-19inonwards Department
( to be of Electrical
Engineering. 2. Mital,
implemented from The K.
session V.
Scheme Optimization Methods in Operations
of Studies & Examinations and the Syllabi of Ph.D.
2020-21) (Annexure-1). Research and Systems Analysis. New
(Electrical
2. The BoS apprise Age
Engg.)- International,
the startwere
of Ph.D.discussed1996.
program in Department and approved for the The
of Electrical Engineering. BatchScheme2020-21 onwards
of
(Annexure-2).3.
Studies & Rao, Singiresu
Examinations and S.
the Engineering
Syllabi of Ph.D. Optimization:
(Electrical Engg.)- Theory
were and
discussed Practice.
and John Wiley & Sons,
approved for2019.
the Batch 2020-21 onwards (Annexure-2).
3. Due to CoVID-19 pandemic, the internship policy for III year and final year
3. Due to4.CoVID-19Sharma, S. D.,
pandemic, the and Himanshu
internship policy for Sharma.
III year andOperations Research:
final year students was Theory, Methods and
students was discussed
discussed andApplications”,
it was recommendedKedar and it
that theNath was recommended
in-plantRamtrainingNath,
in not possible that the in-plant training in not
2010. in present scenario. It
possible in present
was recommended scenario. It was recommended that either
on latestwork from home
5. Taha,thatHamdy either workA. from home
Operations internship, Project work, An
Research: review seminar
Introduction. Pearson Education India,
internship, Project
problems, certificate
2013. coursework,
from reputedreview seminar
organizations will be on latest
considered problems, certificate course
as Internship.
4. It was
from also recommended
reputed that 20% ofwill
organizations the courses in each semesterasmay
be considered be completed through
Internship.
4. It was MOOC/also Swayam/ NPTEL courses. that 20% of the courses in each semester may be
recommended
completed through MOOC/ Swayam/ NPTEL courses.
The meeting ended with vote of thanks to the Chair.
40 to the Chair.
The meeting ended with vote of thanks