Professional Documents
Culture Documents
52
Grease
Product Description
The Mobilgrease Moly 50, 50 Arctic, 51 and 52 are high performance 5% Moly molybdenum
disulfide greases specifically designed for the lubrication of off-highway equipment. They are
lithium complex soap greases having excellent extreme pressure and anti-wear properties. These
greases have unusually good staying power under extreme operating conditions and have
especially good water washout, spray-off and extended service capabilities. These heavy-duty
service greases exhibit excellent structural and chemical stability. They will not corrode steel or
copper bearing alloys and are compatible with all conventional sealing materials.
Mobilgrease Moly 50, 51 and 52 were developed especially for their superior performance in
bucket pins, pivot pins, heavily loaded chassis components. Mobilgrease Moly 50 and 50 Arctic
are is especially suited for heavy equipment central lubrication systems requiring an NLGI 0
Grade grease. Mobilgrease Moly 50 and Moly 50 Arctic are is recommended for central
lubrication systems found on Caterpillar and other manufacturers’ off-highway equipment.
Mobilgrease Moly 50 Arctic exhibits good dispensibility down to - 30 C (-22 F). Mobilgrease
Moly 51 is an NLGI No. 1 Grade with very good low temperature pumpability developed for use
in colder temperatures. Mobilgrease Moly 52 is an NLGI No. 2 grease for use as a general-
purpose chassis lube.
Applications
Mobilgrease Moly 50, Moly 50 Arctic, 51 and 52 greases are recommended for severe off-
highway applications in terms of operational severity and water spray. Specific applications
include:
Typical Properties
Mobilgrease
Mobilgrease Mobilgrease Mobilgrease
Moly 50
Moly 50 Moly 51 Moly 52
Arctic
NLGI Grade 0 0 1 2
Thickener Type Li-Complex Li-Complex Li-Complex Li-Complex
Color, Visual Gray-Black Gray-Black Gray-Black Gray-Black
Penetration, Worked, 25º C, ASTM D
370 370 325 280
217, mm/10
Dropping Point, ºC, ASTM D 2265 232 230 246 284
Viscosity of Oil, ASTM D 445
cSt @ 40º C 320 100 320 320
Penetration Consistency Change, Roll
- -5 - -1
Stability, ASTM D 1831, mm/10
Timken OK Load, ASTM D 2509, lb 50 40 50 50
4-Ball Wear Test, ASTM D 2266,
0.4 0.4 0.4 0.4
Scar, mm
Mobilgrease
Mobilgrease Mobilgrease Mobilgrease
Moly 50
Moly 50 Moly 51 Moly 52
Arctic
Corrosion Prevention, ASTM D 1743,
Pass Pass Pass Pass
Rating
Copper Strip Corrosion, ASTM D
1A 1A 1A 1A
4048
4-Ball Weld Load, ASTM D 2596, Kg 400 400 400 400
The Mobil logotype, the Pegasus design and Mobilgrease are trademarks of ExxonMobil
Corporation, or one of its subsidiaries.
Typical Properties are typical of those obtained with normal production tolerance and do not
constitute a specification. Variations that do not affect product performance are to be expected
during normal manufacture and at different blending locations. The information contained herein
is subject to change without notice. All products may not be available locally. For more
information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include
Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the
corporate separateness of local entities. Responsibility for local action and accountability
remains with the local ExxonMobil-affiliate entities.