Professional Documents
Culture Documents
B-TECH
(SEM IV) THEORY EXAMINATION 2022-23
SIGNAL SYSTEM
Time: 3 Hours Total Marks: 100
Note: Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
2
13
(h) Draw ROC of two sided sequence in z transform
_2
2.
(i) What is meant by anti-aliasing filter
P2
(j) Find sampling frequency of signal: 2 Cos (2π x 103t) Cos (4π x 103t)
24
3E
5.
.5
SECTION B
P2
|1
(a) Check whether the given system is Static, Linear, Causal and Time invariant
system or not = + −4
2
.For a
34
SECTION C
|1
| |
(b) Find the Fourier transform of the signal = ."
2
/ =
/ − 5/ + 6
13
_2
(b) A causal LTI system is described by the difference equation
2.
" = "−1 + "−2 + " +2 "−1 .
P2
24
Find the system function and frequency response of the system. Plot the poles and zeroes
3E
5.
and indicate ROC.Also determine the stability and impulse response of the system
.5
P2
|1
(a) Solve y[k+2]+ 5y[k+1]+ 6y[k] = 3f [k+1] + 5f[k]
If the initial conditions are y[-1] =11/6, y[-2] = 37/36 and the input f [k] = 2-k V[k] and
2
indicate zero input and zero state component in the out put y[k].
:5
34
(b) Determine the Nyquist sampling rate and Nyquist sampling interval for
i) = 6"7 1009 + 3 6"7 609
:
13
3
02
-2
08
9-
|1
BTECH
(SEM IV) THEORY EXAMINATION 2021-22
SIGNAL SYSTEM
SECTION A
2
13
(i) Compare CTFT and DTFT. 3
_2
2.
P2
24
2E
5.
SECTION B
.5
P2
Qno Questions CO
|1
signal.
:3
(c) Determine the even and odd components of the following signals 1
13
SECTION C
3. Attempt any one part of the following: 10*1 = 10
Qno Questions CO
(a) Find the inverse Laplace of the following 3
𝟐
𝑋 𝑆 if the region of convergence is
𝑺 𝟒 𝒔 𝟏
a) -4 < Re{s} < 1
BTECH
(SEM IV) THEORY EXAMINATION 2021-22
SIGNAL SYSTEM
b) Re{s} > 1
(b) Using Laplace transform obtain the impulse response of the given 3
second-order system
+3 + 2y(t) = x(t).
𝟎.𝟐𝒛
H(z) = ROC : |z|>0.4
𝒛 𝟎.𝟒 𝒛 𝟎.𝟐
2
13
Qno Questions CO
_2
2.
P2
24
(b) Analyze the Discrete Time Fourier Transform of the following 3
x(n) = 0.5 𝑢 𝑛 2 𝑢 𝑛 1
2E
5.
.5
P2
17
Q
Qno Questions CO
4
-2t
(a) Implement the Convolution integral on the signals x(t) = e u(t) and 2
4
h(t) = u(t).
1:
(b) Implement the Convolution sum on the signals x(n) = an u(n) and h(n) 2
:3
= u(n).
13
2
Qno Questions CO
-2
(a) State and prove the Sampling theorem and discuss the effect of under- 5
08
sampling.
6-
B.TECH
(SEM III) THEORY EXAMINATION 2020-21
SIGNALS AND SYSTEMS
Time: 3 Hours Total Marks: 70
Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
SECTION B
SECTION C
3. Attempt any one part of the following: 7x1=7
(a) Plot 𝑥 𝑡 𝑟 𝑡 2𝑟 𝑡 1 𝑟 𝑡 2 . Find the even and odd parts of this
signal.
(b) (i) Determine the power of the signal 𝑥 𝑛 Cos 𝑛.
∑ Ω
(ii) Show that the power of the signal 𝑥 𝑡 𝑐 𝑒 is
1|Page
Printed Page: 2 of 2
Subject Code: REC303
0Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0
𝑃 ∑ |𝑐 |
2|Page
Printed Page 1 of 2 Sub Code:REC303
Paper Id: 130303 Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0
B. TECH
(SEM-III) THEORY EXAMINATION 2019-20
SIGNALS AND SYSTEMS
Time: 3 Hours Total Marks: 70
Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
SECTION B
SECTION C
3. Attempt any one of the following: 7x1=7
a) Find the Fourier transform of the signal x(t) = 𝑒 u(t) and plot its magnitude and phase
spectrum..
b) Find the DTFT for the following signal x(n) = (0.5)n u(n) + 2-n u(-n -1) .
a) Sketch and check whether the given signal is periodic. If yes, compute its average power.
x(t) = ∑ e ( )
u(2t – n).
b) Find energy and power signal
(i) x(t) = cos(t)
(ii) x(t) = A 𝑒 ∝ u(t)
1|Page
http://www.aktuonline.com
Printed Page 2 of 2 Sub Code:REC303
Paper Id: 130303 Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0
a) State and prove Initial and Final value theorem for Z transform.
𝐒 𝟐
b) If the Laplace transform of x(t) = 𝐒𝟐 𝟒𝐒 𝟓 , Determine Laplace transform of
y(t) = x(2t – I) u(2t – I).
2|Page
http://www.aktuonline.com
Printed Pages : 3 Subject Code : EEC404
BTECH
(SEM-IV ) THEORY EXAMINATION 2018-19
SIGNALS AND SYSTEMS
Time : 3 Hours Max. Marks : 100
Note : Be precise in your answer. In case of numerical problem assume data wherever not
provided
SECTION – A
(e) Determine whether or not signal x (t) = cos sin is periodic .if periodic find
SECTION B
2. Attempt any three parts of the following questions: 3×10=30
(a) When the input to an LTI system is 𝑥 (𝑛) = ( ) 𝑢(𝑛) + 2 𝑢(−𝑛 + 1) and the
http://www.aktuonline.com
Printed Pages : 3 Subject Code : EEC404
( )
(d) A signal x (t) has the Laplace Transform X(s) = . Find the Laplace
( )
Transform of the following signal y (t) = x (2t - 1 ) u (2t -1).
(e) Determine the Z-Transform of following sequences with ROC
x(n) = 0 otherwise
(ii) x(n) = 𝑛 u(n) + nu(n)
SECTION C
h(t)
-1 0 2 t
Figure 1
http://www.aktuonline.com
Printed Pages : 3 Subject Code : EEC404
(b) For the discrete time system 𝑦(𝑛) = 𝑥(−𝑛 + 2) and𝑦(𝑛) = 𝑥(𝑛) + 𝑛. 𝑥(𝑛 + 1),
check whether the system is static or dynamic, linear or non-linear, shift invariant or
shift varying, causal or non-causal.
5. Attempt any one parts of the following : 1×10=10
(a) Determine the total response of the differential equation
𝑑 𝑦(𝑡) 𝑑𝑦(𝑡)
+3 + 2𝑦(𝑡) = 𝑥(𝑡)
𝑑𝑡 𝑑𝑡
(b) Given the relationship 𝑦(𝑡) = 𝑥(𝑡) ∗ ℎ(𝑡) and 𝑔(𝑡) = 𝑥(3𝑡) ∗ ℎ(3𝑡), and given that
X(t) has Fourier transform X(jω) and h(t) has Fourier transform H(jω). Use Fourier
transform properties to show that g(t) has the form 𝑔(𝑡) = 𝐴𝑦(𝐵𝑡). Determine the
value of A & B.
7. Attempt any one parts of the following : 1×10=10
(a) Compute the DTFT of 𝑥(𝑛) = (𝑏 sin 𝜔 𝑛) 𝑢(𝑛); 𝑏 1.
(b) (i) Determine output response of system h(n) = (1,0,1,0) for input x(n) = (1,2,3,4).
(ii) Give and explain the relation between S-plane and Z-plane.
http://www.aktuonline.com
www.aktuonline.com
B TECH
(SEM IV) THEORY EXAMINATION 2017-18
Signals & Systems
Time: 3 Hours Total Marks: 100
Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
SECTION B
SECTION C
3. Attempt any one part of the following: 10 x 1 = 10
a) Find whether the signals are energy signal, power signal or not?
(i ) x(t ) e 3t u (t )
n
(ii ) y (n) cos( )
4
b) Sketch the following signal-
(i) -2u(t-1)
(ii) 3r(t-1)
(iii) r(-t+2)
om
(v) r(t)-2u(t-1)-r(t-2)
in
nl
o
tu
.ak
w
w
w
://
tp
ht
www.aktuonline.com
( ii ) y ( n ) x ( n ) u ( n )
7. Attempt any one part of the following: 10 x 1 = 10
a) By using Laplace transform, solve the following differential equation-
d 2 y (t ) dy (t ) dx(t ) dy (0 )
3 2 y (t ) ify (0 ) 2; 1
dt 2 dt dt dt
andx(t ) e t u (t )
b) Find the initial and final values for the following transform
s5
(i )
s 2 3s 2
s 2 5s 7
( ii ) 2
s 3s 2
om
e.c
in
nl
o
tu
.ak
w
w
w
://
tp
ht
Printed Pages : 1 Roll No. EEC404
B. TECH.
THEORY EXAMINATION (SEM–IV) 2016-17
SIGNALS AND SYSTEMS
Time : 3 Hours Max. Marks : 100
Note : Be precise in your answer. In case of numerical problem assume data wherever not provided.
SECTION-A
1 Explain the following: (10×2=20)
a) What are the different types of Signals?
b) Define inverse FT.
c) Explain damping ratio.
d) What is first order system? Explain.
e) Explain discrete-time system.
f) Give the significance of rectangular pulse.
g) Define continuous time system.
h) What is unit ramp?
i) Define transformation.
j) Explain one-sided Z-transform.
SECTION-B
2 Attempt any five of the following: (10×5=50)
a) Discuss the unit impulse and unit step signals with suitable example.
b) Write a note on s-plane to z-plane mapping with appropriate example.
c) Explain the causality and stability with reference to a system with example.
d) Sketch the discrete time signal x(n) = 2–n for –3<n<3 and obtain Y(n) = x(n) + u(– n + 2).
e) Illustrate the relation between Laplace Transform and Fourier Transform with suitable
example.
f) State Parseval’s theorem. Illustrate it with prper example.
g) Solve the differential equation using z-Transform method x(n – 2) –9x (n – 1) + 18 x(n) =
0. Initial conditions are x(–1) = 1, x(–2) =9.
h) Describe the convolution integral with the help of an example.
SECTION-C
Attempt any two of the following: (15×2=30)
3 What do you understand by energy spectral density of the signal? Explain. Find the auto-
correlation function and the energy spectral density of the signal x(t) = e–t u(t).
4 What do understand by the one-sided Laplace Transform of signal? Explain. Also find the
Laplace Transform of the signal x(t) = e–3t u(t) + e–2t u(t) and find ROC.