Professional Documents
Culture Documents
Orders to record
Orders to record...................................................................................................................
1. Product overview.............................................................................................................
5. List of spare parts and special tools required for cabinet maintenance
...................................................................................................................................................
-2-
YQ211890
1. Product overview
The cabinet is made of metal or non-metal materials and is directly under the influence of climate
environment. The operator is not allowed to enter the cabinet.Communication equipment, transmission
equipment, power supply equipment, monitoring equipment, batteries and other supporting equipment
can be installed inside the device, which can provide reliable mechanical and environmental protection
for the normal operation of internal devices.
-3-
YQ211890
The
Cabi
air
Elect
The
Figure 1-2
The maximum dimensions inside the cabinet are 1800mm x 1700mm x 800mm
-4-
YQ211890
Equipment bay: The equipment bay can support a maximum of 40U equipment installation
space.
Ac 220-240V to 50/60Hz
Figure 2-1
-5-
YQ211890
3. Use and maintain the cabinet
When opening the cabinet door, the limiting device automatically realizes the limiting
function. When closing the door, please gently lift the limiting device to cancel the
limiting function.
-6-
YQ211890
The outdoor integrated cabinet uses a 1500W AC compressor for heat dissipation. For
details, see the manual delivered with the air conditioner.
(1)A cabinet is equipped with a ground bar. The ground bar is an anticorrosive coated
copper bar with a cross-sectional area of 50mm2. Ten appropriate screw holes and screws
are reserved.See Figure 3-2
Figure 3-2
Light maintenance: Open the door and check whether the light is on normally.Check
whether the wiring is damaged and the lamp plug is off.See Figure 3-3
-7-
YQ211890
LED
Figure 3-3
After packaging, the product can be transported by car, train, ship, plane, etc.Avoid
collisions, falls, direct exposure to rain and snow, and sun exposure during
transportation.
Products should be stored in well-ventilated, dry warehouse, there should be no
corrosive gases around, storage temperature of -40℃ ~ +70℃.
5. List of spare parts and special tools required for cabinet maintenance
The serial
Spare part/tool name The number of
number
4 Vice pliers 1
5 Wire stripper 1
-8-
YQ211890
7 Multipurpose meter 1
-9-