European Aviation Safety Agency
SUPPLEMENTAL TYPE CERTIFICATE
EASA.IM.A.S.01207
‘This certificate, established in accordance with h Regulations (EC) No 1592/2002 and (EC) No
1702/2003 and issued to:
McFarlane Aviation Inc
696 East 1700 Road
Baldwin City
Kansas 66006
USA
certifies that the change in the type design for the product listed below with the limitations and
conditions specified meets the applicable type certification basis and environmental protection,
requirements when operated within the conditions and limitations specified below:
Original Product Type Certificate number:
Manufacturer: Cessna Aircraft Company
Model: Cessna & Reims Cessna 150, 152, 170,
172, 175, 180, 182, 185, 188, 206, 207, 210 *
* For full aircraft applicability within these basic model designations see McFarlane Aviaiton
Prodeuis Drawing Number 1058 Rev A dated May 1 2002 or later FAA approved revision
Description of Design Change:
Installation of McFarlane Aviation FlapRoller Assembly Service Kit MCSK100 under FAA
STC SA01074WIEuropean Aviation Safety Agency
Associated Technical Documentation:
McFarlane Aviation Drawings 1057 Rev Original & 1058 Rev Original FAA Approved April
22, 2002 or later FAA Approved Revision
Limitations and Conditions: a“
1. Cessna Service Bulletin SEB95-3 must be complied with before this STC can be installed
2. This STC is approved only for the product configuration as defined in the approved design
data referred to in the paragraph "Description". Compatibility with other aircraft/engine
configurations shall be determined by the installer.
This certificate shall remain valid unless otherwise surrendered or revoked.
For the European Aviation Safety Agency,
Date of Issue: 30 May 2005
(in Leroy
Head of Products Department
STC- EASA.IM.A.S.01207 - McFarlane Aviation Ine