Professional Documents
Culture Documents
Automation
/ 2 Catalog
2018
20192020-2021
2018
Power and Control Products
Pushbuttons and Pilot Lights
US300.Power.Controls.2020-2021:50104422
Motors | Automation | Energy| Transmission & Distribution | Coatings
General Information
Table of Contents
Index – Industrial Controls
Pushbuttons
and Pilot
Lights
Data is subject to change without notice. WEG Automation - Products and Solutions | 5
Information
General Pushbuttons and Pilot Lights
Standard Features:
• Fast and Easy Assembly of Pushbuttons and Contact Blocks
Protectors
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
A B
Information
General
CSW Series (22mm)
Flush 1
Protection
Color Catalog Number List Price Multiplier
Circuit
White CSW-BF0 WH $5
Red CSW-BF1 WH $5
Green CSW-BF2 WH $5
Z5
Disconnect
Switches
Yellow CSW-BF3 WH $5
Blue CSW-BF4 WH $5
0.021 kg Black CSW-BF5 WH $5
Protectors
Motor
Guarded
Image Color Catalog Number List Price Multiplier
White CSW-BGA0 WH $5.50
Contaqctors
Red CSW-BGA1 WH $5.50
Contactors
Green CSW-BGA2 WH $5.50
Z5
Yellow CSW-BGA3 WH $5.50
Blue CSW-BGA4 WH $5.50
0.022 kg Black CSW-BGA5 WH $5.50
Overloads
Overloads
Extended 1
Image Color Catalog Number List Price Multiplier
Enclosed
CSW-BS0 WH $6.50
Enclosed
White
Starters
Starters
Red CSW-BS1 WH $6.50
Green CSW-BS2 WH $6.50
Z5
Yellow CSW-BS3 WH $6.50
Blue CSW-BS4 WH $6.50
Relays
0.021 kg Black CSW-BS5 WH $6.50
Pushbuttons
and Pilot
Image Color Catalog Number List Price Multiplier
Lights
Red CSW-BC1 WH $8.50
Z5
Terminal
$8.50
Blocks
Green CSW-BC2 WH
0.024 kg
Correction
Factor
Power
Head
Notes: 1) Does not allow the use of contact blocks in the central position of the mounting flanges;
B
2) Check the maximum of recommended contact blocks for each head on pages 330.
Data is subject to change without notice. WEG Automation - Products and Solutions | 309
Information
General Pushbuttons and Pilot Lights
Pushbuttons with Latch - Ø22 mm - IP66
Emergency Pushbuttons with Latch (EN 418 and IEC 60947-5-5)
Protection
Red
Pull to release - CSW-BESP WH $15
0.049 kg
Protectors
Red
0.049 kg
Z5
Contactors
0.114 kg
GBES-02 $10
CSW-BESY WH
Enclosed
0.027 kg
Pushbuttons
and Pilot
Lights
0.091 kg
Terminal
Blocks
How to order3)
Power
Contact block
Head
+ Flange
+ Contact block Flange
Appendix Appendix
A
Notes: Head
1) Keys with different codes are available upon request.
2) Does not allow the use of contact blocks in the central position of the mounting flanges
B
3) Check the maximum of recommended contact blocks for each head on page 330.
Information
General
Flush1)
Illuminated Pushbuttons - Ø22 mm - IP66
Image Color Catalog Number List Price Multiplier
White CSW-BFI0 WH $8.50
Protection
Red CSW-BFI1 WH $8.50
Circuit
Green CSW-BFI2 WH $8.50
Z5
Yellow CSW-BFI3 WH $8.50
0.021 kg Blue CSW-BFI4 WH $8.50
Disconnect
Switches
Orange CSW-BFI4 WH 3 $8.50
Extended 1)
Protectors
Red CSW-BSI1 WH $8.50
Motor
Green CSW-BSI2 WH $8.50
Z5
Yellow CSW-BSI3 WH $8.50
0.021 kg
Blue CSW-BSI4 WH $8.50
Contactors
Orange CSW-BSI6 WH 3 $8.50
Overloads
Red CSW-BCI1 WH $10
Enclosed
Starters
Blue CSW-BCI4 WH $10
Head
Relays
+ Flange Flange
+ Contact block
+ Illumination block
Head
Pushbuttons
and Pilot
Lights
Pilot Lights1)
Image Color Catalog Number List Price Multiplier
White CSW-SD0 WH $7.30
Terminal
Red CSW-SD1 WH $7.30
Blocks
Green CSW-SD2 WH $7.30
Z5
Yellow CSW-SD3 WH $7.30
0.016 kg Blue CSW-SD4 WH $7.30
Correction
Head
A
+ Flange Flange
+ Illumination block
B
Data is subject to change without notice. WEG Automation - Products and Solutions | 311
Information
General Pushbuttons and Pilot Lights
2 Positions Selectors - Ø22 mm - IP66
Knob
Position Diagram Selector angle Color1) Part Number List Price Multiplier
Protection
0
Fixed 1 45º Black CSW-CK2F45 WH $13
Circuit
0 I
0 I
0 I
0
0 II With
0 I 1 45º Black CSW-CK2R45 WH $15
0 I return
0 0 I Z5
I
0 II
0 Fixed 1 90º Black CSW-CK2F90 WH $13
0 II
Disconnect
0
Switches
0 0 I
0I
I 0 II
I With
0.025 kg 0 II 1 90º Black CSW-CK2R90 WH $15
I 0 II return
I 0 II
I 0 II
I 0 II
I 0 0 II
II 0 II II
Protectors
I 0 II
Lever II 00 II
I 0 II
Motor
II
I 0 II
I 0 0 Position
II Diagram Selector angle Color1) Part Number List Price Multiplier
I 0 II
I 0 II
I 0 0 III Fixed 1 45º Black CSW-CA2F45 WH $14 Z5
II 0 III II
I 00 III
0
I 00 III With
Contactors
I 0 II
I 0 II
0
I 0 II
II 0 II II
I 0 II
With Key 2)3) II 00 II
I 0 II II
I 0 II
I 0 0 Position
II Diagram Selector angle Color1) Part Number List Price Multiplier
I 0 II
Enclosed
Starters
I 0 II
I 0 0 III Fixed 1 45º Black CSW-CY2F45 WH $41 Z5
II 0 II III
I 0 III
0
I 0 III With
I 0 IIII 1 45º Black CSW-CY2R45 WH $43 Z5
0I 0 III return
I0 0 III
I0 0 IIII
I0 III Fixed 1 90º Black CSW-CY2F90 WH $41 Z5
0 0 II
0
Supplies
I0 0 III
Power
Relays
0.087 kg
0I
I 0 II
I With
0 II 1 90º Black CSW-CY2R90 WH $43 Z5
I 0 II return
I 0 II
I 0 II
I 0 II
0
I 0 II
II 0 II II
Pushbuttons
I 0 II
Legend
and Pilot
Diagram II 001 II
Lights
I 0 II
Blocks
I 0 II
0 I 0 I 0 II
I 0 II -
0 I II
I II I 0
I II
0
I II
How to order4) Contact block
Correction
0
Factor
Power
I II
Head
+ IFlange
0
II Flange
+ Contact
0
block
I II
Appendix Appendix
0 Head
I II
A
0
I II
0
Notes: 1)IISelector switches in other colors are available under request;
B
I
2) Keys with different codes are available under request;
3) K
ey is released in any position. For key release in specific positions, please replace CY by: CYD (only at right),
CYE (only at left) and CYC (only at center);
4) Check the maximum of recommended contact blocks for each head on page 302.
Information
General
0
0 I
0
I A3 Positions Selectors - Ø22 mm - IP66 CW
I
0
Knob 0
I
0 I
0 II
0 I Selector
0 I Position Diagram
angle
Color1) Catalog Number List Price Multiplier
Protection
0 0 II
0 I
Circuit
0 0 I
0
II 0 II Fixed 1 45º Black CSW-CK3F45 WH $13
0 II
I
I 0 II
0 0 I
II II
0 II
I 0 II
0 0 I With return 1 45º Black CSW-CK3R45 WH $15
II II
Disconnect
0 II
Switches
I 00 II Z5
I 0 II
II II With return
0.025 kg 0 II 1 45º Black CSW-CK3RD45 WH $15
II 0 II
0
II from the right
0
II II
0 II
II 0 II With return
0
0 II 1 45º Black CSW-CK3RE45 WH $15
II
0
II
II from the left
I 0
Protectors
II
I 0
0 II
II II
Motor
0 II
I 0 0 II
I 0 III
II 0 II
0 II
0 I
I 0 III
Lever I 0 III
0
0
0 II
0 I II Selector
Contactors
0 I Position Diagram Color1) Catalog Number List Price Multiplier
0
0 0 II angle
I 0 III
0
0 0 I
I 0 II Fixed 1 45º Black CSW-CA3F45 WH $14
I 0 III
I 0 II
0 I 0 III
I 0 II
I 0 II With return 1 45º Black CSW-CA3R45 WH $16
Overloads
0I I
0 II
I 0 II Z5
I 0 II
II II
0 II With return
0 II
I 0
I 0 II 1 45º Black CSW-CA3RD45 WH $16
0.025 kg II IIII from the right
0
I 00 II
I 0 II With return
II II
0 II 1 45º Black CSW-CA3RE45 WH $16
0
I 0 II
from the left
Enclosed
I
Starters
0 I 0 II
I I 0 II
0
I I 0 II
0 I 0 II
I 0 II
0 0 II I 0 II
0
I
I
Diagram 1 I 0 II
0 I I II
0 0 I Mounting position
0 0 II 0
in the
I flange
II
Relays
0I I
II
00 Handle
I 0 III 0
position - 2 I 3 II 1 -
I II
0 0 I
I 0 II 4 2 5 1 3
II II
0 0 I
I 0 II I
Pushbuttons
I 0 II
and Pilot
I 0 II
Lights
I 0 II
0
0
II 0 II II -
I 0 II
0
II II
0 II II
I 0 II
I 0 II
I 0 II
I 0 II
Terminal
Blocks
I 0 II
ILegend
0 II Contact block
I 0 II
c
I 0 II
Contacts in the rest position.
Ig Contacts
II operated.
0
I II Flange
How to order
Correction
0
I II
Factor
Power
Head Head
+ Flange
+ Contact block
Appendix Appendix
2) Check the maximum of recommended contact blocks for each head on page 302.
B
Data is subject to change without notice. WEG Automation - Products and Solutions | 313
Information
General Pushbuttons and Pilot Lights
A3 Positions Selectors
0
0 I
I - Ø22 mm - IP66 CW
0
0 I
0
II
0
With Key 2)3) 0 II
0 I
Protection
0 0 I
0 II Position Diagram Selector angle Color1) Catalog Number List Price Multiplier
Circuit
0
0 0 I
0
II II
III Fiixed 1 45º Black CSW-CY3F45 WH $41
0
0I 0 II
0 I
II II
II
0
0I 0 III With return 1 45º Black CSW-CY3R45 WH $43
0
Disconnect
II II
0 II
Switches
II
0
II Z5
0 II
0 With return from
II 0 II
II 1 45º Black CSW-CY3RD45 WH $43
I 0 II the right
0.087 kg I 0 II
0
II 0 II
II
0 With return from
II
0
II
II 1 45º Black CSW-CY3RE45 WH $43
II
0
II
the left
0 II
Protectors
0
II II
0 II
0
Motor
0 II II
I 0 II
0
II II
0 II
0
0 II II
II
I 0
I II
0 I
Diagram 1 0
I II
Contactors
0 I
Mounting position
0
0 II
in theI flange
I II Handle
0 position - 2 3 1 -
I II
4 2 5 1 3
0
I II
I
Overloads
0
I II
0 -
0
I II II
0
I II
Legend
0
Enclosed
Starters
I II
c Contacts in the rest position.
g 0Contacts operated.
I II
Relays
Head
3) K
ey is released in any position. For key release in specific positions, please replace CY by: CYD (only at right), CYE (only at left) and CYC (only at
center);
4) Check the maximum of recommended contact blocks for each head on page 302.
Information
General
Illuminated Selectors - Ø22 mm - IP66
2 Positions Illuminated Selectors
Image Position Diagram Selector angle Color Catalog Number List Price Multiplier
0
I White CSW-CKI2F900 WH $8
Protection
Circuit
0 Red CSW-CKI2F901 WH $8
I
0 I
Green CSW-CKI2F902 WH $8
Fixed 1 90º Z5
0 I
Yellow CSW-CKI2F903 WH $8
0.020 kg
0
Blue CSW-CKI2F904 WH $8
Disconnect
I II
Switches
Orange CSW-CKI2F906 WH 1 $8
0
3 Positions Illuminated
I
0Selectors
III
Image 0Position
0 Diagram Selector angle Color Catalog Number List Price Multiplier
I II
I
White CSW-CKI3F450 WH $8
0 0 I
I II
Protectors
0 0 I
Red CSW-CKI3F451 WH $8
Motor
I II
0 Green CSW-CKI3F452 WH $8
I 0 II Fixed 2 45º
I 0 II Yellow CSW-CKI3F453 WH $8
0 I
I 0 II
I 0 II Blue CSW-CKI3F454 WH $8
0 I
Contactors
I 0 II
0I I
II Orange CSW-CKI3F456 WH 1
$8
0
0I II
I White CSW-CKI3R450 WH $8.50
0
0 I
II
0
II
II
Red CSW-CKI3R451 WH $8.50
0
0 I
0 With Green CSW-CKI3R452 WH $8.50
II II
II 2 45º
0 I return
Overloads
0
0
Yellow CSW-CKI3R453 WH $8.50
II II
II
0 I
0
Blue CSW-CKI3R454 WH $8.50
I 0 II
I II Orange CSW-CKI3R456 WH 1 $8.50
0 Z5
I II White CSW-CKI3RD450 WH $8.50
0 CSW-CKI3RD451 WH $8.50
Enclosed
Red
Starters
I II With
0
0 I
0
return Green CSW-CKI3RD452 WH $8.50
II II
0
II from 2 45º
0 I
0 II the Yellow CSW-CKI3RD453 WH $8.50
II II
0 I right Blue CSW-CKI3RD454 WH $8.50
0
0I II
I Orange CSW-CKI3RD456 WH 1 $8.50
Supplies
Power
Relays
0
0
0.020 kg II II
II White CSW-CKI3RE450 WH $8.50
0
0
II II
II With Red CSW-CKI3RE451 WH $8.50
0 return Green CSW-CKI3RE452 WH $8.50
Pushbuttons
I II from 2 45º
and Pilot
the Yellow CSW-CKI3RE453 WH $8.50
Lights
0
I II 0
left I
Blue CSW-CKI3RE454 WH $8.50
0
I II 0
I Orange CSW-CKI3RE456 WH 1
$8.50
0
Diagram 1 I II 0 I Diagram 2 Legend
Mounting0 position 0 I Mounting position Flange c Contacts in the rest position.
Terminal
I II
Blocks
in the flange 0 in the flange g Contacts operated.
0 Handle 0 I II Handle
I
position - 2 I
3 II
1 -
0 position - 2 3 1 - 3P ☼ Mounting position for LED blocks in
0
I
I II illuminated switches.
4 2 5 1 3 4 2 5 1 3 5P
0
0 I I II
I
Correction
0
0
Factor
I
Power
0
☼ I II 0 ☼
0
I II I I
0
II II
0
I II 0
POTENTIOMETER I II
Appendix Appendix
0
I CSW-POT_W
II 0
Resistance
A
I II
0 LIST PRICE
I II 0
$145 I II
I
0
II
CSW-POT __ W 0.5 - 0.5kΩ
B
1 - 1kΩ 10 - 10kΩ
I
0
II 2 - 2kΩ 50 - 50kΩ
0 5 - 5kΩ
I II Note:
I
0
II
1) For better lighting performance use yellow LED Block
Data is subject to change without notice. WEG Automation - Products and Solutions | 315
Information
General Pushbuttons and Pilot Lights
Flush Double Pushbutton - Degree of Protection IP401)2)4) - (refer to 1. How to order)
Color Engraving Reference List Price Multiplier
Green I
CSW-BD WH 11.50
Protection
Red O
Circuit
Z5
Green START
CSW-BD21SS WH 11.50
0.034 kg Red STOP
Extended Red O
Z5
Flush Green START
CSW-BDS21SS WH 14.00
0.034 kg Extended Red STOP
Triple Pushbutton - (refer to 1. How to order)
Frontal Color Engraving Reference List Price Multiplier
Overloads
Flush Green I
Extended REARME
Blue RESET CSW2-BTF241IOR WH 16.00 Z5
0.034 kg Flush Red O
Extended Triple Pushbutton - (refer to 1. How to order)
Enclosed
Starters
Flush Red O
and Pilot
Z5
Lights
Flush Green I
CSW2-BDSI21IO WH 14.00
Extended Red O
Z5
Flush Green START
CSW2-BDSI21SS WH 14.00
Correction
+ Flange
Flange + Contact block
A
+ Contact block
+ Illumination block
Head Head
B
Notes: 1) Does not allow the use of contact blocks in the central position of the mounting flanges
2) To increase the Degree of Protection, use the APBD silicon protective cover
3) Check the maximum of recommended contact blocks for each head on page 302.
4) Use blue flange and contact block components
316 | 1-800-ASK4WEG | www.weg.net Data is subject to change without notice.
Pushbuttons and Pilot Lights
Information
General
Accessories for CSW (22mm)
Flanges 1
Protection
Circuit
3-position mounting flange for blue
contact blocks
Allows the mounting of extras
1 piece AF3F $2.17
contact blocks due to front-back
system
Disconnect
Switches
Z5
5-position mounting flange for blue
0.010 kg2) contact blocks
Allows the mounting of extras 1 piece AF5F $6.06
contact blocks due to front-back
system
Protectors
Motor
Contact Blocks1)
Standard Compatible
Contacts Diagram flange Catalog Number List Price Multiplier
packing
Contactors
_3
AF3F
_1
Overloads
1NC 1 piece BC01F-CSW $5.00
_2
Z5
_3
1NO
0.015 kg2) EARLY 1 piece BCA10F-CSW
Enclosed
Starters
MAKE _4
AF3F $5.55
_1
1NC
LATE 1 piece BCR01F-CSW
BREAK _2
Relays
Self-Monitoring Contact Block for Emergency Pushbuttons1)2)
Standard Compatible
Contacts Diagram Catalog Number List Price Multiplier
Pushbuttons
packing flange
and Pilot
Lights
_1 _2
Terminal
Blocks
0.002 kg2)
Notes:
Correction
1) Not compatible with the PBW control stations line. For control stations accessories, please refer to the page 323 to 327. of this catalog
Factor
Power
Data is subject to change without notice. WEG Automation - Products and Solutions | 317
Information
General Pushbuttons and Pilot Lights
Accessories for CSW (22mm)
Illumination Blocks with Integrated LED1)2)3)
Standard Compatible
Voltage Color Diagram Catalog Number List Price Multiplier
Protection
packing flange
Circuit
0.016 kg
Relays
Standard Compatible
Description Ue Diagram Catalog Number List Price Multiplier
packing flange
Pushbuttons
and Pilot
Lights
Integrated
380-
LED blocks AF3
6
(220-240 V ac)
Correction
Factor
Power
0.016 kg
Appendix Appendix
Notes:
A
1) Not compatible with the PBW control stations line. For control stations accessories, please refer to the page 323 - 327. of this catalog
2) Unitary weight.
3) Not compatible with black flanges
B
Information
General
Accessories for CSW (22mm)
Ba9s Socket Lamp Block1)2)4)
Protection
Standard Compatible Catalog
Description Diagram List Price Multiplier
Circuit
packing flange Number
X1
Disconnect
Switches
- Maximum voltage 380 V (2 W) AF3
1 piece CSW-BIDF $5.27 Z5
- Direct V ac/dc AF5
0.013 kg - Lamp not included
X2
Protectors
Motor
Lamps Ba9s1)2)
Voltage Standard packing Catalog Number List Price Multiplier
6 V ac/dc 25 pieces CSW-LI E48-0.6W $242.50
12 V ac/dc 25 pieces CSW-LI E25-1.8W $242.50
Contactors
24 V ac/dc 25 pieces CSW-LI E26-2W $242.50
48 V ac/dc 25 pieces CSW-LI E27-2W $242.50 Z5
60 V ac/dc 25 pieces CSW-LI E29-1.2W $242.50
130 V ac/dc 25 pieces CSW-LI E30-2W $242.50
0.005 kg3) 220 V ac/dc 25 pieces CSW-LI E31-2W $242.50
Overloads
Illumination Block with Lamp + Resistor + Diode1)2)4)
Standard Compatible
Descripction Diagram Catalog Number List Price Multiplier
packing flange
Enclosed
X1
Starters
- Block voltage: 220 - 240
V ac
Includes 120/130 V AF3F
1 piece CSW-BIRDFD66 $25.34 Z5
incandescent lamp AF5F
- Ba9s socket
Relays
0.016 kg X2
Pushbuttons
and Pilot
Lights
Ba9s lamps extraction tool of illumination blocks 1 piece ACEF $5.60 Z5
0.008 kg
Terminal
Blocks
Push-on/Push-off Block1)2)4)
Standard Compatible Catalog
Descripction List Price Multiplier
packing flange Number Correction
Factor
Power
0.019 kg
- BCA10-F (1NO early-make);
A
- BC02-F (2NC).
B
Notes: 1) Not compatible with the PBW control stations line. For control stations accessories, please refer to the page 323 - 327
2) Not compatible with double pushbuttons CSW2-BD;
3) Unitary weight.
4) Not compatible with black flanges
Data is subject to change without notice. WEG Automation - Products and Solutions | 319
Information
General Pushbuttons and Pilot Lights
Accessories for CSW (22mm)
Plate Holder and Plastic Legend Plate Set1)
Standard
Description Catalog Number List Price Multiplier
Protection
packing
Circuit
no engraved, red and black colored) for double pushbuttons 1 piece APP60 $2.30
0.004 kg2)
CSW-BD. Not compatible with CSW2-BD.
Z5
Plate holder and plastic legend plate set (27 x 18 mm,
no engraved, translucent) for pilot lights, single 5 pieces APP30T $11.50
pushbuttons and selector switches.
Protectors
+
Motor
Reduction Ring1)
Standard
Description Catalog Number List Price Multiplier
packing
Overloads
0.030 kg
Enclosed
Starters
Notes: 1) Not compatible with the PBW control stations line. For control stations accessories, please refer to the page 295 and 296 of this catalog
2) Unitary weight.
Emergency-Stop Plate1)
Standard
Description Catalog Number List Price Multiplier
packing
Relays
Text: English
and Pilot
Lights
0.009 kg2)
Z5
Terminal
Blocks
Information
General
Accessories for CSW (22mm)
APP30 Plate Holder and 27 x 18 mm Engraved Plastic Legend Plate Set1)3)
For use with single pushbuttons,
pilot lights and selector
Protection
switches +STARTMANUAL
Circuit
AUTO
0.015 kg 4)
Disconnect
Switches
APP30-01 CLOSE $4.20
Protectors
APP30-05 JOG $4.20
Motor
APP30-06 JOG FORWARD $4.20
Contactors
APP30-10 ON $4.20
Overloads
APP30-14 RESET $4.20
Enclosed
Starters
APP30-18 STOP $4.20
APP30-19 UP $4.20
Relays
APP30-23 MANUAL AUTO $4.20
Pushbuttons
APP30-26 RUN JOG $4.20
and Pilot
APP30-27 START STOP $4.20
Lights
APP30-28 UP DOWN $4.20
Terminal
Blocks
APP30-33 OPEN OFF AUTO $4.20
APP30-P01 0-10 $6
Appendix Appendix
Type 4x Protection
WEG control stations and emergency stop stations, also known as the PBW line, are available for a wide
range of applications meeting the most demanding requirements of quality, robustness and modular design.
Disconnect
Switches
The PBW line has been developed meeting the requirements of international standards such as IEC 60947-
5-1, IEC 50102, IEC 60529 and UL 508 and can be used with WEG current pushbuttons and signaling units
(CSW series).
Standard Features:
Protectors
Motor
• IP66/Type 4x degree of protection: accurate design combined with a special sealing gasket assures the
degree of protection throughout product life cycle
• Several cable entries: knock-out type entries on the top, base and side, meeting different cable
glands with different threads
Contactors
•E xclusive ID plate holding system: integrated to the construction, allows for standard CSW legend plates
•C aptive screws: ensures safe and easy operations without loosing hardware
•P remium polycarbonate construction: non-flammable and UV ray protected, its oversized thickness offers
high mechanical resistance
Overloads
•T he PWB line is very cost effective, and inventory is always readily available.
Enclosed
Starters
Pushbuttons Relays
and Pilot
Terminal
Blocks
Information
General
Accessories for CSW (22mm)
Type 4X Decentralized Control Stations 1)
Number Color Standard
Protection
Catalog Number Price Multiplier
Circuit
of holes Cover Base packing
Disconnect
Switches
0.114 kg
1
PBW-1 $25
Protectors
Motor
0.114 kg
2 PBW-2 $30
Contactors
0.152 kg
Black 1 piece Z5
Overloads
0.185 kg
4 PBW-4 $41
Enclosed
Starters
0.215 kg
6 PBW-6 $59
Relays
0.276 kg
Pushbuttons
PBW control Weight
and Pilot
Pushbuttons Contact blocks Plate Catalog Number List Price Multiplier
Lights
station (kg)
Red engraved
Emergency stop
Yellow - 1 hole 1NO + 1NC “EMERGENCY PBW1Y-G11 V03 0.212 $48.00 Z5
CSW-BESG
STOP”
Terminal
Blocks
Accessories - Mounting in Control Stations
Contact Block 2)
Correction
Standard
Factor
Power
_4
to mounting Z5
A
in control stations _1
Notes: 1) C ompatible with all single of the CSW line pushbuttons, selector switches and pilot lights. To avoid interferences
and ensure the performance when use a mushroom pushbutton beside another pushbutton, WEG recommend
maintaining an empty hole between the pushbuttons. To close the hole use the ATR accessory;
2) Blocks specific for mounting in base or PBW plastic control stations or DIN rail 35mm;
3) Unitary weight.
Data is subject to change without notice. WEG Automation - Products and Solutions | 323
Information
General Pushbuttons and Pilot Lights
Accessories for CSW (22mm)
Mounting in Control Stations
Illumination Blocks with Integrated LED1)
Protection
Circuit
Standard
Image Voltage Color Diagram Catalog Number Price Multiplier
packing
White CSW-BIDLB-0E25 $16.60
Red CSW-BIDLB-1E25 $16.60
Disconnect
Switches
CSW-BIDLB-1E26 $16.60
Motor
Red
24 VAC/VDC
Green CSW-BIDLB-2E26 $16.60
50/60Hz
Yellow CSW-BIDLB-3E26 $16.60
Blue CSW-BIDLB-4E26 $16.60
Contactors
White X1
CSW-BIDLB-0E27 $16.60
Red CSW-BIDLB-1E27 $16.60
48 VAC/VDC
Green 1 piece CSW-BIDLB-2E27 $16.60 Z5
50/60Hz
Yellow CSW-BIDLB-3E27 $16.60
Overloads
Blue X2
CSW-BIDLB-4E27 $16.60
White CSW-BIDLB-0E10 $16.60
Red CSW-BIDLB-1E10 $16.60
110-130 VAC/VDC
Green CSW-BIDLB-2E10 $16.60
50/60Hz
Yellow CSW-BIDLB-3E10 $16.60
Enclosed
0.016 kg
Starters
Note: 1) Blocks specific for mounting in base or PBW plastic control stations.
and Pilot
Lights
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
A B
Information
General
Accessories for CSW (22mm)
Mounting in Flanges or Control Stations
Plastic Legend Plates
Protection
Circuit
Standard
Image Description Catalog Number Price Multiplier
packing
Disconnect
0.006 kg 2)
Switches
Translucent legend plates 27x18
5 pieces AP30T $8.00 Z5
mm without engraving
0.006 kg2)
Protectors
Motor
Emergency-Stop Plate
Image Description Standard packing Catalog Number Price Multiplier
Contactors
emergency pushbutton.
1 piece APEC-02 $7.50 Z5
0.009 kg
Overloads
Image Description Standard packing Catalog Number Price Multiplier
Enclosed
Starters
0.017 kg
Relays
ALSD1 $10.50
Lens to replace the
5 pieces ALSD2 $10.50 Z5
pilot lights color
ALSD3 $10.50
0.004 kg2
Pushbuttons
ALSD4 $10.50
and Pilot
Lights
Engraved Pushbutton Caps 1)
Image Description Function Standard packing Catalog Number List Price Multiplier
ACB1-30
Terminal
Blocks
ACB5-31
ACB5-32
Engraved caps for
flush 5 pieces ACB5-33 $1.50 Z5
Correction
Factor
Power
pushbuttons1)
ACB5-34
ACB5-35
Appendix Appendix
A
RESET ACB4-37
2) Unitary weight.
Data is subject to change without notice. WEG Automation - Products and Solutions | 325
Information
General Pushbuttons and Pilot Lights
Accessories for CSW (22mm)
Common Accessories - Mounting in Flanges or Control Stations
Pushbutton Caps
Protection
ACB0 $.90
ACB1 $.90
ACB2 $.90
Caps to replace the flush 5 pieces
Disconnect
ACB4 $.90
ACB5 $.90
0.005 kg2) All six colors 6 pieces ACB $.90
Protectors
Start ALBI-31
Rectilinear
Engraved internal caps for flush movement
ALBI-32
illuminated and extended illuminated Clockwise 5 pieces $2.00 Z5
pushbutton1) rotation
ALBI-33
Counter-
Overloads
clockwise ALBI-34
rotation
Feed ALBI-35
Hole Plug
Enclosed
Starters
0.010 kg2)
Degree of Protection
of Protection
Notes: 1
) Other engraving options under request
2) Unitary weight
3) Not compatible with PBW Control Station.
Information
General
CSW Series (22mm)
Plastic Engraved 27 x 18 mm Legend Plates1) for Control Stations
Protection
Circuit
START MANUAL AUTO
0.020 kg3)
Disconnect
Switches
Catalog Number Engraving Price Multiplier
AP30-204 HAND $1.75
AP30-205 AUTO $1.75
AP30-182) STOP $1.75
Protectors
AP30-11 OPEN $1.75
Motor
AP30-01 CLOSE $1.75
AP30-19 UP $1.75
AP30-02 DOWN $1.75
Contaqctors
AP30-04 FORWARD $1.75
Contactors
AP30-15 REVERSE $1.75
AP30-10 ON $1.75
AP30-132 OFF $1.75
AP30-12 POWER ON $1.75
Overloads
Overloads
AP30-14 RESET $1.75
AP30-17 START $1.75
Z5
AP30-16 RUN $1.75
AP30-206 FAST $1.75
AP30-207 SLOW $1.75
Enclosed
Enclosed
Starters
Starters
AP30-208 RIGHT $1.75
AP30-209 LEFT $1.75
AP30-210 INCH $1.75
AP30-032) EMERGENCY STOP $1.75
Relays
AP30-05 JOG $1.75
AP30-06 JOG FORWARD $1.75
AP30-07 JOG REVERSE $1.75
AP30-08 LOWER $1.75
Pushbuttons
AP30-13 $1.75
and Pilot
RAISE
Lights
AP30-147 FAULT $1.75
AP30-129 MANUAL $1.75
Terminal
Catalog Number Engraving Price Multiplier Catalog Number Engraving Price Multiplier
Blocks
AP30-21 HAND AUTO $1.75 AP30-24 OFF ON $1.75
AP30-27 START STOP $1.75 AP30-25 OPEN CLOSE $1.75 Z5
Z5
AP30-20 FOR REV $1.75 AP30-26 RUN JOG $1.75
Correction
Notes: 1
) Other engraving options under request;
2) Red plate engraved in white;
3) Unitary weight.
Data is subject to change without notice. WEG Automation - Products and Solutions | 327
Information
General Pushbuttons and Pilot Lights
CSW Series (22mm)
Technical Data
Protection
Applicable standards IEC 60947-5-1, VDE 0660, UL 508, CENELEC EN 50007, ISO 13850 (EN 418), IEC 60947-5-5
Certifications CE, cULus, BV, IRAM, PCT, RCC, ICONTEC
IP66 and IP40 (CSW-BD) according to IEC 60529
Degree of protection
Disconnect
Switches
Contact Block
Applicable standards IEC 60947-5-1, VDE 0660, UL 508, CENELEC EN 50007, ISO 13850 (EN 418), IEC 60947-5-5
Certifications CE, cULus, BV, IRAM, PCT, RCC, ICONTEC
Rated insulation voltage Ui 690 V
Overloads
380 2 380 2
500 1,5 500 1,5
600 1,2 600 1,2
Ue (V dc) Ie (A) Ue (V dc) Ie (A)
24 2,5 24 2,5
Pushbuttons
48 1,4 48 1,4
and Pilot
Lights
Terminal capacity (wire/cable with or without terminal) Minimum (1 x 0,5 mm2) and maximum (2 x 2,5 mm2)
Tightening torque 0,8 N.m
Ambient temperature allowed -25 ºC...+70 ºC
Appendix Appendix
Information
General
CSW Series (22mm)
Technical Data
Illumination Blocks with Integrated LED
Protection
Circuit
Applicable standards IEC 60947-5-1, UL 508
Operation voltage range 0,85...1,10 x Ue
Degree of protection (IEC 60529) IP20
Disconnect
Switches
Energy consumption (V ac/dc) 10 mA
Rated impulse voltage Ui (IEC 60947-1) 2,5 kV
Ambient temperature allowed - 25 ºC...+70 ºC
Average lifespan 100,000 hours
Protectors
Red 70 mcd
Motor
Yellow 115 mcd
Brightness White 275 mcd
Blue 64 mcd
Green 150 mcd
Contaqctors
Terminal capacity (wire/cable with or without terminal) Minimum (1 x 0,5 mm2) and maximum (2 x 2,5 mm2)
Contactors
Tightening torque 0,8 N.m
Overloads
Overloads
Applicable standards IEC 60947-5-1, UL 508
Degree of protection (IEC 60529) IP20
Rated impulse voltage Ui (IEC 60947-1) 4 kV
Ambient temperature allowed - 25 ºC...+70 ºC
Terminal capacity (wire/cable with or without terminal) Minimum (1 x 0,5 mm2) y maximum (2 x 2,5 mm2)
Enclosed
Enclosed
Starters
Starters
Tightening torque 0,8 N.m
Relays
Certifications CE
Degree of protection (IEC 60529) IP66 (NEMA 4X)
Ambient temperature allowed -25 ºC...+70 ºC
Pushbuttons
Material Polycarbonate (cover and base)
and Pilot
Lights
Cover color Gray (RAL 7035) or Yellow (RAL 1003)
Base color Black (RAL 9005)
Cable entry holes ØM20 / PG13,5 / 1/2” and ØM16 / 3/8”
Use in ambient External (UV rays) or internal
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 329
Information
General Pushbuttons and Pilot Lights
Assembly Configurations
Maximum Recommended Configuration of Contact Blocks for Each type of Head and Flange
X X
or or
Contactors
Emergency pushbutton Pushbutton Illuminated pushbutton Double pushbutton Illuminated double Triple pushbutton
pushbutton
CSW-BESG, CSW-BESP, CSW-BEG, CSW-BEY, CSW-BCI, CSW-BD, CSW2-BDF, CSW2- CSW2-BTF, CSW2-
CSW-BCT, CSW-BFI, CSW2-BDFI, CSW2-BDSI
Overloads
X X
Enclosed
Starters
Relays
or
Pushbuttons
and Pilot
Lights
14
25
28
Ø28
CA
BCT
BD
BEG
Ø31
Ø28
28
Ø31 Ø31
20
BFI
BGA
Ø40
Ø28
Ø31
28
Ø28
59
CKI
31
28
BEY
BCY
BF
Ø28
Ø28
Ø31
14
Ø31
SD
20 Ø30,5
Ø28
Ø31
Ø28
50
Ø40
28
Ø28
22
CY
CK
25
Ø28
BC
BCI
Ø31
Ø31
Ø31
12,8
Disconnect
Switches
53,1
53,1
30,5
30,5
Protectors
12,8
Motor
CSW2-BDF CSW2-BDS
Contactors
38,2 38,2
29,5
Overloads
52,9
30,5
52,9
30,5
14,5 29,5
Enclosed
Starters
12,8
CSW2-BTF CSW2-BTS
Relays
47 47 29,5 47
30,5
30,5
30,5
42
42
42
Pushbuttons
and Pilot
Lights
Information
General
CSW Series (22mm)
Dimensions (mm)
Protection
9,8 28,2 37,3
Circuit
44,4
42,3
Disconnect
Switches
BC10F/BC01F BIDLF-**CSW 13 30
Protectors
AF3F
Motor
94,2
71,2
Contaqctors
Contactors
48,2 10
30
Overloads
Overloads
41
50,9
Enclosed
Enclosed
Starters
Starters
AF3F + 1..3x Contact Block BC_F AF3F + Contact Block BC11/BC20/BC02
10 11,3
Relays
Pushbuttons
41
41
and Pilot
Lights
Terminal
Blocks
27,7 39,1
BC10/BC01/BCA10/BCR01 BIDL
Correction
Factor
Power
60
9,8 60,1
Appendix Appendix
80
A
44
54,3
BCM01 BR-3P
Data is subject to change without notice. WEG Automation - Products and Solutions | 333
Information
General Pushbuttons and Pilot Lights
CSW Series (22mm)
Dimensions (mm)
Protection
Circuit
47
47
Disconnect
Switches
49,5
30 13,8
13,7
Protectors
AF3 AF5
Motor
49,5
Contactors
46 30
5
Overloads
47
47
41
41
68 67
Pushbuttons
and Pilot
Lights
Terminal
Blocks
30 29,5 47 75,8
Correction
Factor
Power
Appendix Appendix
A
49,3
B
BES + BCM01-CSW
Information
General
CSW Series (22mm)
Dimensions (mm)
Protection
Circuit
0
22,5...25
3
0,12
Ø18
SH250
Disconnect
Switches
CSW-BHF437
Protectors
16 23 48
Motor
18 30
Ø30
Ø30
Ø75
60
Contaqctors
Contactors
APBF APBI
APBD
APEG
Overloads
Overloads
34
30
51
Enclosed
Enclosed
Starters
Starters
11
83
61.5
35
50
Ø28
Ø42
14 36
Ø59
Relays
AR30 APE ATR APP30 APP60 APEC
Pushbuttons
and Pilot
36,0
Lights
Terminal
Blocks
Ø22
72,9
Correction
Factor
Power
Appendix Appendix
A
58,2
B
DRCSWA
Data is subject to change without notice. WEG Automation - Products and Solutions | 335
Information
General Pushbuttons and Pilot Lights
CSW Series (22mm)
Dimensions (mm)
Protection
Bottom/Top
Circuit
58,2
Disconnect
Switches
18,5
58,2
58,2
M20
PG 13,5
18,5
18,5
18,5
Protectors
Side Base
Motor
18,5 18,5
4 x Ø4,5
18,5
M16
66,5
Contactors
4 x Ø4,5
PG 13,5
A
Overloads
104
33
M20
33
B A
33 CC
B A
4,5
4xØ
Enclosed
Starters
M16
C
16,4
16.4
66,7
34,5
34,5
79
79 79
Relays
1 74 66,7
1x
2 104 117 ØM20 ØM20 ØM20
ØM16
3 137 150 1 x ØPG13,5 9 to 16 mm 1 x ØPG13,5 9 to 16 mm ØPG13,5 9 to 16 mm 2x 7 to 10 mm
ØPG9
4 170 183 ؽ NPT ؽNPT 2 x ؽNPT
Terminal
6 236 249
Blocks
Correction
Factor
Power
Appendix Appendix
A B
Information
General
CSW Series (22mm)
Installation Distances (mm)
AF3/AF3F Flange AF5 Flange PBW Control Stations
Protection
Circuit
3,2 Ø22,5 3,2 Ø22,5
23,5
23,5
Disconnect
Switches
3,2 Ø22,5
52,01)
52,01)
23,5
Protectors
33,01)
32,01) 52,01)
Motor
Note: 1) M
inimum distance to use Pushbuttons (Flush/Extended/Guarded) or Selectors (Knob). To use others Pushbuttons or Selectors is
necessary to evaluate the head dimensions.
Contaqctors
Contactors
Overloads
Overloads
Enclosed
Enclosed
Starters
Starters
Relays
Pushbuttons
and Pilot
Lights
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 337
Information
General Pushbuttons and Pilot Lights
Standard Features
Contactors
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
A B
Information
General
CSW Series (30mm)
Pushbuttons
MULTIPLIER FOR CSW-30 SERIES
Protection
Types
Circuit
BF - Flush
BS - Extended
- Z55
BC - Mushroom
BGA - Recessed
BGAI - Illuminated Recessed
CSW30-__ __ __
BSI - Illuminated Extended Voltage (see Voltage Code) For illuminated only
Disconnect
BCI - Illuminated Mushroom
Switches
Color (see Color Code)
NON-ILLUMINATED NON-ILLUMINATED MUSHROOM NON-ILLUMINATED
FLUSH (Extended) (40mm HEAD) RECESSED
CSW30 - __ CSW30 - __ CSW30 - __ CSW30 -__
LIST PRICE
BF0 LIST PRICE
BS0 LIST PRICE
BC1 LIST PRICE $32
$26 $26 $37 BGA0
Protectors
BF1 BS1 BC2
Motor
BGA1
BF2 BS2 BC5
BGA2
BF3 BS3
BGA3
BF4 BS4
BGA4
Contactors
BF5 BS5
BGA5
Overloads
LIST PRICE
* Illuminated operators are supplied with LED block. To BSI0 $93 BCI0 BGAI0
complete selection, replace “*” with desired voltage:
E26 (24Vac/Vdc), D61 (120Vac/Vdc) or D66 (240Vac/Vdc). BSI1 BCI1 BGAI1
BSI2 BCI2 BGAI2
BSI3 BCI3 BGAI3
Enclosed
BSI4 BCI4 BGAI4
Starters
Emergency-Stop Pushbuttons Pilot Lights
Types
CSW30- __ __
Relays
G - Twist release
CSW-__ Voltage (see Voltage Code)
Color (see Color Code)
Pushbuttons
and Pilot
PILOT LIGHTS
E-STOP - TWIST RELEASE E-STOP - PUSH PULL
Lights
CSW30 - __ *
CSW30-BEG LIST PRICE CSW30-BEP LIST PRICE
$75 SD0 LIST PRICE
Code Chart
Color Clear/White Red Green Yellow Blue Black
Code 0 1 2 3 4 5
Appendix Appendix
Symbol
A
D61 120Vac/Vdc
D66 240Vac/Vdc
Data is subject to change without notice. WEG Automation - Products and Solutions | 339
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Selector Switches
Protection
Circuit
Types
CK - Knob
CA - Lever CSW30- __ __ __ ___
CY - Key
No. of Positions
Disconnect
Angle
Switches
Information
General
CSW Series (30mm)
Auxiliary Contacts
Our standard contact blocks are color coded for
Protection
Circuit
easy circuit identification to minimize wiring errors.
WEG’s contact blocks are stackable up to 4 deep
(for a total of up to 8 circuits per operator) without
the need of any additional accessory. Combining
different contact blocks types enable several
Disconnect
Switches
functions to be achieved.
Protectors
Motor
CONTACT BLOCKS
Normally Open LIST PRICE Normally Closed LIST PRICE Early Make LIST PRICE Late Break LIST PRICE
Contactors
Overloads
Accessories
CLAMP RING WRENCH 30MM HOLE PLUG THRUST AND TRIM WASHER
ATR30
CPAW30 CSW30-TTW
Enclosed
LIST PRICE
Starters
$4
$30 $25
Relays
Simplifies the tighening or
loosening of polyester and NEMA 4X rated plug to seal up
aluminum 1-3/8” clamp rings. unwanted panel holes. Anti-rotation ring
Pushbuttons
GUARD & LOCK-OFF ATTACHMENT
and Pilot
Lights
Reference WEG P/N Description List
3 1 CSW30-GAPB 30MM GUARD ATTACHMENT FOR MAINTAINED PUSH BUTTONS $40
2 CSW30-LO1 30MM LOCK OFF ATTACHMENT FOR STANDARD EXTENDED CAP $32
1 CSW30-LO2 30MM LOCK OFF ATTACHMENT FOR STANDARD MOMENTARY MUSHROOM $32
2 2
Terminal
CAP
Blocks
2
CSW30-LO3 30MM LOCK OFF ATTACHMENT FOR PUSH-PULL MTD MUSHROOM CAP OR $32
PUSH MTD EXTENDED CAP
3
CSW30-LO4 30MM LOCK OFF ATTACHMENT FOR MOST PUSH BUTTONS AND SELECTOR $50
SWITCHES
Correction
Factor
Power
$8.30
$10
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 341
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Special Operators
Protection
Circuit
POTENTIOMETER
CSW30-POT_W Resistance
LIST PRICE
$145
CSW30-POT __ W 1 - 1kΩ 10 - 10kΩ
Disconnect
Switches
2 - 2kΩ 50 - 50kΩ
5 - 5kΩ
Protectors
Motor
CSW30-RSBW BR3P-CSW30
LIST PRICE LIST PRICE
Contactors
$22 $37
Overloads
CSW30-WS CSW30-CPBT
LIST PRICE LIST PRICE
$65 $130
Pushbuttons Relays
LED Bulbs
and Pilot
Lights
Replacement LED bulbs for 240Vac/Vdc illuminated operators are the “E26” (24Vac/Vdc)
bulbs. Please refer to the correct color when ordering.
Information
General
CSW Series (30mm)
Protection
Circuit
List Price Package
Catalog Number Marking Description
with 1 unit
For Pushbuttons & Indicating Lights
APP30S-01 Close 30mm Legend Plate & Holder - Close $6
Disconnect
Switches
APP30S-02 Down 30mm Legend Plate & Holder - Down $6
APP30S-03 Emergency Stop 30mm Legend Plate & Holder - Emergency Stop $6
APP30S-04 Forward 30mm Legend Plate & Holder - Forward $6
APP30S-05 Jog 30mm Legend Plate & Holder - Jog $6
APP30S-06 Jog Forward 30mm Legend Plate & Holder - Jog Forward $6
Protectors
APP30S-07 Jog Reverse 30mm Legend Plate & Holder - Jog Reverse $6
Motor
APP30S-08 Lower 30mm Legend Plate & Holder - Lower $6
APP30S-09 Off 30mm Legend Plate & Holder - Off $6
APP30S-10 On 30mm Legend Plate & Holder - On $6
APP30S-11 Open 30mm Legend Plate & Holder - Open $6
APP30S-12 Power On 30mm Legend Plate & Holder - Power On $6
Contactors
APP30S-13 Raise 30mm Legend Plate & Holder - Raise $6
APP30S-14 Reset 30mm Legend Plate & Holder - Reset $6
APP30S-15 Reverse 30mm Legend Plate & Holder - Reverse $6
APP30S-16 Run 30mm Legend Plate & Holder - Run $6
APP30S-17 Start 30mm Legend Plate & Holder - Start $6
APP30S-18 Stop 30mm Legend Plate & Holder - Stop $6
Overloads
APP30S-19 Up 30mm Legend Plate & Holder - Up $6
APP30S-147 Fault 30mm Legend Plate & Holder - Fault $6
APP30S-100 Auto 30mm Legend Plate & Holder - Auto $6
APP30S-101 Fast 30mm Legend Plate & Holder - Fast $6
APP30S-102 Hand 30mm Legend Plate & Holder - Hand $6
Enclosed
Starters
APP30S-103 Low 30mm Legend Plate & Holder - Low $6
APP30S-104 Manual 30mm Legend Plate & Holder - Manual $6
APP30S-105 Out 30mm Legend Plate & Holder - Out $6
APP30S-106 Overload 30mm Legend Plate & Holder - Overload $6
APP30S-107 Push-to-Reset 30mm Legend Plate & Holder - Push-to-Reset $6
APP30S-108 Slow 30mm Legend Plate & Holder - Slow $6
Relays
APP30S-109 Trip 30mm Legend Plate & Holder - Trip $6
APP30S-148 Motor Run 30mm Legend Plate & Holder - Motor Run $6
APP30S-149 Power Off 30mm Legend Plate & Holder - Power Off $6
APP30S-150 Push-to-Test 30mm Legend Plate & Holder - Push-to-Test $6
APP30S-151 Test 30mm Legend Plate & Holder - Test $6
Pushbuttons
and Pilot
Lights
For two-position Selector Switch
APP30S-20 Forward -Reverse 30mm Legend Plate & Holder - Forward Reverse $6
APP30S-21 Hand - Auto 30mm Legend Plate & Holder - Hand Auto $6
APP30S-22 Jog - Run 30mm Legend Plate & Holder - Jog Run $6
APP30S-23 Manual - Auto 30mm Legend Plate & Holder - Manual Auto $6
Terminal
Blocks
APP30S-24 Off - On 30mm Legend Plate & Holder - Off On $6
APP30S-25 Open - Close 30mm Legend Plate & Holder - Open Close $6
APP30S-26 Run - Jog 30mm Legend Plate & Holder - Run Jog $6
APP30S-27 Start - Stop 30mm Legend Plate & Holder - Start Stop $6
APP30S-28 Up - Down 30mm Legend Plate & Holder - Up Down $6
Correction
APP30S-154 Local - Remote 30mm Legend Plate & Holder - Local Remote $6
APP30S-156 Reverse - Forward 30mm Legend Plate & Holder - Reverse Forward $6
APP30S-157 Stop - Start 30mm Legend Plate & Holder - Stop Start $6
APP30S-110 Auto - Hand 30mm Legend Plate & Holder - Auto Hand $6
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 343
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Engraved Legend Plates
with 1 unit
For two-position Selector Switch
APP30S-111 Auto -Manual 30mm Legend Plate & Holder - Auto Manual $6
APP30S-112 Fast - Slow 30mm Legend Plate & Holder - Fast Slow $6
Disconnect
APP30S-113 High - Low 30mm Legend Plate & Holder - High Low $6
Switches
APP30S-114 Inch - Run 30mm Legend Plate & Holder - Inch Run $6
APP30S-115 Left - Right 30mm Legend Plate & Holder - Left Right $6
APP30S-116 On - Off 30mm Legend Plate & Holder - On Off $6
APP30S-119 Raise - Lower 30mm Legend Plate & Holder - Raise Lower $6
APP30S-120 Slow - Fast 30mm Legend Plate & Holder - Slow Fast $6
Protectors
APP30S-121 Summer - Winter 30mm Legend Plate & Holder - Summer Winter $6
Motor
APP30S-32 Manual - Off - Auto 30mm Legend Plate & Holder - Man Off Auto $6
APP30S-33 Open - Off - Auto 30mm Legend Plate & Holder - Open Off Auto $6
APP30S-34 Open - Off - Close 30mm Legend Plate & Holder - Open Off Close $6
APP30S-35 Up - Off - Down 30mm Legend Plate & Holder - Up Off Down $6
APP30S-198 Low - Med - High 30mm Legend Plate & Holder - Low Med High $6
Overloads
APP30S-199 Low - Off - High 30mm Legend Plate & Holder - Low Off High $6
APP30S-158 Down - Off - Up 30mm Legend Plate & Holder - Down Off Up $6
APP30S-159 Jog - Off - Auto 30mm Legend Plate & Holder - Jog Off Auto $6
APP30S-160 Raise - Off - Lower 30mm Legend Plate & Holder - Raise Off Lower $6
APP30S-161 Local - Off - Remote 30mm Legend Plate & Holder - Local Off Remote $6
APP30S-162 Forward - Auto - Rev 30mm Legend Plate & Holder - Fwd Auto Rev $6
Enclosed
Starters
APP30S-122 Auto - Manual - Off 30mm Legend Plate & Holder - Auto Manual Off $6
APP30S-123 High - Off - Low 30mm Legend Plate & Holder - High Off Low $6
APP30S-124 Off - Run - Start 30mm Legend Plate & Holder - Off Run Start $6
APP30S-125 Off - Start - Run 30mm Legend Plate & Holder - Off Start Run $6
APP30S-126 Off - 1 - 2 30mm Legend Plate & Holder - Off 1 2 $6
APP30S-127 Slow - Off - Fast 30mm Legend Plate & Holder - Slow Off Fast $6
Relays
APP30S-128 Summer - Off -Winter 30mm Legend Plate & Holder - Summer Off Winter $6
APP30S-129 1 - Off - 2 30mm Legend Plate & Holder - 1 Off 2 $6
APP30S-130 1-2-3 30mm Legend Plate & Holder - 1 2 3 $6
For Push/Pull units
Pushbuttons
and Pilot
Lights
Start
Blocks
APP30S-117 Push Off - Pull On 30mm Legend Plate & Holder - Push Off / Pull On $6
APP30S-118 Push On - Push Off 30mm Legend Plate & Holder - Push On / Push Off $6
For Potentiometers
APP30S-P00 0 - 100 30mm Legend Plate & Holder - (Blank 0 - 100) $6
Correction
Information
General
CSW Series (30mm)
Technical Data
ELECTRICAL RATINGS - 30MM INDUSTRIAL PILOT DEVICES
Protection
Circuit
Lamp Industry Rated Volts Lumens (MSCD) Design Life Current Draw Lamp Shock & Leakage
Number (Hrs.) (mA) Type Vibration Protection
BIDL6 ** 6V Varies w/ Color 100,000 50 LED Excellent 14 mA
Disconnect
Switches
BIDL24 ** 24V 2000 mcd 100,000 <20 LED Excellent 4 mA
BIDL130 ** 120/130V Typical 100,000 <10 LED Excellent 2 mA
*Specify lamp color when ordering.
Protectors
Motor
Standard Contacts Utilization
Category
IEC UL Make Rating Break Ith-Thermal
Rating Current
Contactors
AC AC-15 A600 7200VA 720VA 10A
DC DC-13 P300 138VA 138VA 5A
Note: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith. For DC voltages below 28V DC the max. allowed switching current is 5A
=Ith.
For switching applications below 24V/40mA - Hermetic REED contacts are recommended. Hermetic Reeds are also excellent in environments containing
chemical vapors, oxidizing agents, and explosive gases. Please refer to the HAZARDOUS section of the 30mm devices for more information.
Overloads
Environmental Ratings Materials Materials
Operating Temperature Thermoplastic Polyester and Polyester Blends (UV Pushbuttons (Operator Only)
-40 to +131° F ( -40 to +55° C ) Stabilized for outdoor use)
Enclosed
Momentary 1.3 lbs. [5.8N]
Starters
Storage Temperature Operator Housings
Illuminated Momentary 2.8 lbs. [12.4N]
-40 to +185° F ( -40 to +85° C ) Operator Caps and Handles - Non-illuminated (Glass
Reinforced Grades) Maintained 4 to 6 lbs [17.9~26.7 N]
Operating environments below freezing temperatures
are assumed to be absent of Mounting Rings and Nuts Illuminated Maintained 4.6 lbs. [20.5 N]
freezing liquids or pollutants.
Thrust Washer Reset Push Button 1.5 lbs. [6.7 N]
Relays
Trim Washer Selector Switches
Terminal & Wiring Consideration
High Impact Polycarbonate Maintained 1.7 in-lbs [.19 Nm]
Wire - AWG 22-12 CU (UV Stabilized for outdoor use)
Momentary 1.7 in-lbs [.19 Nm]
(Copper Only - Solid & Stranded [.5~4 mm2] Pilot Light Lens
One or Two wires permitted per termination
Pushbuttons
Key Operated 1.7 in-lbs [.19 Nm]
Transparent Pushbutton and Mushroom Caps
and Pilot
Recommended Tightening Torque
Lights
Cable Pull
7 lb-in (+3.0/-0.0 lb-in – [.8 Nm] Custom Polymers
Standard 4 to 6 lbs [17.9~26.7 N]
Certain CAM and Bearing parts are Teflon, Silicone,
& Moly-Disulfide Impregnated for improved Heavy Duty 13 lbs. [57.8 N]
Mechanical Design Life Cycles wearability
Push-Twist Release 4.7 lbs [20.9 N]
Push Buttons Fluorosilicone and Thermoplastic Neoprene Boot
Terminal
Accessories Potentiometer
Blocks
Momentary 5,000,000
Seals 2 Watt “J” Series 3-12 in-oz [.11 Nm Max.]
Maintained 250,000 (300° Rotation)
Neoprene Gaskets
Selector Switches 500,000 Standard Contact Blocks 1 lb. [4.45 N]
Thermoplastic - Molded Neoprene and alloy
All Other Devices 250,000 derivities Indicating Lights Refer to the appropriate
Correction
Lamp Data
BUNA N - Rubber - Teflon Coated
Factor
Power
Data is subject to change without notice. WEG Automation - Products and Solutions | 345
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Momentary & Maintained Non-Illuminated Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Protection
Circuit
1-11/16”
(42.9mm)
Protectors
11/16”
1-9/16”
(17.5mm)
(39.7mm)
Contactors
1-11/16”
(42.9mm)
2-Position Push-Pull 2-Position Push-Pull Maintained 2-1/4” (57.2mm) 2-Position Push-Twist Maintained
Maintained 1-1/2” (38mm) Jumbo Mushroom Cap 1-1/2” (38mm) Mushroom Cap
Mushroom Cap
Terminal
Blocks
1-9/16”
1-7/16” (39.7mm)
(36.5mm)
Correction
1-5/8”
Factor
Power
(41.3mm)
Appendix Appendix
A B
Information
General
CSW Series (30mm)
Momentary Illuminated Push Buttons
Protection
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Circuit
Illuminated Full Voltage, Resistor Illuminated Full Voltage Operators
and Dual-Input Operators
Disconnect
Switches
Protectors
Illuminated Guarded Lens
Motor
Illuminated Shrouded
1-11/16”
Mushroom Lens (42.9mm)
1-3/4” 1-1/2”
1-7/16” 1-1/2” (44.5mm) 1-5/8” TABLE 1- MOUNTING GASKETS
(39.1mm) (41.3mm)
(36.5mm) (39.7mm) PANEL THICKNESS GASKETS*
1-15/16” 1/16" 4
(49.2mm) 1/8" 3
Contactors
3/16" 2
1-5/8”
1/4" 1
(41.3mm)
1-9/16” * REMOVE ONE ADDITIONAL GASKET
WHEN USING A LEGEND PLATE
(39.7mm)
NOTES:
Overloads
1) MOUNTING HOLE IN PANEL - ÿ1-3/16 (30MM)
Enclosed
P.O. BOX 496 BEAVER, PA 1
Starters
UNLESS OTHERWISE
SPECIFIED Description:
Relays
Pushbuttons
and Pilot
Lights
Reset Push Button Alternate Action Block
Terminal
Blocks
Fully-assembled operators come standard with one 3/16” (4.8mm)
and three 1/16” (1.6mm) gaskets. 11/16”
(17.5mm) 2-3/16”
(55.6mm) Correction
1-11/16”
Factor
Power
(42.9mm)
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 347
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Wobble stick
Fully-assembled operators come standard with one 3/16”
Protection
1-1/2”
(39.7mm)
3-3/16” MULTIPLE
(80.96mm) GASKETS
7/8”
1-9/16” (22.2mm)
(39.7mm) ADD PER
Disconnect
Switches
CONTACT
1-5/8” 1-5/8”
(41.3mm) (41.3mm)
ø1-3/16”
(ø80.96mm)
Protectors
MOUNTING HOLE
1/4”
Motor
(6.3mm)
1" 1-3/4"
(25.4mm) (44.5mm) 1-9/16"
(39.7mm) 1-9/16”
(39.7mm)
1-3/8"
(34.9mm)
1-9/16"
Panel Thk. shown B (39.7mm) B
Enclosed
1 2 3
Starters
3/16" (4.8mm)
1
1 3
Contact Block Contact Block
& 0
(shown with IP20 Terminal Guard)
Relays
LOCATION FOR
15/16" M6 TERMINAL 2 IS THE COMMON
(24.5 mm)
7/8" CLOCKWISE
BLOCK MARKER
(21.6 mm) KNOB ROTATION 1 ‘ 2 IS DECREASING
AS SEEN FROM RESISTANCE (” &)
THE FRONT OF
THE PANEL 3 ’ 2 IS INCREASING
RESISTANCE (‘ Ω)
Pushbuttons
and Pilot
1-5/8"
Lights
(41.1 mm)
A A
Cable Pull Operators
Terminal
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Blocks
(22.5mm)
Add'l
Factor
Power
Information
General
CSW Series (30mm)
Maintained flush & extended push button caps
Protection
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Circuit
Maintained Flush Push Button Cap
Maintained Extended
(shown with an operator and
Disconnect
Push Button Cap
Switches
contact block)
Protectors
Motor
Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.
Contactors
Full Voltage Pilot Light Operator Resistor Pilot Light Operators Dual Input
Pilot Light Operator
1-7/8”
Overloads
(47.3mm) 1-7/64”
(28.2mm) 2-11/64”
11/16” 25/128”
1-3/4” (55.1mm) (5mm)
(17.7mm) (44.4mm)
1-13/16” 1-1/16”
(46mm) (27.1mm)
1-5/8”
(41.2mm)
Enclosed
1”
Starters
(25.4mm) (4.7mm) Guard
Relays
Multi-Voltage Pilot Light Drilling
Fully-assembled operators come standard with four CSW30 Panel Cutout
1/16” (1.6mm) gaskets.
Pushbuttons
and Pilot
Lights
Multi-Voltage Pilot Light
1-1/64”
(25.8mm) 2-1/128”
1-5/8” 25/128”
Terminal
(51mm) (5mm)
Blocks
(41.2mm)
1-5/8”
(41.2mm)
IP20 Terminal
3/16” Guard
1-1/128” (4.7mm)
Correction
(25.5mm)
Factor
Power
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 349
Information
General Pushbuttons and Pilot Lights
CSW Series (30mm)
Push-To-Test Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Protection
Circuit
1-9/16” 1-5/8”
(39.7mm) (41.3mm)
Selector switches
Overloads
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
lock-off attachment
Pushbuttons
and Pilot
Lights
5-7/64"
(129.8mm) 2-11/16"
(68.1mm)
2-11/16"
(68.1mm)
1-15/32”
(37.5mm) 1-21/32”
CAVITY (42mm)
2” 1-55/64" HEIGHT
(47mm)
Terminal
(50.9mm)
Blocks
ø1-7/32” 37/64”
(ø30.7mm) (14.7mm)
3/16”
(4.7mm)
Correction
Factor
Power
Appendix Appendix
A B
Information
General
CSW30H Series (30mm) Hazardous Duty
General Standards
Protection
Circuit
WEG hazardous duty series CSW30H also offers a wide selection of operators and pilot devices for hazardous duty
applications (Class 1, Division 2 and Zone 2). This series offers a wide selection of hermetically sealed reed and factory
sealed contact blocks for superior corrosion resistance.
Disconnect
• NEMA 4, IP65 Rated1
Switches
• Fits 1-13/64 (30.5mm) hole without notch required
• Contact blocks snap-in (fast & easy assembly)
• Up to 8 contact blocks for non-illuminated operators and
up to 4 contact blocks for illuminated operators
• LED lamps with built-in leakage protection
Protectors
• Same simple part numbering system as 22mm series
Motor
WEG Hazardous duty Pilots Devices Logic Reeds provide great operation
Contactors
are specially engineered for Class 1, for low power level ( resistive loads
Division 2 and Zone 2. only ), especially PLC inputs.
Overloads
block. layer of protection from corrisive chemicals left
behind from hands on operations or
washdown environments.
An all-polyester construction with
Enclosed
Starters
nickel-plated or stainles steel metal
parts for superior corrision
resistance.
Relays
Providing needed dependability for
harsh environments.
Pushbuttons
and Pilot
Lights
Added Security - Standard Features
All Hazardous duty Push Buttons comes standard with
a screw tightening mounting bracket to ensure the contact
blocks remain tight to the operator
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
A
Data is subject to change without notice. WEG Automation - Products and Solutions | 351
Information
General Pushbuttons and Pilot Lights
CSW30H Series (30mm) Hazardous Duty
Pushbuttons
Types MULTIPLIER SYMBOL FOR CSW30H
Protection
Circuit
CSW30H-__ __ __
BC - Mushroom
BGA - Recessed
BGAI - Illuminated Recessed
Voltage (see Voltage Code)
Disconnect
BCI3
Starters
BSI3
BCI4 BGAI4
BSI4
Relays
Emergency-Stop Pushbuttons
Types
CSW30H- __ __
Pushbuttons
and Pilot
Lights
G - Twist release
CSW30H-__ P - Pull release
Voltage (see Voltage Code)
Color (see Color Code)
PILOT LIGHTS
E-STOP - TWIST RELEASE E-STOP - PUSH PULL
CSW30H - __ *
Terminal
Blocks
SD4
Code Chart
Appendix Appendix
Code 0 1 2 3 4 5
Symbol
B
Information
General
CSW30H Series (30mm) Hazardous Duty
Selector Switches
Types
Protection
CK - Knob
Circuit
CA - Lever CSW30H- __ __ __ __
No. of Positions Handle
Angle F - Maintained
2 - Two positions R - Spring return
Disconnect
45 - 45o
Switches
3 - Three positions 90 - 90o RE - Spring return from left
RD - Spring return from right
Protectors
Motor
Catalog Number List Price Multiplier
Contactors
LIST PRICE LIST PRICE CSW30-FCR $15 Z5
Maintained $44 Maintained $44
Spring Return $62.00 Spring Return $62
CSW30-ECR $15
Overloads
CSW30H-CK2R90 CSW30H-CA2R90 1
Enclosed
Starters
CSW30H-CK3RE45 CSW30H-CA3RE45 2&3
Relays
DIAGRAM 1 - Hermetically &
DIAGRAM 2 - Factory Sealed Block DIAGRAM 3 - Hermetically Sealed Block
Pushbuttons
Factory Sealed Block
and Pilot
HANDLE POSITION Auxiliary Mouting HANDLE POSITION Auxiliary Mouting HANDLE POSITION Auxiliary Mouting
Lights
I II Contact Position I 0 II Contact Position I 0 II Contact Position
O X NO Either X O O X O O NO Left
NO & NC Left
X O NC Either O X O O O X NO Right
O X O O X O X X NC Left
NO & NC Either NO & NC Right
Terminal
Blocks
X O O X O X X O NC Right
wired in
X O X 2NO
parallel
X = CLOSED
O = OPEN wired in
O X O 2NC
series
Correction
Factor
Power
Data is subject to change without notice. WEG Automation - Products and Solutions | 353
Information
General Pushbuttons and Pilot Lights
CSW30H Series (30mm) Hazardous Duty
Auxiliary Contact Blocks - Factory Sealed (720VA) Product Catalog Number List
Multiplier
Decsription Price
Linear devices - 1NO & 1NC BC11FS-CSW30H
$120 Z55
For rotary devices only - 1NO & 1NC BC11FSR-CSW30H
Disconnect
Product Decsription
Power reed - 1NO BC10PR-CSW30H
$95
Power reed - 1NC BC01PR-CSW30H
Power reed - 2NO BC20PR-CSW30H Z55
Protectors
Motor
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
A B
Information
General
CSW30H Series (30mm) Hazardous Duty
Technical Data
FACTORY SEALED: Contact Blocks are Certified as ”Explosion Proof”. Devices employing this method of protection are designed so that all electrical parts are enclosed
in a switch housing that is capable of withstanding, without damage, an explosion of a specified gas or vapor/air mixture which may occur during the operation of the
Protection
switch. Further, the explosion internal to the switch body is controlled so that the hot gases are extinguished and cooled before they are
Circuit
allowed to escape to the surrounding atmosphere.
HERMETICALLY SEALED: Contact Blocks are Certified as “Non-Incendive”. Devices employing this method of protection are designed so that all electrical parts
are a bonded part of the switch housing that forms an arcing chamber that is evacuated of all oxygen, filled with an inert gas, and then sealed to prohibit the exchange
of gases with the surrounding environment. These devices are incapable of igniting the surrounding gases or vapor/air mixtures under normal
operation. Devices of this type are suitable for use in Div. 2/ Zone 2 applications. Hermetically Sealed contact blocks are also extremely useful for switching
low energy circuits or circuits applied in atmospheres containing oxidizing agents and pollutants that might effect the performance of silver switching and metal contact
Disconnect
Switches
elements. Hermetically Sealed Switch performance is consistent and repeatable in almost any environment.
DIELECTRIC STRENGTH (MECHANICAL CONTACTS) 2200V for 1 Minute
Factory Sealed Contact Block Hermetically Sealed Mid-Power Reed Contact Block
Class I Div. 2 Gr. B,C, & D / Zone 2 Gr. IIB +H2 Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Protectors
Utilization Category
Motor
Utilization Category
IEC UL Make Break Ith-Thermal IEC UL Make Break Ith-Thermal
Rating Rating Current Rating Rating Current
AC AC-15 A600 7200VA 720VA 10A AC AC-15 C300 1800VA 180VA 2.5A
Contactors
DC DC-13 Q300 69VA 69VA 2.5A DC DC-13 Q150 69VA 69VA 2.5A
NOTE: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith. NOTE: For AC voltage below 72VAC the max. allowed switching current is 2.5A = Ith.
For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith. For DC voltages below 28VDC the max. allowed switching current is 2.5A = Ith.
For switching applications below 24V/40mA, Hermetic REED contacts are recommended. Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Hermetically Sealed Power Reed Contact Block Hermetically Sealed logic reed Contact Block
Overloads
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Utilization Category Utilization Category
Enclosed
AC AC-15 B300 3600VA 360VA 5A
Starters
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
AC-15 C600 1800VA 180V 2.5A
DC DC-13 Q300 69VA 69VA 2.5A Indicating Lights
NOTE: For AC voltage below 72V AC the max. allowed switching current is 5A = Ith. Light Unit T-Code
For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith.
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
FV Incandescent Lights T4A
Relays
FV LED Lights T6 [No marking required]
Hermetically Sealed mid-logic reed Contact Block
Resistor Lights T3C
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Light Unit T-Code
Utilization Category
Pushbuttons
Resistor LED Lights T6
IEC UL Inductive Resistive Ith-Thermal
and Pilot
Lights
Current Transformer Lights Incd. & LED T4A
AC AC-12 250V Max. 40VA 100 Watt 3A Multi-Voltage 20V-240V LED Light T4A
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Environmental Ratings
Materials
Type 1, 2, 3, 3R, 4/4X, 12, 13, and IP65
Terminal
Thermoplastic Polyester and Polyester Blends Seals
Blocks
(UV Stabilized for outdoor use) Operating Temperature
Operator Housings Neoprene Gaskets
-40 to +131° F ( -40 to +55° C )
Operator Caps and Handles – Thermoplastic – Molded Neoprene and alloy de-
rivitives Storage Temperature
Non-Illuminated (Glass Reinforced Grades) BUNA N – Rubber – Teflon Coated
Correction
Pilot Light Lens Internal tubes for Maintained Devices Terminal & Wiring Consideration
A
Transparent PB and Mushroom Caps Detents for Maintained Devices Wire- AWG 22-12 CU
Custom Polymers Stainless Steel Springs and Screws throughout
(Copper Only – Solid & Stranded) [.5 ~ 4
Certain CAM and Bearing parts are Teflon, Silicone, Aluminum
mm2 ]
B
Data is subject to change without notice. WEG Automation - Products and Solutions | 355
Information
General Pushbuttons and Pilot Lights
CSW30H Series (30mm) Hazardous Duty
1-11/16” 1-11/16”
(42.9mm) (42.9mm)
Overloads
1-9/16”
1-7/16" (39.7mm)
ø1- 7/8" Operator Hsg.
(ø45.2mm) (36.5mm)
2-1/8”
(54mm)
1-5/8”
(41.3mm)
Operator Hsg.
Relays
1- 3/16"
(30.2mm) 2-7/16” (61.9mm)
Mounting Bracket
Pushbuttons
and Pilot
Lights
2-1/8"
(54mm)
Correction
Factor
Power
Panel Thk.
(3/16" (4.8mm) shown)
Appendix Appendix
A B
Information
General
CSW30H Series (30mm) Hazardous Duty
Maintained non-Illuminated H-Line Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Protection
Circuit
2-Position Push-Pull Maintained 2-Position Push-Pull Maintained Operator
1-1/2” (38mm) Mushroom Cap (shown with 2-1/4” (57.2mm) Jumbo Mushroom Cap)
Disconnect
Switches
Protectors
Motor
Momentary Illuminated H-Line Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Contactors
Illuminated Full Voltage Operator Illuminated Transformer, Resistor
and Dual Input Operators
Overloads
Enclosed
Starters
Illuminated Push Button Illuminated Shrouded Illuminated Guarded Lens
Mounting Bracket Mushroom Lens
1-7/16”
(36.5mm) 1-3/4”
1-1/2” 1-11/16” (44.5mm)
(39.7mm) (42.9mm)
ø1-15/16”
Relays
(ø49.2mm)
1-9/16” 1-5/8”
(39.7mm) (41.3mm)
Pushbuttons
and Pilot
2-Position Push-Pull Maintained Illuminated H-Line Push Buttons
Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
1-5/8" 1-9/16"
(41.3mm) (39.7mm)
Correction
Factor
Power
Panel Thk.
(3/16" (4.8mm) shown)
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 357
Information
General Pushbuttons and Pilot Lights
CSW30H Series (30mm) Hazardous Duty
H-Line Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.
Protection
Circuit
Full Voltage Pilot Light Operator Transformer & Resistor Pilot Dual Input
Light Operators Pilot Light Operator
Disconnect
Switches
Protectors
Motor
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
2-1/8"
(54mm)
Enclosed
Starters
Panel Thk.
(3/16" (4.8mm) shown)
1-7/16” 1-3/4”
Relays
1-3/4”
1-11/16” (36.5mm) (44.5mm) ø1-15/16”
(44.5mm)
(42.9mm) (ø49.2mm”)
1-5/8” 1-5/8”
(41.3mm)
(41.3mm)
Pushbuttons
and Pilot
Lights
Information
General
CSW30H Series (30mm) Hazardous Duty
Protection
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Circuit
Selector Switch Operator Selector Switch Lever Handle
(shown with standard handle)
Disconnect
Switches
Protectors
Motor
Selector Switch Mounting Bracket
Contactors
Overloads
H-line contact blocks
Factory Sealed Contact Block Power Reed, Mid-Power Reed & Medium Logic
Reed Contact Blocks
Enclosed
Starters
Relays
Pushbuttons
and Pilot
Lights
Logic Reed Contact Block
Terminal
Blocks
Correction
Factor
Power
Appendix Appendix
B A
Data is subject to change without notice. WEG Automation - Products and Solutions | 359
Information
General Pushbuttons and Pilot Lights
CSW30H Series (30mm) Hazardous Duty
Maintained Flush & Extended h-line Push Button Caps
Maintained Extended
Protection
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets. Push Button Cap
Circuit
1-15/16” 1-3/4”
(49.5mm) (45.2mm)
Enclosed
Starters
Lock-off attachment
Relays
5-7/64"
(129.8mm) 2-11/16"
(68.1mm)
2-11/16"
(68.1mm)
Pushbuttons
and Pilot
1-15/32”
Lights
(37.5mm) 1-21/32”
CAVITY (42mm)
2” 1-55/64" HEIGHT
(50.9mm) (47mm)
ø1-7/32” 37/64”
(ø30.7mm) (14.7mm)
3/16”
Terminal
(4.7mm)
Blocks
Correction
Factor
Power
Appendix Appendix
A B