Professional Documents
Culture Documents
Veterinary Positioning Table: Assembly Instructions
Veterinary Positioning Table: Assembly Instructions
EN
assembly instructions
30026340
The manufacturer, assembler and importer are responsible for the safety, reliability and
performance of the unit only if:
- installation, calibration, modification and repairs are carried out by qualified
authorised personnel
- electrical installations are carried out according to the appropriate requirements such
as IEC 60364
- equipment is used according to the operating instructions.
Planmed pursues a policy of continual product development. Although every effort is
made to produce up-to-date product documentation this publication should not be
regarded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.
COPYRIGHT PLANMED
Publication number 30026340 Revision 1
Released 5 June 2020
Table of contents
CAUTION
Do not overtighten the nuts or bolts while assembling the Veterinary
Positioning Tray, the maximum tightening torque is 8 Nm.
CAUTION
Do not overload Veterinary Positioning Table, maximum load is 100 kg (220
lbs).
CAUTION
Do not overload Veterinary Positioning Tray, maximum load is 20 kg (44 lbs).
Dimensions
Length 1266 mm / 50" (with tray 1666 mm / 65.6")
Width 600 mm / 23.7" (with tray 1066 mm / 42")
Height 815 mm / 32.1" (with tray 822 mm / 32.4")
Footprint 0.72 m2 / 7.75 sq ft (with tray 0.82 m2 / 8.8 sq ft)
Weight 38 kg / 83,8 lbs (with tray 39.2 kg / 86.42 lbs)
8. Attach the bottom plate so that the end with the holes are attached first
and then the end with the notches. Insert the washers and attach them
with the nuts using a 13 mm Allen key.
11. Verify that the table top locks to both end positions.