Professional Documents
Culture Documents
Electrically non-conductive, FM-200 At its design concentration, FM-200 Additionally, it leaves no oily residue or
works by removing heat from a fire so does not sufficiently deplete the deposits to damage software, data files
that combustion cannot be sustained. oxygen level to a point where it is or communications equipment, meaning
When it comes to being safe for use, unsafe for occupants to remain in post-discharge clean up time and costs
FM-200 delivers, which is why FM-200 the room. are minimal.
systems are approved by, FM and UL
listed; an ideal solution where FM-200 agent is stored in cylinders as Its use as a fire suppressant is not
personnel safety and process a liquid, super-pressurised with nitrogen inhibited by the Montreal Protocol.
continuity are paramount. so requiring only a very small storage Indeed, it is a clean agent that belongs
'footprint'. to a class of compounds that was
The decision to use FM-200 can be introduced specifically to facilitate the
based on a number of key factors: it is The discharged gas flows through phase-out of ozone depleting gases,
the most widely used of the chemical a piping network into the protected such as Halon 1301.
replacements for Halon 1301 and it is area, where it is applied to suppress
an agent that has been used to the fire through heat absorption.
successfully protect tens of thousands
Significantly, there is no risk of thermal
of high-technology facilities in 70
shock to delicate electronic equipment
countries around the world.
and FM-200 is electrically
non-conductive and non-corrosive.
FM-200 ®
Proven in thousands of
successful installations
worldwide
Offices:
Czech Republic (Liberec) Singapore (Asia Pacific) United Arab Emirates (Dubai)
Tel: + 420 482 736 291 Tel: +65 (0)6577 4360 Tel: +971 (0)4 883 8689
Fax: + 420 482 736 293 Fax: +65 (0)6481 8791 Fax: +971 (0)4 883 8674