Professional Documents
Culture Documents
Controllers and
Transmitters
Low-emission Operation:
Open design for easy access
Output Signal
Proportional Only Control or Proportional-
Plus-Reset Controllers and Transmitters
ᔢ 3 to 15 psig ᔢ 6 to 30 psig
Differential Gap Control
ᔢ O to 20 psig ᔢ O to 35 psig
Engineered
Performance
2 Specifications
Proportional Band Adjustment: 3 to 100% 50°F (28°C change for a controller set at 100%
(3 to 15 psig) or 6 to 100% (6 to 30 psig) of sensing Proportional Band)
element range Reset Control Only: Output pressure changes
Repeat Adjustment: 0.01 to 100 repeats per +_ 2.0% of sensing element rating for each 50°F
minute (0.01 to 74 minutes per repeat) (28°C) change for a controller set at 100%
Proportional Band
Differential Gap Controller: 15 to 100% of
sensing element range. Supply and Output Connections:
1/4 inch NPT female
Remote Set Point Signal: 3 to 15 psig for
Supply and Output Gauges:
controller with 3 to 15 psig output signal; 6 to 30
Available with scale indications of psig,
psig for controller with 6 to 30 psig output signal
kg/cm2, kPa
Zero Adjustment-Transmitter Only: Continuously Mounting: Wall, panel, or directly yoke or
adjustable with sensing element range diaphragm case of valve
Span Adjustment-Transmitter Only:
6 to 100% of sensing element range Options
Ambient Operating Temperature Range:
ᔢ Compliance with NACE MR-0175 with
Standard: -10 to 160°F (-40 to 71°C)
diaphragm seals to isolate sensing element
High Temperature: 0 to 220°F
(-18 to 104°C) ᔢ Norriseal Instrument Air Regulator
Typical Ambient Temperature Operating Effect:
Proportional Control Only: Output pressure
changes + _ 3.0% of sensing element rating for each
Materials
COnSTRuCTiOn MATeRiALS
PART MATERIAL
Bourdon Tube 316 Stainless Steel or K-Monel - NACE (Optional)
Control Tubing
In Contact with Process 316 Stainless Steel
(Pressure Block to Sensing Element)
Pressure Block 316 Stainless Steel
Other Internal Tubing Polyurethane Tubing or 316 Stainless Steel (Optional)
Relay Seat 316 Stainless Steel
Model 4950
Proportional Only Controller
SUPPLY GAUGE OUTPUT GAUGE
Model 4960
Proportional Plus Reset Controller
PROPORTIONAL BAND
ADJUSTMENT KNOB
NOZZLE
(DIRECT ACTING
SHOWN)
4950 D 100 — A — OS
eLeMenT RAnge (BOuRDOn TuBe)
Psig Code
0 – 30 003
PReSSuRe gAuge MATeRiAL
0 – 60 006 Code Type
0 – 100 010 – Bronze
0 – 150 015 D Bronze Liquid Filled
0 – 200 020 G SST Liquid Filled
0 – 300 030 S SST
0 – 600* 060
0 – 1000* 100
0 – 1500* 150
0 – 3000 300
0 – 5000 500
0 – 8000 800
0 – 10,000 10K
*For NACE, Bourdon Tube Ranges 0-600, 0-1000, and 0-1500 become K-Monel.
All other ranges require a diaphragm seal.
1. Normal operating pressure. If this pressure is exceeded, control and stability may be impaired
2. If this pressure is exceeded, internal part damage may occur
3. SCFH of Air at 60° F and 14.7 psig
Pressure Ranges 5
Mounting Options
2.50 2.50
7.26
3.12
3.62 3.62
2.00 2.69
PIPESTAND MOUNTING 11.12
R 1.00 Typ
4.37
8.94
6.12 0.34 Typ
9.62 4.00
Engineered Performance
11122 West Little York • Houston, Texas 77041
Tel: 713·466·3552 • Fax: 713·896·7386
www.norriseal.com
Due to the continuous improvement program at Norriseal, specifications and/or prices are subject to change without notice or obligation.
All other trademarks contained herein are the property of their respective owners.
© 2011 Norriseal, A Dover Company
4900-0811T