2 Which are the most commonly used inspection types.
3 How to make result recording mandatory before the UD 4 What is the user of QM control key & how it is defined 5 In In-process inspection, inspection plan is mandatory or not? 6 What settings required to do the inspection with handling units 7 What is the differeence between Qualitative & quantitative MIC 8 Which inspection types are used for integration between the QM & EWM 9 What is Dynamic Modification Rule , use of DMR & where we maintain the DMR 10 What is Quality Info Record & use of quality info record If same material is buying from 2 vendors, then for 1 vendor inspection lot should be created & for 11 another one material directly posed to Unrestricted How we can achieved above scenario? 12 how to link MIC to class & characteristics 13 How to do the stock posting automatically. 14 What is sample drawing procedure 15 What is inspection points along with types of inspection points 16 What is physical sample & types of physical samples along with examples 17 What is COA & configuration required to configure the COA 18 How to copy inspection lot results from the previous lot results 19 In inspection plan we have maintained 4 charactristics & we have to print only 1 charactristics in the certificate.What settings required to configure the above scenario 20 What is source inspection & Recurring inspection 21 What are the different types of quality notifications? 22 How to trigger follow-up-actions while processing the quality notifications 23 which inspection type we can use for integration between QM & PM 24 Can we reversed UD? If yes then how can we reversed UD 25 I want to create inspection lot against each line item then how can we achieve this I want to create inspection lot against the document against the by -product & co-product.Then how 26 can we create the same 27 Can we control Quality management on storage location level? If yes then How? 28 Which movements types are posted against the Quality to UR & Quality to blocked 29 What is inspection method & use of inspection method 30 What is sampling scheme ?