Professional Documents
Culture Documents
4 Asphalt
4 Asphalt
Marshall Stability 4
DURHAM GEO SLOPE INDICATOR
ASPHALT TESTING
Marshall Load Frame
CONTENTS
The AM-100 Marshall
Load Frame, with a load
Marshall Stability 95 - 98
capacity of 10,000 lbf
Specific Gravity 99 - 103 (45 kN), applies load to
cylindrical asphalt test
Asphalt Extraction 103 -106
specimens mounted in a
Ovens 117 - 122 thick-walled stability test
mold (breaking head).
Asphalt Ignition Ovens 103
The sturdy, steel frame
Water Baths 98 construction gives sup-
port to the drive motor,
Scales & Balances 117 - 121
strain rods and crossbar
Particle Size 56 - 64 member. The strain rate
is fixed at 2-in/min. The
AM-100 features directional
MARSHALL STABILITY switches with indicator
lights to show when the AM-100 Marshall Load Frame*
unit is in operation and
Marshall Stability when the platen reaches its limit. Microswitches control a sys-
tem shut-down for drive system protection at platen up/down
Breaking Head limit.
ASTM D 1159, D 5581 *Shown with optional AM-114 Breaking Head, AM-112 Flow Meter, E-405
AASHTO T 245 Digital Indicator, E-214 Load Cell
ASTM D 1559
Specifications for Marshall Load Frame
For use with AM-114 Marshall Stability Capacity: 10,000 lbf (45 kN)
Breaking Head. Measures up to 1 in of Platen Speed: 2 in (5.1 cm)/min
plastic flow of samples undergoing Mar-
Platen Travel: 3 in (7.6 cm)
shall testing. Utilizes maximum position
Cross head Travel: 5 in (12.7 cm)
brake assembly. Comes complete with
mounting collar that fits either guide rod Clearance between rods: 11.75 in (30 cm)
of test mold. Max. Vertical Clearance: 19 in (48.5 cm)
Asphalt Flow Indica-
tor, AM-112 Overall Dimensions WxDxH): 19 x 14 x 34 in (48.3 x 35.5 x 86.4 cm)
Electric Motor: 110 V, 60 Hz
AM-112 Asphalt Flow Indicator 4.0 lb
Used for preparing specimens for Mar- AM-156 Marshall Compaction Mold Holder for 4-in samples 7.0 lb
shall testing. Consists of base plate, form- AM-158 Wooden Compaction Pedestal 90.0 lb
ing mold and collar. Interchangeable base
AM-159 Marshall Compaction Hammer Holder 5.0 lb
plate and collar can be used on either end
of compaction mold.
Machined from seamless tubing and Marshall Compaction Hammer
Marshall Compaction ASTM D 1559
plated for rust resistance. Mold
AM-154 Marshall Stability Compaction Mold 4 in (10.2 cm) I.D. 10.0 lb Manual Compaction
AM-155 Marshall Stability Compaction Mold, 6 in (1.2 cm) I.D. 14.0 lb Hammer prepares
AM-13115 Marshall Stability Compaction Mold, for AM-131 samples for Marshall
Double Hammer w/ rotating base testing. Includes
Replacement Parts: handle, rod, sliding Marshall Compaction Hammer,
weight rammer and Model AM-152
AM-15420 Mold Only 4 in (101.6 mm) I.D.
4-in diameter foot.
AM-15520 Mold Only 6 in (152.3 mm) I.D.
Note: C-354 Slump Cone Funnel can be used with 4 in Marshall Mold
AM-152 Marshall Compaction Hammer, 4 in 20.0 lb
GO-233 Budget Water Bath 115V, 50/60 Hz, 1320 watts 35.0 lb
Accessory
GO-23399 Grid for Economy Water Bath, Stainless Steel
Hot Plate, Model GO-237 Hot Plate, Model GO-236
Water
Vacuum Source
Paving Mixture Sample 3 x 1,000cc Filter Flasks For Water Vapor Trap
Pressure Manometers
ASTM D 2041
AASHTO T-209
Orbital Shaker,
Model A-514,
shown in use
with optional flask
Rice Test Vibrator, holder and flasks.
Model A-51503, shown
with optional mounting
plate, A-51503
G-405
G-400
Vacuum Pumps
Models G-400 and G-405 are belt-drive, two stage Vacuum
Pumps designed for laboratory distillation, filtration, degassing,
vacuum deposition and as roughing pumps in high vacuum
systems. The relatively low pump operating speeds and large
oil reservoirs ensure long and trouble-free operation.
These pumps are mounted on rectangular steel base plates
and have V-belts and guards. They are supplied with a quart
of oil.
Model G-405 is fitted with a gas ballast which consists of a G-402
valve that allows a controlled portion of air to be bled into the
pump exhaust stage. This permits rapid purging of entrained G-400 Vacuum Pump Ass'y, 44 lb
water vapor in the pump oil. This allows totally closed op- 115 V, 60 Hz, 1 phase, 1/4 hp (*)
eration to achieve maximum vacuum.
G-405 Vacuum Pump Ass'y, 110 lb
115 V, 60 Hz, 1 phase, 1/2 hp (*)
Specifications for G-400 G-405 G-402 G-402 Direct Drive Vacuum Pump, 110 V, 60 Hz (*) 28 lb
Vacuum Capacity: 3 x 10-4 Torr 1 x 10-4 Torr 1 x 10-4 Torr G-40210 Direct Drive Vacuum Pump, 230 V, 50 Hz 28 lb
Free Air Capacity: 0.35 cfm 2.8 cfm 3 cfm (*) Other voltages available
Operating Speed: 350 rpm 525 rpm 1725 rpm G-40020 Vacuum Pump Oil (1 US Gal)
Inlet Fitting: 3/8 NPT 7/8 NPT 1/4 Barb G-40030 Vacuum Regulator, gauge, and filter ass'y
Oil Capacity: 1 qt 1-1/2 qt 26.4 oz G-40050 Flushing Oil (1 US Gal)
Length: 18-1/2 in 17-1/4 in 15-1/2 in G-409 Vacuum Bleed Valve
Width: 10 i n 11-1/2 in 6-1/2 in G-40911 Tubing, Vacuum, 1/4" ID X 1/2" OD (per foot)
Height: 10-3/4 in 13 i n 11-1/4 in G-40410 Tubing, Vacuum, 3/8" ID x 1/4" wall (per foot)
G-39620 Vacuum Water Trap Kit
Moisture Absorbent (Desiccant) Model G-435 provides in-line drying of gas or air at pres-
sures up to 90 psig. Unit is a plastic canister with ¼-in
Model G-430 is a blue desiccant material that turns pink NPT fitting near the top and bottom. Canister is 2-5/8-in
when spent. User can replace or revive the granular (67 mm) diameter by 11-3/8-in (289 mm) long.
material by drying at 200°C for one hour. Packaged with a
net weight of 5-lbs (2.3 kg) in jar with screw cap.
G-430 Desiccant, 5-lb container 5.0 lb
G-435 Desiccant Canister, 90 psig max 5.0 lb
Centrifuge Extractors
Model Type Capacity Description
A-250 Motorized 1500 g 17 x 17-1/2 x 18 in H, 110 V (ac) 50/60 Hz, 1 ph. Includes a positive speed adjustment
(0-3600 rpm). Ship. Wt.: 75 lb (34 kg). Ship. Vol.: 5 ft3 (0.14 m3)
A-25010 Motorized 1500 g Same as A-250 except with 220 V (ac) , 50/60 Hz, 1 ph.
A-255 Motorized 1500 g Same as A-250 except with explosion-proof motor.
Explosion-proof
A-25510 Motorized Same as A-255 except with 220 V (ac) , 50/60 Hz, 1 ph.
Explosion-proof
A-260 Motorized 3000 g 18 x 18 x 19 in H, 110 V (ac) 50/60 Hz, 1 ph. Includes a positive speed adjustment
(0-3600 rpm). Ship. Wt.: 76 lb (34.5 kg). Ship. Vol.: 6 ft3 (0.17 m3)
A-26010 Motorized 3000 g Same as A-260 except with 220 V (ac) , 50/60 Hz, 1 ph.
A-265 Motorized 3000 g Same as A-260 except with explosion-proof motor.
Explosion-proof
A-26510 Motorized 3000 g Same as A-265 except with 220 V (ac) , 50/60 Hz, 1 ph.
Explosion-proof
A-270 Hand-driven 1500 g 13-1/2 x 13-1/2 x 17 in H. With machine-cut bronze gears, running in oil, and with ball bearings.
Ship. Wt.: 65 lb (29.5 kg). Ship. Vol.: 3.5 ft3 (0.1 m3)
Accessories
Replacement Bow ls. Extra bowls permit faster testing of larger samples. Aluminum Bowls, covers, steel nuts.
Models: A-250, A-25010 A-260, A-26010 A-270
A-255, A-25510 A-265, A-26510
Bowl A-256 A-266 A-272
Cover for Bowl A-257 A-267 A-273
Cover Nut A-258 A-258 A-258
Extraction Filter Rings. 100 per package. Ship. Wt.: 4 lb.
Filter Rings (100/pck) A-251 A-261 A-271
Other
GO-228 Laboratory Box Furnace. 120 V (ac), 50/60 Hz, 1025 W . See OVENS section of this catalog for more choices.