Professional Documents
Culture Documents
Session Plan-2(MO1-LO2)
1
Unit of Competency: Care for Network and Computer Hardware
Module Title: Caring for Network and Computer Hardware
LO_2: Establish location requirements for hardware and peripherals
Session Objectives: At the end of each session the trainees would be able to:-
Determine and apply suitable environmental conditions for
hardware and peripherals
Consider general orientation and proper functioning of
different computer platforms in locating computer
Determine and apply system protection devices to keep
Hardware form damage.
Determine requirements and apply when moving hardware.
Determine and apply Suitable storage principles for
Hardware and associated peripherals and media.
Consider and apply Business requirements in respect of
hardware location
Consider functions of computer hardware and associated
OHS standards and environmental concerns.
Activities Nominal
Duration Contents Learning methods
Introduction 15 mins Introduction to the module Orientation
20 mins Computer plat forms Individual Learning
Session Plan-3(MO1-LO3)
2
Unit of Competency: Care for Network and Computer Hardware
Module Title: Caring for Network and Computer Hardware
LO_3: Monitor threats to the network
Session Objectives: At the end of each session the trainees would be able to:-
Use third-party software or utilities to evaluate and
report on system security
Review logs and audit reports to identify security
threats
Carry-out spot checks and other security strategies
to ensure that procedures are being followed
Investigate and implement inbuilt or additional en-
cryption facilities
Prepare and present an audit report and recommen-
dations to appropriate person
Obtain approval for recommended changes to be
made
Activities Nominal
Duration Contents Learning methods
Introduction 15 mins Introduction to the module Orientation
20 mins Using software utilities Individual Learning
Session Plan-4(MO1-LO4)
3
Unit of Competency: Care for Network and Computer Hardware
Module Title: Caring for Network and Computer Hardware
LO_4: Establish maintenance practices
Session Objectives: At the end of this session the learners shall be able to :-
Determine maintenance requirements specified by the
Equipment manufacturer.
Produce maintenance schedules including removal of dust
and grease build –up.
Perform diagnostic functions including replacing suspect
Components with other serviceable components and reload-
ing of associated software.
Configure software security settings to prevent destructive
software from infecting the computer.
Determine unserviceable components whether replaceable
through warranty, replacement or upgrade
Perform diagnostic functions using the operating system
and third-party diagnostic tools for recommended changes
to be made..
Activities Nominal Learning
Duration Contents
methods
Introduction 15 mins Introduction to the module Orientation
30 mins Determining maintenance requirements of Individual
equipment specification Learning
20 mins Scheduling maintenance procedures Individual
Learning
50 mins Diagnostic functions Individual
Learning
40 mins Configuring security setting Individual
Learning
20 mins Determine unserviceable components