Professional Documents
Culture Documents
Armitron ®
WATCH INSTRUCTIONS
M505, 40/6747BLK, 40/6749GRN, 40/6769BLU
28 J. 8- 28
Seconds flash. Press ‘C’ to zero out
WATE R 16 5 R E
SIS
EL
Armitron
SETTING THE TIME AND CALENDAR COUNTDOWN TIMER
A WEEK C
AD 1. From Time Telling Mode, 1. From Time Telling Mode, press ‘B’ three times to enter
T
I2
SE
SA
J.
SA I2
CHRONO
PM 8 :4 5 0 0
8:45 00 to zero out the Seconds. 2. Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.
PM
MO
EL
B D
DE
WR165 NOTE: Zeroing out 30 or more seconds automatically 3. Press ‘B’. Minutes flash. Press ‘C’ to advance the
adds one minute to time. Minute.
SA I2
2. Press ‘B’. Hours flash. Press ‘C’ to 4. Press ‘B’. Seconds flash. Press ‘C’ to advance the
advance the Hour. Second.
FEATURES PM
8 :4 5 0 0 NOTE: Pressing and holding ‘C’ will 5. When the Countdown Time is set, press ‘A’ to end set
• Time Telling Mode (Hours, Minutes, Seconds, Date, advance digits rapidly. sequence and return to Timer Mode.
• and Day of the Week) When 12 Hour Format is selected, ‘PM’ indicates ‘p.m.’ 6. Press ‘C’ to start the Countdown Timer.
• Calendar Mode (Month and Date) times; there is no indicator for ‘a.m.’ times. 7. If desired, press ‘C’ again to stop the Countdown
• 24 Hour Alarm SA I 2
3. Press ‘B’. Minutes flash. Press ‘C’ Timer. Press ‘C’ again to resume the Countdown Timer.
• Hourly Chime: One ‘Beep’ sound every full Hour to advance the Minutes. 8. If desired, press ‘A’ to reset the Countdown time to the
PM 4 5 00
8 :4 preset Countdown time. Press ‘A’ again, then press ‘C’ to
• Chronograph Mode: Hours, Minutes, Seconds and
• 1/100th of a Second with Lap Operation 4. Press ‘B’. Months flash. Press ‘C’ restart the Countdown Timer.
• Countdown Timer to advance the Month. NOTE: The Countdown timing will continue in any mode
4 I2 until ‘C’ is pressed. When the Timer counts down below
• Second Time Zone
• 12/24 Hour (Military Time) 5. Press ‘B’. Date flashes. Press ‘C’ to three minutes, an alarm (‘Beep Beep’) will sound when
• Water Resistant as indicated on the watch advance the Date. the Seconds Digit is ‘0’ or ‘30’. When the Timer counts
4 I2 down below ten seconds, an alarm (‘Beep’) will sound
• INSTALITE – Electro Luminescent Display
6. Press ‘B’. The Day of the Week flashes. Press ‘C’ to every second. When the Timer has expired, the alarm
advance the Day of the Week. (‘Beep Beep Beep’) will sound for ten seconds or until
SELECTING FEATURES
7. Press ‘A’ to end set sequence and return to Time ‘A’, ‘B’ or ‘C’ is pressed.
SA I2 1. Time Telling Mode displays Hour, Telling Mode. 9. Press ‘C’ to stop the Timer.
Minutes, Seconds, Date, and Day 10. Press ‘B’ to return to Time Telling Mode.
PM 8 :45 00 of the Week. CHRONOGRAPH
2. From Time Telling Mode, press WATER RESISTANCE
and hold ‘C’. Calendar Mode 1. From Time Telling Mode, press ‘B’ once to enter the
4 I2 appears and the Month and Date Chronograph Mode. This is a WATER RESISTANT watch. Do not operate the
are displayed. Release ‘C’ to 2. Press ‘C’ to start timing. push buttons below the surface of the water. Should water
return to Time Telling Mode. 3. Press ‘C’ again to stop timing. or condensation appear in the watch, immediately have
3. From Time Telling Mode, press ‘B’ 4. Press ‘A’ to reset to zero. the watch checked. Water can corrode electronic parts
SP 5. Press ‘B’ to return to Time Telling Mode. inside the case.
once. Chronograph Mode appears.
PM 8 :45 00 Press ‘B’ four times to return to LAP OPERATION
Time Telling Mode. 1. While in the Chronograph Mode, press ‘C’ to start CHANGING THE BATTERY
AL 4. From Time Telling Mode, press ‘B’ timing. Change the battery when the watch becomes slow, the
twice. Alarm Mode appears. 2. Press ‘A’ to measure Laps. readout darkens or does not appear, or the backlight
I 2:0 0 t I Press ‘B’ three times to return to 3. Press ‘C’ to stop timing at the end of the event. fails. Before removing the old battery, be sure to denote
Time Telling Mode. 4. Press ‘A’ to reveal the final Lap time. its polarity so that the new battery is installed in exactly
TR 5. From Time Telling Mode, press ‘B’ 5. Press ‘A’ again to reset to zero. the same way. Replace with one (1) CR2016 or equivalent
three times. Timer Mode appears. 6. Press ‘B’ to return to Time Telling Mode. only. This watch contains precise electronic components
0 :00 00 Press ‘B’ twice to return to Time and should only be opened by a qualified watch
Telling Mode. SETTING 24 HOUR ALARM technician. However, it is not necessary to return your
T2 6. From Time Telling Mode, press ‘B’ watch to the manufacturer for battery replacement. It is
four times. Second Time Zone 1. From Time Telling Mode, press ‘B’ twice to enter the
PM 2 : 4 5 0 0 Alarm Mode. recommended that you bring your timepiece to a local
Mode appears. Press ‘B’ once to jeweler.
return to Time Telling Mode. 2. Press ‘A’. Alarm Hours flash. Press ‘C’ to advance the
Alarm Hour.
3. Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the
INSTALITE - NIGHT VISION DISPLAY Dear Customer:
Alarm Minute.
1. Press ‘D’ in any mode to illuminate the watch face. 4. Press ‘B’. Alarm Time Zone flashes. Press ‘C’ to select Help your watch/jewelry retailer protect our environment
The backlight will remain lit for 2 to 3 seconds. either Time Zone 1 or Time Zone 2. by properly recycling the button cell battery in your watch.
NOTE: EXCESSIVE USE OF THE BACKLIGHT WILL NOTE: The Alarm is available in one Time Zone only. Professional jewelers and watch retailers are best
SHORTEN BATTERY LIFE. 5. Press ‘A’ to end set sequence. equipped to replace the battery in your watch without
6. Press ‘B’ to return to Time Telling Mode. damage to the watch case and movement inside. They
have the specialized tools and experience to do the job
12/24 HOUR (MILITARY) TIME
right. Inexperienced people can scar the case and damage
1. From Time Telling Mode, press ‘A’. Press ‘B’ six times
ACTIVATING THE ALARM AND HOURLY CHIME
the water resistant seal – voiding your warranty.
to enter the 12/24 Hour (Military Time) Mode. Press ‘C’ to 1. While in Alarm Mode, press ‘C’ to activate the Alarm. It is important to recycle your watch battery in an
select either 12 Hour or 24 Hour (Military) Time. The Alarm symbol appears to indicate the Alarm will environmentally safe way. Watch batteries contain very
2. Press ‘A’ to end set sequence and return to Time sound at the preset Alarm Time for 20 seconds or until small amounts of mercury, which is required to prevent
Telling Mode. ‘A’, ‘B’ or ‘C’ is pressed. corrosion of the battery and damage to your watch. There
2. Press ‘C’ again to activate the Hourly Chime. is no danger to you or your watch from the mercury
SECOND TIME ZONE “CHIME” appears to indicate the Hourly Chime will sound because it is in the sealed battery. But you need to recycle
every hour on the hour. your watch battery properly. Your professional watch/
1. From Time Telling Mode, press ‘B’ four times to enter
3. Press ‘C’ again to deactivate the Alarm. jewelry retailer is the best person to do this for you. These
Second Time Zone Mode.
4. Press ‘C’ again to deactivate the Hourly Chime. professionals collect used batteries and recycle them
2. Press ‘A’. Hours flash. Press ‘C’ to advance the Hour.
5. Press ‘B’ to return to Time Telling Mode. through licensed waste management companies.
3. Press ‘B’. Minutes flash. Press ‘C’ to advance the
Do our environment and your watch a favor. Ask your
Minutes.
watch/jewelry professional to replace your battery when it
4. Press ‘A’ to end set sequence.
expires.
5. Press ‘B’ to return to Time Telling Mode.