Budget BSD4805 Cordless Screwdriver
Charging the battery
Connect the adapter plug to the socket on the device (Pos. 5 Fig. 1). Plug the charging
The lamp (Pos. 7 Fig. 2) turns on and the battery is charged. After approximately 5 hou
Observe the recommended times and do not leave the charger connected unnecessarily! If
Wait for it to cool down to temperature.
Attention
Before starting charging, check whether the voltage stated on the adapter's type plate
Check that it is equipped with plugs.
Plug the charging adapter into the socket installed in accordance with the relevant ins
Safety warnings and operating instructions for batteries and charging
Preventive maintenance of the battery in normal operation
Make sure the battery is fully charged during the first charge. The battery reaches ful
Fully charging the battery after use (discharging the battery by 50-78%) will not damag
do it. However, after 3-5 partial charges, you should fully discharge and charge the ba
If it is discharged and its power begins to decrease, it is fully discharged. Batteries
They ejaculate. Even if you do not use the tool for months, you should occasionally cha
Avoid short-term charging, such as using it without fully charging it. Use cordless ser
do not drop it. Do not subject it to impacts. Avoid leaving the battery connected to th
There is no hold function or “Stand-By” function. Unplug the charging adapter from the
Attention