Professional Documents
Culture Documents
Servicemanual Panasonic kv-s3065cl, kv-s3065cw s2
Servicemanual Panasonic kv-s3065cl, kv-s3065cw s2
TABLE OF CONTENTS
PAGE
1 TOPICS OF MAIN CHANGED CONTENTS---------------- 3
2 “SECTION 2 SPECIFICATIONS” ----------------------------- 4
3 “SECTION 4 INSTALLATION ---------------------------------- 6
3.1. “Section 4.7 System Requirements” ------------------ 6
4 “SECTION 9 SERVICE UTILITY & SELF TEST”--------- 7
4.1. “Section 9.1 Main menu indication for Service
Utility” --------------------------------------------------------- 7
4.2. “Section 9.2 Function item list of Service
Utility” --------------------------------------------------------- 8
4.3. “Section 9.3 Operation” ---------------------------------10
5 “SECTION 14 PARTS LOCATION AND MECHANI-
CAL PARTS LIST” -----------------------------------------------13
5.1. “Section 14.1 Exterior” ----------------------------------14
5.2. “Section 14.2 Board Box Unit and others” ---------16
5.3. “Section 14.3 Chassis and Base 1” ------------------18
5.4. “Section 14.4 Chassis and Base 2” ------------------19
5.5. “Section 14.5 Chassis and Base 3” ------------------20
5.6. “Section 14.6 Packing” ----------------------------------22
6 “SECTION 15 REPLACEMENT PARTS LIST” ----------23
6.1. “Section 15.4 CIS (F) RELAY Board”----------------24
6.2. “Section 15.5 CIS (B) RELAY Board”----------------24
3
2 “SECTION 2 SPECIFICATIONS”
Item Model No.
KV-S3065CL Series*1 KV-S3065CW Series*2
Scanner Scanning face Duplex
Scanning method CIS (Contact-type color Image Sensor): Front & Back sides
Scanning Width 227 mm (9.0 in.) 302 mm (11.9 in.)
Readout speed Black & White: 60 ppm/100 ipm (A4, 200 dpi, Portrait) 65 ppm/120 ipm (Letter, 200 dpi,
Portrait)
Color: 60 ppm/100 ipm (A4, 200 dpi, Portrait) 65 ppm/120 ipm (Letter, 200 dpi, Portrait)
Resolution Main scanning direction: 100 - 600 dpi (1 dpi step)
Sub-scanning direction: 100-600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image output Binary, Grayscale, Color, *5MultiStreamTM (Binary and Color, Binary and Grayscale)
Tonal gradation Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8bit), Color (24 bit)
Image control Image emphasis, Dynamic threshold, Automatic separation, Multi-Color dropout,
Mirror Image, Noise reduction
Other functions Patch code detection (Kodak patch 2,3,T, Control sheet), Double feed detection
Paper Size 48 x 70 mm (1.9 x 2.8 in.) to 48 x 70 mm (1.9 x 2.8 in.) to
297 x 431 mm (11.7 x 17 in.) 297 x 431 mm (11.7 x 17 in.)
Thickness 0.05 to 0.2 mm (2.0 to 5.9 mils)
Note: 1 mil = 1 / 1000 in.
Weight 40 to 157 g/m2 (10.7 to 41.9 lb.)
Note: 1 lb.= 3.75 g/m2
Detection Empty, Size, Jam, and Double-feed detection
Interface
SCSI (20 MB/s, 50 pins half type) or USB 2.0 (Connector type: B)
Hopper capacity Letter/A4 or less (Portrait): 300 sheets [64 g/m2 (17.1 lb.)]
Wider than Letter/A4 (Portrait): 200 sheets [64 g/m2 (17.1 lb.)]
Unit External dimensions 495 x 575 x 288 mm (19.5 x 22.7 x 11.4 in.)
(Width x Depth x Height) Note: When the ADF Door is open, height is 505 mm (19.9 in.).
Weight 24 kg (53 lbs.)
Power requirement AC100-120 V, 50 / 60 Hz*3
AC220-240 V, 50 / 60 Hz*4
Power Maximum 1.4 A *3
consumption (Scanning)
0.6 A *4
Minimum 0.6 A *3
(Standby)
0.3 A *4
Sleep mode *3 6.2 W or less
*4 6.2 W or less
Environment Operating temperature and Temperature: 15 °C to 30 °C (59 °F to 86 °F)
Humidity Humidity: 20 % to 80 %RH
Storage temperature and Temperature: 0 °C to 35 °C (32 °F to 95 °F)
Humidity Humidity: 10 % to 80 %RH
Accessories Installation manual, Maintenance manual, AC cord, USB cable, Blower, Cleaning paper,
Shading paper, CD [ISIS Driver, TWAIN Driver, Capture software (RTIV), Operation manual,
P.I.E. manual, RTIV manual, Control sheet images, User Utility, User Utility Manual]
PbF (Pb Free) Applied to PCB assemblies CONTROL, INTERFACE, PANEL, DRIVE, POWER, SIZE
DETECTOR, HOPPER HOME, RELAY (LOWER), SKEW (R), WAITING SENSOR,
STARTING SENSOR, ENDING (FRONT) SENSOR, RELAY (UPPER), PAPER JAM
SENSOR, ENDING (REAR) SENSOR, POINTER, POST IMPRINTER DOOR, POWER
RELAY, CIS (F) RELAY, CIS (B) RELAY Boards for KV-S3065CL Series and
KV-S3065CW Series
Note: Distinction of PbF PCB
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Option *6 Roller Exchange Kit (standard): KV-SS017
*6 Roller Exchange Kit (for thin paper): KV-SS018
*6
Roller Cleaning Paper (KV-SS03)
*6 Imprinter (KV-SS014)
*6 Ink Cartridge (KV-SS021)
4
Note:
*1
: KV-S3065CL Series
KV-S3065CL: For U.S.A.
KV-S3065CL-U: For Europe
KV-S3065CL-A: For Australia
KV-S3065CL-T: For Taiwan
SERIAL No. shown on the name plate on each scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for U.S.A. → 802 xxxx xxxx
2. SERIAL No. for Europe→ 803 xxxx xxxx
3. SERIAL No. for Australia → 804 xxxx xxxx
4. SERIAL No. for Taiwan → 805 xxxx xxxx
(x: Don’t care)
*2:
KV-S3065CW Series
KV-S3065CW: For U.S.A.
KV-S3065CW-U: For Europe
KV-S3065CW-A: For Australia
KV-S3065CW-T: For Taiwan
SERIAL No. shown on the name plate on each scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for U.S.A. → 747 xxxx xxxx
2. SERIAL No. for Europe→ 797 xxxx xxxx
3. SERIAL No. for Australia → 798 xxxx xxxx
4. SERIAL No. for Taiwan → 799 xxxx xxxx
(x: Don’t care)
*3:
Applied to KV-S3065CL/S3065CW (For U.S.A. and other countries where power supply (AC100 to AC120 V) is
applied except for Taiwan) and KV-S3065CL-T/S3065CW-T
*4:
Applied to KV-S3065CL-U/S3065CW-U (For Europe and other countries where power supply (AC220 to AC240 V) is
applied except for Australia and China), KV-S3065CL-A/S3065CW-A, and KV-S3065CLCN/S3065CWCN
*5:
MultiStream is TM of Pixel Translations (a division of Action point Inc.)
5
3 “SECTION 4 INSTALLATION
3.1. “Section 4.7 System Requirements”
When using the scanner, the required personal computer conditions are as follows.
Note 1:
1. This system requires 1 GB free space of HDD in the personal computer at least.
2. Color images larger than A3 size cannot be scanned at 600 dpi on Windows 98 or Windows Me.
A large color image may not be scanned in high resolution depending on a computer system or application.
3. The scanning speed differs depending on the personal computer’s operating environment or application.
4. Be sure to connect the scanner directly to the USB interface port on PC.
We cannot guarantee that the scanner will work properly if it is connected to a USB hub.
5. A daisy-chain connection to the SCSI interface may reduce the scanning speed.
6. When using Windows NT, be sure to install the ASPI layer software that the SCSI Board’s vender provides.
Note 2
• Windows® 98 is Microsoft® Windows® 98 operating system.
• Windows® Me is Microsoft® Windows® Me operating system.
• Windows NT® is Microsoft® Windows NT® operating system.
• Windows® 2000 is Microsoft® Windows® 2000 operating system.
• Windows® XP is Microsoft® Windows® XP operating system.
• Microsoft®, Windows® and Windows NT® are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• Pentium® is a registered trademark of Intel Corporation.
• Each company’s name or company product name is each company’s trademark or registered trademark.
6
4 “SECTION 9 SERVICE UTILITY & SELF TEST”
4.1. “Section 9.1 Main menu indication for Service Utility”
This section describes the functions of the service utility software, such as adjustments, diagnosis, configuration, and maintenance.
This utility software also includes a user utility function.
Executing “Service Utility.exe” (without installing the software to the PC except for ASPI Manager) will allow you to operate all the
functions found in this service utility software.
Note:
• This utility software is not included with the scanner.
Please call service or technical support to find out how to obtain the service utility software.
• This software should be used only by an authorized service technician.
Improper use of this software may cause damage to the scanner.
*Note:
• This is a main menu sample (Fig. 9.1) of the Service Utility software (Version 4.2).
• This software is the latest version at the time when this service manual is issued, but it is subject to change without
notice.
7
4.2. “Section 9.2 Function item list of Service Utility”
Service Utility item list is as follows.
Note:
When two or more scanners are connected to PC, execute “Select Scanner” to define the scanner before evaluating.
The procedure is as follows.
1. Click “Select Scanner” on the Main Menu.
2. Select the product number and interface of the scanner to evaluate.
8
Note:
*1: This item is available only when the optional Imprinter is installed to the scanner
“KV-S3065CL/S3065CW Series”.
*2: Firmware Version 1.10 or later will enable this function. (With the Version 1.00 or older,
clicking "Feed Speed"on the main menu causes an error message.)
Remarks
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diag.
(6) Maintenance
9
4.3. “Section 9.3 Operation”
This section describes each operation (or status indication), according to the function item list shown in Sec.9.2.
10
4.3.2. “Section 9.3.5 Scanner Condition”
11
4.3.3. “Section 9.3.7 Adjust”
Note:
*1
: Firmware Version 1.10 or later will enable this function. (With the Version 1.00 or older,
clicking "Feed Speed"on the main menu causes an error message.)
12
5 “SECTION 14 PARTS LOCATION AND MECHANICAL
PARTS LIST”
13
5.1. “Section 14.1 Exterior”
14
Replacement Mechanical Parts List (Exterior)
15
5.2. “Section 14.2 Board Box Unit and others”
16
Replacement Mechanical Parts List (Board Box Unit and others)
17
5.3. “Section 14.3 Chassis and Base 1”
18
Replacement Mechanical Parts List (Chassis and Base 1)
5.4. “Section 14.4 Chassis and Base 2”
Ref.No. Part No. Code Part Name & Description Remarks
Replacement Mechanical Parts List (Chassis and Base 2)
Original New
1 PBUEX0096X PBUEX0096W C Bottom Plate-Ass'y
31 PBMDX0463X PBMDX0463W C Retard Unit Plate Ass'y Ref.No. Part No. Code Part Name & Description Remarks
51 PBDGA0008Y PBDGA0008Y C Scanner Drive Gear Original New
65 PBHEA0116Z PBHEA0116Z C Sheet 11 L2CC0009-J PJAAC0014Y-J B Sensor Unit for KV-S3065CW Series
11 L2CC0013-J L2CC0018-J B Sensor Unit for KV-S3065CL Series
13 PPB747ADF23B PPB747AD23B1 C CIS (B) RELAY Board for KV-S3065CW Series (RTL) PbF
13 PPB802ADF23B PPB802AD23B1 C CIS (B) RELAY Board for KV-S3065CL Series (RTL) PbF
19
5.5. “Section 14.5 Chassis and Base 3”
20
Replacement Mechanical Parts List (Chassis and Base 3)
21
5.6. “Section 14.6 Packing”
Replacement Mechanical Parts List (Packing)
22
6 “SECTION 15 REPLACEMENT PARTS LIST”
23
6.1. “Section 15.4 CIS (F) RELAY Board” 6.2. “Section 15.5 CIS (B) RELAY Board”
24