[2019 |
SKILL TEST IN COMPUTER (PRACTICAL)
Time : 1 hour
Full Marks ; 50
The figures in the right-hand margin indicate marks.
Answer all questions.
4. Cteate a new PowerPoint presentation with the following slides by typing the texts
and instructions as mentioned against each stide : 10
Slide 1:APoem
Slide 2: Headline type: “Allittle madness in the Spring
Is wholesome even for the King.”
Click to Add text : Emily Dickenson
Slide 3:Type: Springis nature's way of saying, “Let's party !”
Click to Add text : Robin Williams
Insert anew slide. This should be Slide 4.
Click to Add Text and type three lines of text :
Crocus
Tulips
Daffodils
Format the three lines of text to be Right aligned
Format the bullets to be Check Marks
Format the fill and border of the Textbox
Select the Title on Slide 3:
Change the Text direction of the Title to'be Vertical
Rearrange the Text Boxes for the Title and the bulleted list to fit on the slide
Formatting instructions :
Format Slides
WX = 1/4 (Tum over)Format the Background on each slide to be each a different shade of blue.
Modify the font color to improve reading
Format the Background of the first slide to be a Fill Effect
Select all of the slides and add a Transition : dissolve
2. Using the data given, get the sum of all the figures within the range using
Excel Sheet: 10
A 8 ¢ D E F ¢
1 Mon Tue Wed Thur Fri TOTAL
2 Breakfast | 3,560 3,186 2,952 3,395, 3,436
3 Lunch 20,163 21416 19,912 19,681 18,628
4 Bar 9,873 12,172 12,642 12,714 18,846
5 ‘Snacks 2,405, 3,544 2,694 3,120 3,712
Ls TOTAL “i
3. Write down the following paragraph : 10
“Without a doubt, the Intemetis one of the most important inventions of mader times.
The Intemet is a global interconnected computer networks which allow each connected
computer to share and exchange information with each other. The origins of the intermet
can be traced to the creation of Advanced Research Projects Agency Network
(ARPANET) as a network of computers under the auspices of the U.S. Department of
Defense in 1969"
(Paragraph font-size and font-type must be 10 Verdana.
(ji) Paragraph alignment must be justified and double line spacing.
(iii) Drop Cap the first letter of ‘Without and it should drop 2 lines of the paragraph.
(iv) Highlight the “(ARPANET)' with green color.
(Make the “intomet” keywords Bold and Italic.
(vi) Insert any ‘WordArt and a symbol to your document,
(vii) Inserta clipart to your document.
(vil) Add following lines to your document:
(@) cpu
() Power Supply
Wists (2) Contd.(c) Mother Board
(d) RAM
(ix) Insert the following table into your document :
Name | Surname
Age
Gender
Job
4, Create a Microsoft Access Document : Computer System Sale Report.
10
For this database project, you will use Microsoft Access to create an inventory
database for a hardware store, which contains more than 10 records with the fields
listed below. In this project, you will : Design the Table Structure and Enter the Data
hypothetically.
DESIGN YOUR TABLE STRUCTURE with the foliowing field names :
Field Name | Data Type | Width Other Information
Primary Key - may contain alpha
Item ID Text 6 chae and numeric, the first character
must be a upper case letter. You
create this, do not use autonumber
Description Text 20 chars
Vendor ID Number Long Integer
List Price | Currency Leave decimal places as 2
‘On—Hand Qty | Number Long Integer
Codes must be validated, and
must be formatted in upper case.
a Text | 4 chars |: Codes are : SOFT, HARD, ELEC,
or OTHR. Default value is OTHR
| OnSale_ | Yes/No
WX -~ 1/4
(3)
(Tum over)Hints ;
Start Access and select “Blank Access Database.” Important : when prompted to
“Save in’, name your database file “Inventory.” Then click on Create. Don’t try to go
any further until this is done |
In the main database window, the Table button should be selected (embedded).
Double-click on Create Table in Design View to set up the structure of your database.
file. The cursor will be at the 1st fleld, (note : you will create the Table in Design View,
not using a Wizard or in Datasheet View).
When the Table Design Screen is displayed, being by typing in the first field name and
then tab over to Data Type. Choose the field type from the arrow options (or you can
just type the first letter of the type). Remember that Access uses “text,” “number,” “yes/
no,” for what our book calls “character,” “numeric,” and “logical.”
Atthis point, you'll see a General tab in the lower left corner of the screen, with many
options, including field size. You must set up ail field specifications here, as we did in
class. After you have entered all the fields described in the table on Page 1 above,
make the Item ID to be the primary key, using the key icon, as described in class. As.
you enter data in Section 2 betow, using Datasheet View, you will have to be careful
to insure that you do not have any duplicate Item IDs. When finished, save file.
5. (a) Display this PC's IP Address, DNS Server, and Default Gateway.
(b) Save the answers of all questions into a new folder with a name of your Roll number.
10
—_ ¥ ———_
WA — 1/4 (1,100) (4) Skill Test in Computer (Practical)