Page 2 DIN 19062 Part 2
2 shapes, dimensions
For the dimensions of machined workpiece surfaces without tolerance information, the general tolerances for the medium
‘accuracy level according to DIN 7168 Part 1 and the S accuracy level according ta DIN 7168 Part 2 apaly.
Principles for calculating rope pulleys according to DIN 15020 Part 1
Form A pulley with cylindrical roller bearing and inner bushing
Form B pulley with deep groove ball bearing and inner bushing
Form C pulley with deep groove bal besrng without inner bushing
Form D pulley with pin bearing; Trust washers according to DIN 15069
Ie
Sih:
| i
1) Axle distance bushing length be2DS-5 for more than one pulley next to each other on one axle
2) Dimension b3 le given without play. For the installation of rope pulleys of all shapes, an axial play of atleast 1 mm
Per side must be providad in the connecting stucture.
3) The tolerance field h9 applies to axis diameter ds.