Professional Documents
Culture Documents
Zenknit - Toys - DINO QUIET BOOK
Zenknit - Toys - DINO QUIET BOOK
Website: zenknit.ru/en
Instagram: @zenknit_toys
Facebook: zenknit
email: info@zenknit.ru
1
CONTENTS
Print version:
https://drive.google.com/file/d/1cjdSfoyIZZS5yHsjkX0QVfWSPGyXZaiI/view?usp=sharing
Please do not reproduce, distribute, translate, sell or change the pattern and images in any way.
It’s prohibited. However, feel free to sell the finished products/toys.
2
Gauge*:
for pages with hook 3 mm: 10х10 cm = 26 stitches x 30 rows
with hook 2 mm in spiral rounds: 10х10 cm = 34 stitches x 34 rounds
* In this project, the gauge is not important, I indicate my gauge only for an example.
If your gauge is different, then the book will turn out bigger or smaller than mine.
3
Abbreviations
● MR — magic ring
● sc — single crochet stitch
● hdc — half double crochet
● dc — double crochet
● inc — increase — 2 sc in one stitch of the previous round
● dec — invisible decrease (when crocheting in a spiral rounds) — crochet 1 sc on 2
front loops (how to crochet https://youtu.be/lvbcmz-irCM)
● dec — sc decrease (when crocheting in a turning rows) — single crochet 2 together
(how to crochet https://youtu.be/hOINjJ-MRmU)
● ch — chain stitch
● slst — slip stitch
● (...)*n — repeat instruction in brackets n times
● R – row/round
● ws – wrong side
● rs – right side
● BLO — crochet stitches back loops only
● FLO — crochet stitches front loops only
Recommendations (notes)
● All pieces, unless otherwise indicated, are crocheted in spiral rounds (without
joining, NO slip stitch, NO chain 1) or in turning rows.
● When crocheting pieces in a spiral round, in most cases, decreases and increases
should be located on the sides of the pieces. If necessary, you can move the place
of increases/decreases forward or backward.
● You can put rustling elements in dinosaurs (can be made from a baking sleeve, use
6-8 layers). In some pieces, you can put squeakers, rattles or sew magnets
(optional).
● Please sew on all small parts VERY tightly.
● The toy must meet the safety requirements defined in toy safety standards:
○ Toys for children under 36 months old should not have small parts (a small
part is any object that fits completely into a specially designed test cylinder
57.1 mm long by 31.7 mm).
○ Cords shall have a length less than 220 mm (if toys are intended for children
under 18 months) or less than 300 mm (for children under 36 months). The
laces do not form a movable or fixed loop, the perimeter of which is more
than 360 mm.
● Sometimes you need to crochet front loop (FLO) or back loop (BLO) only:
4
Crocheting description
TRICERATOPS
Nasal horn
Crochet with the beige color yarn, hook 2 mm.
R1: 6 sc in MR.
R2: inc, 5 sc = 7.
R3: 4 sc, inc, BLO 2 sc = 8.
R4: 1 sc, inc, 6 sc = 9.
R5: 6 sc, inc, 2 sc = 10.
R6: 2 sc, inc, 7 sc = 11.
R7: 7 sc, inc, 3 sc = 12.
R8: 9 sc (3 sc don’t crochet, the current loop should be on the side of the piece).
R9: fold the piece in half and crochet 4 joining sc through both layers, 1 sc through both
layers (see the video or description below). Do not stuff the piece.
Fasten off and cut the yarn. Hide the ends of the yarn
inside the nasal horn.
Fold the piece in half and insert the hook through two layers of the piece. Grab the yarn and pull it through only
one layer of the piece.
Grab the yarn again and pull through all the loops on the hook and the piece layer.
5
Triceratops Head
Crochet with the green color yarn, hook 2 mm.
Make 20 ch.
R1: begin from the second loop from the hook: 18 sc, 4 sc in the last one loop,
17 sc on the back of the chain, 3 sc in one starting loop = 42.
R2: (19 sc, 2 inc)*2 = 46.
R3: 2 sc, BLO 6 sc, 1 sc, BLO 8 sc, 3 sc, 2 inc, 21 sc, 2 inc, 1 sc = 50.
R4: 21 sc, 2 inc, 23 sc, 2 inc, 2 sc = 54.
R5: 22 sc, 2 inc, 25 sc, 2 inc, 3 sc = 58.
R6-8: 58 sc (3 rounds).
R9: 36 sc, crochet the nasal horn to the head with 5 sc, 17 sc = 58 (see note).
Note: the nasal horn should be crocheted in the middle, on the front side of the head. If
necessary, then move the beginning of crocheting the nasal horn to the head.
36 sc are crocheted, countdown 5 sc insert the hook into the nasal horn loop grab the yarn and pull it through
and make sure that the nasal horn (from the wrong side to the front), and two layers (there are two loops
will be crocheted in the middle then into the loop on the head
on the hook)
grab the yarn again and pull it the nasal horn is crocheted to the head
through all the loops on the hook
R10-11: 58 sc (2 rounds).
R12: 23 sc, 2 dec, 25 sc, 2 dec, 2 sc = 54.
R13: 23 sc, dec, 25 sc, dec, 2 sc = 52.
R14-15: 52 sc (2 rounds).
6
R16: 36 sc, crochet the nasal horn to
the head with 2 sc, 14 sc = 52. See the
video on page 6 (time 2:05) or photos
on the right.
R17-20: 52 sc (4 rounds).
Turn the head inside out and tie all the threads together.
Optional: sew magnets on the wrong side, in the place where the eyes and blush are
embroidered (see the video below or photos on the next page).
7
How to sew magnets (duplicates video):
3. Sew the PVC cover to the head: on the head, grab only the top layer of the stitch,
without bringing the thread to the front side.
4. After sewing, tie the ends of the thread together several times and cut off the
excess length.
5. Repeat for the second magnet.
Turn out the part on the front side and continue crocheting:
Note: in R21-24, the decreases should be on the sides. If necessary, move the place of
decrease back or forward.
8
Optional: put a squeaker or a rustling element inside the head.
from the baking sleeve, cut a piece about two fold the edges to the center, as shown in the photo
lengths wide of the triceratops' head
fold the resulting strip 4-5 times, as shown in the photo place this element inside the head
Fasten off and cut the yarn. Hide the ends of the yarn inside the head.
9
Side horns (make 2)
Crochet with the beige color yarn, hook 2 mm.
R1: 6 sc in MR.
R2: inc, 5 sc = 7.
R3: 3 sc, inc, 3 sc = 8
R4: fold the piece in half and crochet 4 sc through both layers.
Fasten off and cut the yarn, leaving the long end for sewing
(~25-30 cm).
Sew the horns on the head, as shown in the photo and video.
Paws (make 2)
Crochet with the green color yarn, hook 2 mm.
Make 8 ch.
R1: begin from the second loop from the hook: 6 sc, 3 sc in the last one loop,
5 sc on the back of the chain, inc in one starting loop = 16.
R2: (7 sc, 3 sc in one stitch)*2 = 20.
R3: 8 sc, inc, 9 sc, inc, 1 sc = 22.
R4-7: 22 sc (4 rounds).
R8: (9 sc, dec)*2 = 20.
R9: 20 sc.
Optional: Turn the piece inside out and fold it in half. Sew on the magnet on the first 10
stitches of the round. Turn out the piece on the front side and check whether the magnet is
sewn correctly.
R10-11: 20 sc (2 rounds).
R12: (dec, 8 sc)*2 = 18.
R13-15: 18 sc (3 rounds).
10
Crochet 1 sc to move the beginning of the round to the side of the piece (if necessary,
crochet more sc).
R16: fold the piece in half and crochet 8 sc through both layers.
11
Collar
Crochet with the green color yarn, hook 3 mm.
Make 6 ch.
R1: begin from the second loop from the hook: 4 sc, 4 sc in the last one loop,
3 sc on the back of the chain, 3 sc in one starting loop = 14.
R2: inc, 3 sc, inc, 2 sc, inc, 3 sc, inc, 2 sc = 18.
R3: 2 sc, 3 sc in one stitch, (2 sc, inc)*5 = 25.
R4: 3 sc, inc, 4 sc, 3 sc in one stitch, (3 sc, inc)*4 = 32.
R5: 3 sc, 3 sc in one stitch, 6 sc, inc, (4 sc, inc)*4, 1 sc = 39.
R6: 4 sc, inc, 8 sc, 3 sc in one stitch, (5 sc, inc)*4, 1 sc = 46.
R7: 4 sc, 3 sc in one stitch, 10 sc, inc, (6 sc, inc)*2, FLO 6 sc, inc, 6 sc, inc, 2 sc = 53.
R8: 5 sc, inc, 12 sc, 3 sc in one stitch, (7 sc, inc)*4, 2 sc = 60.
R9: 5 sc, 3 sc in one stitch, 14 sc, inc, (8 sc, inc)*4, 3 sc = 67.
R10: 6 sc, inc, 16 sc, 3 sc in one stitch, (9 sc, inc)*4, 3 sc = 74.
R11: 2 sc, crochet the paw to the collar with (4 sc, 3 sc in one stitch, 3 sc) see the detailed
description and video below, FLO 12 sc, crochet the second paw to the collar with (3 sc,
inc, 4 sc), 6 sc, inc, (10 sc, inc)*3, 4 sc = 81.
Align the wrong side of the collar with the wrong side of the paw. Crochet together the
collar (both loops) and the paw (back loops only).
not crocheted front loops there are on the wrong side of paw
R12: 7 sc, inc, 20 sc, 3 sc in one stitch, (11 sc, inc)*4, 4 sc = 88.
R13: 7 sc, 3 sc in one stitch, 22 sc, inc, (12 sc, inc)*4, 5 sc = 95.
R14: 8 sc, inc, 5 sc, crochet back loops of the head to the collar with 14 sc, 5 sc,
12
3 sc in one stitch, (13 sc, inc)*4, 5 sc = 102.
Video: how to make invisible fasten off and hide the ends of the yarn
Scan QR or visit
https://youtu.be/XmIPUdUqHbo
With a separate piece of green yarn using slip stitches, attach the upper part of the head on
the collar. On the collar, insert the hook between R7 and R8 (from the wrong side to the
right side). On the head insert the hook under the loops of the last row, stepping back from
the side horn 6 stitches. See the video below and description on the next page.
13
How to attach the head on the collar (duplicates video):
on the collar, insert the hook insert the hook into the next stitch grab and pull the yarn through the
between R7 and R8 (from the on the collar, and then into the stitch on the head and through the
stitch on the last row of the head, collar
wrong side to the front side) into
stepping back from the side horn
the increase of the central wedge. 6 stitches
Grab and pull the yarn.
immediately pull the yarn through crochet 6 more slip stitches. Cut the yarn.
the loop on the hook
Pull the ends of the yarn to the wrong side.
Hide all the yarn ends on the wrong side, except the yarn ends on the paws.
14
COVER PAGE
Crochet with the beige color yarn, hook 3 mm.
Make 35 ch.
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn (see the photo or video below).
R1 is crocheted
Note: if you would like the triceratops to be located in the center of the page (without a
title, see the second photo below), then crochet the triceratops to the cover in R11 and R25
instead of R7 and R21, in the same way as shown on the next page.
the triceratops is crocheted to the cover in R7 and R21 the triceratops is crocheted to the cover in R11 and R25
(basic description) (note)
15
R7: 11 sc, crochet the triceratops’ collar to the cover 12 sc (lower part), 11 sc, ch, turn.
Video: how to crochet the triceratops to the cover (R7 and R21).
Scan QR or visit
https://youtu.be/lhNLjrjXXBk
Note: here it may seem that the crocheted rows are not enough for crocheting the dino to
the cover (left photo below), but this is necessary so that the place of attachment of the
head to the collar looks better from the front side.
Without cutting the yarn, crochet a row of 38 slst along the side of the page (see the video
above). Cut the yarn and fasten off.
Crochet a row of 38 slst on the opposite side, starting from the first row (from the tail of
the starting chain). Do not cut the yarn.
Make ch, crochet on the R38: 33 sc, inc,
38 sc in stst.
Crochet on the R1: inc, 32 sc, inc,
38 sc in stst.
Cut the yarn. Invisible fasten off (see the video, time, 7:57), weave in all ends.
17
COVER DECORATION
Sew the paws and the collar to the page. Use the ends which are
left on the paws. Sew along the place of crocheting the paws to
the collar. You can additionally sew the collar to the page and in
other places with a separate piece of yarn.
Use the chain stitch to embroider the title at the top of the page (see the video below).
Use a 3 mm hook. The height of the letters is 7 or 6 rows (depending on how many empty
rows turned out above the collar). Then crochet a row of sc (or slst) along the chain
stitches, invisible fasten off. Bring all yarn ends to the wrong side and fasten off.
The height of the letters is 7 rows example of the title with the 6 rows height of the letters.
Between N and O - 4 sc.
18
THE FIRST STEGOSAURUS PAGE
Start with the beige color yarn, hook 3 mm.
Make 35 ch.
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn.
R2-3: 34 sc, ch, turn (2 rows).
Next, we will crochet a pattern using the intarsia method according to the chart
(text description below):
start crocheting the 2d sc as usual (in beige color), grab the new (green) yarn
but don’t crochet it all the way (2 loops on the hook)
and pull it through the loops on the hook crochet BLO 4 sc with green color, start crocheting the 5th
with green, but don’t crochet it all the way
change the color to beige again (use the yarn from the second skein of beige color) and crochet to the end of the
row with beige, leaving all the ends of the yarn behind your work.
completely crochet sc in beige insert the hook in the next stitch and grab the green yarn
and pull it (2 loops on the hook), again grab the green color yarn and and pull it through the loops on the hook.
Next, crochet all the sc in green until the end of the row.
Make page borders in the same way as for the cover page (see page 17 and the note
below).
Note: on the second side, you can make a border in two colors:
from the end of the yarn of the initial chain 7 slst in beige. In the 8th slst change the color
to green (in total we have crocheted 8 slst beige and a green loop on the hook). Cut the
beige yarn and fasten off.
Crochet 18 slst with green, in the 19th slst change the color to beige (total 19 slst green
and a beige loop on the hook). Cut and fasten the green yarn.
Crochet 11 slst with beige.
Continue to make page borders in the same way as for the cover page (see page 17), but
change the yarn color to green according to the slst’s colors.
Fasten off all the ends of the yarn on the wrong side.
22
THE SECOND STEGOSAURUS PAGE
Start with the main color (beige) yarn, hook 3 mm.
Make 35 ch.
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn.
R2-3: 34 sc, ch, turn (2 rows).
Next, we will crochet a pattern using the intarsia method according to the chart
(text description below):
25
DECORATION PAGES WITH THE STEGOSAURUS
On the second page with the stegosaurus: embroider the eye on the head of the stegosaurus
with black yarn (on R23). From the right edge of the border to the eye - 4 sc.
Eye height - 1 sc. Eye width - 2 sc. See the video below.
Place the spike with the wrong then grab the stitch on the sew the entire last row of the spike the same
side of the last row up. Grab the spike as shown in the way
stitch on the page as shown in the photo
photo
then sew the spike on the back the same way then sew the spike along the blue lines
marked in the photo. Sew a few securing
stitches at the beginning and end of this seam.
Bring the yarn to the wrong side of the page
and fasten off.
26
SPOTS
Crochet with the dark green color yarn, hook 3 mm.
27
POP-UP DINOSAUR (Brachiosaurus)
Make 6 ch.
R1: begin from the second loop from the hook: 4 sc, 4 sc in the last one loop,
3 sc on the back of the chain, 3 sc in one starting loop = 14.
Note: when crocheting the head (R2-10), the increases and decreases should be located on
the side of the piece, if necessary, move the place of the increases and decreases by 1 stitch
forward or back.
R2: (5 sc, 2 inc)*2 = 18.
R3: 6 sc, 2 inc, 7 sc, 2 inc, 1 sc = 22.
R4: 7 sc, 2 inc, 9 sc, 2 inc, 2 sc = 26.
R5-7: 26 sc (3 rounds).
R8: 22 sc, dec, 2 sc = 25.
R9: 20 sc, 2 dec, 1 sc = 23.
R10: 19 sc, 2 dec = 21.
Fold the piece in half and crochet 5 joining sc through both layers
(how to crochet joining sc, see the video on page 5).
Move the stitch marker in the next sc to mark the start of the
round and continue crocheting in a spiral:
R11-15: 10 sc (4 rounds).
R16: 2 sc, inc, 7 sc = 11 (here, the increase is crocheted in the
middle of the neck on the wrong side, not on the side, see photo
on the right).
R17-22: 11 sc (6 rounds).
R23: 3 sc, inc, 7 sc = 12.
R24-30: 12 sc (7 rounds).
28
R31: side decrease, 8 sc, do not crochet the last stitch, the next round begins with it = 9
(10, taking into account not crocheted stitch).
R32: side decrease, 6 sc, do not crochet the last stitch, the next round begins with it = 7.
R33: side decrease, 4 sc, do not crochet the last stitch, the next round begins with it = 5.
R34: side decrease, 2 sc, do not crochet the last stitch, the next round begins with it = 3.
R35: side decrease.
Fasten off and cut the yarn. Hide the ends of the yarn inside the piece.
Connecting triangle
Crochet with the beige color yarn, hook 3 mm.
Make 6 ch.
R1: begin from the 2nd loop from the hook: 5 sc in back bumps of the foundation chain,
2 ch, turn.
R2: begin from the 2nd loop from the hook: 5 sc, sc and dc in one stitch, 2 ch, turn = 7.
R3: begin from the 2nd loop from the hook: 7 sc, sc and dc in one stitch, 2 ch, turn = 9.
R4: begin from the 2nd loop from the hook: 9 sc, sc and dc in one stitch, 2 ch, turn = 11.
R5: begin from the 2nd loop from the hook: 11 sc, sc and dc in one stitch, 2 ch, turn = 13.
R6: begin from the 2nd loop from the hook: 13 sc, sc and dc in one stitch, 2 ch, turn = 15.
R7: begin from the 2nd loop from the hook: 15 sc, sc and dc in one stitch = 17.
Preparation: when crocheting two yarn skeins of beige and green are used. Additionally,
from the beige skein, unwind two small ball (ball #5 = ~ 2 meters and #7 = ~ 4 meters).
From the green skein, unwind the ball #6 = ~ 3 meters.
From the skein of dark green color, unwind the ball #9 = ~ 2 meters.
Make 35 ch.
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn.
R2-3: 34 sc, ch, turn (2 rows).
Next, we will crochet a pattern using the intarsia method according to the chart
(text description on next page):
30
B - sc of beige color, G - sc of green color, D - sc of dark green color.
5 B = 5 sc of light beige color yarn, in the fifth sc, change the yarn color.
5 B* = 5 sc of light beige color yarn, completely crochet all five sc in beige.
ws – wrong side, rs – right side
R4 (rs): 12 B (cut the yarn), BLO 11 G, 11 B (use the yarn from the second skein of beige
color), ch, turn (that is, we use two different yarn skeins for crocheting the beige parts).
Leave the yarn behind your work.
R5 (ws): 7 B*, 24 G, 3 B, ch, turn. Leave the yarn in front of your work.
R6 (rs): 3 B, BLO 6 B (cut the yarn), 18 G (here we get a long floated yarn), 7 B, ch, turn.
R11 (ws): 2 B*, 5 G, 6 B, 4 G (use the yarn from the second skein of green color),
7 B (use yarn from the prepared ball #5), 4 G (use yarn from the prepared ball #6),
6 B (use yarn from the prepared ball #7), ch, turn.
R12 (rs): 5 B, 5 G, BLO 3 D, 3 B, 5 G, BLO 3 D (use yarn from the prepared ball #9),
3 B, 5 G, 2 B, ch, turn.
R13 (ws): 1 B, 5 G, 3 B, 3 D, 5 G, 3 B, 3 D, 5 G, 6 B, ch, turn.
R14 (rs): 5 B, 5 G, 3 D, 3 B, 5 G, 3 D, 3 B, 5 G, 2 B, ch, turn.
R15 (ws): 1 B, 6 G, 2 B, 3 D, 6 G, 2 B, 3 D, 6 G, 5 B, ch, turn.
R16 (rs): 4 B, 6 G, 3 D, 2 B, 6 G, 3 D, 2 B, 6 G, 2 B, ch, turn.
R17 (ws): 1 B, 7 G (cut the yarn), 1 B (cut the yarn), 3 D (cut the yarn), 7 G (cut the yarn),
1 B (cut the yarn), 3 D (cut the yarn), 7 G, 4 B, ch, turn.
R18 (rs): 3 B, 29 G, 2 B, ch, turn.
R19 (ws): 1 B, 29 G, 4 B, ch, turn.
R20 (rs): 3 B, 29 G, 2 B, ch, turn.
R21 (ws): 2 B, 29 G, 3 B, ch, turn.
R22 (rs): 2 B, 29 G, 3 B, ch, turn.
R23 (ws): 3 B, 28 G, 3 B, ch, turn.
R24 (rs): 2 B, 28 G, 4 B, ch, turn.
R25 (ws): 4 B, 27 G, 3 B, ch, turn.
R26 (rs): 2 B, 27 G, 5 B, ch, turn.
R27 (ws): 6 B*, 25 G, 3 B, ch, turn.
R28 (rs): 2 B, 24 G, 8 B, ch, turn.
31
R29 (ws): 10 B*, 22 G, dec B, ch with green yarn, turn = 33.
Cut the beige yarn from the #7 ball and fasten off.
insert hook into first stitch and pull up a grab the yarn and pull the yarn through all the
loop, insert hook into second stitch and pull loops on the hook
up second loop
Video: how to crochet the page, the corner and the dinosaur together
Scan QR or visit
https://youtu.be/TNHlin7Fh9Q
32
How to crochet the page, the triangle and the dinosaur together (duplicate the video):
join the yarn to the connecting triangle, insert the hook into the loop grab the yarn and pull it through the
as shown in the photo (from the wrong on the connecting triangle page only (step 2)
first, and then insert the hook
side, into the vertex on the short side)
through the page (right side to
wrong side) (step 1)
grab the yarn again, pull it through one grab the yarn again, pull it work the second stitch in the same
loop and through the connecting through all loops on the hook way, but in step 3, pull the green
triangle. Two loops on the hook (step 3). yarn through all the loops (instead
of beige)
between the pages and the connecting 6 green stitches are crocheted and 3 more stitches in beige
triangle, place the dinosaur's head so
that it is in the correct position when
opened. Crochet stitches in the same
way, but in step 3, pull the yarn to the
loop, dinosaur and to the corner.
33
Do not cut the yarn. Crochet the missing corner.
Note: for a more neat result, you can use a 2 mm hook for crocheting the missing corner
(optional).
ch and turn
R1: dec, 9 sc, ch, turn = 10.
R2: dec, 6 sc, dec, ch, turn = 8.
R3: dec, 6 sc, ch, turn = 7.
R4: dec, 3 sc, dec, ch, turn = 5.
R5: dec, 3 sc, ch, turn = 4.
R6: 2 dec, ch, turn = 2.
R7: dec, ch, turn.
Cut the yarn and fasten off.
Join the yarn to the lower right corner of the page (on the side
of the tail from the starting chain) and crochet 38 slst on the
side: i.e. crochet 28 slst to the connecting triangle, 1 slst in the
connecting row, 1 slst immediately after the connecting
triangle, 8 slst along the corner.
Do not cut the yarn, crochet the page border in the same way as the previous pages, i.e.
crochet: ch, 8 sc along the corner, slst in the loop on the connecting triangle, 1 sc in the
connecting row after the corner, 23 sc along the top of the page, inc in the last loop on this
side. Then continue crocheting the same way as and on other pages without changes (see
page 17). Fasten off all the ends of the yarn on the wrong side.
34
PAGE WITH EGG
Crochet with the beige color yarn, hook 3 mm.
Make 35 ch.
R1: begin from the second loop from the hook:
34 sc in back bumps of the foundation chain, ch, turn.
R2-28: 34 sc, ch, turn (27 rows).
R29: dec, 32 sc, ch, turn = 33.
R30: 31 sc, dec, ch, turn = 32.
R31: dec, 30 sc, ch, turn = 31.
R32: 29 sc, dec, ch, turn = 30.
R33: dec, 28 sc, ch, turn = 29.
R34: 27 sc, dec, ch, turn = 28.
R35: dec, 26 sc, ch, turn = 27.
R36: 25 sc, dec, ch, turn = 26.
R37: dec, 24 sc, ch, turn = 25.
R38: 23 sc, dec, ch = 24.
Align the page and corner (front sides inside) and crochet
them together with the 11 joining extended sc (same as on
the previous page).
Crochet the missing corner. Note: for a more neat result, you can use a 2 mm hook for
crocheting the missing corner (optional).
ch and turn
R1: 9 sc, dec, ch, turn = 10.
R2: dec, 6 sc, dec, ch, turn = 8.
R3: 6 sc, dec, ch, turn = 7.
R4: dec, 3 sc, dec, ch, turn = 5.
R5: 3 sc, dec, ch, turn = 4.
R6: 2 dec, ch, turn = 2.
R7: dec, turn = 1.
Do not cut the yarn. Crochet 38 slst on the side: i.e. crochet
8 slst along the corner, 2 slst in the connecting row arter the
corner, 28 slst. Cut the yarn.
Crochet a row of 38 slst on the opposite side, starting from
the first row (from the tail of the starting chain).
Do not cut the yarn. Make ch. Crochet on the top side of the
page: 24 sc, 1 sc in the connecting row, 1 slst in the top of
the connecting triangle, 7 sc along the corner, inc.
Then continue crocheting the same way as and on other
pages without changes (see page 17). Fasten off all the ends of the yarn on the wrong side.
35
EGG
Strap
Crochet with the light brown color yarn, hook 2 mm.
Make 8 ch.
R1: begin from the second loop from the hook: 7 sc, ch, turn.
R2-9: 7 sc, ch, turn (8 rows).
Cut the yarn. Fasten off, weave in all ends.
Make 12 ch.
R1: begin from the second loop from the hook: 11 sc, 2 ch, turn.
R2: begin from the second loop from the hook: 11 sc, sc and dc in one stitch, 2 ch, turn = 13.
R3: begin from the second loop from the hook: 13 sc, sc and dc in one stitch, 2 ch, turn = 15.
R4: begin from the second loop from the hook: 15 sc, sc and dc in one stitch, 2 ch, turn = 17.
R5: begin from the second loop from the hook: 17 sc, sc and dc in one stitch, 2 ch, turn = 19.
R6: begin from the second loop from the hook: 19 sc, sc and dc in one stitch, 1 ch, turn = 21.
R7: 21 sc, 2 ch, turn.
R8: begin from the second loop from the hook: 21 sc, sc and dc in one stitch, 1 ch, turn = 23.
R9: 23 sc, 2 ch, turn.
R10: begin from the second loop from the hook:
9 sc, crochet the strap to the egg with 7 sc (the
strap behind the egg), 7 sc, sc and dc in one stitch,
1 ch, turn = 25.
R11-18: 25 sc, ch, turn (8 rows).
R19: 9 sc, crochet the strap to the egg with 7 sc (strap in front of egg), 9 sc, ch, turn = 25.
Semicircle #1
Make 2 ch.
R1: 5 sc in 2nd ch from hook, ch, turn.
R2: sc, inc, 3 sc in one stitch, inc, sc, ch, turn = 9.
R3: 2 sc, inc, 1 sc, 3 sc in one stitch, 1 sc, inc, 2 sc, ch = 13.
Crochet 7 sc along the base of the semicircle.
Fasten off and cut the yarn, leaving the long end for sewing.
Semicircle #2
Make 2 ch.
R1: 5 sc in 2nd ch from hook, ch, turn.
R2: sc, inc, 3 sc in one stitch, inc, sc, ch, turn = 9.
R3: 2 sc, inc, 1 sc, 3 sc in one stitch, 1 sc, inc, 2 sc, ch, turn = 13.
R4: 13 sc, ch.
Crochet 9 sc along the base of the semicircle.
Fasten off and cut the yarn, leaving the long end for sewing.
Oval
R1: 6 sc in MR.
R2: inc*6 = 12.
R3: (1 sc, inc)*2, 1 sc = 7 (5 sc leave not crocheted).
Cut the yarn, leaving the long end for sewing. Invisible fasten off.
Small spot
R1: 6 sc in MR.
Cut the yarn, leaving the long end for sewing. Invisible
fasten off.
37
THE SECOND PART OF THE EGG
Crochet with the light brown color yarn, hook 2 mm.
Work R1-19 in the same way as R1-19 in the first part of the egg, but do not crochet the
strap to the egg, crochet regular sc's instead (see description on page 36).
R20: dec, 9 sc, dec, ch, turn = 11 (12 stitches of R19 leave not crocheted).
R21: dec, 9 sc, ch, turn = 10.
R22: 4 sc, dec, ch, turn = 5 (4 sts of R21 leave not crocheted).
R23: dec, sc, dec, ch, turn = 3.
R24: 3 sc, ch, turn.
R25: dec, sc, ch, turn = 2.
R26: dec, ch, turn
R27: sc.
Cut the yarn and fasten off.
Crochet together the two parts of the egg and semicircles with sc (as shown in the photos
below). Crochet semicircles at the bottom part of the egg, first crochet the semicircle #1
with seven sc, crochet 14 sc between the semicircles, then crochet the semicircle #2 with
nine sc. After the two parts of the egg are crocheted together, continue crocheting along
the top part of the egg (one layer). Invisible fasten off. Hide all the ends of the yarn.
39
DINO IN THE EGG
Crochet with the green color yarn, hook 2 mm.
Neck
R7: join the yarn in the 18th stitch of the R6
of the head, as shown in the first photo on
the right and crochet 9 sc (place the stitch
marker in the first loop of this round).
R8: 6 sc, inc, 2 sc = 10.
R9-10: 10 sc (2 rounds).
R11: 4 sc, dec, 3 sc, inc = 10
R12: 9 sc, inc = 11.
R13: 11 sc.
40
R14: 4 sc, dec, 5 sc, 22 sc on the back of the dino = 32 (see photos below).
R15: continue crocheting on the neck 19 sc, 2 inc, 11 sc = 34.
Note: if there is a hole between the neck and back, then sew it.
Important: the dinosaur's head must be turned towards the back.
In R16-21, decreases and increases should be on the sides. If necessary, move the place of
decreases and increases back or forward.
R16: 3 sc, dec, 15 sc, 2 inc, 12 sc = 35.
R17: 35 sc.
R18: 3 sc, dec, 17 sc, inc, 12 sc = 35.
R19: 20 sc, 2 inc, 13 sc = 37.
R20: 2 sc, 2 dec, 16 sc, 2 inc, 13 sc = 37.
R21: 2 sc, dec, 7 sc. Next, we will crochet the leg:
skip 22 sc, 4 sc = 36.
R22: 1 sc, skip 4 sc, 5 sc.
Move the sitch marker to the next sc on the leg.
R23: 10 sc.
R24: 4 sc, dec, 2 sc, dec = 8.
Cut the yarn and sew the bottom of the leg.
41
Tail
Join the yarn to the next sc next to the second
leg, and starting from the same stitch,
crochet:
R1: 8 sc.
R2: 3 sc, inc, 2 sc, dec = 8.
R3: dec, 6 sc = 7.
R4: dec, 1 sc, inc, 1 sc, dec = 6.
Cut the yarn. Tighten the loops. Sew all the holes in the dinosaur's body.
Embroider an eye on R5 (counting from above)
with black yarn.
Distance from edges of head to eye is about 5 sc.
Join the chain to the top of the egg as shown in the photo below. With
the ends of the yarn, make a few securing stitches at the joining
points, fasten the yarn and hide the end of the yarn.
Thread the strap through the strap on the back of the egg.
42
PAGE WITH VOLCANO
Start with the beige color yarn, hook 3 mm.
Make 34 ch, tie light brown color yarn to beige, and make 1 light brown ch (see photos
and the video below). Cut light beige yarn and work with light brown color.
34 ch, tie light brown color yarn to beige pull the white yarn closer to the hook grab the light brown yarn
make ch
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn.
R1 is crocheted
43
VOLCANO
Crochet with the coffee color yarn, hook 2 mm.
Make 18 ch. Close the ring with slst. Do not need to make ch 1.
R1: sc in each back bump of the foundation chain = 18 sc in total.
44
Lava
Crochet with the orange color yarn, hook 2 mm.
Join the yarn to the initial chain of the volcano (from the inside to
out of the volcano, as shown in the photo on the right).
R1-4 are crocheted the inside out.
R1: 18 sc.
R2: BLO 18 sc.
R1 is crocheted R2 is crocheted
R3: (inc, 8 sc)*2 = 20. Increases should be on the sides. If necessary, move the place of
increments.
R4: 20 sc.
Turn the front side out, as shown in the photo below. Crochet sc to move the current loop
to the side of the volcano (I crochet 3 sc).
R4 is crocheted. Lava is not turned out Lava turned right side out, 3 sc are crocheted for offset
Fasten off and cut the yarn, leaving the long end for sewing
45
Video: how to crochet lava flows
Scan QR or visit
https://youtu.be/dRpWOeLwLm0
Sew or steam the lava. Fasten off. Hide all ends of the yarn on the wrong side of the lava.
VOLCANIC ASH
Crochet with the gray color yarn, hook 2 mm.
Piece 1
R1: 6 sc in MR. Piece 2
R2: (2 sc, inc)*2 = 8. R1: 6 sc in MR.
Cut the yarn. Leave the R2: (1 sc, inc)*3 = 9.
short end of the yarn to R3: (2 sc, inc)*3 = 12.
later sew a small hole Cut the yarn. Leave the
between the pieces. short end of the yarn.
Invisible fasten off. Invisible fasten off.
Main piece
R1: 6 sc in MR.
R2: inc*6 = 12.
R3: (5 sc, inc)*2 = 14.
R4: 13 sc, 12 sc along the piece 2, 1 sc on the main piece = 26 (see the photo above).
R5: 5 sc, dec, 11 sc, dec, 6 sc = 24.
R6: 6 sc, 8 sc along the piece 1, 18 sc = 32.
46
R12: 2 sc, dec, 3 sc, 3 dec, 2 sc, dec, 1 sc, dec, 2 sc, 3 dec, 2 sc, dec = 22.
R13: 4 sc, 3 dec, 5 sc, 3 dec, sc = 16.
R14: 3 sc, 2 dec, 4 sc, 2 dec, sc = 12.
R15-16: 12 sc (2 rounds).
R17: 3 sc, dec, 4 sc, dec, 1 sc = 10.
R18-23: 10 sc (6 rounds).
R24: fold the piece in half and crochet 4 sc through both layers.
Note: if necessary, crochet sc to move the beginning of the R24 to the side part.
Cut the yarn. Fasten off. Hide the end of the yarn inside the ash.
Join the coffee color yarn to the side stitch of the R24 and make
40-45 ch (see the photo on the right). Cut the yarn and fasten off.
Use the hook to thread the chain ch through the holes in the volcano.
Join the chain ch on the R24 of the ash from the second side.
Tie a knot in the chain to limit the height of the ash.
Sew the bottom edge of the volcano (R22) between the go back to the middle sew the center part of the
3rd and 4th light brown rows of the page (counting of the page volcano to the page. Fasten
from the bottom). There should be the same number of off the yarn.
loops on the left and right of the volcano to the edge of
the page.
47
Optionally. Add a volcanic eruption: attach mustard (or red) yarn to the
front loops on the lava and make chain ch of different lengths.
Fasten off and hide all ends of the yarn.
Make 34 ch, tie light brown color yarn to beige, and make 1 light brown ch (see photos
and the video on page 43). Cut light beige yarn and work with light brown color.
R1: begin from the second loop from the hook: 34 sc in back bumps of the foundation
chain, ch, turn.
Next, we will crochet a pattern using the intarsia method with 2 yarn colors.
B - sc of beige color, K - sc of light brown color.
5 B = 5 sc of light beige color yarn, in the fifth sc, change the yarn color.
5 B* = 5 sc of light beige color yarn, completely crochet all five sc in beige.
ws – wrong side, rs – right side
Join the beige color yarn.
R15 (ws): 8 B, 26 K, ch, turn.
R16 (rs): 22 K, 12 B, ch, turn.
R17 (ws): 16 B, 18 K, ch, turn.
R18 (rs): 15 K, 19 B, ch, turn.
R19 (ws): 23 B, 11 K, ch, turn.
R20 (rs): 9 K, 25 B, ch, turn.
R21 (ws): 28 B, 6 K, ch, turn.
R22 (rs): 4 K, 30 B, ch, turn.
R23 (ws): 32 B, 2 K, ch, turn.
R24 (rs): 1 K, 33 B, ch, turn.
Cut the light brown yarn and fasten off, then crochet all
rows with the beige color yarn.
48
T-REX
Strap
Crochet with the orange color yarn, hook 2 mm.
Make 6 ch.
R1: begin from the second loop from the hook 5 sc, ch, turn.
R2-9: 5 sc, ch, turn (8 rows).
Cut the yarn. Fasten off, weave in all ends.
LEGS
Crochet with the orange color yarn, hook 2 mm.
First leg
Make 5 ch.
R1: begin from the second loop from the hook: 3 sc, 4 sc in the last one loop,
2 sc on the back of the chain, 3 sc in one loop = 12.
R2: (4 sc, 2 inc)*2 = 16.
R3-4: 16 sc (2 rounds)
R5: 14 sc, dec = 15.
R6: fold the piece in half and crochet 3 joining sc through both layers (how to crochet
joining sc, see the video on page 5), move the stitch marker to the next stitch, 8 sc.
R7-8: 8 sc (2 rounds).
R9: 1 sc, fold the piece in half and crochet 2 joining sc through both layers,
1 sc through both layers. Cut the yarn. Fasten off. Hide the end of the yarn inside the leg.
Second leg
Work R1-8 in the same way as the and in the first leg.
R9: 4 sc (if necessary, crochet one extra sc), fold the piece in half
and crochet 2 joining sc through both layers, 1 sc through 2 layers.
Cut the yarn. Fasten off. Hide the end of the yarn inside the leg.
ARMS (make 2)
Crochet with the orange color yarn, hook 2 mm.
R1: 6 sc in MR.
R2-6: 6 sc (5 rounds)
R7: fold the piece in half and crochet joining sc through both layers, sc through 2 layers.
Cut the yarn. Fasten off. Hide the end of the yarn inside the arm.
TAIL
Crochet with the orange color yarn, hook 2 mm.
R1: 6 sc in MR.
R2: 2 sc, inc, 3 sc = 7.
R3: 3 sc, inc, 3 sc = 8. Cut the yarn. Invisible fasten off.
49
HEAD AND BODY
Crochet with the orange color yarn, hook 2 mm.
Make 7 ch.
R1: begin from the second loop from the hook: 5 sc, 4 sc in the last one loop,
4 sc on the back of the chain, 3 sc in one loop = 16.
Note: increases and decreases should be located on the sides, if necessary, you can move
increases and decreases by 1-2 stitches forward or backward.
R2: (6 sc, 2 inc)*2 = 20.
R3: 7 sc, 2 inc, 8 sc, 2 inc, 1 sc = 24.
R4: 8 sc, 2 inc, 10 sc, 2 inc, 2 sc = 28.
R5: 9 sc, 2 inc, 12 sc, 2 inc, 3 sc = 32.
R6-8: 32 sc (3 rounds).
R9: 27 sc, inc, 4 sc = 33.
R10: 9 sc, 2 dec, 20 sc = 31.
R11: 7 sc, 3 dec, 12 sc, inc, 5 sc = 29
R12: 3 sc, skip 12 sc, 14 sc = 17. R12 is crocheted
R17: 5 sc, inc, 11 sc, inc, 3 sc, start to crochet the strap to the body with 2 sc = 25.
R18: crochet the strap to the body with 3 sc, 2 sc, inc, 19 sc = 26.
R19: 6 sc, inc, 13 sc, inc, 5 sc = 28.
R20: 6 sc, inc, 21 sc = 29.
R21: 7 sc, inc, 15 sc, inc, 5 sc = 31.
R22: 8 sc, inc, 22 sc = 32.
R23: 9 sc, inc, 16 sc, inc, 5 sc = 34.
R24: 10 sc, inc, 17 sc, 4 ch, fold the tail in a half (along the
increase) and begin from the first stitch of increase on the tail
crochet 8 sc along the tail, sc in each ch,
sc into the same loop on the dinosaur's body (see photos above),
6 sc = 52.
R25: 52 sc.
R26: 36 sc, dec, 14 = 51.
50
R27: 34 sc, 2 dec, 12 sc, start crocheting the strap to the body with 1 sc = 49.
R28: crochet the strap to the body with 4 sc, 6 sc, 1 dec, 20 sc, 3 dec, 11 sc = 45.
R29: 3 sc, crochet the 2nd leg to the body with 3 sc, 3 sc, 2 dec, 18 sc, 3 dec, 8 sc = 40.
R30: 7 sc, 2 dec, 10 sc, crochet the first leg to the body with 3 sc, 2 sc, 3 dec, 8 sc = 35.
R31: 4 sc, 4 dec, 12 sc, 3 sc in front loops together, (8 sc leave not crocheted) = 21 (29).
Optional. Put a rustler inside the dinosaur.
Make 21 ch.
First leaf:
1: begin from the second loop from the hook 5 slst.
2: 6 ch, begin from the second loop from the hook 5 slst.
3-4: 5 ch, begin from the second loop from the hook 4 slst.
5-6: 4 ch, begin from the second loop from the hook 3 slst.
7-8: 3 ch, begin from the second loop from the hook 2 slst.
9: 2 ch, begin from the second loop from the hook 1 slst.
52
10: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st
on the opposite side of the chain (as shown in the photo below).
11: 2 ch, begin from the second loop from the hook 1 slst, slst in the next st.
12-13: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
14-15: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
16-17: 5 ch, begin from the second loop from the hook 4 slst, slst in the next st.
2 slst along the initial chain.
16 ch.
Second leaf:
1: begin from the second loop from the hook 5 slst.
2-3: 5 ch, begin from the second loop from the hook 4 slst.
4-5: 4 ch, begin from the second loop from the hook 3 slst.
6: 3 ch, begin from the second loop from the hook 2 slst.
7: 2 ch, begin from the second loop from the hook 1 slst.
8: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
9-10: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
11-12: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
13: 5 ch, begin from the second loop from the hook 4 slst, slst in the next st.
2 slst along the chain.
detail view after crocheting step 7 detail view after crocheting step 13 and 2 slst along the chain
(Second leaf is crocheted)
53
14 ch
Third leaf:
1: begin from the second loop from the hook 4 slst.
2: 5 ch, begin from the second loop from the hook 4 slst.
3-4: 4 ch, begin from the second loop from the hook 3 slst.
5: 3 ch, begin from the second loop from the hook 2 slst.
6: 2 ch, begin from the second loop from the hook 1 slst.
7: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
8-9: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
10-11: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
2 slst along the chain.
12 ch.
Fourth leaf:
1: begin from the second loop from the hook 3 slst.
2-3: 4 ch, begin from the second loop from the hook 3 slst.
4: 3 ch, begin from the second loop from the hook 2 slst.
5: 2 ch, begin from the second loop from the hook 1 slst.
6: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
7-9: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
2 slst along the chain.
10 ch.
Top leaf:
1: begin from the second loop from the hook 4 slst.
2-3: 4 ch, begin from the second loop from the hook 3 slst.
4-5: 3 ch, begin from the second loop from the hook 2 slst.
6: 2 ch, begin from the second loop from the hook 1 slst.
7: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
8: 2 ch, begin from the second loop from the hook 1 slst, slst in the next st.
9-10: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
11: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
5 slst along the chain.
54
The opposite side of the branch:
6 ch.
Fourth leaf (on the opposite side):
Crochet in the same way as and the fourth leaf on the first side.
7 slst along the chain.
7 ch
Third leaf (on the opposite side):
Crochet in the same way as and the third leaf on the
first side.
Crochet in the same way as and the third leaf on the
first side.
8 ch
Second leaf (on the opposite side):
Crochet in the same way as and the second leaf on the
first side.
9 slst along the chain.
8 ch
First leaf (on the opposite side):
Crochet in the same way as and the first leaf on the first side.
14 slst along the chain.
Cut the yarn and fasten off, leaving a long end for sewing on the fern.
55
HALF FERN BRANCH
Crochet with the green color yarn, hook 2 mm.
14 ch
First leaf:
1: begin from the second loop from the hook 5 slst.
2-3: 5 ch, begin from the second loop from the hook 4 slst.
4-5: 4 ch, begin from the second loop from the hook 3 slst.
6: 3 ch, begin from the second loop from the hook 2 slst.
7: 2 ch, begin from the second loop from the hook 1 slst.
8: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
9-10: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
11-12: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
13: 5 ch, begin from the second loop from the hook 4 slst, slst in the next st.
2 slst along the chain.
14 ch
Second leaf:
1: begin from the second loop from the hook 4 slst.
2: 5 ch, begin from the second loop from the hook 4 slst.
3-4: 4 ch, begin from the second loop from the hook 3 slst.
5: 3 ch, begin from the second loop from the hook 2 slst.
6: 2 ch, begin from the second loop from the hook 1 slst.
7: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next ch.
8-9: 3 ch, begin from the second loop from the hook 2 slst,
slst in the next ch.
10-11: 4 ch, begin from the second loop from the hook 3
slst, slst in the next ch.
2 slst along the chain.
10 ch
Top leaf:
1: begin from the second loop from the hook 4 slst.
2: 5 ch, begin from the second loop from the hook 4 slst.
3-4: 4 ch, begin from the second loop from the hook 3 slst.
5: 3 ch, begin from the second loop from the hook 2 slst.
6: 2 ch, begin from the second loop from the hook 1 slst.
7: 2 ch, begin from the second loop from the hook 1 slst, skip 1 loop, slst in the next st.
8-9: 3 ch, begin from the second loop from the hook 2 slst, slst in the next st.
10-11: 4 ch, begin from the second loop from the hook 3 slst, slst in the next st.
20 slst along the chain.
56
Cut the yarn and fasten off, leaving a long end for sewing on the fern.
Sew ferns to the blank page. Sew along the branch and in the center of the leaf. Fasten the
ends of the yarn on the wrong side.
57
ASSEMBLY
1. With a hook 3 mm. With a separate piece of beige yarn. Crochet the cover and the first
stegosaurus page together with sc (see photo and video below). Start crocheting from the
upper right corner of the cover, i.e. position the cover “towards you”, so that the front side
of the assembly row is on the cover side. In the corners crochet 1 sc.
Make invisible fasten off (be sure to skip the first stitch, see the video below, time 3:34).
Hide the ends of the yarn inside two pages.
Optionally, you can put a rustler between the pages.
For convenience, let's call the two crocheted pages sheet 1.
2. In the same way, crochet the second stegosaurus page and the page with
brachiosaurus together (sheet 2). Start crocheting from the upper right corner of the page
with brachiosaurus, i.e. position the brachiosaurus page “towards you”.
Make invisible fasten off. Hide the ends of the yarn inside two pages.
58
3. Crochet the page with the egg and the page with volcano together (sheet 3), and in the
process of crocheting, crochet the egg strap to the sheet:
Start crocheting from the top right corner of the page with the egg, i.e. position the page
with the egg “towards you”.
Make 57 sc, crochet the egg strap with 6 sc, 56 sc, crochet the egg strap on the other side
with 6 sc, 23 sc. Make invisible fasten off. Hide the ends of the yarn inside two pages.
4. Crochet the page with t-rex and the back cover (the blank page or the page with ferns)
together (sheet 4), in the process of crocheting, crochet the t-rex strap to the sheet. Start
crocheting from the top right corner of the back cover: make 58 sc, crochet the t-rex strap
with 6 sc, 55 sc, crochet the t-rex strap with 6 sc, 23 sc.
Make invisible fasten off. Hide the ends of the yarn inside two pages.
59
Binding:
Crochet with the beige color yarn, hook 3 mm.
Join the yarn to sheet 1 as shown in the photo below (to the lower right corner of the first
stegosaurus page)
R1: 40 sc.
R2: ch, turn, 40 sc through R1 and sheet 2 (align pages with the stegosaurus inside to
make a spread).
60
R5: ch, turn, 40 sc through R4 and sheet 3.
61
Insert the hook into the back loop of the second stitch (from the binding of the page) on
the page. Join the yarn as shown in the photo below, skip one stitch, and starting from the
next stitch, crochet 1 sc per row. At the end of the row, make invisible fasten off. Secure
the yarn ends. Hide the ends of the yarn inside the pages. Repeat for the other side of the
binding.
The child's name can be embroidered on the cover or other personalization can be made.
You can crochet an eyelet for attaching to a stroller or crib.
You can add a wooden ring or teether to the binding by attaching it to a crocheted loop.
Congratulations! The book is ready :)
I would be happy to see your work :) When you post finished toys on Instagram give a
link to my profile @zenknit_toys and mark your works with the tag #zenknit_toys or
#dinobookzenknit. Thanks!
The pattern tested by: @olik_toys, @elena_luksha, @terekhova.toys, @krolik_v_shlyape,
@_toy_country_ , @indecisive.crafter, @heklanjenana, @virginiebeaubien, @lalye1,
@el_izim_, @vildehjerte, @sonntagskind1990, @holly_eliason, @maris_toys
62