Professional Documents
Culture Documents
Highćcapacity Rotary Valves For General or Fibrous Slurry Service
Highćcapacity Rotary Valves For General or Fibrous Slurry Service
3:VeeĆBall
W7419/IL
S Temperatures to 427_C
D102429X412
Product Flier PF51.3:Vee-Ball
The Vee-BallR Valve Family
2
Product Flier PF51.3:Vee-Ball
The Vee-BallR Valve Family (Continued)
Other Rotary Valves
PACKING STUD O-RING
The eplugt Family...The Design
V500 valve uses rugged valve PACKING NUT PACKING
FOLLOWER
components and a choice of
erosion-resistant trim materials for
highly erosive and severe
operating conditions at pressures
to PN 100 (Class 600) and O-RING
temperatures to 538_C.
PACKING SET
cammed-segmented V-notched
14B9917-B
ball, with the inherent ruggedness E0735 / IL
W6116-1
W5393
3
Product Flier PF51.3:Vee-Ball
The Vee-BallR Valve Family (Continued)
W5978
W6475-1
Type 1061 Actuator
Type 1052 Actuator
Type 1051 and 1052 Pneumatic instrument accessories, Valve Instrumentation and
Diaphragm Actuators...Rugged, handwheels and piston bypass Accessories
heavy-duty spring-return valves, and a maintenance
FIELDVUER Digital Valve
actuators. These actuators are lockout device.
Controller...Available mounted
available with a variety of
on Type 1051 and 1052
instrument accessories, Type 1078 Declutchable
actuators.
handwheels, adjustable travel Handwheel Actuator...Available
stops, and a maintenance on Type 1051, Type 1052, and
Positioners and
lock-out device. 1061 actuators.
Transducers...Pneumatic
positioners and electro-pneumatic
Type 1061 Pneumatic Piston Type 1077 Handwheel
positioners and transducers can
Actuator...Heavy-duty piston Actuator...Available for
be provided with these actuators.
actuator available with a variety of manual-only operation.
Position Transmitters,
Solenoid Valves, Volume
Boosters, and Limit
Switches...Also available.
BALL ROTATION V150, V200
MOUNTING ACTION(1)
TO CLOSE & V300
PDTC CCW A
Right-Hand
PDTO CCW B STYLE D
PDTC CCW D
Left-Hand
PDTO CCW C STYLE C
LEFT-HAND
Left-Hand PDTC CW C MOUNTING
(Optional)(2) PDTO CW D
1. PDTC—Push-down-to-close, and PDTO—Push-down-to-open.
2. A left hand ball will be required for the 3- through 12-inch Series B
and the 14- to 20-inch, with or without attenuator.
STYLE B
STYLE A
The Actuators are Available in any of
Four Styles and Positions (Above the
Pipeline as Shown Here, Below, or
parallel with the Pipeline)
RIGHT-HAND
MOUNTING
A1579-4/IL
4
Product Flier PF51.3:Vee-Ball
Selecting Vee-BallR Products
Only a few of the more commonly selected product materials,
sizes, options, and accessories are covered in this flier.
Contact your nearest sales office (refer to the back cover) for
assistance in selecting and sizing these products. More
detailed specifications are available on request.
Selecting Valve Components
Valve Type Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Body Materials, End Connections, and Ratings . . . . . . 6
Valve Component Materials and Temperatures . . . . . . 7
Selecting an Actuator
Type 1051 and 1052 Pneumatic Diaphragm
Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Type 1061 Pneumatic Piston Actuator . . . . . . . . . . . . . . 9
Selecting Valve Instrumentation and Accessories
FIELDVUER Digital Valve Controller . . . . . . . . . . . . . . 10
3610J Series Valve Positioners . . . . . . . . . . . . . . . . . . . 11
Other Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reference Information
Maximum Inlet Pressure for CW2M Valve Bodies . . . 14
Shutoff Pressure Drop Limits for Trim Parts . . . . . . . . 14
Flow Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Actuator-Valve Selection (Shutoff Pressure Drops) . 16
Approximate Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sales Offices and Sales Representatives . . . . . . . . . 20
5
Product Flier PF51.3:Vee-Ball
Body Materials, End Connections, and Ratings
Design V150
Ratings and
Valve Body
Sizes Raised-Face Notes
Materials
Flanges
DN 25,
40, 50, DIN materials
DIN 80, 100, PN10/16 available in
1.0619,or DIN 150, 200, DIN sizes and
1.4408 250 ratings
DN 300 PN16
CF3M, WCC, 1, 1-1/2, CG8M
CG8M, or 2, 3, 4, available in
CW2M 6, 8, 10, 12 inch sizes and
Class 150 ANSI ratings
WCC, only. Refer to
CG8M, or 14, 16, 20 page 14 for
CW2M CW2M ratings
Ratings and
Valve Body Size,
Raised-Face Flange Notes Micro-Notch V-Notch Ball for DN 25 or 1-Inch
Materials Inches
Compatibility Valve. Use for Cv of 8.4 or Less
1, 1-1/2, 2 Class 150/300/600
Class 150 Refer to
WCC CG8M,
WCC, CG8M or 3 4
3, page 14 for
Class 300/600
CW2M CW2M
6, 8 Class 150/300/600 ratings
10 Class 150
Design V300
Ratings and Raised-Face
Valve Body Materials Sizes Notes
Flanges
DIN materials available in DIN
DIN 1.0619, or DIN 1.4408 DN 25, 40, 50, 80, 100 PN25/40
sizes and ratings
CF3M, WCC, CG8M, or
1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CW2M Refer to page14
age14 for CW2M
Class 300
WCC, CG8M, or ratings
14, 16
CW2M
6
Product Flier PF51.3:Vee-Ball
Valve Component Materials and Temperatures
BODY, SHAFT, AND BALL (TEMPERATURE IS DETERMINED BY OTHER PARTS LISTED BELOW)
H CF3M (316L stainless steel), H DIN 1.0619 steel, H WCC steel, or
Valve Body
H CG8M (317 stainless steel)
Valve Shaft H S20910 (Nitronic 50 stainless steel) or H S17400 (17-4PH stainless steel)
H CF3M (316L stainless steel), H chromium-plated CF3M, H CG8M (317 stainless steel), or
V-Notch Ball
H chromium-plated CG8M
SEAL, BEARING, AND PACKING
MAXIMUM
TEMPERATURE, _C
SEAL MATERIAL BEARING MATERIAL PTFE NOTES
Graphite
V-Ring
Packing
Packing
H PEEK (poly-ether-ether-ketone)/PTFE, H Minimum temperature
Composition (TCM plus) H R30006 (alloy 6B) or H silver-plated 232 232 for DIN valve bodies is
R30006 –10_C
Flat metal—(spring-tempered stainless H Minimum
Mi i temperature
PEEK/PTFE 232 260
steel) for ANSI constructions
(available on DN 80 through 300 [3- through H R30006, H silver-plated R30006, or H is –29_C for steel
232 427 valves and –46_C for
12-inch] sizes only) S31600L (316L stainless steel) nitride
stainless steel valves
HD (heavy-duty) metal PEEK/PTFE 232 260 H Contact your sales
(H CF10SMnN [Nitronic 60 stainless steel] office for
or ENVIRO-SEAL packing
H R30006, H silver-plated R30006, or H
H CD7MCuN [alloy 255 duplex stainless 232 288 temperatures and
S31600L nitride
steel], or H R30006 pressures
ressures
PEEK/PTFE 232 260 H Contact your sales
Flow ring (steel or stainless to match
H R30006, H silver-plated R30006, or H office for pressure
body material) 232 427 drops and temperatures
S31600L nitride
OTHER PARTS with
ith TCM
TCM-Ultra
Ultra
composition seal.
seal
MAXIMUM
TEMPERATURE, _C
PART MATERIAL PTFE
Graphite
V-Ring
Packing
Packing
N07750 (Inconel X750) and PTFE with Temperature is
Wave spring and radial seal (HD metal only)
N10276 (Hastelloy C) determined by parts
arts listed
Micro-notch
Micro notch V-notch
V notch ball for DN 25 Chromium-plated CG8M or solid alloy 6 above
(1-inch) size Solid VTC ceramic 93 93
Gasket Graphite Temperature is
determined by parts listed
Optional line bolting H B7, H B7M, or H strain-hardened B8M above
7
Product Flier PF51.3:Vee-Ball
Type 1051 and 1052 Actuators
Type 1051 and 1052 pneumatic Options...H Top-mounted
diaphragm rotary actuators are handwheel, H Type 1078
spring-return actuators that declutchable handwheel actuator,
provide reliable operation for the H Adjustable up- and down-travel
valves in this flier. stops,
The Type 1051 actuator is H Actuator locking mechanism
suitable for on-off operation or for that keeps the actuator in a
throttling operation when locked position during
equipped with a valve controller maintenance, and H Pipe-away
or positioner. The Type 1052 vent for remote venting of the
actuator is suitable for on-off or actuator housing.
throttling with or without a
controller or positioner. Accessories...H Pneumatic and
electro-pneumatic valve
These actuators feature
positioners, H FIELDVUER digital
single-joint linkage with
splined-and-clamped levers for valve controller, and H Limit and
minimum lost motion and high proximity switches.
control accuracy. W3813-1
MAXIMUM MAXIMUM
ACTUATOR NOMINAL OPERATING SIZING VALVE
SIZE PRESSURE RANGES PRESSURE, BREAKOUT AMBIENT
BAR TORQUE, NSm TEMPERATURES, MATERIALS
_C
Type Type Type Type Type Type
Bar Psig
1051 1052 1051 1052 1051 1052
H 0 to 1.2, H 0 to H 0 to 18, H 0 to Diaphragm: Nitrile
--- 20 --- 3.4 --- 42
2.3, and H 0 to 2.8 33, and H 0 to 40 (standard) or
silicone elastomers
33 33 H 0 to 1.2, H 0 to H 0 to 18, H 0 to 3.8 85 132 O-rings (for
2 3 H 0.
2.3, 0 to 2.8,
2 8 and 33, H 0 to 40,
33 40 and optional
40 40 H 0 to 3.8 H 0 to 55 4.5 322 371 Nitrile: –40 to 82 handwheel): Nitrile
Silicone: –50
50 to 149 or EPDM
H 0 to 1.2, H 0 to H 0 to 18, H 0 to Housing: Cast iron
60 60 2.8 626 730
2.3, and H 0 to 2.8 33, and H 0 to 40 (standard) or steel
Other Major Metal
H 0 to 2.3, H 0 to H 0 to 33, H 0 to Parts: Aluminum,
--- 70 --- 3.8 --- 1370
2.8, and H 0 to 3.8 40, and H 0 to 55 steel or cast iron
W4742-1
Size 33 Actuator
8
Product Flier PF51.3:Vee-Ball
Type 1061 Actuators
Type 1061 pneumatic rotary accessible without removing any
actuators are double-acting parts.
piston actuators that provide
reliable operation for the valves in Options... H Type 1078
this flier. declutchable handwheel actuator
with cylinder bypass valve,
The Type 1061 can be used with H Actuator locking mechanism
a two-position control signal for that keeps the actuator in a
on-off operation or with a valve locked position during
controller or positioner for maintenance, and
throttling operation. H Pipe-away vent for remote
venting of the actuator housing.
These actuators feature
single-joint linkage with Accessories...H Pneumatic and
splined-and-clamped levers for electro-pneumatic valve
minimum lost motion and high postioners and H Limit and
control accuracy. proximity switches.
9
Product Flier PF51.3:Vee-Ball
Type DVC5020 Digital Valve Controller
FIELDVUE digital valve
controllers are communicating,
microprocessor-based controllers Access to diagnostics is through
that convert a current signal to a a Model 275 HART communicator
pressure signal to operate the or a personal computer using
actuator. The controller gives Windowst software.
easy access to actuator-valve
information that is critical to Options...Process PID,
process operation. autocalibrate (AC) for automatic
calibration and ease of
ValveLink installation, advanced diagnostics
Software...ValveLinkt software (AD), and pressure gauges.
allows easy access to the
information available from the CE Mark...The FIELDVUE
W7419/IL
valve. The software provides controller has the CE Mark to
diagnostic information such as Type DVC5020 Controller on a EMC Directive (electromagnetic
dynamic error band and step Valve and Actuator compatibility).
response on easy-to-interpret
screens.
10
Product Flier PF51.3:Vee-Ball
3610J Series Valve Positioners
The 3610J Series pneumatic and The positioners are easily
3620J Series electro-pneumatic reversible for direct or reverse
valve positioners can be used action without additional parts.
with Type 1051, 1052, or 1061
actuators for accurate valve The 3610J and 3620J positioners
positioning in throttling are single acting for Type 1051
applications. and 1052 actuators, and the
3610JP and 3620JP positioners
The positioners provide accurate, are double acting for Type 1061
fast response and can withstand actuators.
the vibrations in most plants.
Options...H Supply pressure
gauge, H Tire valves for clip-on
W4920-1* gauges, and H Integrally mounted
bypass valve for single-acting
actuators
Typical 3622 Electro-Pneumatic Converter Certifications (The Converter is Part of 3620J Positioners)
INTRINSIC
EXPLOSION-
INTRINSIC SAFETY SAFETY OR FLAMEPROOF DIVISION 2
PROOF
NON-INCENDIVE
CSA(1) or
PTB SAA LCIE SSA CSA FM CSA or FM
FM(1)
EEx ia IIC
T6 (Tamb 50_C) Class I,
Class I Division 2, Class I Division 2, Class I Division 1
IK=120mA Division 1,
Ex ia IIC T4 EEx d IIC T6 Groups A, B, C, D Groups A, B, C, D Groups A, B, C, D
T5 (Tamb 50_C) Groups(1) A, B, Ex d IIB T6
Ex n IIC T4 (Tamb 40_C) Class II, Division 2 Class II, Division 2 Class II, Division 1,
IK=150mA C, D
Groups E, F, G Groups F, G Groups E, F, G
T4 (Tamb 80_C) T5
IK=150mA
1. Contact your nearest sales office for the appropriate FM entity ratings and CSA parametric ratings for each group.
11
Product Flier PF51.3:Vee-Ball
Other Accessories
Type 3065 Limit Switch Box Certifications...CE Mark to EMC
The limit switch box can be directive H EN 50081 and
installed on the actuator to hold H EN 50082
proximity or microswitches, which
can turn on an alarm or display Self-Adjusting...Complicated
device when a pre-set limit is adjustments are not required.
reached. Additional
microswitches are available. Standardized Installation...
Covered by IEC 60534-6
The device has separate cams (NAMUR). The box can be
for open and closed positions, supplied with a mounting kit.
and adjustment of one cam does W6682B
12
Product Flier PF51.3:Vee-Ball
Other Accessories (Continued)
Type 67CFR
Filter-Regulator...The Type
67CFR provides constantly
controlled supply pressure to
actuator accessories system. This
regulator features an internal filter
and limited-capacity internal relief,
allowing partial reduction of
downstream pressure.
W7412 W4727
Type 646 or 846 Electro- for intrinsic safe and flameproof Others...H High-pressure supply
Pneumatic Transducers...These ratings. pressure regulators, H proximity
transducers convert a standard 4 switches, H microswitches, and
to 20 mA dc signal to a Type 2625 Volume H solenoid valves.
proportional pneumatic signal. Booster...The volume booster
Certifications are H CE Mark to can be used in conjunction with a Contact your nearest sales office
EMC directive (electromagnetic positioner to increase actuator for more information.
compatibility); stroking speed.
H Contact your nearest sales
office
13
Product Flier PF51.3:Vee-Ball
Maximum Inlet Pressure for CW2M (Hastelloy C) Valve Bodies
MAXIMUM INLET
TEMPERATURE, _C
C PRESSURE, BAR NOTE
150 300 600
CW2M is not listed in ASME
–46 to 38 20.0 51.7 103 B16.34. The designations 150,
93 17.9 51.7 103 300, and 600 indicate relative
149 15.9 50.3 100 pressure-retaining capabilities
204 13.8 48.6 97.2 and are not ANSI
232 12.8 47.2 94.5 pressure-temperature rating
classes.
Pressure Drop in Bar (For HD Metal Seal, Pressure Drops are for Forward Flow Only. For Reverse HD Seal Flow, Limit
Pressure Drop to 6.9 Bar)
VALVE SIZE
BEARING TEMPER
TEMPER- 1 1-1/2 2 3 4 6 8 10 12 14 16 20
BALL SEAL
MATERIAL ATURE, C DN DN DN DN DN DN DN DN DN
--- --- ---
25 40 50 80 100 150 200 250 300
-46 to 38 51.0 51.0 51.0 51.0 51.0 51.0 51.0 40.2 37.6 31.0 23.8 31.0
93 37.9 37.9 37.9 37.9 37.9 37.9 37.9 37.9 37.6 31.0 23.8 31.0
TCM Plus 149 24.1 24.1 24.1 24.1 24.1 24.1 24.1 24.1 24.1 24.1 23.8 24.1
204 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3
PEEK/PTFE
232 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45
HD Metal -46 to 288 51.0 51.0 51.0 51.0 51.0 51.0 51.0 40.9 38.1 40.3 26.5 40.3
Flat Metal -29 to 260 --- --- --- 20.7 20.7 20.7 20.7 10.3 10.3 --- --- ---
Flow Ring --- 99.3 99.3 99.3 99.3 72.4 75.2 73.8 40.5 37.7 40.5 35.0 44.7
HD Metal -46 to 288 51.0 50.0 25.7 17.5 11.0 10.9 11.2 6.14 5.72 6.14 7.52 6.83
R30006 Flat Metal -29 to 260 --- --- --- 17.0 10.1 10.7 10.6 5.86 5.52 --- --- ---
Flow Ring --- 74.5 49.6 26.8 18.8 10.9 11.2 11.1 6.07 5.65 6.07 7.31 6.69
HD Metal -46 to 288 51.0 51.0 51.0 35.0 22.1 21.8 22.5 12.3 11.4 12.3 13.2 13.7
R30006 Silver
Flat Metal -29 to 260 --- --- --- 20.7 20.1 20.7 20.7 10.3 10.3 --- --- ---
Plated
Flow Ring --- 99.3 99.3 53.5 37.6 21.8 22.5 22.2 12.1 11.3 12.1 14.6 13.4
HD Metal -46 to 288 51.0 51.0 51.0 --- --- --- --- --- --- 20.5 13.2 14.0
S44004 Flat Metal -29 to 260 --- --- --- --- --- --- --- --- --- --- --- ---
Flow Ring --- 99.3 99.3 88.9 --- --- --- --- --- --- 20.2 20.1 22.3
HD Metal -46 to 288 --- --- --- 51.0 36.7 36.3 37.4 20.5 19.1 --- --- ---
S31600L
Flat Metal -29 to 260 --- --- --- 20.7 20.7 20.7 20.7 10.3 10.3 --- --- ---
Nitride
Flow Ring --- --- --- --- 62.7 36.3 37.4 37.0 20.2 18.8 --- --- ---
14
Product Flier PF51.3:Vee-Ball
Flow Coefficients
15
Product Flier PF51.3:Vee-Ball
Actuator-Valve Selection (Shutoff Pressure Drops)
Note Contact your sales office Do not exceed any other limits
for other sizes and presented in this flier. Following is
The intent of the operating pressures. a brief reminder of some of those
actuator-valve selection limits:
tables is to present an With rotary valves, the highest
actuator size that will pressure drop occurs when the Maximum Shutoff Pressure
control a relatively high valve is shut off. When the valve Drop...Do not exceed any of the
valve pressure drop with a is open, pressure drop is normally pressure drops in this table or in
standard actuator much lower. However, pressure the Maximum Allowable Shutoff
operating pressure. It is drop capabilities of a rotary valve Pressure Drops section.
not implied that the also are lower when the valve is
selection shown is best open. The allowable flowing Maximum Inlet Pressure and
for your application. pressure drop across a valve Temperature...Do not exceed the
depends on the valve maximum pressure rating of the
For pressure drops lower construction, valve position, the valve. Refer to the Body
than those shown, a lower type of flowing fluid (liquid or Materials, End Connections, and
actuator pressure or gas), and on the vapor pressure Ratings section.
smaller actuator might be and critical pressure ratio of
satisfactory. liquids. Materials Temperature
Limits...Refer to the Valve
For pressure drops higher Only allowable shutoff pressure Materials and Temperatures
than those shown, a drops are shown here. To section, the actuator
higher operating pressure determine the allowable flowing specifications tables, and the
or larger actuator will be pressure drop, provide your sales accessories specifications tables.
required. office with your application Some of the critical limits are
pressures, temperatures, and repeated here.
pressure drops.
16
Product Flier PF51.3:Vee-Ball
Actuator-Valve Selection (Forward Flow)
Type 1052 Actuator
BEARING AIR TO OPEN (PUSH-DOWN-TO-OPEN) AIR TO CLOSE (PUSH-DOWN-TO-CLOSE)
AND SEAL VALVE SIZE Actuator Pressure Pressure to Actuator Actuator Pressure Pressure to Actuator
MATERIAL Size Drop, Bar Bar Psig Size Drop, Bar Bar Psig
DN 25 1 20 51.0 0 to 1.2 0 to 18 20 51.0 0 to 1.2 0 to 18
DN 40 1-1/2 20 51.0 0 to 1.2 0 to 18 33 51.0 0 to 1.2 0 to 18
DN 50 2 33 51.0 0 to 1.2 0 to 18 33 51.0 0 to 1.2 0 to 18
PEEK DN 80 3 33 51.0 0 to 1.2 0 to 18 40 51.0 0 to 1.2 0 to 18
Bearings with DN 100 4 40 51.0 0 to 1.2 0 to 18 40 51.1 0 to 1.2 0 to 18
Composition
Seal DN 150 6 60 51.0 0 to 1.2 0 to 18 60 43.3 0 to 1.2 0 to 18
DN 200 8 60 51.0 0 to 1.2 0 to 18 60 51.0 0 to 2.3 0 to 33
DN 250 10 70 51.0 0 to 2.3 0 to 33 60 51.0 0 to 2.3 0 to 33
DN 300 12 70 46.9 0 to 2.3 0 to 33 70 51.0 0 to 2.3 0 to 33
PEEK DN 50 2 20 51.0 0 to 1.2 0 to 18 33 51.0 0 to 1.2 0 to 18
Bearings with DN 80 3 33 51.0 0 to 1.2 0 to 18 40 51.0 0 to 1.2 0 to 18
HD DN 100 4 40 51.0 0 to 1.2 0 to 18 40 51.0 0 to 1.2 0 to 18
(Heavy-Duty) DN 150 6 60 51.0 0 to 1.2 0 to 18 60 51.0 0 to 1.2 0 to 18
Metal Seal DN 200 8 70 51.0 0 to 2.3 0 to 33 60 51.0 0 to 2.3 0 to 33
(Lubricated DN 250 10 70 51.0 0 to 2.3 0 to 33 70 15.3 0 to 2.3 0 to 33
Service) DN 300 12 70 35.2 0 to 2.3 0 to 33 70 26.5 0 to 2.3 0 to 33
PEEK DN 50 2 20 51.0 0 to 1.2 0 to 18 33 51.0 0 to 1.2 0 to 18
Bearings with DN 80 3 40 51.0 0 to 1.2 0 to 18 40 51.0 0 to 1.2 0 to 18
HD DN 100 4 40 51.0 0 to 1.2 0 to 18 60 51.0 0 to 1.2 0 to 18
(Heavy-Duty) DN 150 6 60 51.0 0 to 1.2 0 to 18 60 51.0 0 to 1.2 0 to 18
Metal Seal DN 200 8 70 51.0 0 to 2.3 0 to 33 70 51.0 0 to 2.3 0 to 33
(Non-Lubricated DN 250 10 70 51.0 0 to 2.3 0 to 33 70 43.6 0 to 2.3 0 to 33
Service) DN 300 12 70 26.6 0 to 2.3 0 to 33 70 18.1 0 to 2.3 0 to 33
DN 25 1 20 20.7 0 to 1.2 0 to 18 33 20.7 0 to 1.2 0 to 18
DN 40 1-1/2 33 20.7 0 to 1.2 0 to 18 33 20.7 0 to 1.2 0 to 18
DN 50 2 33 20.7 0 to 1.2 0 to 18 33 20.7 0 to 1.2 0 to 18
PEEK DN 80 3 40 20.7 0 to 1.2 0 to 18 40 20.7 0 to 1.2 0 to 18
Bearings with DN 100 4 60 20.7 0 to 1.2 0 to 18 60 20.7 0 to 1.2 0 to 18
Flat Metal
Seal DN 150 6 60 20.7 0 to 1.2 0 to 18 60 20.7 0 to 2.3 0 to 33
DN 200 8 60 20.7 0 to 2.3 0 to 33 60 20.7 0 to 2.3 0 to 33
DN 250 10 60 10.3 0 to 2.3 0 to 33 60 10.3 0 to 2.3 0 to 33
DN 300 12 70 9.3 0 to 2.3 0 to 33 70 7.5 0 to 2.3 0 to 33
DN 25, 40 1, 1-1/2 20 51.0 0 to 1.2 0 to 18 20 50.1 0 to 1.2 0 to 18
DN 50 2 20 51.0 0 to 1.2 0 to 18 33 50.1 0 to 1.2 0 to 18
PEEK DN 80 3 33 51.0 0 to 1.2 0 to 18 33 50.1 0 to 1.2 0 to 18
Bearings with DN 100 4 40 51.0 0 to 1.2 0 to 18 40 50.1 0 to 1.2 0 to 18
Flow Ring DN 150 6 60 51.0 0 to 1.2 0 to 18 60 50.1 0 to 1.2 0 to 18
Construction DN 200 8 60 51.0 0 to 1.2 0 to 18 60 50.1 0 to 2.3 0 to 33
DN 250 10 70 51.0 0 to 2.3 0 to 33 60 50.1 0 to 2.3 0 to 33
DN 300 12 70 51.0 0 to 2.3 0 to 33 70 50.1 0 to 2.3 0 to 33
17
Product Flier PF51.3:Vee-Ball
Actuator-Valve Selection (Forward Flow—Continued))
Approximate Weights
Weights are in kilograms and are for valve and actuator combined. Not all possible valve and actuator size
combinations are shown.
18
Product Flier PF51.3:Vee-Ball
Dimensions
For Design V150 and V200 valves through DN 300 (12 inches), the
standard face-to-face dimension is IEC 534-3-2 (ISA S75.04). The
optional face-to-face dimension for these sizes is ISA B16.10 Short.
The face-to-face dimension for DN 350 and DN 400 (14 and 16
inches) is ISA B16.10 Short. The face-to-face dimension for DN 500
(20 inches) is 508 mm. Face-to-face dimensions for DIN versions of
these valves are the same as for the ANSI versions and might not
conform to any standard other than those mentioned here.
A6901/IL
19
Product Flier PF51.3:VeeĆBall
For Further Information, Contact...
AUSTRIA GERMANY SLOVAK Rep
FisherĆRosemount FisherĆRosemount FisherĆRosemount
Industrie Ć Zentrum No Mannheimerstr. 63 Hanulova 5/b
Sud Straße 2a, obj M29 DĆ67071 Ludwigshafen SRĆ 84101 Bratislava
AĆ 2351 Wr. Neudorf Telephone +49.0621.6811.0 Telephone +421.07.787.811
Telephone +43.2236.607 Fax +49.0621.6811.359 Fax +421.07.787.245
Fax +43.2236.60744 GREECE SLOVENIA
BELGIUM T.C.B. MIR
FisherĆRosemount 44, Pentelis str. Strmeckijeva 16
De Kleetlaan 4 GRĆ17564 FaliroĆAthens SlĆ8270 Krsko
BĆ1831 Diegem Telephone +30.1.80.33.652 Telephone +386.608.231.470
Telephone +32.2.716.77.11 Fax +30.1.80.33.819 Fax +386.608.231.471.
Fax +32.2.725.83.00 HUNGARY SPAIN
BULGARIA FisherĆRosemount FisherĆRosemount
Process Control Ersébet Királyné útja 1/c Ctra FuencarralĆAlcobendas
Tzarichina Str.1 HuĆ 1146 Budapest Km 12.2; Edificio Auge 1
BGĆ 1505 Sofia Telephone +36.1.462.40.00 EĆ28049 Madrid
Telephone +359.2.70.35.49 Fax +36.1.343.01.73 Telephone +34.1.358.91.41
Fax +359.2.75.91.43 Fax +34.1.358.91.45
ITALY
: fr.spain@frco.com
CIS FisherĆRosemount
FisherĆRosemount Via dell' Artigianato 8/12 SWEDEN
Malaya Trubetskaya IĆ20053 Muggió (Mi) PEAB
Street 8 Ć 11th floor Telephone +39.39.2.278.0590 Ilanda Gård 120
CISĆ119881 Moscow Fax +39.39.2.270.2302 S Ć 65350 Karlstad
Telephone +7.095.232.69.68 Telephone +46.54.53.07.50
NETHERLANDS
Fax +7.095.232.69.70 Fax +46.54.53.18.51
FisherĆRosemount
CROATIA Patrijsweg 140 SWITZERLAND
FisherĆRosemount NLĆ2289 EZ Rijswijk FisherĆRosemount
Berny Commerce Telephone +31.70.413.66.66 Blegistr. 21
Zagorska 27 Fax +31.70.390.68.15 CHĆ6341 Baar
10000 Zagreb Telephone +41.41.768.61.11
NORWAY
Telephone +385.1.305.071. Fax +41.41.761.87.40
SAAS SA
Fax +385.1.33.59.25 Postboks 6500 Etterstad TURKEY
CZECH Rep Grenseveien 95 FisherĆRosemount Proses Kontrol
FisherĆRosemount NĆ 0606 OSLO Kisikli Caddesi
Volsinách 75 Telephone +47.23.19.30.00 Basaran Ap. N 3 Kat2
CzĆ 100 97 Praha 10 Fax +47.23.19.30.96 81130 Altunizade
Telephone +420.2.810.026 66 TRĆ Üsküdar Istanbul
Fax +420.2.810.026.70 Telephone +90.216.492.40.42Ć46
POLAND
Fax +90.216.492.40.47
DENMARK FisherĆRosemount
FisherĆRosemount Al. Wilanowska 272 UKRAINE
Hejrevang 11 PLĆ 02665 Warszawa FisherĆRosemount
DKĆ3450 Allerød Telephone +48.22.85.73.766 Tereschenkovskaya St. 13,
Telephone +45.48.17.03.33 Fax +48.22.85.73.856 Rm. 58
Fax +45.48.17.02.44 252004 Kiev
PORTUGAL Telephone +38.44.246.46.56
FINLAND FisherĆRosemount
Fax +38.44.246.46.58
Oy ValmetĆRosemount Rua Alfredo da Silva 8
Sinimaentie 10B PĆ2720 Alfragide UNITED KINGDOM
FIN Ć 02630 Espoo Telephone +351.01.471.28.850 FisherĆRosemount
Telephone +358.9.523.500 Fax +351.01.472.88.55 Horsfield Way
Fax +358.9.523.997 Bredbury
ROMANIA Stockport SK6 2SU
FRANCE and MIDDLE EAST FisherĆRosemount Romania UK
FisherĆRosemount Calea Floreasca No. 91Ć11 Telephone +44.161.406.8826
2, place Gustave Eiffel BL. F1, Tronson 5. AP.44
Fax +44.161.406.8827
Silic 247 Sector 1
FĆ 94568 Rungis ROĆ71401 Bucharest
Telephone +33.01.49.79.73.00 Telephone +40.1.230.41.49
Fax +33.01.49.79.73.99 Fax +40.1.230.05.01
These products may be covered by one or more of the following patents: (4,519,579; 4,129,625; 5,131666; 5,056,757; 5,230,498; and 5,299,812) or under pending patents.
CamĆVeeĆBall, ENVIROĆSEAL, FIELDVUE, FloVue, Fisher, FisherĆRosemount, Managing The Process Better, ValveLink and VeeĆBall are marks owned by Fisher Controls International,
Inc. or FisherĆRosemount Systems, Inc. HART is a mark owned by the HART Communications Foundation. All other marks are the property of their respective owners.
Printed in U.S.A.