You are on page 1of 14
CPt) EDOSE-08-8 EMRE History of revisions ASCP AE DEE ie FoR Date Deseription Aayproved wy | Prepared by T change Fam the frat veron BDOE.ETE | — 206.2.14 eng | 2008. _ | 1Pacing stration for Pati. ‘AVG RM A 3.07 SEHR TERRE +e aH ‘Rioaly Protection Tape 3007-118 —} goon 14 Ver,3 | 2008. 7,3 Parts name marking (Bar-code label) LP r'yd Lisa 3/10 | Change CELL CODE 1-T66-378-L => 1-765-378-12 aie as leek “aa SONY paris name sooo | US tisoebitn ae amas: | 299,300 SONY parts number “Py Verd (0327 | p-aggi-157-0 eatin a i 7.3 Parts name marking +R US-T1S0GDVTH(AE) “Arenson speclfcations wlaon SONY ports name US-isucDVTL E SONY parts code F-49181 1LPacking "Ti Packing lntrction Tals Beat transport specieations Teac 2009.92 2009.9. vers | 75 | 72 mining lnsreton for Master coon SEND LP Pack | SEND LID 712.1 Boat transport spei8etions Sanpei Kate 1.2.2 alr teaneportspetestions 7.8 Parts anne marking 7.1 Best uensport specications 7.32 Alrteansprtsoeifenions 114 Packing nsruton for Pll 74.1 Bost anspor epeioations 714.2 Air eanoporeapectcations ‘Additional. SONY pats name US-TLBOEMVT US-TISOEMVTL WG US-TLSOBMVTI & é SONY paris number vers Fe4979-541-0 2009.10.18 | 2009.10.18 2008. F-4973-542-0 SEND LP Pack SEND 113 10.8 F-4973-543-0- Kato 7.3 Pats name making US-TISOEMVTIE) US-TLS0EMVTICWO) US-TLSOBMVTIO) Indleation change “ia Pking Intrvcton for Palle. Tall top cover materl change Vee? 4.52 ingedance speciation 2000 More than 26m Less than 30m0 11d 55 More than 19m Less than 29m . /\ +13. Parts name marking 2.2 (CELL CODE 1-755-378-12 ») apy Fans ees — ver. Sony Energy Devices Corporation Spec. No._| XU20775 | Ver | 7 | Spec. page | 215 spose C46 ) Contents 1.General 1.1 Scope a : oe 1.2 Product Category... i nants om 1.3 Model Name... 1.4 Applicable Safety Standard, eh 2. Cell Rating 2.1 Nominal Capacity 2.2 Minimum Capacity 2.3 Nominal Voltage. 2.4 Charge Voltage . 2.5 Cut OFF Voltage nnn 2.6 Maximum Charge Voltage... 2.7 Continuous Maximum Charge Current... 2.8 Continuous Maximum Discharge Current 2.9 Weight... 2.10 Allowable Cell Surface Temperature... 3. Shape / Dimension and Appearance : ee a 3.1 Shape/Dimension 3.2 Appearance. 4, Performance 4.1 Standard Test Condition 4.2 Testing Instrument or Apparatus 4.3 Standard Charge definition 44 Standard Discharge definition. 4.5 Electrical Performance. 4.6 Mechanical Performance... 5. Waning and Recommendation for Using the Lithium Ion Rechargeable Battery. 511 Prohibition Clause nnnnns 5.2 Charging, 5.3 Discharging 5.4 Storag a 5.5 Safety Design ...... 5.6 Recommended Block diagram for Safety Design 5.7 Pack Assembly... ae aeceee 5.8 Identification and Marking... 6. Outline... 7. Packing. : 9 7.1 Packing Instruction 9~10 7.2 Printing Instruction for Master Carton n~12 7.3 Parts name marking, 3~14 7.4 Packing Instruction for Pallet... of : 15 abt RES a ‘Sony Energy Devises Corporstion Spec.No._ | 10,0CA(10.0A) discharge at 2.5V , afer 250cycles tym Rant TREE? | xo | ve.) 7 [ERE ‘Sony Energy Devives Corporation Spec. No. Spec.page | 15 CTA6) EDOSE-08-8 F55 Discharge capacity by | The capacity discharged under the ambient More than the ‘Temperature. temperature listed below after standard charge Value in the left Table. Discharge Discharge Temperature Capacity 4.0CA(4.0A)2.5V Cutoff 20°C (672mAh Charge 0c 820mAh, 4.0CA(A.OAVO.1A Cutoff in ‘60mAR 45 960mAh “5.6 Heat shock “The battery pack shall be standard charged. No Leakage ‘Then it shall be stored during 10 eyeles of the following temperature cycle. G0, 2h —— -20T, 2h 4.6 Mechanical Performance Item Condition Specification The battery pack shall be standard charged and tested | No Teakage. een Unde the following condition ae : 860mAb Frequency and acceleration :10~6082, 2.16 Frequency and acceleration :60~80Hz, 1.4G Frequency and acceleration :80~100Hz, 0,76 Frequency and acceleration :100~125Hz, 04G Smin, sweep, 1 hour for each axes ‘After the first standard discharge and standard charge, the capacity ofthe second discharge must be ‘more than data in the right specification column, 5. Waming and Recommendation for Using the Lithium lon Rechargeable Battery 5.1 Prohibition Clause *Do not solder lead directly to the cell body. *Do not short (+) and (-) terminal of the cell with a ind of meta. *Do not throw the cell into fire, nor heat the cel. “Do not add strong shock, nor drop the cell *Do not stub the cell with a nal etc., nor make a hole in the cell “Do not put into a microwave oven, nor high temperature container. “Do not leave the cell in a place of high temperature. *Do not connect cell to wall sockets and cigarette wall sockets ete. in vehicle. 5.2 Charging Charge within the limits of 0°C ~ +45°C cell surface temperature. “Do not charge reversal. Charge only with charger exclusively designed for this battery. EP FS A COS RES Sony Energy Devices Corporation Spee.No,_ | KU20773 | Ver.]_ 7 | spec. page _|_ 15 Cony EDOSF-08-8 5.3 Discharging “Discharge within the limits of -20°C ~ +60°C. cell surface temperature. *Avoid discharging below 2.5V. Discharge within a designated current. Use only as a power source for a designated device, 5.4 Storage +Store in less than 20°C ambient temperature area , and condition in container is also included. “Use within 3 months ( 90 days ) after shipping 5.5 Safety Design (ref. Fig.1 Block diagram of batteries for PCs) ‘The battery must shall three functions of Safety Design as follows. -Qver-charging protective design Open circuit voltage of cell shall be less than 4.1Svolts per each cell at any condition, +Over-discharging protective design. The over-discharging protective circuit shall operate at 2.0 to 2.5 volts, then the discharge current shall decrease to less than 10 micro amperes. ~ Excessive-current protective design. ‘The protective circuit shall operate at charging or discharging at over 10 C continuous current. ‘The protective design to nish current and short terminal of battery current shall be required. 5.6. Recommended Block diagram for Safety Design Depending on the battery pack configuration and charge/discharge conditions, certain safety components may be omitted. fiat oh i ae Microprocessor Dats Clock DawaeCLK EPROM] Fig.1 Block diagram of batteries for PCs. 5.7 Pack Assembly “Use the same Lot Number(the Last 5 letters and figure) cells in a pack. pirate REBT cvao7 [ven | 7 [ERT ng spec. page Sony Energy Devices Comporation Spec. No. EDOSE-08-8 ¢ Vy 1b) 5.8. Identification and Marking (Lot Number Definition: Manufacturing Date of Cells) ‘The code is printed on a surface of the can, under the tube, at two lines. 5.8.1 Manufacturer (Trade name) SE (Trade name of Sony Energy Devices Corp.) SE USxxxxxxx 5.8.2 Trade Mark (fig.2: USxxxxxx) A HHRELYMDDS US18650VT Fig.2 5.8.3 Manufacturer (plant) (fig.2: A) K--Sony Energy Devices Corp. Koriyma Plant. T: Sony Energy Devices Corp. Tochigi Plant. 5.84 Specification (fig2.: HH) VTI(Print:T1) 5.8.5 Lot Number (Manufacturing Date of Cells : YMDDS) Y:Year 92 as A, Every next year is counted as B, C,... (Using an Alphabet letter) M:Month January as A, the consecutive month as B, C,... (Using an Alphabet letter) D:Day 01, 02, 29,3031 (Using figures) S:Blectrode History A,B,C, (Using an Alphabet letter) 5.8.6 Recognition Mark CE mark of the right side of Fig2 \6.Outline Flat area(g 10, 7) Diameter 3 3 é § a % :Size excluding wrinkle on the Tube. % :Printing in above is an example, FA aE RES REY Sony Energy Devices Corporation Spec. No. | €020773 | Ver.] 7 | spec. page | 8/15 eDosr-088 Cw 7. Packing ALY 7.1 Packing Instruction 7.1.1 Boat transport specifications Yamaha ERE S ERAS Sony Energy Devices Corporation spec.No._| KU20773 | Ver.] 7 | Spec. page | 915 EDOSF-08-8 Cuy4ig) Jamar ym FAA PRE TRSEE | cy Tea Sony Energy Devices Corporation Spec. No. |

You might also like