Professional Documents
Culture Documents
Product Information: © Chicago Pneumatic - 6159990070
Product Information: © Chicago Pneumatic - 6159990070
1
© Chicago Pneumatic - 6159990070
© Chicago Pneumatic – 6159990070 1
Product description Connected version
To unblock functionalities of CP86 connected versions C and CQ, download
CPLinQ to your device and connect your tool to CPLinQ app.
2
© Chicago Pneumatic - 6159990070
Installation & Operating Instructions
- Battery CP36XP25 (8940176068)
Battery wake up : Remove white protective sticker and plug the battery to
CP charger CP18-36CH (8940176069).
3
© Chicago Pneumatic - 6159990070
Starting the tool
WARNING Crushing Hazard
Fit the tool with a suitable socket.
Hold the tool by means of the handle, place the reaction bar on a suitable
reaction point and apply to the fastener to be tightened.
► Keep your hands away from the reaction bar while the tool is used.
WARNING Risk of Burns
► Press triggers to start the tool
► Wear gloves.
4
© Chicago Pneumatic - 6159990070
Operating the tool
Battery level
Second start Bluetooth connection (C,CQ
button version)
Tool Application
nam information
Action for Stand alone C,CQ version
button
Button for menu
navigation and action
Torque set up
FORWARD
5
© Chicago Pneumatic - 6159990070
Stand alone tools menu
6
© Chicago Pneumatic - 6159990070
Maintenance menu
7
© Chicago Pneumatic - 6159990070
Tools information menu
8
© Chicago Pneumatic - 6159990070
Units selection menu
9
© Chicago Pneumatic - 6159990070
Troubleshooting
Press the second trigger first (1) The nutrunner needs a Contact service center
and maintain, then press main maintenance due to
Triggers have been trigger (2) and maintain both time of operation
used in bad order until end of tightening (refer to
product description)
10
© Chicago Pneumatic - 6159990070
The tool is unable 1. Check if you are using
Replace battery by fully loaded to communicate with the right Battery
Level of battery is battery, tool will turn off (refer the battery. (8940176068)
under 5% to battery wake up procedure if 2. If the problem occurs
needed) again, contact your CP
representative for
support.
11
© Chicago Pneumatic - 6159990070
Service & maintenance
Overhaul and preventive maintenance are recommended at regular
intervals.
The use of spare parts other than those originally supplied by the
manufacturer may result in a drop in performance or in increased
maintenance and level of vibration and in the full cancellation of the
manufacturer’s liability.
For tool calibration or all other servicing operation, refer to your local
service center.
12
© Chicago Pneumatic - 6159990070